i have got the bellow code that filters a listbox which is based on a query, from a textbox. The code works fine and it Filters, but if i put in too many characters that do not exsit in the data( so it cant display any results) i get an error saying Run time error 2105 - You cant go to the Specified record? how i can catch this error so it does nothing apart from display a blank listbox with no error?
code:
Private Sub txtSearch_Change()
Me.lstShowSupplier.Requery
DoCmd.Requery
Me.txtSearch.SetFocus
If Not IsNull(Len(Me.txtSearch)) Then
Me.txtSearch.SelStart = Len(Me.txtSearch)
End If
End Sub
I have a list box pulling information from a table. It include fields for last name, first name, primary number, secondary number, and id; of course with different names. I display first and last name, but the rest are hidden. What would be ideal is if I could begin typing someones first or last name in the text box and it would just start either narrowing the list, like in itunes, or would start skipping down the list and would be highlighted. For example. If I was searching the number for walmart, i could go to the text box and type "wal" and it might highlight "wallace, james"; and if I added and "m" to that, it would skip down to "walmart".
I would settle for autofill and click a search command button when I'm done, and it takes me to that entry in the list box. I copied some code off the internet. Don't know if it'll work, but here is what I got.
Private Sub txtSearch_AfterUpdate() Dim srchstrng As String srchstrng = Me.txtSearch.Value SQL = " SELECT Phone.last_name, Phone.first_name FROM Phone_" WHERE (((Phone.last_name) Like '*" & srchstrng & "*'));" Form.RecordSource = SQL DoCmd.RunCommand acCmdRefreshPage End Sub
I was able to create a very user-friendly pop-up search form : {URL] .....
I would like to take it a step further... Now, I would like to grab the selected record ID from within one of the list box columns and use it in my SQL statement (to copy the record into a new one). Is there any way to reference a highlighted record value within a list box recordset directly and/or any workarounds?
I know one would be to grab the ID and insert it into the text box, just don't know what the coding references would be for this.
Ok I'm building a Text Search box that "Live Filters" the results in a ListBox control on the same form.
After typing in a value (Say, for Customer First Name like "Steven") I want the code to do the following:
1. If there is no value in the listbox that matches when the user presses the enter key....open the New Customer form - THIS WORKS
2. If there is a single value in the list, then open this record in the customer form when the user presses the Enter key Receiving a Syntax Missing Operator error on this line:
However, I use this exact code on a button elsewhere in my project (NOT within an IF Function) and it works perfectly fine!
Code: Private Sub txtSearch_KeyDown(KeyCode As Integer, Shift As Integer) If KeyCode = vbKeyReturn Then If Me.ListCustomers.ListCount = 0 Then CmdNewCustomer_Click
I'm fairly new to Access / VBA and have been trying relentlessly to get a text box / search button on my Access form to pull up a specific record. Although the null command produces the correct error msgBox, it does not show any record if I enter a correct primary key term.
Code: Private Sub SearchButton1_Click() If IsNull(SearchField1) = False Then Me.Recordset.FindFirst "[UniqueAEVRef]='" & SearchField1 & "'" Me!SearchField1 = Null If Me.Recordset.NoMatch Then MsgBox "No record found", vbOKOnly + vbInformation, Me!SearchField1 = Null End If End If End Sub
I have a table which lists all documents that refer to a certain entity. the table contains the file names and paths. I would like the user to be able to search for text inside these documents.Can I use Windows Search for that by using code? Is there any other way?
I have two unbound text boxes and a search button adjacent each that allows me to search for a user via two methods:
1) Payroll ID 2) Surname
They have the following code:
txtPayrollIDSearch
Code: Private Sub txtPayrollIDSearch_AfterUpdate() Dim sWHERE As String sWHERE = "[PayrollID] = " & Me.txtPayrollIDSearch sWHERE = "[PayrollID] = '" & Me.txtPayrollIDSearch & "'"
[code]...
Then minor differences between the above and the Surname search.I have two questions:
1) How do I make the search more friendly by allowing it to find partial matches, i.e., a user has a surname of 'Smith' but I want to search for 'Smi'?
2) How can I display further error messages if there aren't any matches?
I am 2 years into my database. I am trying to find and open a folder based on a text box. The problem is folder could be in many sub folders which is hold on our J: drive.
To further complicate, the folder i am searching may not be exactly as the text box states.
EG. Text box could say 123456 however the folder could be called M123456 etc.
How do i locate a folder or subfolder and open it based on part of a text box...
I have the code below and am trying to have a form allow Text Box to become visible based on selected items from a List box. Why I am getting the error listed?
Compile Error: Invalid Qualifier
Code: Private Sub specific_opt_Click() Dim users As Control Dim ctrler As String Dim xx As Long If Me.specific_opt = True Then GoTo 169
I have an access project that I am working on and need to be able to select multiple items from a listbox and have the exact selections appear in a textbox on the same form. I have looked around and have not been able to find any code that works.
how to read a specific line in a CSV file (using VBA), to see if the phrase "There are no records available." is present.
If it is present, then I'm going to do a debug.print stating that there are no records to load - and then the script will move on to the next file. If the phrase isn't present, then I'm going to upload the file to Access, parse the information, and then upload it to a CRM. (I already have the latter portion of the code up and running....I just need to account for the first part, where I can determine if the file has data or not).
The structure of the file never changes. The first row is composed of eight column headers (Post Date, Card Number, Card Type, Auth Date, Batch Date, Reference Number, Reason, Amount) and (if) the phrase "There are no records available." is present, it will show up on the second row, in the first column (under Post Date).
I am creating a a text box where the user enters a text then clicks an option from the option that is used as the criteria for the search e.g. Last Name, Phone , address then a command button wil run a query.
I have a form that has a subform on it. The main form shows a category of furniture and has custom navigation buttons and a search text box for asset numbers and command button that runs the search. The subform shows the asset numbers associated with that furniture category, sometimes there is only one asset number, in other cases there could be 60. There is a scroll bar to scroll through the asset numbers when there are too many to see in the initial window.
The buttons all work as they should except when I search for an asset number that is part of a category that has too many asset numbers to show in the main window. When this happens the "previous" and "next" navigation buttons do not take you to the previous or next record. All of the other buttons on the form work though - you can go to the first, or the last record, and you can search for a new asset.This is the code for the search:
Code:
Private Sub cmdAssetSearch_Click() Dim rs As Object If IsNull(Me.TextAsset) Or Me.TextAsset = "" Then MsgBox "Please type in an asset number to search for.", vbOKOnly Me.TextAsset.SetFocus
[code]....
I've also attached a picture of what I mean when I say there are more asset numbers than what the window shows.
I have a form with two text boxes and a button. I want to be able to type a value into the first Text box click the button and the second text box to be filled with the value which is stored in the Table.
The first Textbox is called barTxt, The second Textbox is called CustTxt The button is called SearchBtn and the Table is called BookInTable. I have been trying to use the code.
Code:
Private Sub SearchBtn_Click() DoCmd.FindRecord Me.BarTxt.Value, , True, , True CustTxt.Value = "SELECT BookInTable.Customer FROM BookInTable " & _ " WHERE Customer = """ & Nz(Me.BarTxt) & """" & _ " ORDER BY Customer" End Sub
This however instead of displaying the Value for customer which is stored in the BookInTable. Displays The code SELECT BookInTable.Customer FROMBookInTable " & _ " WHERE Customer = """ & Nz(Me.BarTxt) & """" & _ " ORDER BY Customer"
I have a table called Bear Sighting, A form called Search by observer.. A list box, containing all the observer names. I would like to be able to search through the database table 'bear sightings' and display only the sightings by the observer that I have clicked on... I would like to display them 2 different way at the same time... once in a list box and then again see them at the bottom of my form, displayed as records that you would see in the design view of my table... any can help, that would be great... I am not too familiar with the program so I will need specific details if you could thanks...
I created a list box from the patient info with the following
Last Name First Name Social Security Date of birth Account Number
I created a text box above the list box to search records but dont know how to link the two
Also created Option buttons
Last Name First Name Social Security Date of Birth Account #
So if i need to search by last name i click on the last name option box and type the last in the search text above the list box and so forth any ideas.
I have been searching the forum for this scenario but could not find similar case, which is as follows: I have a Search Form with many Text and Combo boxes, linked to search criteria in a query. There is also a sub-form showing the search results. I am trying to replace one of the combo boxes on the form, with a List Box, so I can make multiple selections. For example instead of showing only "buy" transactions via the combo, I want to see both "buy" and "sell" transactions, which I believe could be done via a List Box.
For the combo box I have the following: In the Field section I have: [TransactionType]=[Forms]![frmSearchTransHist]![cboTransType] Or [Forms]![frmSearchTransHist]![cboTransType] Is Null
For Criteria I have - "True"
So, my question is what should I put on the query in order to make it work with a list box.
I also want to give credit here to Jon K who has an example of database with combos and texts - very helpful example! http://www.access-programmers.co.uk/forums/showthread.php?t=103312
When you use a combobox to search values in the form - and someone searches for a value that isn't there - the form just defaults to the first entry. Is there a way of putting a message box that says "This is a new patient" (or something like that). The NotInList event doesn't work - any ideas??
I have used John Big Bootys Dynamic Search Form, however to search on the fields I want I have created a query which has mutiple tables and when I get a duplicate value in the search box, i.e. in Client, there are 2 client "A"s and when I click on one it automatically chooses both.From here I want to create a double click event to open that records in a form, but I can't if it defaults to both records.
Is it possible to make a form where you have two textboxes to search a table and show the search results in a list under the textboxes? Also making the list items clickable?
I'm relatively new to Access 2010. I have an excel spreadsheet that I've converted into an access table for the purposes of creating a user friendly form for the end user to search for relevant criteria to retrieve a list of records that fit the requests. There are two main search functions: unbound keyword search (90+ keywords), and either a series of checkboxes or one list box that lists specific countries/regions matched in a column (columns, as I will get to shortly). The region selection is bound by a selection of 15 countries.
The key is each record can correspond to more than one country. This, one record can have "Belgium, Germany, brazil" and the next record can just have "brazil". Thus if someone selects brazil, the query must retrieve the Belgium Germany brazil record in addition to the record that covers just brazil. I've tried to do this with a concatenated column that list all countries and a text box search, I've tried to do this with individual checkbox columns for each country with checkboxes in the search form...and I can't get it to work. I don't fully understand the criteria to set for checkboxes or list boxes. What would be the best way to build this form, an how?
I have created a multi field search form that have 2 textbox and 2 multiselect listbox(extended). How to make the search form query correctly? Below are the details.
I also have a button that run the query qrySearchForm .how am I going to make the query run successfully with multiselect listbox ? I understand that there are a lot of examples of the vba code for multiselect but that is only for multiselect alone and not like my search form that combine textbox and multiselect listbox.