I'm trying to the following sub to automate the creation of RecordSets but I'm confuse how to get it done properly.
Public Sub OpenRecordSet(SQLString As String, NameRecordset As Object)
Set NameRecordset = New ADODB.Recordset
NameRecordset.Open SQLString, adOpenStatic, adLockOptimistic
I want to pass the name of the recordset as a parameter but I don't know how to set it.
I have the following Visual Basic code which I am using to dynamically pass the parameters "SAFP" and date 10/31/2014 to the query:
Option Compare Database
'------------------------------------------------------------ ' Run_Risk_Assessment_Report ' '------------------------------------------------------------ 'Original macro code Function Run_Risk_Assessment_Report() On Error GoTo Run_Risk_Assessment_Report_Err Dim dbs As DAO.Database Dim test1 As DAO.QueryDef
[Code] ....
When I run the query, i get the error "Item not Found in this collection"
I have a function that when called transfers a query recordset to an excel spreadsheet then emails it. At the end of the function I use code to write the date sent to a table. Each time the function is called I only need records in the query that have been modified since the last time the function was called. I have a field in the query 'LastModified' with a criteria '>[Enter Date]'. I then look up the date in the table and enter it manually. I know how to look up the last date sent in table using code but getting the >#SomeDate# in the query with VBA.
Hello! First time post, and I'm desperate for some help.
I am trying to use a loop through a recordset, pass the value of the current record into a WHERE clause, run an append query based on the value of that record THEN loop through the recordset, pick the next value, pass it to the WHERE clause, run the append, etc. I finally figured out how to set a variable as a parameter for my WHERE clause and how to loop through a recordset.
My problem is this, I cannot get the variable (myvar) to update with the next value from the next record in the recordset. My code loops through all records just fine, but it only appends the query result based on the value of the first record. In short, I get 134 appended records all with the same value because myvar never changes.
My code looks like this:
Public Sub OpeningARecordset() Dim db As Database Dim rec As Recordset Dim myvar As Double Set db = CurrentDb() Set rec = db.OpenRecordset("Select SRS_SKU FROM tblUniqueSKUListing") myvar = rec("SRS_SKU") rec.OpenRecordset Do Until rec.EOF rec.MoveFirst DoCmd.RunSQL ("INSERT INTO [Loc Group Names] ( SRS_LOCGROUP, [Loc Group] )" _ & " SELECT tblUniqueSKUListing.SRS_SKU, tblUniqueSKUListing.SM_DESC" _ & " FROM tblUniqueSKUListing WHERE (((SRS_SKU)=" & myvar & "));") rec.MoveNext Loop rec.Close End Sub
Can anyone shed some light on how I get myvar to update with the value of the next record once the append is done?
Using Access 2003. Really need some help. Have the below code which executes a SELECT query and passes the results as an excel spreadsheet attached to an email. Problem is that the query store_report has some parameters that need to be passed to it. Is there a way that with my current code I can pass those parameters. If not is there some other commands or code I can use to accomplish this?
DoCmd.SendObject acSendQuery, "store_report", acFormatXLS, _ "john@john.com", "c.w.k@gmail.com", , _ "Store Reports", "Here are your reports.", True
I currently have a student membership database with a main Members form. When it opens it prompts me for a parameter which determines if only active, inactive or all members will be displayed. Once the form opens I use a combo box to search through all of the records. Currently this combo box lists all of the members names regardless of the parameter. To address this I set the same parameter query for the combo box. This works fine but it means that I have to enter the same parameter twice. What I would like to do is to have the 1st parameter, when the form opens, pass to the combo box. Any pointers would be greatly appreciated.
Also, if anyone knows of a more elegant way to accomplish this other than using a parameter query please feel free to pass this along.
I have a form with a combo box that when I select a value I want the hidden value (UserID) passed to a query that would open up a form that is set up like a data sheet. When I try to set up a form that would display the records related to the UserID I end up getting all records and the UserID column replaced with the passed value when I set the control source to = Forms!frmEmployeeInstances!cboShiftEmployees.Colum n(0) I don’t know if I can pass the value to a query (if the query can even acknowledge the passed value), so any help would be greatly appreciated. I have the OnClick set to open a form called frmShowInstances via a Macro but I could never get the Where Condition to work either.
I have list (server names) in excel file (200 rows), I would need to query the Model of these from in MS access, How do I pass these list in excel to the query.. I can't be running the query 200 times nor I could type them one by one.
Can someone please tell me if it is possible to pass in a parameter for the sorting field to a stored procedure in MS Access. When I tried to execute a query similar to below, neither did the query give me an error nor did it execute correctly.
PARAMETERS ORDERBY_FIELD as Text; Select * from Employees Order By ORDERBY_FIELD;
It will be great if someone could help me with this.
I know this is probably a basic question- but Im not finding a clear answer here.
Basically- I have a value that I want to select from a drop down box on a form (not created yet). That value will get inserted into my query for a calculation I am doing. The form will pop up the results of the query in a table/dataset.
How do I designate the variable in the query that is being inserted from the form? I am using Access 2002- is there a way to visually perform this task (ie- drag/drop type thing)? Thanks guys!
trying to pass a textbox value as parameter in a sql query.I have a multiline textbox and I use it to find several values in the database, so in this textbox all the values are pasted each per line and I have a small code to convert it to single line comma separated values.This is an example:The user enter the data:
[Text0] A1C556CC3C-TNNN C010070H13
The code convert this data to a single comma separated string and runs the query: ex: "A1C556CC3C-TNNN","C010070H13"
Code: test = """" & Replace([Forms]![Search]![Text0], Chr(13) & Chr(10), """,""") & """" [Forms]![Search]![Text0].Value = test DoCmd.OpenQuery "FindPartNo", acViewNormal, acReadOnly
In the SQL code I use the IN operator to find the exact value for each record:
[code]...
I'm passing the value incorrect into the sql code?
Hi - I am looking for some help understanding the instructions in the msdn article on how to pass a parameter from a DAP. Please refer to the article: http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnacc2k2/html/odc_PassParam.asp
I was able to follow the instructions until Page 2 of this article...where it says: "Add the functions to write, read and delete cookies in a separate global script block."
I do not understand how to create a global Script block. Do I just copy and paste this code right below the 1st code on Page 2? Or, is there a way to create a global script block separately and add this code there?
I am unable to find that much Online resources on DAP as other Access topics. I thought posting my question here would be the last resort for assistance! :confused:
I have an append query that contains a parameter [PTIdent] under the field named PTID. I would like to be able to set the parameter through VBA from a control on a form eg Form!PTID
I use the following code as normal Private Sub Command19_Click() On Error GoTo Err_Command19_Click
Is there a way within this code to do this? I realise I could set the form criteria within the query itself. However I wanted to be able to use this query from multiple forms.
I have a query set up which needs to have different criteria at run time depending on values selected by the user. If no option is specified, I need to pick up all records with 'Nulls' in them else, if date is specified by user, I need to pick up all records with date > than specified date. The query is able to pick up the date value from an unbound text box in the form. I used the same field in the form and populated "Is Null" in the field and it does not work. How do I pass this as a paramater to the query from the form? Is there a way around without setting up 2 sets of queries and reports?
I have form with a button on it that launches a parameter-based Select query (which served as the source for a report). I didn't have any validation measure in place, so if the User supplied a bogus value, a blank report was generated. While not technically an error, it would seem more polished to generate a warning message if the User supplies a bad query value and prompt them to re-enter.
Having read other posts along these lines, I've added an unbound text box to the form which the User fills in first before clicking the button. When the button is clicked, it executes code that uses the DCount function to make sure the text box value is in the source table, and if it is then it runs the parameter-based Select query. My question is how to pass the value in the text box to the query as a parameter. Below is a sanitized version of the code that I've generated so far.
Private Sub SingleItemRptB_Click() If DCount("[FieldName]", "[Table]", "[FieldName]=[TextBoxValue]") = 0 Then MsgBox "Item not in database. Please check value and re-enter." Else DoCmd.OpenQuery "SingleItemQ", acViewNormal, acReadOnly End If End Sub
I have a form which users can toggle whether they want to only see entries that has data in a certain field. Previously I have set up a separate query with a hardcoded 'Is Not Null' in the criteria, and set the form to call the different queries based on the status of a toggle button. This time there is 22 queries that need to be modified so I'm hoping there's a better way.
I have a hidden textbox on my form that has value "Is Not Null" or Null based on the position of the toggle button.
In my query for the field criteria I have [Forms]![MainForm].[txtCriteria] where txtCriteria is the textbox previously mentioned.
I'm having a very simple issue (I think) trying to pass a textbox value as parameter in a sql query.I have a multiline textbox and I use it to find several values in the database, so in this textbox all the values are pasted each per line and I have a small code to convert it to single line comma separated values.This is an example:The user enter the data:
[Text0] A1C556CC3C-TNNN C010070H13
The code convert this data to a single comma separated string and runs the query: ex: "A1C556CC3C-TNNN","C010070H13"
Code: test = """" & Replace([Forms]![Search]![Text0], Chr(13) & Chr(10), """,""") & """" [Forms]![Search]![Text0].Value = test DoCmd.OpenQuery "FindPartNo", acViewNormal, acReadOnly
In the SQL code I use the IN operator to find the exact value for each record:
FindPartNo sql query:
Code: SELECT Classifications.BU, Classifications.WisperPlantID, Classifications.PartNumber, Classifications.PartDesc, Classifications.US_CL_Code, Classifications.MX_CL_Code, Classifications.TARIC_CL_Code, Classifications.COEProject, Classifications.Supplier, Classifications.BrokerRequest, Classifications.CreatedBy FROM Classifications WHERE Classifications.PartNumber In ([Forms]![Search]![Text0]);
The problem here is, the query doesn't return results but if I modifiy the query and I put:
Code: WHERE Classifications.PartNumber In ("A1C556CC3C-TNNN","C010070H13");
... the query returns the correct results.I'm passing the value incorrect into the sql code?
SUMMARY: In Access 2007, can I pass a Column Name as a parameter from a Combo Box in a form?
DETAILS: I would like to use a String value from a Combo Box as a parameter in a Inner Join query: ... WHERE (((AAA.HSC) Like Forms!My_Form!My_TextBox) AND((CCC.Forms!My_Form!My_ComboBox)="X"))
Where "CCC is a Table from my Join Query
I'm able to run the code above without generating any errors. However, instead of the query accepting the value from the Combo Box, it opens a pop up asking for the value of "CCC.Forms!My_Form!My_ComboBox", not once, but twice! After it finally runs, the result set is empty when it should not be. I also find it strange that it is asking for the combo box value with the Table name appended to the front.
I have a linked table tblHome which is stored in a Sql Server DB and I want to create a form with 3 fields in it i.e. fieldA, fieldB, and FieldC in it and a button.
I want to add values to fields fieldA and fieldB and fieldC and when I click the button I want the value in fieldA to update any records in the linked table tblHome which contains the values in fields fieldB and FieldC.
Special situation: The SQL Server Linked Server across the country is linked to a Read Only Oracle DB. This data pull works perfectly and populates the Subform.
The problem is that Oracle can take 3 to 6 seconds to retrieve the single record depending on the network traffic through a small pipe.
The code below shows the RecordSource for the SubForm. clicking on a list box supplies the value. Then 3 to 6 seconds later, the subform populates.
The actual Recordset for this Recordsource is needed to conduct Validation on each field. Normally this would be on SQL Server, I might just create a Recordset Oject and run this SQL statement again in 1 milisecond. In this case, it will probably take an additional 3 to 6 seconds. Avoiding another lengthy round-trip to Oracle would be prefered.
Goal: How does one grab, clone, or other wise reference the existing recordset for the SubForm?
Note: Immediate Window - One single field can be returned quickly
There are 48 fields that need validation - is there a way to reference the entire recordset?
Immediate Window during Break Mode: ? me.fsubsrNavSHLBHL("NavSH_QQ") NESE ' this is the correct value for the current recordsource
Set a breakpoint right after the line: fsubsrNavSHLBHL.Form.RecordSource = "Select * from vsrNavigatorSHLBHL where Well_ID =" & txtNavWellID.Value
Immediate Window: ? me.fsubsrNavSHLBHL.Form.RecordSource Select * from vsrNavigatorSHLBHL where Well_ID =91229
i want to open a recordset, in its 'where' clause i want to pass the value which i entered in Form textbox? is this possible ?
COde: rs.open "select * from table1 where id=form.textbox",con
i have written general code above. when i run my application ..it gives error "Control which is focus can only be reference" how can i pass my value to select query ?
I am trying to run this recordset with parameter query and export to excel. Problem I am getting is it is sending the ID of employee name and exporting row wise instead of column wise.
Code: Dim dbMyDatabase As DAO.Database Dim rsMyRecords1 As DAO.Recordset Dim qdMyParameters1 As DAO.QueryDef Dim iIndex As Integer Dim iFound As Integer Dim oExcel As New Excel.Application
I want to write a email where there are 2 or 3 different ordernumbers for same email, i want to include the email in the mail part as single column table. how to do it? also can i use result of one recordset for other recordset?
I am trying to pass a date range parameter & an additional parameter (Type of Audit) to 6 subreports based off individual crosstab queries and housed on one Unbound Report ("rptFinal").I have an Unbound Form "frmDate" passing a date range and Type of Audit using [Start Date] and [End Date] to rptFinal with a button that simply opens the rptFinal as follows:
In each Crosstab query, I have set the parameter criteria (in both the Parameter section & the query itself) to:
[Forms]![FrmDate]![Start Date] And [Forms]![FrmDate]![End Date] and also, [Forms]![FrmDate]![Enter Type of Audit]
On each subreports On Load Event, I have added:
Private Sub Report_Load() Me.Filter = "[DteAuditDate] BETWEEN #" & Forms!frmDate![Start Date] & "# AND #" & Forms!frmDate![End Date] & "#" Me.Filter = "[Type of Audit] = #" & Forms!frmDate![Enter Type of Audit] & "#" End Sub
and I've set the Filter On Load property to: Yes..I can open frmDate, fill in the date and Type of Audit, launch the report and it runs with no error, I have 6 blank subreports in report Preview. The headers are showing up but none of the data.