Modules & VBA :: Pass Data Field Value To HTML Table
Feb 16, 2015
I have code that will create an email and prepare it for sending.It will create a table inside the email and fill it in with some text and underscore characters to be replaced by data from the database. So far the data has to be done manually. I would like to know if it is possible to use the values from some fields inside the select record in the current form. So, if Me.Status would be "New" it should pass this to the table in the email.So far I have the below code:
Code:
Private Sub Command280_Click() 'send email with table
Dim objItem As Object
Dim oMail As Outlook.MailItem
Set oMail = objItem
Dim oApp As Object
I have a database that will register the emails coming in and what time, also the time, date out and person.
I have a form with the fields to be filled in and a submit button. There are some fields that are automatically filled in and others need manually fill in.
below that part is a sheet (subform in the form of sheet) that should be filled in with the above data. Once it is there, it should empty the fields so they are ready to be filled in again. If I fill new data and press the submit button, it should go to the next available row.
I am using Access 2007 to update a page on an external website (amongst other things) from an Access form using VBA, but that page has recently changed. I have dealt with most of the issues around this, but there is still a problem that I cannot see how to resolve. Previously all the fields on the page were uniquely named, and so I was able to assign values from my form to them using
Code: .document.all.item(fieldname).value=...
But now there appear to be identically named fields on the webpage and I cannot see how to differentiate between them in my code. I have attached a text file with the two relevant sections, containing the HTML for the two relevant sections on that page only (the code for the whole page runs to 8000+ lines and I can add the lot if really necessary) and as you will see the names for things like runs (name="result[][runs]") and wickets ("result[][wickets]") are the same in both sections. So how do I tell one from the other in my code?
Currently I have the following:
With objIE .Visible = True .... '1st innings - new HTML field names but duplicated on the webpage .Document.all.Item("result[][runs]").value = nz(Me![runs_for#]) .Document.all.Item("result[][wickets]").value = nz(Me![wickets_for#])
[Code] .....
How can I differentiate between the HTML field names in the attached file as simply as possible in my code above?
I'm trying to output some logging to a form with a Rich text textbox
This is what the form is displaying: 14:16:32: check OK: 500<10000andS235='s460'> 14:16:32: check OK: 500<10000andS235='s355'> 14:16:32: check failed:too short 500<1000231231 > 14:16:32: Ready ...
There is some coloring in the text but I'm not display that here (copy/paste of the textbox)
This is the HTML behind it (? txtbox in imm.window): 14:16:32: <font color=black>check OK: 500<10000andS235='s460'</font><br />14:16:32: <font color=black>check OK: 500<10000andS235='s355'</font><br />14:16:32: <font color=red><strong>check failed:too short 500<1000231231 </strong></font><br />14:16:32: <font color=green><strong>Ready ... </strong></font><br />
The problem is in the red > that are added to each line. I have no clue where they are coming from, in fact: they are NOT in the HTML.When I display this piece of HTML in IE I don't get the red > behind each line.I have tried to use <p> of <div> instead of <br/> but that makes no difference
Can i make an html of login form, whose data is saved in access as back end. I am curious to know. but of course simultaneous saving is considered yes in here...
I'm working on a database that will be used when maintenance needs to be performed on our test equipment. So far, I have a form set up for the associates to track when a maintenance action has been performed. The top section of the form contains basic data about the part and there is a subform that lists the actions that need to be taken on the piece of equipment. In the subform, the associate can mark whether the action is complete or not.
If the action is marked incomplete, I wanted a separate form to appear for them to track why an action cannot be performed. If possible, I would like this separate form to automatically show the equipment ID and the action that was missed. However, I'm having difficulty getting the data to copy from the subform to the Exception form. Is this something that is possible to do?
I need to import a html file automatically BUT my file has many tables in it, when I am doing the importation it asks about which table I want to import, the thing is that I always want every tables. The number of tables is variable. VBA code so it can have a looping which says to import every table in my HTML file?
I need to remove html text from a make table in access 2007. My table name is "Bad Actors Comments Column" and the column where the html text resides is "FirstOfADD_TEXT. VBA code to remove the html text?
I am new to microsoft access and i am currently using microsoft access 2010...I have a students table in my access database and i have now append this table with data from a HTMLhow can i do that? using append query
I have a table in msaccess which i would like to use as a search term to search values in another table. What i wanted to do is search the table with attributes and save all found attributes to a new table with its primary id.
Search_Keyword_Table Id ---- Search_keyword 1 ----- Size - S 2 ----- Size - M 3 ----- Size - L 4 ----- Size - XL
First off I have to say I'm not an Access Guru by any means. I can make a very very basic database in access but beyond that I'm toast.
So I've just started working on a project that is in it's second year. The project was started last year by a student and she created, what seems to me, to be an adequate small database for the project. I've noticed however that when entering data, some of it has to be entered twice. This has been made easier through the use of the look up tab in the field definition (?). However, I worked with a student before who created a database where the primary key value of a "parent?" table was automatically forwarded to the corresponding field in the "child?" table.
So here's a hypothetical, let's say you have a restaurant, and one restaurant can have ummmm many tables, and then one table can have manyyyy chairs! There's a unique restaurant id created in the restaurant table, which is say needed with a table number to create a unique table id in the table table, which is in turn needed with a chair number to create a unique chair id in the chair table? So you basically have 3 tables where unique ids are being created. So then lets say you have a chair description table that has fields in it to contain all the ids made previously, as well as some of the information entered to create the unique fields (i.e. table number, chair number). My question is..if I've already entered this data in previous parent tables then why is it that the data doesn't carry forward to these fields? Is it because these fields are not primary key fields in this last table? If that's the case then is there a way to set this up? Right now there's a select statement used in the look up reference option that has something to the effect "select table.table_name from table;". So I know what it's doing and when I enter data I can select the table id I need. It just seems a bit redundant data entry wise to enter yet again values I entered the table before, or values that were generated for me in the table before.
Is there a way to have these fields automatically populate with the corresponding data that was entered to get to this table? Does it involve modifying the select statement to involve a where clause (terminology? clause?). Any ideas would be very much appreciated! Thanks.
When I copy data from Outlook or MS Word that contains bullets or other HTML formatted text, into MS Access text control, the HTML tags are displayed in the tables.
The memo field in the table is set to Rich Text and so is the text control on the form.
Below is an example of the data I'm copying from Outlook email:
ok , i have a primary table that have a field of "job", then i create another table that have a field of "job" too , then how can i do this task?
Whatever i type a data into the primary table("Job" field) i want it to duplicate the data into the another table("Job" field) . is it possible to do this? can anyone guild me to do ?
I am creating a log in form, it checks the user name which is unique. if the user has entered a password, it shows only one password text box, they enter the password, if it is correct they enter the database, otherwise they return to the text box.
But if they have not entered a password before the form opens with two text boxes, one for the password and one to confirm the password is typed correct, if the are different a message box shows telling them that they are different, now is where i having problems, when they have typed the two passwords and they are correct i want them to save this password in the same record "Password" as the selected "username" record, I can find the "username" record by doing a Dlookup, easy, but i am stuck how to then save the password from the text box where the selected username record is.
My table "staff" has fields of "IDStaff", "FirstName", "Surname", "Password", "Username".
If I have an XML file, I can load it into an XML document and parse it.
For an HTML file, I have been unable to find similar parsing methods - that is, using DOM and not involving a browser (other than simply treating the file as text). I'd prefer to avoid the browser control because it is different for a number of different Access versions, so the only option remaining that I see is to run Internet Explorer with visibility off.
Can one parse HTML using the DOM without a browser?
I'm try to centre a logo image in the middle of email but I having issue doing it doesn't seem to matter what I try I can't seem to get it to do what I want . The code below works but doesn't centre the image
Code: Dim txtLogoURL As String 'this is for your logo txtLogoURL = "C:UsersDellPicturesoie_transparent.png" strHTML = strHTML & "<p>" strHTML = strHTML & "<a href=""http://www.testing.com/""><img border=""0"" src=" _ & txtLogoURL & "' align='Centre' width =200" & " alt=""testing"" /></a>"
Public Function DisplayImage(ctlBrowserControl As Control, _ strImagePath As Variant) On Error GoTo Err_DisplayImage Dim strDatabasePath As String Dim intSlashLocation As Integer
[code]...
This works perfectly to display the image I'd like through WebBrowser control I put onto the form....HOWEVER --and here's my question--the image size is not bound to the size bounds of the control size itself.So if my control is 2 inches by 2 inches and the image is 16 inches by 16 inches, then the image doesn't fully show within the control.
I'd like to get the control to show the whole image (sized down as appropiate, or sized up as appropriate) such that the whole image is contained within the control.I know how to limit the display of any image in HTML.
I am using the following vba code to create and send an html format email message. The key information in the email is a hyperlink to a network drive folder location using [Directory] as a hyperlink table value to get the address that is stored like this: K:PipelinesP9 - TEP ProductsMOP AID-1500Final Approved
The email hyperlink that is produced looks like this:
#K:PipelinesP9_-_TEP_ProductsMOP_AID- Dim appOutLook As Outlook.Application Dim MailOutLook As Outlook.MailItem Dim MOPVDB As String MOPVDB = "H:PGADSBYMOP VALIDATIONTRACKINGMOPVDBMOP Validation DatabaseFE.accdb" Set appOutLook = CreateObject("Outlook.Application")
I'm using the below to merge an access form into a word template (it's a starter for 10).
That works fine. What I need to do is save the word template as HTML so I can then upload it to my website.
Dim wordApp1 As Word.Application Dim docPath1 As String Dim fileName1 As String Dim PageName As String PageName = Forms!Frm_Page_Create![Page] docPath1 = Application.CurrentProject.Path & "Merges"
Could anyone explain me the best way to fill external HTML pages automatically with data from an Access dbase? I have spotted several commercial tools that use macro recording. Surely there must be another way using visual basic for example?
I am trying to build a database to store product information and also the product page in HTML. I was able to do this in MS Access, however the export process would alter the code....(the field is in long text, and in Rich Text format)
For example, this is the code I store in the table:
I need, in some way or another, to be able to import an HTML code from an HTML file into Access. It would be ideal if the end result is a table with one memo field named "HTML".
I know is seems strange, but I need the code itself. I've managed to do a bit of duct-tape work, and import from HTML, but this results in only the text of the HTML code (Meaning the text of the web page, not the tags).
I know I'm crazy for wanting this, but is there anyone out there who can give direction/guidance?
I'm trying to create a lotus notes email through vba that contains data from one of my access tables. Since I'd like the data to be displayed in a tabular fashion, I'm trying to format the body of the email in html.
I am simply trying to find text on a Web Browser Control htm page.
Using MS Access 2003, I have a form that includes the activeX Web Browser Control. On load of the form I initialize the web like below:
Code: Dim strURL As String strURL = "http://www.justice.gov/eoir/profcond/chart.htm" Me.WebBrowser0.Navigate strURL Me.WebBrowser0.Silent = True
The page loads fine.
Now, also, on my form is an unbound text box I call: [txtFind] and a command button I call [cmdFind]. I want [cmdFind] to find the first occurrence of the value in [txtFind]. My code below doesn't do anything when I click the [cmdFind] button.
Code: Public oRange As Object Public myfindFirst As Boolean Public intTextLength As Long Private Sub cmdFind_Click() Dim sSearch As String Dim strText As String
Good morning! I'm using Access to redesign our company's electronic phonebook. Our intranet uses SharePoint technology and our IT people have cranked our security settings up pretty high, so I can't use data access pages or ASP. Therefore, I'm going to use static HTML, producing a single page which the CEO's secretary will upload once a month, allowing our 800+ employees to view the entire phonebook at once. CTRL-F is their friend.
I've managed to design a data access page that looks very much like we want it to, but I don't know how to export it to static HTML. Can such a thing be done, or am I just being wacky? If so, is there a way to automate it so the secretary can just push a button to generate the page?
I have a table field defined as Plain Text. On a form I have a memo field set up also defined as Plain Text. When I enter data into the memo field on the form and save it, I see HTML characters in the field on the table.
I attached some screen shots of the table definition, form field properties and a look at the data saved to the table with the HTML characters.
