Modules & VBA :: Setting ControlSource To Sum Shows Error
Feb 2, 2014
In my application I have continuous form with unbound textbox. In OnOpen form event I change ControlSource property of textbox to one of the fields (e.g. "Kol921") in forms recordset. In form footer I have another unbound texbox where I defined ControlSource property as "=Sum([Kol921])".
Values in fields shows correctly, but in "sum" textbox I get Error.
When I get through code in debugging mode (with F8 key), value in "sum" texbox shows correctly, but when I open form normally I get an Error in that textbox.
Here is part of code:
Me.Controls("mat1").ControlSource = "Kol921"
Me.Controls("mat1").Visible = True
Me.Controls("matSum1").ControlSource = "=Sum([Kol921])"
Me.Controls("matSum1").Visible = True
I am getting an error msg when i get to the line "Set frm = Forms(vFormname).Form". Error 2450, cannot find the referenced form...
'Code:
Dim frm as form ' Check If saved dynamic field exists SqlStr = "Select ReportListID, DynFieldName, DynCalc, FormName, UserName From DynFields Where UserName = '" & GBL_Username & "' AND ReportListID = " & projectid Set rs = db.OpenRecordset(SqlStr, dbOpenDynaset, dbSeeChanges) If rs.EOF = True And rs.BOF = True Then GoTo Exit_DynamicFieldCreator
I have multiple reports that use similar IIF statements as the controlsource for four textboxes. Naturally, I don't want to have to update twelve controlsources if any of the calculations change, so I thought I'd make this a public function. However, I don't know how to pass along multiple textboxes as variables. Here's what I have so far:
Code: Option Compare Database Public Function txtColor(ByRef textbox As Control) Dim str1, str2, str3, str4 As String 'The IIf statement is simplified for this example. It's not important. str1 = "=IIf(IsNull([Inquiry start date]),'W',IIf([txtInquiry]<1 And IsNull([Inquiry end date]),'R'))"
[Code] ....
And this is in the report (where ??? is what I'm asking about)
Code: Private Sub Report_Load() Call txtColor(???) End Sub
In my database main form with subform. subform have query as recordsource.total of one of field in subform shown on main form. all is ok and show total correctly but when subform have no records then total field on main form shows #error. How to convert this value either into null string or zero(0).
Ive created a table in Access but when I click on the filter option, it comes out blank.Im using VBA code to populate the table from SQL server.All other column work fine.There is data in that column.
The following code browse from one form to another and shows the record details I select in the first form which is what I need, however, the problem is it only shows that record and will not allow me go to next or previous records when pressing NEXT or PREVIOUS by saying this is the First Record or this is the Last Record.
Anyway to modify it to allow me navigate to other records.
Dim txtJobNumber As Integer Private Sub Job_Number_DblClick(Cancel As Integer) 'Store Job_Number in txtJobNumber variable and display message to show value. txtJobNumber = [Job_Number]
I have a form with a search box, Its UNBOUND called ID . Everytime I search for an ID number it shows no results, However I know there are entries in the table. This is the code I am using :
Code: Private Sub ID_AfterUpdate() If (ID & vbNullString) = vbNullString Then Exit Sub Dim rs As DAO.Recordset Set rs = Me.RecordsetClone rs.FindFirst "[Id] LIKE ' " & ID & " ' "
[Code] ....
I am assuming I need to add something to search for auto numbers but i don't know what!
I am a bit of a novice when it comes to Access, but have managed to create a form with a subform embedded and various filters to show different data within the subform, including a date range filter. The code I have used for these filters is as follows:
Private Sub Command40_Click() Dim strCriteria As String
This all works fine, but I'm wondering what I need to add to this code to make it so that if the date boxes are left blank, records from all dates are displayed. At the moment I have to enter dates in order for it to work properly.
I am opening an excel file from access and changing the formatting from "dd/mm/yyyy hh:mm" to number with 15 decimal places.Then I am linking the file to the database and subsequently doing a lookup on the date time on the access form against this table.The excel file when formatted from vba in access shows the wrong number
datetime = 03/05/2013 11:26 database number = 41397.4763888889 Excel file number = 41398.4763888889 (which would equal 04/05/13 11:26)
now if I do it manually then I get 41397.4763888889 or if the macro is in excel I still get 41397.4763888889.Also I have tested the code with manually editing the excel file and this works fine.
Code: Private Sub Command288_Click() Dim s As String Dim t As Integer Dim ws As Worksheet s = LaunchCD(Me) MsgBox (s)
[code]....
also this brings up a form and then I select the field required for the lookup and with the button is pressed the rest of the code runs as follows.
Code: Private Sub LoadData_Click() Dim w As String w = Forms![frmList1]![Combo0] w = "[" & w & "]" Dim dtA As String
I have a unbound text box being used as a label. In the control source of the text box I have a date ie. =#12/31/2008#. I am using this date for criteria in a dsum function, so whatever date is in this field effects the data being displayed. I need to be able to have the user edit this date when necessary. I created another unbound text box and put the following code in the after update: Me.ReestDate.ControlSource = "=#" & Me.EnterReestDate & "#" This is working as it is displaying the correct change. My problem is that the control does not retain the date. When I exit out and go back in, the original date is still there. Is there some code that will save the field after I update it? Or maybe another suggestion to do what I need. Thanks Gregg
I am trying to set a ControlSource for a textbox to a string what is the correct syntax?? I am also trying to set a record source using DLookup, this is also not working. Could some look at my syntax an correct me.
Reports(!strReportName)!txtClientName.ControlSourc e = "All"
I have a form. The form is bound to an underlying query which is a left join between two tables. (SELECT ... T1 LEFT JOIN T2 ON T1.RID = T2.RID ....)
Now, what I want to happen is the value in T1.RID does have a match in T2, then I want a sequence of text controls to be bound to fields from T2, otherwise I want them to be bound to fields in T1.
I almost have it working. I have Form_Current() and T1_RID_Change() both calling a routine
sub BindControls() if isnull(T2_RID.value) then txtField1.Controlsource = "T1.Field1" txtField2.Controlsource = "T1.Field2" ' etc for each field else txtField1.ControlSource = "T2.Field1" txtField2.ControlSource = "T2.Field2" ' etc for each field end if end sub
The problem is that when I change the value in T1.RID, most of the times it does change the controlsource appropriately. But other times it lags. It keeps the wrong controlsource until I try changin RID again, and sometimes the text boxes are just blank, so I am not sure what is going.
Am I ultimately going to be able to make this scenario work?
I want to design a common Search Form which should read records from different table sources and populate a sub-form depending on the user preference. The recordsource of the form should change to point different table or query name depending on user option.
Similarly, the underlying text controls should have their control sources changed to appropriate field in the table selected.
How is this done in run time.
For example, I have two tables and forms (1) for Currency (t_CurrcyMas) and (2) for User details (t_USerMas). I have search form named frmSearch. This has criteria defined as txtCri1, TxtCri2. Depending on the entry of criteria, matching records should be displayed as continuous form in two text controls named txt1, txt2 under sub-form frmSubSearch. The recordsource of the form.frmsearch should be changed to t_CurrcyMas and control sources of Txt1, Txt2 to be changed. WHat is the syntax for this, and in what event do I insert the codes.
I have a form with two subforms. One of the subforms has five subforms (subsubforms).
The ControlSource and the (query sequence for each) RecordSource of each of the subsubforms are created on-the-fly. The subsubforms have no Master/Child relationships specified. The subsubform merely display various filtered and various grouped subtotals of the 1st subform. Summing and grouping on the subsubforms prevents my using Master/Child properties.
On the AfterUpdate event on any of the filter fields on the form the ControlSources and RecordSources are rebuilt and the form becomes invisible for some reason and appears to hang, even after stepping through all the (class module) code with the debugger. Repeadedly clicking both Maximize and Restore buttons on the form's button on the Status Bar followed by clicking a 2nd form's toolbar icon causes the form to become visible under the 2nd form. The tool bar are also not visible, just a large brow bar at the top of the form. Moving the mouse over the toolbars causes individual icons to become visible or raised.
What am I missing?
Maybe I should calculate the values using DAO recordsets and backfill unbound subsubforms.
I am trying to design an unbound combobox whose rowsource can be dynamically set based on a union query in order to search 1000's of names returning each name that contains a user defined string. The search does not start until the user defined string reaches 3 characters in length.
There are more details in the attachment but basically the vba code I used all saves OK in the vba editor but I get a runtime error 13 type mismatch when the code attempts to utilise the query to populate the rowsource of the combobox.
I have a combobox that selects the customer and shows related information on that customer such as phone number, cc#, etc..
now the trick is i need to allow the selected member to be added to the order information.
For instance, the user selects the customer "Bob" and bobs information is displayed to check for accuracy. After the info is approved the user will continue to process his order. In order to do this I need the customer ID to be the same as the selected customer in the combobox.
Then the user will proceed to fill out the order information, location, date, time, etc.
The expression On Click you entered as the event property setting produced the following error: Procedure declaration does not match description of event or procedure having the same name
Now this is the error message that I am constantly getting from any command button I hit on a certain form. Here is the code of the form.
Option Compare Database Option Explicit Public inputCSV As String, ORG As String
I changed the names of the buttons, reconstructed the code under those names, went to the modules and changed names, made sure that a sub o function name is not duplicated in the project... But helas the error is still there. It used to work and suddenly does not work.
I have a button in a form that brings the user to a table to add a new record. I want the feild of "dates" to be automaticlly populated with a value that is 7 days after the previous date in the field. the code i have currently is
Code: Private Sub Command14_Click() DoCmd.OpenTable "Cincinnati Time Sheet", acViewNormal DoCmd.GoToRecord , , acNewRec End Sub
I am new to Access and to the forum. I made a check printing system
table name = 'burgan' form name = 'burgan cheque' Fields = 'PV' and 'cheque' and 'Beneficiary'
I have inserted a button (Command31).The function I would like to add on clicking the button
1. it should chose the highest value in both fields (PV and cheque) 2. Create new record 3. Increment it by 1 (both fields 'PV' and 'cheque') 4. the focus should stand on 'Beneficiary' field.
I'm populating a report with a query which pulls criteria from a form. When the 'run' button is pressed it opens the report, running the query, to filter the data. What i'm attempting (and it works if there is data present).
The data is text, which is a filename, which populates an image control. Most of my records have an image present but for the ones that don't I think I need to turn the image control's picture property to 'blank'.
I'm just now encountering problems with the records with no pictures so when i came up with this it worked with my tests which at that time only had images present....
I have two problems.
1) When I run the code as below i get Run-Time Error 2185; you can't reference a property or method for a control unless the control has the focus.
2) when i try to set the focus on the picture control in the report to see if there is text/value present i get runtime error 2478; database doesn't allow you to use this method in the current view.
I assume this is talking about me opening the report in acViewPreview mode but i thought i needed to do this so the images are displayed in the image control.
Code: Private Sub Detail_Format(Cancel As Integer, FormatCount As Integer) Dim strDBPath As String Dim strRelativePath As String Dim strPath As String 'rptOriginalOwnerCategoryItem!Picture.Text.SetFocus [B]Me!Picture.SetFocus[B] 'Test to see if the record has a relative path stored
I am trying to set a filter on a form with VBA using variables and having no success at all. The code I tried last, which seemed to be "close, but no cigar", was:
sLastSource and sBiller are global variables. When I debug this code the sFilterValue is exactly what I would plug in manually and the Me.Filter shows up as "[Field Name] = Filter Value". But it crashes on Me.Filter = sFilterValue. I have tried all sorts of combinations but nothing I've tried works. What is the proper syntax for using variables as filters?