Modules & VBA :: Split Form - Unbound Textbox To Recordset (Vice Versa)
Jul 8, 2015
How to have the function of a splitform to a "mainform and subform"?
I have a main form "frm_main", and a subform "tbl_main" in continuous form which is linked to the table "tbl_main".
I want to be able to click on the record, then the infor will appear in textbox on the main form. I also want to be able to change the value in the textbox and on after update, it will update that record on the subform as well.
So far, in the frm_main Current, I have added the code:
Private Sub Form_Current()
Form_frm_main.lblClient = Me.client_id
End Sub
So now, what code should I add to the After update of the textbox to find the current selected to update back the value of the textbox to the selected record?
I am trying to create a medical records inventory. We have physical charts which each have a barcode and I have a scanner. The idea is to have employees who want to check the chart out scan their barcode (on their badge), scan the chart's barcode and leave.
I have a table called tblCharts with the fields: ID (primarykey which is also the chart number), a checkbox, Employee ID, Date, and Time checked out.
I have Employee ID linked to my tblEmployees that simply has a listing of the employee ID's and first and last names. I don't care about keeping a record of who has had the chart in the past.
I just can't figure out how to tell the checkbox to be checked (to indicate the chart is out) when a number is added to the ID field (via scanner).
So here's how it would go:
Scan the chart's barcode which would populate into the ID field. Search to see if the record with the same number is already existing, if not create a record. IF it does exist, check to see if the checkbox is checked. If it is checked then the chart is being checked back in (so uncheck the box). If it is not checked to begin with (still in), then check it out and associate the employee's scanned barcode with it.
A bit of a longshot me thinks! But anyway... can you make a measurement converter on Access 2013. I would like to be able to convert meters into feet and feet into meters!
I have a form, which is bound to a table, with an unbound textbox.
I am trying to get the number of months an employee has/had worked.
In the table are two dates, Company Start Date, and Resignation Date.
There are three scenarios in which I need to calculate the months:No Resignation Date
A Resignation Date in the future A Resignation Date in the Past
See attached PDF
The Employees are under a one-year contract which ends the day before the one-year anniversary.
I originally tried using DateDiff in the Control Source, but the IIF seamed too limited for my needs.
Code:
If [Resignation Date] = "" Then If Month([Nichii Gakkan Start]) = Month(Date) Then If Day([Nichii Gakkan Start]) < Day(Date) Then MIS = DateDiff("m", [Nichii Gakkan Start], Date) - 1
My form has a button that opens another form on which I enter meeting RSVPs. Then that form is exited. I have an unbound text box on the main form that I want to show the total number coming. I have a summation query that totals the number. I have tried everything I can think of to force the text box to requery. I tried putting the dlookup in the textbox itself, then I removed that and tried all of the things below, both in the gotfocus event and the onCurrent event. What else can I do to trigger the recalc?
Private Sub Form_GotFocus() Me.numcomingtxtbox.Value = DLookup("howmanycoming", "numcoming") & " Coming" Me.numcomingtxtbox.Requery Me.Recalc End Sub
As the unbound parent list box record selection is changed, I want the sub form to refresh. Do I put code in the Subform Current Record event?
Master Form Name: frmsr_NewWellEntry Unbound Listbox - when record selected the primary key populates txtNavWellID (unbound) on parent form
subform Container fsubsrNavSHLBHL Link Master Fields =Forms![frmsr_NewWellEntry].[txtNavWellID]
The read-only form in the subform Record Source is something like: select * from vsrNavigatorSHLBHL where Well_ID =90243..Key The Form used as the subform above will be re-used in multiple parent forms. The parent form data is form SQL Server, the subform from Oracle.
I have a unbound text box in the form header and have a command button in form I am wanting to put the unbound textbox value into a bound textbox on form.
I'm trying to populate a form textbox which is unbound.
I have table with a list of peoples login names and a query filtering these names once a user logs in. If the GetUserName() matches one of the names in the table then user is authorised. this part seems to be working fine. User not on the GetUserName() list the filter says blank ie Not Authorized.
How to take this confirmed user name and place it into a textbox on a form?
Table name: [tblUserNames] with [IngEmpID] & [UserName]
Query Name: [qryUserNames] with a Criteria GetUserName()
My form has a listbox (lstHeatTreatments - Multi-Select disabled) that displays Heat Treatment descriptions and an unbound textbox (txtHTDetails) that I would like to have display the corresponding memo field when a description is selected from the listbox.
This is my code so far:
Code: Private Sub lstHeatTreatments_AfterUpdate() Dim myConnection As ADODB.Connection Dim myRecordSet As New ADODB.Recordset Dim mySQL As String Dim selectedRequirementKey As Long Set myConnection = CurrentProject.AccessConnection Set myRecordSet.ActiveConnection = myConnection
I have a form with one (field1) on it. Where users will enter data.
I would like to have a unbound textbox on the same form that will flash green if the data entered in field1 matches a value in Table. Or flash red if it doesnt find a match.
I tried the conditional formatting but i think my expressions are off.
Hey, I am trying to figure out how to update an unbound textbox on a form to reflect conditional data in other boxes when each record is viewed (pages works with reports but I cant find something similar with forms). such as if I had an unbound textbox that I want to = firstname+" "+lastname I would want for it to update it every time a user goes to the next record.. I can't seem to figure out a command or method that executes every time someone goes to the next record.. (and Im not too familiar with all the commands that come without a GUI).. thanks for your time
I have unbound TextBox in continuous form and I would like that it never get focus. In property I specified Enabled=No and Locked=Yes. But it doesn't work.
In the attached Database (Access 2007), there are 2 tables - "Source" and "Expected_Output"
1: Table "Source" contains values CONCATENATED in a single row with concatenation string ' OR name = ' With limited knowledge in Access, i tried to perform text-column trying to see if some delimiter could be removed, it messed-up the expected output.
In the attached DB, table "Expected_Output" contains the required output.
2. DB should have the ability to: the values that we obtained in the "Expected_Output" should be converted from multiple rows to single row with concatenations as in the "Source" table Once again i tried using the ' OR name = ' in the query for concatenation and failed again.
Hi: There are two textboxs in my main form. One is bound and another is unbound. There is no entry in the unbound textbox as values come into automatically after entering some information in the subform. My question is how to i pass values from unbound textbox to bound textbox every time when the value change in unbound textbox i need to change the value in the bound textbox. When the form load there is already value in the bound textbox which i want to override based on the values from the unbound textbox.
i open a query as a recordset in VBA. i then need to use the split function to split up a few fields. how do i do this for the entire recordset.
for example: MySplitVar = split(rst1("Field1")) now i need rst("Field2") = MySplitVar(0) rst("Field3") = MySplitVar(1)
keep in mind i can't write to table. i need to somehow create a new recordset (maybe clone) and add columns to it. also, i don't know if this is relevant, but i will need to do this for up to 12 columns which means that i will have two per column; i.e. total columns=24
I see that nobody is posting an answer so i will add an explanation what i am doing.
i came up with a great idea. i need a crosstab that shows two values. so i created a a column that has both my columns in one column. value column shows the following: myValue: = myFirstValue & " " & mySecondValue and in the total i select First. so now i have a crosstab that shows two numbers with a space between them. now i have a report that will show this crosstab query. then i set each field's controlsource on the report to a particular field on the crosstab. my problem is that i first need to split it up and i am stuck there. i need to somehow add columns to the recordset.
I have a form that calls up an employee that also lists their hire date. I have an unbound text box that calculates the years of service by DateDiff(). It works for the first record but sticks for all the subsequent records. I've tried an afterUpdate or Change on the bound Hire_Date text box that is Me.txtYearsOfService = DateDiff("yyyy",Me.Hire_Date,Now) but it still sticks to the first record.
I'm sure this is basic but can't see the obvious. Please relieve the pain.
Hi all, I am experiencing problems trying to put together what I thought was a simple form that would allow users to search for data from a field on one table and display the results in a data grid style from the query I have created. However the query is'nt working and I am sure it is because of the way I have coded the query to read from the form's textbox. The SQL code is below.
SELECT tblFiles.Vault, tblFiles.Wlt, tblFiles.CD, tblFiles.Media, tblFiles.ProjectNo, tblFiles.ProjName, tblFiles.FileName, tblFiles.Location, tblFiles.NetLoc, tblFiles.CreDate FROM tblFiles WHERE (((tblFiles.FileName)=[forms]![frmArchive].[txtprjname].[value]));
There is a value in that field as 'attachment' and if I type that in the textbox it will find the records that have exactly that string but if I type 'att' there are no results. I tried searching in help for 'Like' since I believe that is the problem with my code but it did not show me an example of how to code that in the query to refer to the object on the form.
the code I have on the button next to the unbound textbox is as follows...
Hi all, I am experiencing problems trying to put together what I thought was a simple form that would allow users to search for data from a field on one table and display the results in a data grid style from the query I have created. However the query is'nt working and I am sure it is because of the way I have coded the query to read from the form's textbox. The SQL code is below.
SELECT tblFiles.Vault, tblFiles.Wlt, tblFiles.CD, tblFiles.Media, tblFiles.ProjectNo, tblFiles.ProjName, tblFiles.FileName, tblFiles.Location, tblFiles.NetLoc, tblFiles.CreDate FROM tblFiles WHERE (((tblFiles.FileName)=[forms]![frmArchive].[txtprjname].[value]));
There is a value in that field as 'attachment' and if I type that in the textbox it will find the records that have exactly that string but if I type 'att' there are no results. I tried searching in help for 'Like' since I believe that is the problem with my code but it did not show me an example of how to code that in the query to refer to the object on the form.
the code I have on the button next to the unbound textbox is as follows...
I'm having a problem with one of my forms, i have created an unbound text box called Hours. In it i will type a number. Then click on a button to create a report based on this number.
what is happening though is that when i click the report button the report is blank, if i close the report and then click the button again i get the expected results. What seems to happening is that after i click the button the first time the form refreshes itself and the number is picked up.
Is there any snippit of code i could add to the print report button so it will work first time?
Special situation: The SQL Server Linked Server across the country is linked to a Read Only Oracle DB. This data pull works perfectly and populates the Subform.
The problem is that Oracle can take 3 to 6 seconds to retrieve the single record depending on the network traffic through a small pipe.
The code below shows the RecordSource for the SubForm. clicking on a list box supplies the value. Then 3 to 6 seconds later, the subform populates.
The actual Recordset for this Recordsource is needed to conduct Validation on each field. Normally this would be on SQL Server, I might just create a Recordset Oject and run this SQL statement again in 1 milisecond. In this case, it will probably take an additional 3 to 6 seconds. Avoiding another lengthy round-trip to Oracle would be prefered.
Goal: How does one grab, clone, or other wise reference the existing recordset for the SubForm?
Note: Immediate Window - One single field can be returned quickly
There are 48 fields that need validation - is there a way to reference the entire recordset?
Immediate Window during Break Mode: ? me.fsubsrNavSHLBHL("NavSH_QQ") NESE ' this is the correct value for the current recordsource
Set a breakpoint right after the line: fsubsrNavSHLBHL.Form.RecordSource = "Select * from vsrNavigatorSHLBHL where Well_ID =" & txtNavWellID.Value
Immediate Window: ? me.fsubsrNavSHLBHL.Form.RecordSource Select * from vsrNavigatorSHLBHL where Well_ID =91229
Can anyone help me out here. I need to use an unbound text control to return me a value if a field is populated else "Local" if the field is not populated. Can anyone tell me if this is possible and show me the syntax if it is. Help appreciated. Andy
i have a form with a unbound text box were a date is added by a user and then a command button is clicked and if the date entered is say 10 days older than the todaysdate date it opens a different form something like this??
i have an unbound form where users can enter as much or as little as they'd like to search the database. i'd like to have default values for two unbound textboxes for initial date and ending date. i was wanting to put in 1/1/1999 for initial and 1/1/2050 (or another high number) for ending date. however, when i put those values in the Default Value property for each textbox, it changes to 12/30/1899..for both the initial and ending dates...how do i get my dates to show up?
