Modules & VBA :: Print Current Record From Recordset?
Aug 7, 2015
Is there a way to print the current record from a dao.recordset?
This is an exercise to compare data content.
I have a table with 30 fields and thousands of rows (rs1).
I'm comparing it with a copy of the same table (rs2) that has the same number of fields and the same rows and almost the same content.
I can loop through the recordsets and get the cursor to stop on a field whose values don't match, lets say on row #x
and the programmed message will say something like:
"ROW: 699 Field: [RequestStatus] rs1.VALUE: Closed, DOES NOT MATCH rs2.Value: VOID, in the comparison recordset"Then I'd like to print the entire Row, Row #699.
I thought I could use rs1.getrows but I'm not sure how to make that work.
While the validation runs a boolean keeps track of validated input and errored input.
After validation the validated input is dumped in the table.
Now what I want is de saving the errored record from "rsSQLIn" to be copied to a new .csv file.
The problem I have is that I cant seem to get the current record from the recordset "rsSQLIn". How do I reference this? I need the complete set of 24 fields being the same within "rsSQLIn"
I have VBA code for a Print Preview button on the main form that previews the current record in a separate Report using this code:
Code: Private Sub cmdPrintRecord_Click() Dim strWhere As String
If Me.Dirty Then 'Save any edits. Me.Dirty = False End If
[code]....
I use this Print Preview code on a Button in the Form Header. The Main form lists head of household information. I also have a tabbed control with three tabs that have SubForms for Address, Children and Contact details. The problem I have is that if any of the subforms are left blank I get a Run-Time Error '3021': No Current Record. If I Debug (press the button), it takes me straight to this line:
highlighted in Yellow.Anyone on my database must have an address, should have contact details and could have children. If any one of these is blank then the print preview will not work.I would like to know how to stop this error happening for blank records in my subforms.
Is there anyway i can print the current record using a button or something ,which i am viewing using Data Access Pages , i have searched a lot of forums but have got nowhere , now i just wanna know how the hell can i use it to print a record or print any report for that matter using a DAP!!! can anyone give me a suggestion or just point me to some reference for using these DAP...
I have a report that is tied to a table. On my table form I have a button that prints the report. Is there a way to only print the report for the current record showing on my form?
Private Sub Command30_Click() DoCmd.RunCommand acCmdSaveRecord Dim strDocName As String Dim strWhere As String strDocName = "Civil Process" strWhere = "[FormID]=" & Me!FormID DoCmd.OpenReport strDocName, acPreview, , strWhere DoCmd.RunCommand acCmdPrint End Sub
I can get this code to print only one record but then the button will always print this record. It will not change and print the current record.
FormID is an autonumber to give each record it own id.
I need to Print a single record from a form but using a report layout.
I have created the form and created a report. A button on the Form kciks off the print but I get all records rather than just the one shown on the Form. Whats a really simple way of just selecting the Current record.
Where do I put an instruction saying print only this record:confused:
hi i have 3 queries brought together in 1 form. i do not want a report to be printed out just the current record in form view. this is because i have a number of images per record. if i print out the current record and it only has 1 photo in a sub-form attached to the main form record, then the main form will print on 1 page which is what i want [screenshot 1]. But if there are 2 or more photos attached to the main record then the print command button prints out 2 pages for 2 photos, 3 pages for 3 photos and so on [screenshot 2]. any ideas as to how to limit the print command button to print out only 1 page per record regardless of how many photos their are attached to each record?? thanks
I have a DB in Access 2007 which I'm having trouble with. I have a form, "Sub_Det_Frm", on which I would like to place a button to print the current record, (Primary Key is an autonumber "Employee Number") to a report "Sub_DetForm_Rpt".
I've used the instructions from, oops I can't show you the link! It's h(double t)p(colon)//allenbrowne(dot)com/casu-15(dot)html but I'm getting this error:
The expression On Click you entered as the property setting produced the following error: A problem occurred while Employee Details was communicating with the OLE server or ActiveX Control.
This error occurs when an event has failed to run because Microsoft Office Access cannot evaluate the location of the logic for the event. For example, if the OnOpen property of a form is set to =[Field], this error occurs because Access expects a macro or event name to run when the event is fired.
I want to put a print button on my data entry form that prints the current record in a report that is laid out all nice and pretty. I found this code that works, but it goes straight to the printer - it does not bring up the printer dialog so you can select a printer.
Code: Private Sub RecordPrint_Click() Dim strWhere As String If Me.Dirty Then Me.Dirty = False End If
Code: Function Write_rstADO_to_CurrdB_Table() 'Assumes you have already setup a DSN to your Server 'Assumes YOURDESTINATIONTABLE is the same structure as your SERVER.TABLE Dim cnnADO As ADODB.Connection Dim wkspDAO As DAO.Workspace
But what I need is that before printing, open the preview to set the margins and page size ... or at least to pre-configure so that when you press the button, and comes preformatted.
I have been an MS Excel man all along my career and I am a novice in MS Access.I have created a table, [Initial Customer Approval] which records data from a Form, [Initial Customer Approval]. Once the data is entered in the Form, I need to do some calculations based on the data entered in some of the fields in the form.I created 6 different queries for the six possible values in those fields. now for each of those queries I created respective reports.I placed a Print command button in the Form.
1. When I press the Print button it should open the report for the current record in the Form. (Currently It Opens all the reports simulatneously, with only one relevant report containing the current record; other opened reports being blank.)
2. If user presses the Print button before pressing Save button then system should prompt user.
Here is the code (Please note [reference number] is the unique ID generated for each record entered in the tabe through form):
Private bSaveClicked As Boolean Private Sub Form_BeforeUpdate(Cancel As Integer) If Not bSaveClicked Then MsgBox "You are trying to navigate away from the active record. Please either save your changes, or press ESC to cancel your changes.", vbOKOnly + vbInformation Cancel = True
One of the common denominators between them is the URN which is auto-populated as it is an auto number field. My issue is that when I want to add a new record to the payments table using the forms (I can get to the payments form via the register form), I want to be able to identify the record that I am currently viewing within the register and auto populate the URN field with the same number. This is what I have done so far,
Option Compare Database Option Explicit Private Sub AttachPaymentDetails() Call PerformInsert("tblFinancialBudget", "frmFinancialBudget") End Sub
I'm trying to make a form that shows what the last record was next to the empty space where you enter a new record.
This is so the user knows that what they are entering is roughly in line with what has come before.
So for example if I was recording temperature every May, I would like a form that has a field called temperature and next to that field I would like to see last year's temperature.
I am attempting to use 2 fields from a query to supply the Top and Left Properties of a Collection of Rectangle Controls on my form. The purpose of this is to display the locations on a map of "Spots" in a haunted house. The query that I am using shows the spots that have been pre-tagged with the location of where they belong on the map (currently the query has only 24 tagged spots). On the actual form I have rectangle controls (control type acRectangle) with their visible property set to False by default, named box1 through box25 (there will be more eventually, as I am just working with this test group).
I started with the following code, yet it stops after (correctly) placing the first spot on the map (please see the attached jpg):
Code: Private Sub Form_Open(Cancel As Integer) Dim ctl As Control Dim db As DAO.Database Dim rst As DAO.Recordset
[Code]....
I'm sure I need to have 'Loop' in there somewhere, but I am not sure exactly where to place it, or if another line is also needed.
I have a problem with trying to execute a command for each record in a recordset. What I'm trying to build is a file distribution system. I have a form with the path where the source file is and a subform with a couple of records where the destination path is defined. I use the code you will find below, but it will only copy the file to the destination from the first record.So the code will do the filecopy command for every destination.
Code: Dim Sourcepath, Destinationpath Sourcepath = Forms![Item distribution]![Item source path] Destinationpath = Me.Destination_path Dim rs As DAO.Recordset Set rs = Me.Form.Recordset
Is is possible to generate a workbook for each record in a recordset, and title it using the unique identifier for that record?
I created the following code, but it does not seem to work. First of all it doesnt like the string and secondly it does not like the declaration of wb as Excel.Application
Code: Private Sub generate_wkbk() Dim rsID As DAO.Recordset Set rsID = CurrentDb.OpenRecordset("Select * FROM tblMeeeting;", dbOpenDynaset) With rsID rsID.MoveFirst
