Modules & VBA :: Test If Form Field Fits Within Range Variables
Mar 4, 2014
I have an Access form that gathers students test scores on Reading & Writing exams. Depending on those scores, there are five possible classes for them to be assigned.
I have the intervals worked out, and have created a table that contains the min reading, max reading, min writing, max writing, and class they belong in.
The scores are entered into a form as scoreReading & scoreWriting (integer)
I'm trying to figure out the best way to pull and compare the values and return the proper englishPlacement text. Its set up this way because there are multiple tables to pull from, depending on the date of the exam. Each table has different ranges for each Eng1,...,Eng5.
I'm thinking perhaps to iterate through each column and evaluate T/F, then return the englishPlacement value of the correct row. I'd like to keep this stuff in the VBA so that the code to select a table based upon date doesn't break when the intervals inevitably change requiring an additional table.
my issue is i have multilble text box in my form & based on change in one of this text box i need the code to compare between data in the form & table & returm Msg if it is not matching. attached screen FYI.
i look in the internet but i could not figuer out the VBA code since i do not know VBA. what comes to my mind to to use select case.
I am using Access 2013 under Windows 7. In my database I have a table, tblStock, with field names Module, Component_1, Component_2, etc. up to Component_50. I also have fields Qty_1, Qty_2, etc. up to Qty_50. These field names are not easily changed as they are constantly updated from another database. I want to create a table, tblTempBOM, using VBA by selecting a particular value of Module selected from a combo box on a form, from tblStock and creating a record with the Fields "Module", "Component" and "Qty" for each Component and Qty from 1 to 50. I am trying to use a From... Next... loop to cycle through the Component and Qty fields and store the data in the new table.
Dim strModule As String Dim strSQL As String Dim strQty As String Dim strEye As String Dim strTest As String
[code]....
This runs to the point where I try to set the value of rcd![StockCode], but the item rcdStock![strTest] has no value.Can I reference the value of the field in the rcdStock Recordset in some other way that would work?
My problem is as follows, i have created a report that calculates the total volume of FSC Materials. The user picks two dates from Calender controls that the report will range from. However the needs have now changed and i am required to make the report filter further based on user input, the problem i'm facing is that i cannot figure out a way to pass values from different variables to the report separate from another here is the code i would usually use to pass data to a query/report:
Code: Private Sub MonthlyFSC_Click() Msg = MsgBox("Select the Start and Finish Dates you wish to Query.", , "Start / Finish") Start = adhDoCalendar() Finish = adhDoCalendar()
[Code] ....
However i am now trying to do this, but it gives me an error as it is trying to pass the values to one field:
It is performing incorrectly within the case select and passing the wrong criteria, as it will only display results that meet the default values' criteria. However the date criteria is not be passed either.
I am fairly new to VBA and am trying to apply a filter within a form so that agent records can be filtered based on an agent's name (so that they can only see information that refers to them).
I also want a record to be removed when it has been completed (when this habbens a date completed field will populated) however I do want to see those completed records that refer to the agent that have been completed today.
Here is my code. The 2 filters work on their own howver when I put them together I get a mismatch error.
If Me.txtRole = "Agent" Then DateCompletedFilter = "(DATECOMPLETED Is Null) Or (DATECOMPLETED = Date())" AgentFilter = "CASEOWNER ='" & Me.txtName & "'" DoCmd.ApplyFilter , AgentFilter And DateCompletedFilter Exit Sub End If
I'm looking at importing data into a table from a spreadsheet. The spreadsheet will only contain a single column of data, while the table in Access will have a few more, some of which will would be will provided from the form the user is using to import the data, and some at a later date.
Is there a way to do this? I've found the "DoCmd.TransferSpreadsheet acImport" command, but not sure this fulfills what I need, as I can't see a way to set variable data.
Here is a brief idea of what my Table would look like, where where the data to import would be obtained from
I am trying to set a filter on a form with VBA using variables and having no success at all. The code I tried last, which seemed to be "close, but no cigar", was:
sLastSource and sBiller are global variables. When I debug this code the sFilterValue is exactly what I would plug in manually and the Me.Filter shows up as "[Field Name] = Filter Value". But it crashes on Me.Filter = sFilterValue. I have tried all sorts of combinations but nothing I've tried works. What is the proper syntax for using variables as filters?
I have been at this for almost 3 weeks now and I'm having great difficulties trying to get this right and working. First let me explain what I am doing and what I am trying to do.
Firstly, I am making a Maintenance database using MS access software, what I have are tables, forms and no queries or report existing so far. The forms and tables all work correctly.
After the form (Job request) has been completed I need to save/export into PDF so I am able to hyperlink it against its existing asset card elsewhere.
now what I have done is Created button, on event "on click" I have tried to go to macro builder
ExportWithFormatting Objet Type: Form Object Name: FrmMachineFault/GenMaint Output format: PDF Output file: Auto Start: No Template File: Encoding: Output Quality: Print
when I click this button it opens to save to and it works perfectly but I have to manually type the file name when it gets to the Save to section.
What I want it to do is define the name by the existing fields in the open form. Example Closed date, Effected area, Asset and title.
Following concerns about someone accidentally deleting the access database we have been using to crunch performance numbers, I have successfully moved the data on to an SQL server
While the database works as it is, several of the queries are running extremely slow. I therefore decided to see if a stored procedure could run the number crunching on the server instead of passing the data back and forth all the time.
I have taken the series of queries and converted them into a stored procedure that runs too fast for me to blink while giving the same results as before.
The problem I face is that I can trigger the stored procedure from the server management studio manually while supplying the variables needed thus providing the data I need to export to excel in a table for this purpose.
What I want to do is to have a form in access supply the chosen variables (like I could before) and run the stored procedure at the click of a button as part of a series of other queries.
I have looked at pass-through queries but apparently they do not take kindly to variables unless they are hardcoded. The other solution would be to trigger it from VBA but I have not been able to find a solution I could get to work.
How to run a stored procedure on an SQL server from access while also giving it the variables it needs?
Stored procedure name: spNearMissCalculation Variables: @SelectedDate (date format) (taken from a form field) @SelectedVessel (nvarchar(max) format) (taken from a form field) @SelectedVesselGroup (nvarchar(max) format) (taken from a form field)
I am working on an form (using Access 2000 and VBA) that stores registration information, along with events that were attending, in a table and later retrieves that same information from the table to display the regist. info, events attended, and allows the user to change any current info along with adding new/recently attended events to each record. I am currently allowing a max of six events, along with event details, to be stored and I am running through six different if statements to match the Event_List (name of the combo box that contains "Event 1 Event 2...Event 6") to the appropreiate information in the table. I have started to simplify the code to remove the redundancy by running a Do While to to find the correct Event by using an integer variable that starts at 1 and is incremented until it matches the 7th character (the number portion) of the Event chosen from the Event_List. After this I want to use that integer variable to say what event information in the table to gather. My problem is this: I have tried many different varieties of the following code and I am unable to make it work. I had never used Access up until a week and a half ago, and a few days ago I went and bought the book "Access VBA Programming for Dummies" but it doesn't help for this problem. Here's part of the code:
Variables (Event_Name, PMT, Receipt, Payment_Type, PIF) refer to Form textboxes while the variables in the [] refer to table field names.
'------Code I'm Currently Working On------- Dim intX As Integer Dim EventVal As Integer Dim strX As String
intX = 1 EventVal = Val(Mid(Event_List, 7, 1)) Do While EventVal <> intX And intX < 6 intX = intX + 1 Loop
strX = str(intX) Dim E_Name As String Event_Name = [Event strX ] PMT = [PMT strX] Receipt = [Receipt strX] Payment_Type = [Payment Type strX] PIF = [Paid In Full strX]
'-----Old Code That I'm trying to simplify------- If Event_List = "Event 1" Then Event_Name = [Event 1] PMT = [PMT 1] Receipt = [Receipt 1] Payment_Type = [Payment Type 1] PIF = [Paid In Full 1] Camp_Site = [Camp Site 1] Cabin_Number = [Cabin Number 1] ElseIf Event_List = "Event 2" Then Event_Name = [Event 2] PMT = [PMT 2] Receipt = [Receipt 2] Payment_Type = [Payment Type 2] PIF = [Paid In Full 2] Camp_Site = [Camp Site 2] Cabin_Number = [Cabin Number 2] ElseIf Event_List = "Event 3" Then Event_Name = [Event 3] PMT = [PMT 3] Receipt = [Receipt 3] Payment_Type = [Payment Type 3] PIF = [Paid In Full 3] Camp_Site = [Camp Site 3] Cabin_Number = [Cabin Number 3]
I have a form that has several drop down menus on it. I use the form to filter the database to only the options that are put into the drop down windows. I have it set up so that every window does not need to be filled in for the filter to work. Now I am trying to figure out how to put the option of a date range on my form as well. The code that I am using to make everything up to the date range work is.
I'm having problems creating a second subfolder in the main folder.
The main folder is used to keep inside the reviews of clients inside.
The code I have now, will only create a main folder if it does not exist and then a subfolder with the BIN nr, type review and date. If the client would have a diferent ones and in diferent years. So if it has first "Prototype Model", the next one could be "Prototype Review". The part of the code that checks if the main folder exist works, but how to let the code create in the main folder the second review subfolder? Please see below code I managed so far:
Code: Private Sub btn_Create_Folder_Click() 'XXXXXXXXXX working onXXXXXXXXXXXXXX Dim path1 As String Dim path2 As String path1 = "C:Test_FolderMedium" & Me.BIN & "_" & RTrim(Me.LE_Name) & "" path2 = "C:Test_FolderHigh" & Me.BIN & "_" & RTrim(Me.LE_Name) & ""
So I have a search form that I created that has also a subform (a continous form, that has a query as its source) where my records are listed. I started on making a Between dates filter where i would be able to pick dates and get the results of records that are in that range.
I put two text boxes in which I set format to Short Date so that I get the button to select the date from a calendar for each text box. Then I made a button that is only for this and added a Clickon code so that it filters my subform over the recordsource of the form. The problem is is that i get an error and it doesn't filter.
Code:
Private Sub btnDatumUpis_Click() Dim SQL As String SQL = "SELECT qrySearchV.VID, qrySearchV.MarkVoz, qrySearchV.ModelVoz, " _ & "qrySearchV.TipMot, qrySearchV.Regist, qrySearchV.VlaVoz, " _ & "qrySearchV.KorVoz, qrySearchV.KatV, qrySearchV.DatumUVoz, " _
I'm using VBA code to open a query, generate a report for a test and an answersheet. I'm using the same report, and don't want to make many reports. I have the below code which runs my query, and generates the reports.
Private Sub Command2_Click() DoCmd.SetWarnings False DoCmd.OpenQuery "1", acViewNormal, acEdit DoCmd.OpenReport "WrittenExam", acViewPreview, "", "", acNormal DoCmd.OpenReport "WrittenExamAnswerSheet", acViewPreview, "", "", acNormal End Sub
I have a need to be able to set the report title for both reports when running my code.
MS ACCESS 2010,i need to create macro, on insert. which will send mail if is selscted specificed value in combo multivalued list.but, i cant access to that field to test it.
I'm using Access 2003...I have a query that searches a parts table by description:
Like "*" & [Enter in Part Description to search] & "*"
I need to add another search to this query, I added another field to the parts table call manufacturer. I add this field to the above query and added this parameter to it:
Like [Enter in Manufacturer] & "*"
I then added a manufacturer to one of the fields for test purposes. For some odd reason this doesn't work. If I take out the manufacturer parameter and don't enter in anything into the part description the query returns all the records. When i type a description into the part description field the query returns the proper records. When I add back the manufacturer parameter and enter through both parameters only the one record returns showing the test record instead of all of them. If I put a part description in and enter through the manufacturer parameter no records show when they should.
I've tried adding a test field to a different table and tried a different query using the like parameter. The parameter works in a field already in the table but won't work with the new field I added. I've done compact and repair.
I'm having trouble with my VBA module.I have a random test generator which pulls records based on a category from my table into a temp table using a make table query. I use the following code:
Private Sub Command2_Click() DoCmd.SetWarnings False DoCmd.OpenQuery "1", acViewNormal, acEdit DoCmd.OpenReport "WrittenExam", acViewPreview, "", "", acNormal Reports!WrittenExam.lblTitle.Caption = "Exam Name" DoCmd.OpenReport "WrittenExamAnswerSheet", acViewPreview, "", "", acNormal Reports!WrittenExamAnswerSheets.lblTitle.Caption = "Exam Name - Answer Sheet" End Sub
My querry makes the table, and then generates two reports (my exam, and the answer sheet). I'm getting an error 3211, saying the temp table is already in use by another process when trying to generate both reports. I used a Macro before, but I have a need for custom report headings, so I'm using VBA.
Im a relative novice with access VBA, and I'm really struggling with using Dcount with date variable. All I want to do is count if a certain date appears in a table. Here is the extract from my code:
Whatever dates are in tblworkoutlogs, datecount is still = 0...I've trawled the net and tried many variations of the code but no success!if I change all the date formats to strings in the code and the tables, it works so I know i'm looking in the correct place.
I have a public sub routine which requires parameters to be passed to it when I call it from an access form. When I try to enter the code to call the sub I get a compile error. I've also tried calling it from another sub in the same module but get the same compile error - see below.
Code: Sub EmailData(Datafile As String, To_mail As String, CC_mail As String, Subject_mail As String) 'code to use variables passed in End Sub
I am trying to set up some template emails using text someone has entered in a form with a variable indicated with a key word in brackets aka. [ChangeID] or [ChangeDate]. The field on the form is formatted as Rich Text so I am getting http code. (No problems yet) In the form the template is required, I lookup the template required and I get the string. I replace the brackets with the following
I need to set some 'global' variables with default values when my Access 2007 database is loaded. Depending on the user etc these values may be modifed after Access starts but defaults need to be set.
I declared the variables as 'Public' in a Module, then put a function in the same Module (to set the default values) then tried to call the function from an "AutoExec" macro, so it's the first thing that runs when Access loads.The macro throws an error - it can't 'find' the function(?)
I have been tasked to create a multi-keyword search form, however, my form isn't working right and only the first record of the table is opened.
Code: Public Sub txtSearch_AfterUpdate() Dim strWhere As String Dim strWord As String Dim varKeywords As Variant Dim i As Integer Dim IngLen As Long
[Code] .....
These are the codes that I am using for my search form. I have a feeling that I am not calling the variable from the after update portion the right way.
