Modules & VBA :: Office 14.0 Object Library Causes Freezes

Oct 23, 2014

I have VBA code that makes use of the Microsoft Office 14.0 Object Library, but if I have this selected whenever I try to do anything in the Form Design view it is constantly freezing. It will literally say not responding" for a minute or so then I will have control again.

View Replies


ADVERTISEMENT

Object Library Not Registered/ActiveX Component Can't Create Object

Jun 9, 2005

Hello

I am using Access 2003(11.6355.6360) SPI

When I attempt to create a new DB - by performing Blank Database I immediately get a message 'Object Library not registered'.

If I 'OK' that box and try to create a table, I can do so - create Table in design view.

When I then try to Import external data - an excel file I get the message 'ActiveX component Can't create object'.

I have looked ob various sites for help and forum information regarding these errors but have found nothing conclusive, with specidfic regard to Access 2003.

The version has been loaded on my machine about 1 year as part pf Office Professional but this is the first time I have attempted to run Access itself.

Does any forum member have any ideas as to how this problem could be resolved.

Thank You

Rgds

Paul Langham

View 1 Replies View Related

DAO Object Library - Not Sure What It Is

Feb 16, 2008

Hi,

I've downloaded a database which creates cascading combo boxes; it's called CreateCascadeCombo, for which I am grateful to whoever took the trouble to create it.

However, after it has done it's work and vreates the form in my own datbase, it says to make sure the latest DAO Object library must exist in the same database. How do I ensure that is is? I'm using access 2003.

View 2 Replies View Related

Ms Access 9 To 10 Object Library

Oct 25, 2007

I created an app that used the 10.0 library and a field office that recieved the app is using the 9 library. They are having difficuties getting buttons on forms to work. They are getting a 2580 error something about the SELECT statement. Could the library be the problem and if so is there someway I can save mine using the 9 so it will be compatible?
Thanks.

View 14 Replies View Related

Microsoft Office OLE Object

Feb 2, 2005

I had a Label in the form that when i started design the Form, I supposed that will be permanent.
After few records, users needed to change the Text on that Label depending the customer they reffer to.
Therefore i attached a Microsoft Word Document OLE Unbound Object to give permission to users to change
the text when they need it.
But if u change the text in one record then will change to all of the other records.
Can u give any idea how i will manage to have a default label for all the records and users when they need
to change the Text only for a particular record.
Is this possible? Or I need to declare it as a Field on a Table therefore can be saved in every record?
Please any idea...
Thank you

View 8 Replies View Related

Automatic Link To DAO 3.6 Object Library

Feb 1, 2006

If this post is in the wrong place please feel free to move it. My Question concerns MS ACCESS and the DAO 3.6 Object Library. The Version of Access in use is "Microsoft Access 2000 SR1".

My database resides on a server and people can log in to the database from terminals which may not have "MS DAO 3.6" linked as a reference within the version of Access installed on the terminal. How can my database (on opening) check the machine it is opened on, to see if that machine has the "Microsoft DAO 3.6 Object Library" linked as a reference. And if DAO3.6 is not linked, to set up a link.

Currently I have to manually set a link from tools/references within the VB window on any Terminal that opens the database. I need this DAO library linked for the database to work properly.

any help is appreciated, thank you :)

View 2 Replies View Related

Include Object Library With Runtime.

Sep 15, 2006

I have an application which includes a process that creates an excel sheet with some data. For this I have set reference to the excel object library. I am now packaging a demo of the application with Office Developer and including Access runtime. The question is what to do about this reference, since when I look at the file that it uses, it shows Excel.exe. I don't suppose I can legally be sending that file along with my program. Is there a different reference that I could set that would give me what I need? I noticed this in testing because it is the only reference file that wasn't automatically included in the package.

Thanks,
Tom

View 1 Replies View Related

Forms :: VBA Compiler Error Can't Find Object Or Library

Nov 4, 2014

I have a program running with VBA coding, whereby the user enter a password which then sets the field attributes to enable the user to change them.

This is working on my laptop, on the client's LAN, it also worked through REMOTE DESKTOP, but the Head Office installed new PCs and now the REMOTE DESKTOP cause a problem.

View 4 Replies View Related

Office 2000 To Office 2003

Sep 1, 2007

My office is upgrading from office 2000 to 2003 this weekend. Should I run the

"Tools - Database Utilities - Convert Database - To Access 2002 2003 Format"

I have about 10 small databases various users access. Is it good practice to run this or just keep it in an office 200 format? Thanks.

View 8 Replies View Related

Modules & VBA :: Setting Up Database Library File

Jul 28, 2013

I am using Access 2010.

I want to set up a Library File containing code that I can call from numerous access databases.

I try to make reference to the newly created Library.accdb file in Tools - References and get the error message: Name conflicts with existing module, project or object library.

I have checked the names of all of these and there does not appear to be a conflict.

View 1 Replies View Related

Modules & VBA :: Error Message - Can't Find Project Library

Feb 10, 2015

i have the following code and i have the below error:

can't find the project or library in red part

Code:
Option Compare Database
Option Explicit
Function DatumUmwandeln(Datumstring As Variant) As String
Dim Monat, Tag, Jahr As String
If Datumstring <> "" Then
Tag = Format$(Datumstring, "dd")

[code]....

View 14 Replies View Related

Modules & VBA :: Automation Error Library Not Registered Message

Jun 2, 2014

I am running Office 2010 but at one time also had Office 2013 installed on my Windows 7 64 bit OS PC. The first attachment (AccessProblem) shows the error message that I get when it hits the

Set olApp = CreateObject("Outlook.Application")

line. I get the automation error - library not registered error. The second attachment (Access2Problem) shows the references that I have.

View 2 Replies View Related

Modules & VBA :: Microsoft Office Can't Find The Field StartDate

Feb 18, 2015

I have a main form that has a combo box (cboCurrentEmployeeName) to select an Employee Name. And then there is a subform within the same form that displays the list of active tasks.The record source for the subform is a query. The query is as follows. Please note that the tables are joined on employee-id and not the employee name.

SELECT TasksEntries.Project, TasksEntries.Task, TasksEntries.StartDate, TasksEntries.Status FROM TasksEntries INNER JOIN (SELECT EmployeeId FROM Employees WHERE Employees.EmployeeName=Forms!frmMainForm!cboCurren tEmployeeName) AS EmpList ON TasksEntries.EmployeeId=Emplist.EmployeeId WHERE TasksEntries.Status<>'COMPLETE';

The names of the fields in the subform are Project, Task, StartDate, Status and these are present in the subform only and not on the main form..I added an after update event on the cboCurrentEmployeeName which is as follows

Private Sub cboCurrentEmployeeName_AfterUpdate()
Me("StartDate").Form.Requery
End Sub

When I select an employee name from the combo box I get a runtime error 2465: Microsoft office can't find the field StartDate referred to in your expression. I get the same error doesn't matter what field I use.

View 10 Replies View Related

Modules & VBA :: Compile Error In Format Function - Cannot Find Project And Library

Nov 18, 2014

Code:
Private Sub Form_Open(Cancel As Integer)
cboDateStart.Value = Format(Now() - 7, "short date")
...
End Sub

When I run procedure the Format is highlighted and popup error message:

Compile error: Can't find project or library

View 1 Replies View Related

Modules & VBA :: Office 2010 / Click Button Event Doesn't Run Code

May 27, 2014

In the Main Form , I have few buttons and I am writing the following code to open the right form when a button is clicked but unfortunately the code isn't doing anything. No form is opening. I am using MS office 2010.

Code:
Private Sub BtnOption_Click()
DoCmd.OpenForm "Form1", acNormal, , , acFormAdd, acDialog
End Sub
Private Sub Form_Load()
'Me!Label1.Caption = "Welcome " & Environ("username") & "!"

[code]....

View 14 Replies View Related

Design View Freezes

Jun 24, 2005

Hi,
When I click on a command button to print a report and there is no data, after the message there is no data cancelling report the tool bar freezes and I can't get into design view. I can't figure out what's causing this. Any help appreciated.
Thanks

View 8 Replies View Related

MS Access Freezes Making Mde

Nov 30, 2007

Ok, so I've converted the database to 2003, split the database, compacted and repaired, but when I go to make an mde of the fe, the system "hangs" I even let it run overnight with no results. There's no error messages, nothing.... it looks like it creates a temporary database called "db1" but it never completes the conversion. Any ideas? Am I missing something simple? I have a feeling I am.

View 2 Replies View Related

Access Screen Freezes Then The Forms Don't Work

Aug 9, 2005

This happened yesterday at work.

The access form froze and they could do other things but Access remained frozen. They logged off and when they went back in Access opened but none of the form buttons or links were working.

The database is not split because it is used only by one station at a time.

Has this happened to anyone and does anyone know the cause?

Five people were trying to fix it when I walked into work (5 people who no nothing about Access other than using that one database) and I couldn't get a straight answer.

Thanks
Kim

View 5 Replies View Related

General :: Database Freezes After Editing A Form

Aug 6, 2013

I have many forms in my database, three of which completely freeze the database if I edit the slightest thing on them. These forms are all the same, and are unique to any other type of form in my database.

An example of one of the forms is the following:

The form is an "Edit Record" form which allows the user to edit a record directly from a form without going into the table. It is only possible to bring up the edit form by going to the main navigation form that consists of various buttons which a user would press, in this case the user would press the "Edit Record" button. This brings up a unique search form that allows a user to search for a record to edit. The user types their search parameter into the form and once the "search" button is pressed it will bring up the record with all the details in a different form.

Note - The search form is linked to the table where the edit record form is linked to a query.

My problem is this:

I have three buttons on the form; Exit, Cancel & Finish Editing.

All I wanted to do was to ammend the code of the buttons so that "Finish Editing" wouldn't close the form onced pressed and that "Cancel" would simply undo the actions of the user instead of undo and then close the form.

I know exactly how to do the ammendments. But, once completed if you return to the main navigation and click on the "edit" button the search form appears and allows you to type in the search parameters, but once the "Search" button is clicked the search form closes and you are returned to the main navigation where you are unable to click anything in access or even close the programme.

View 3 Replies View Related

Queries :: Access Freezes When Switching To Design View In Open Query

Jul 22, 2013

My issue is that one of my queries can be run, opened in SQL view, but not opened in design view. When I attempt to view in design view, Access freezes and I am forced to close the program. My database is split, FE on my local, BE on another computer on my LAN.

Below is the SQL, I tried to just copy and paste this code into a new query and I encountered the same issue.

Code:
SELECT tbl_SurveyJobs.job_number, tbl_JobTypes.job_type_description, tbl_Clients.company_name, tbl_SurveyJobs.start_date, tbl_SurveyJobs.end_date, tbl_SurveyJobs.comments, tbl_SurveyJobs.contact_notes, tbl_SurveyJobs.regplan_number, tbl_SurveyJobs.sheet_number, tbl_SurveyJobs.mplan_number, tbl_SurveyJobs.lot_block, tbl_SurveyJobs.township, tbl_SurveyJobs.concession, tbl_SurveyJobs.township_lot,

[Code] .....

View 2 Replies View Related

Modules & VBA :: Object Variable Not Set

Nov 6, 2013

I am just in the middle of writting a little bit of code that will go through each record in a query and export it into a word table. It's in the early stages but all was working yesterday. I've come to it this morning and ran it and now I get an error message;Run Time error 91: Object Variable or With Block Variable not set.

Code:

Private Sub Command15_Click()
Dim MyDb As DAO.Database
Dim rsLogin As DAO.Recordset
Dim ObjHead As String
Set MyDb = CurrentDb()
Set rsLogin = MyDb.OpenRecordset("query here")

[code]....

View 2 Replies View Related

Modules & VBA :: Cannot Find Object

Nov 27, 2013

message "cannot find the object "." ". I have looked in the VBA for the Report I am working with and the form that has the underlying data and cannot find the rouge period! I am creating a label for payment envelopes that is gets its data from the form that indicates payments made

View 1 Replies View Related

Modules & VBA :: Can't Assign A Value To Object

Nov 15, 2013

I am trying to use Access 2007 popup calendar to populate a combo box with a selected date. When I select the date on the calendar the above error appears.

Code:

Private Sub Calendar9_Click()
'Set Date to the selected date and hide the clalendar.
MAssBDate.Value = Calendar9.Value
MAssBDate.SetFocus
Calendar9.Visible = False
End Sub

[code]....

View 2 Replies View Related

Modules & VBA :: Customize Object Name

Mar 17, 2015

When we use DoCmd.SendObject, the object name is always the same name of table, query or report.Can we customize object name to something else more descriptive? For example:

If I send the report "SalesPerSalesman" about John Smith,
the object name now is "SalesPerSalesman.pdf"
If i send the report "SalesPerSalesman" about Maryann Johns,
the object name would be again "SalesPerSalesman.pdf"

However , the object name I would like "SPS_JohnSmith.pdf"and the report for Maryann Johns, I would like as object name "SPS_MaryannJohns.pdf"

Syntax
DoCmd.SendObject ObjectType, ObjectName, OutputFormat, To, Cc, Bcc, Subject, MessageText, EditMessage, TemplateFile
ObjectName � Name of table, query, Report etc.

View 1 Replies View Related

Modules & VBA :: Cannot Assign A Value To This Object (Textbox)

Mar 27, 2014

Not sure whats going on here, nothing on the table that stops this from working. I just get Run-time error "2448 You can't assign a value to this object" When the code runs.

Code:
Private Sub Form_Open(Cancel As Integer)
Dim rst As DAO.Recordset
MySQL = " Select max(ID) from TblUserQry"
Set rst = CurrentDb.OpenRecordset(MySQL)
Myid = rst.Fields(0) + Int(Rnd(1) * 10)
Me.txtMyID.Value = Myid

End Sub

View 6 Replies View Related

Modules & VBA :: Query Object To Recordset

Oct 14, 2013

I am in the middle of creating a function that populates two unbound text boxes on a form and then uses those unbound textboxes in a query (Total of 3 unbound text boxes - 2 are populated from this function). The saved query object is working fine when I manually execute it (after the unbound text boxes have been populated). However, when I go to set the same query to a recordset I am getting the "Too Few Parameters. Expected 3." error message.

In the saved query I used the build function to use the unbound text boxes as part of the where clause. Below is the code I am trying to execute:

PHP Code:

Public Function Test()Dim db As DAO.DatabaseSet db = CurrentDbDim rst As DAO.Recordset
Dim DtBegin As String''FInd the Begin dtstBegin = DateAdd("q", -1, DateSerial(Year(Date), (DatePart("q", Date) - 1) * 3 + 1, 1))
Dim DtEnd As String''find the end dateDtEnd = DateAdd("Q", DateDiff("Q", 0, Date) - 1, 0)

[Code] ......

The unbound text boxes are populated before the query is set to the recordset.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved