Modules & VBA :: Open Form After INSERT INTO - Refresh Data In Table
Apr 16, 2014
Is there any possibilities to open form after INSERT INTO? I think Ms Access can't fast refresh data in the table after that, so form opens up clean:/
Code:
...
strSQL = "INSERT INTO tblZlecenia (id_zlecenia_info, DataPrzyjecia) VALUES ('" & ostateczne & "', Date())"
CurrentDb.Execute strSQL, dbFailOnError
DoCmd.OpenForm "Formularz2", WhereCondition:="ID_Zlecenia=" & ostateczne
View Replies
ADVERTISEMENT
Jan 31, 2014
Test findings showed that when I open a form the data does not update. I added a refresh action after the openform action. If I want to open three forms via the macro, do I need three refresh actions, one after each openform action, or simply a single refresh action that would apply to all three forms.
Scenario 1:OpenForm1, Refresh, OpenForm2 Refresh, OpenForm3, Refresh
Scenario 2:OpenForm1, OpenForm2, OpenForm3, Refresh
View 5 Replies
View Related
May 12, 2006
Hi all,
Not sure if this is in the right section but heres my question.
How can i gett a button to open a word document and put in specific information. for example. to send a client a letter, the button would open a word doc with the specfic client data in it.
Also a button to start a mail merge with all client records held on the db.
Thanks for any help
View 2 Replies
View Related
Jun 11, 2014
I have a table called "EquipmentRequired" which is populated by 4 append queries,
5000BaseReq, 6000BaseReq, 6000IFBBReq, EquipmentReq which get some of their information by counting fields in another table but all have the same field names.
The queries contain all data that is initially used to append new records to the table and this works fine.Unless some information changes or a record is added then I would like to add a button to a form and call it "update equipment" behind which would run a vba code firstly to delete all the records in "EquipmentRequired" table then run the 4 queries without the warnings and re-populate the table.
View 9 Replies
View Related
May 2, 2014
I am trying to use SQL to run queries in our access database in order to (hopefully) speed things up. I'm trying to create code that basically takes data from one table and inserts it into another whilst doing calculations on the data.
However I can't get past this:
Code:
Private Sub Test_Click()
Dim strSQL As String
strSQL = "CREATE TABLE [TempRedAmberGreen]" & _
"AS (SELECT " & _
"[ID_CHK] String," & _
"[Red] String," & _
"[Amber] String," & _
"[Green] String)" & _
"FROM [035 - Meter Point HH Data];"
DoCmd.RunSQL strSQL
End Sub
It keeps saying "Run-time error '3292': Syntax error in field definition.
View 4 Replies
View Related
Jun 4, 2013
I`m currently having the problem to export data from an SQL server into a table. I managed to open a recordset but I`m incapable of adding the recordset to an existing table. I found similar threads but I am still not able to generate functioning code.
Code:
Function fDAOServerRecordset()
Dim db As DAO.Database
Dim dblcl As DAO.Database
Dim rssql As DAO.Recordset
[code]....
View 2 Replies
View Related
Oct 10, 2013
Access 2010. Can vba code be written to delete and insert data from a table in one routine.
Something like Delete * Insert into select from where order by....
I tried it with a query but have to write two.
View 1 Replies
View Related
Jun 29, 2013
I am attempting to insert a record with selected data into a temp table and I am getting "Run-time error '3075': Syntax error in (comma)...". Here is the code:
Code:
Private Sub XferDataToTempTable()
Dim db As Database
Dim strSQL As String
Set db = CurrentDb
[code]...
View 7 Replies
View Related
Jun 29, 2014
I've got a form, user inputs a whole bunch of data and the data is stored into 2 different tables (using a form and subform), however i also need to copy a few fields from the subform into another table (as a new record) the table i intend to insert this data into (tblAdjustments) has four fields (that im interested in) Type, Reason, Quantity and Product (not the exact names) Type and reason are both just straight strings and will be the same each time, regardless of what the other two variables are, so i need type to equal "Finished Goods" and Reason to equal Produced further to that, the subfrom has 2 fields, batchPackedQTY (which will be quantity in the new table) and fgID (product in the new table
so i need an insert into statement that does this, ive tried INSERT INTO tblAdjustment (adjType, adjReason, fgID, adjQTY) ("Finished Goods", "Produced", Forms!SubFormBatches.fgID, Forms!SubformBatches.batchPackedQTY)
View 10 Replies
View Related
Sep 30, 2013
I am working on a database tool for quality team.
I have around 30 text box on a form and trying to insert the value of those 30 text boxes in a table from vba.
Here is my code
Private Sub Submit_Click()
Dim a, b, c, d, e, f, g, h, i, j, k, l, m, n, o, p, q, r, s, t, u, v, w, x, y, z, aa, bb, cc, dd As String
Dim SQL As String
a = Month
b = Week
c = Type_of_Contact
d = Country
[Code] ....
From above code I am not able to get my working done
Can we use a variable in referring a field in insert query?
I am using variable because I am not able to write the whole code in a single line and when i am pressing enter it gives me a error.
View 4 Replies
View Related
Jan 27, 2015
I'm trying to write some Code with the target to take a value from a textbox (out of a form) and a pregiven value (in this case = 2) and enter them in a new record in a table. But only if there is not already a record with the exact same combination of these to values. When done, the same button should proceed you to the next form (but this code is not already implemented in the fragment below) even if no values are added because they already exist in this combination.
Code:
Public Function GetID_PatientStudiesGroup&()
GetID_PatientStudiesGroup = [Forms]![frm_PatientStudiesGroupTZP]![ID_PatientStudiesGroup]
End Function
Private Sub BPRS_T1_Button_Click()
Call GetID_PatientStudiesGroup&
Dim strSQL As String
[Code] ....
As you can see, I tried to use a function to refer to the value out of the form, because I didn't find out how to refer to a form in an SQL Code.
Just to give you a better overview: The table where the information should be added is named "tbl_PatientStudiesGroupTZP". The form where you find the Textbox "ID_PatientStudiesGroup" (with the value I need to transport) is named "frm_PatientStudiesGroupTZP". Every part (except the WHERE NOT EXISTS part) worked perfectly for itself, but not when thrown together.
View 10 Replies
View Related
Jan 21, 2015
how to create a form in access to insert/update/delete data from a table in sql server?
View 4 Replies
View Related
Sep 12, 2014
How to make a form open with data from a table based on a date and time in the/a table?
View 7 Replies
View Related
Jul 10, 2013
I have a form, containing a button that when clicked, it runs a query and displays the results in Pivot Table view. The query is set to display only results for the manager name selected on the form. So, when someone opens this database, they first select their name from a drop down box and then click the button to run the query. The query displays average call rate for equipment that person is responsible for. The only problem I am having is that if someone goes back to the main form, selects a different name, and clicks the button again, the query will not refresh. The query won't even refresh when I click the Refresh All button in the Ribbon. In order for the query to update, I have to first click the button to refresh the pivot table and then click the button to refresh the query. Is there a way to do these two steps through visual basic, so that the user doesn't have to do those two extra steps?
Right now, I am using the Docmd.OpenQuery code on my button.
View 2 Replies
View Related
Dec 15, 2014
I am using Access 2003. I would like to be able to open a versatile form that can open any selected table in data sheet form. Currently I am using Command Button with the names of the tables as the trigger. Looking for VBA that would change the form's Record Source to a selected table and add all the fields of that table to the form on open. I figured that I can use the OpenArgs to get the form Record Source to be assigned, but how do I assign all the fields of the table to be dropped into the form?
View 10 Replies
View Related
Jul 24, 2013
I have a report that tracks scores for our employees. From the report, you can click a button to add a new score in a form or edit an existing score(frmscoretracker). On this form there are two subforms, in a tabbed control to track additional information about the score; what areas were marked down(Trends), and was it a failing score(AutoFail).
When this form opens I have it programmed to only show the subform if there is data in it. The goal being, if I am adding a new score and there is no existing trends or Autofails for this new record, neither subforms will show - I will add an after update even to show either trends or autofail depending on the score recorded. Also, if someone chooses to edit the score, whatever subform with data, will show as well.
When someone clicks to add a new score, opening this main form to a new record, both of the tabs show. However, if the form opens to an existing record, the appropriate tab shows. Here is the code
Code:
Private Sub Form_Open(Cancel As Integer)
'If the subform has a record, the tab is visible, if not, the tab is not visible
If Me.frmtrends.Form.Recordset.RecordCount > 0 Or IsNull(Me.Trends) Then
Me.Trends.Visible = True
Me.TabCtl33.Visible = True
Else
Me.Trends.Visible = False
End If
[code]...
Both tabs are set as not visible in the default settings. Is there something in this code that is triggering then to be visible when there is no record in the main form?
View 4 Replies
View Related
Aug 22, 2007
I just realized why I wanted to stop using Access long ago...anyway here's my problem.
I have two tables: table1 and table2 (I know,creative). Anyway, table1 is linked from another database, table2 is local to the open database. I use table2 as a temporary table to hold data from table1. table1 is then set as the datasource of one of my forms.
I have a button which is used to refresh the data. Basically, it deletes everything in the temp table (table2) and inserts data from the linked table (table1). When I do this, the rows in my form then all contain #Deleted, but it never refreshes with the new data after I have inserted it.
I've tried using the Refresh, Requery and even Repaint methods. Still no luck. Then, I clicked Remove Filter from the toolbar and the new data appeared, but I don't have any filters in place. So then I tried to do this programmatically by setting the subform (I'm using subforms ) Filter = "", its FilterOn to False and its OrderBy = "".
Any suggestions?
Cheers
View 3 Replies
View Related
Apr 15, 2014
I have an close button on a form that is supposed to Refresh the subform of a different form and then close the form with the close button.
frmOperations - no refresh / requery
subfrmPlants - Needs to be refreshed / requeried
frmPlants - Needs to be closed
Currently the button effectively closes frmPlants, but it's failing to refresh the data on my subform to display any changes that have been made on frmPlants. I've tried with refresh and requery, neither seem to work.
Code:
Private Sub lblClose_Click()
If CurrentProject.AllForms("frmOperations").IsLoaded Then
Forms!frmOperations!subfrmPlants.Form.Refresh
End If
DoCmd.Close acForm, "frmPlants", acSavePrompt
End Sub
View 2 Replies
View Related
Feb 26, 2015
I'm working with a form someone else created and am adding a delete button. I've managed to add the button and get some code working which will delete a record from a table. The problem I'm having is that after the delete operation occurs all fields in the form, and the corresponding items below the form, show #Deleted in all fields. How can I force a refresh using code?
View 11 Replies
View Related
Jan 23, 2014
I have a main form that the user will enter data. Once they hit a submit button, it saves the record and I was hoping it would also refresh the form in which is populated by a query. The form that is linked to a query will be displayed on a monitor 24/7. It will display pending orders. So I was hoping as new orders are placed, the query would display them without needing to be closed and then reopened.
Here is the method I'm using but it's not working.
Code:
DoCmd.Requery "frmPDMonitor"
View 1 Replies
View Related
May 24, 2005
I apologize if this has probably been asked countless times; however, in my search of this forum I could not find something that seemed to work for something so simple.
**************************************************
Scenerio:
I have 2 forms. The first form is my main form and the second form is my "popup" form. Both of these forms access the same table. In my main form I have it so people can not enter in a ID so it reduces accidental data entry. Therefore, I created a "popup" box that allows ID entry.
Everything works great except when I close out of the popup form, the newly entered data is not available unless I close the main form and reopen.
Million Dollar Question:
How do I refresh or requery (dunno the correct term usage here) the main form to reflect the addition I made in my popup form. I would like the refresh event to happen when I click the close button on my popup form.
**************************************************
Again, I know this is probably simple, but I cannot find it anywhere or most likely I am blind :cool:
Thank You
View 1 Replies
View Related
Mar 3, 2013
I have an access form that fills an access table (MS Access 2003). Also, I have a Word (2010) document/template with some template text and empty fields which should be filled with data from access. Is it possible to insert a button in access form which would open a word document and populate appropriate fields with data from that form?
View 4 Replies
View Related
Aug 17, 2014
How do you refresh all of the data on a form when the tables that are the source for dlookup fields on the form are changed by command buttons on the form?
View 1 Replies
View Related
Oct 14, 2013
I am making a booking system where a user enters
StartDate, EndDate (Form Header)
House , Room , UserID (Form Footer)
The Header and footer are not linked. The Footer simply displays all the existing bookings for said ouse/Room/Date combination. (Date being all dates between the StartDate and EndDate) BUT (surprise, surprise)users don't look at this to check if a booking already exists.
Also - It seems pointless to have the users enter the same data (House, Room, UserID) in 6 times (one for each day that they want to book the room.
So I am trying to automate the process.
Therefore, I append each 'new' record (that the users adds in this session) into a temporary table. (House / Room / UserID / StartDate)....note, no end date because I need a separate record for each day.
I have a query that is supposed to check the EXISTING bookings with the temp table.
My code (paraphrased here for simplicty) says
do while StartDate < EndDate
- if Qry_CheckForClash returns 0 records then '(uses a dlookup)
- append from TEMP to BOOKINGS.
- - else
- compile an alert message to the user (appending the Room No and Date each iteration)
- In Qry_CheckForClash, increase the StartDate by +1
- end if
loop
My problem is that after the last step (increase StartDate by +1) the call to Qry_CheckForClash still returns the initial StartDate. But when I check the TEMP table, the StartDate has changed.
So how do I REFRESH or REQUERY a query that is not associated to a form or report?
View 8 Replies
View Related
Feb 24, 2015
Here is the scenario:
Form 1 - Data entry for a new project
Form 2 - Data entry for a task associated with the project in the Form 1
Button on form 1 that opens Form 2.
What I am trying to do:
Use a combobox on Form Two to choose the Project entered into Form 1, so I can capture the Form1 PK as a FK on Form 2.
Here is the problem:
Refreshing the record on the button click so that the new option entered into Form 1 shows up in the combo box on Form 2.
Full disclosure:
I'm not much good at VBA so I have been trying to do this by customizing the button macro. I have tried Refresh, and Requery, but I can't seem to get it to update the list in the combo box.
2 questions:
1. How can I get this accomplished?
2. Is there a better way to get this data into the table than what I am trying to do?
View 3 Replies
View Related
Jan 28, 2014
Essentially I have a form_A with several tab's and then one list control box in each of those tabs. At present if you double click on any item within the control boxes your taken to another form_B with info about that item and when you close that from down again if refreshes form_A.
Is it possible to only refresh the specific list control box that is active instead of refreshing the whole form ?
View 4 Replies
View Related