Modules & VBA :: Text Box Percentage Format
Mar 2, 2015
I have set the format of a text box (named: scrILS) to percentage. It shows on the form as 0.00%
When I try to run calculations off of it like: = [scrILS]*[totBuysFYDP1], it throws this error: #TYPE!
It seems as though the textbox is keeping it as text for the percent sign "%" is preventing any calculations against it... here's the strange part... it doesn't happen initially when I open the form... the calculations work and I get no error, but I have code that recalculates everything based on values picked in a list box... on the requery I get the error.
When I look at the watch frame for that control it shows the scrILS value as:
"00.0%" not 00.0%... any thoughts on this?
I attempted to just take the thing as a string and use a replace function against the "%" then calculating... that works, but then the initial form load throws the error.
Seems like I am missing something in the property settings, but I don't know what. Is there something that forces the format value, setting percentage as a number vs. text?... I thought that was just part of the format setting...no?
View Replies
ADVERTISEMENT
Jan 29, 2015
I have a text percentage that reads 28.0%. I want to convert to a numeric percentage that reads either 0.28 or 28.0%, preferably the latter. The Val function returns an error.
View 3 Replies
View Related
Jul 4, 2005
In one of my queries I calculate a percentage based on a change from one year to the next; however, sometimes there will not be any prior year data hence the percentage is undefined (i.e. current year amount/0=undefined). To stop the query from displaying an error when this is the case I wrote the following:
CapitalSurplusChange: IIf([P/Y Operating Data]![CapitalandSurplus]=0,"N/A",(Nz([C/Y Operating Data]![CapitalandSurplus],0)-Nz([P/Y Operating Data]![CapitalandSurplus],0))/Nz([P/Y Operating Data]![CapitalandSurplus],0))
I have the properties of the field set to percentage, but the calculation does not display as a percentage but as a long decimal. If I take out the Iif the percentages display fine however there are errors for the undefined calculations (hence why I inserted the Iif). How can I amend the code above to only display the "N/A" answers as text. I know about the formatpercent function, however I am exporting this output to excel and this when using the formatpercent or formatnumber operation the data still displays as text and not a number. Any ideas?
View 3 Replies
View Related
Aug 23, 2005
Greetings all,
I am probably just being dense.
But how do I go about entering a percentage of say 5% in a numer field formated to percentage in a table?
If I enter 5 in translates to 500%, .05 as 0!
Thanks,
Brian.
Zimbabwe.
View 2 Replies
View Related
Aug 7, 2013
I have a "make table" query. Inside that query there is a simple expression that divides two fields by one another to arrive at a %. Example 5/100=5%. However, the data returned is not in a % format.I know that I can go into table properties and change the fromat to "percentage", but that will only work for the current table that I have created. Once I re-run the "make table" query, I lose the change to the format, and my value again returns to a number, not a %..
Is there any way to always have a percentage returned without having to manually change the format each time that I run the query, or having to make a "delete" and "append query" ?
View 3 Replies
View Related
May 22, 2006
Hi,
I have a query with 3 fields - PaymentAmount and PaymentTotal. The third field is a percentage of the two e.g:
PaymentAmount = 10000
PaymentTotal = 12000
PaymentPercentage = 83.333333333333
In my form I would like a text box to display the two combined i.e. £10.000.00 (83.33%).
At the moment it displays 10000 83.3333333333333. I can use £#,##0.00 to format the current half, but how can I then format the percentage to display 83.33%?
Thanks
View 1 Replies
View Related
Oct 15, 2014
How can I change with VBA the Y axis of a graph to percentage?
sqlstr = simple sql giving with date, value
Graph47.RowSource = sqlstr
I can give the axes min/maximumscales
.Axes(2, 1).MinimumScale = frm_MinscaleY
set the colors and weights
.seriescollection(1).Border.Color = graphcolor
.seriescollection(1).Border.Weight = Lineweight
.seriescollection(1).MarkerSize = MarkerWeight
.seriescollection(1).MarkerBackgroundColor = graphcolor
But everything I try to set the axis to percentage does not work... No failure message, but nothing happens. I have tried multiple things:
.seriescollection(1).datalabels.numberformat = "0,0%"
.seriescollection(1).datalabels.numberformat = "#,#%"
.seriescollection(1).numberformat = "percentage"
.seriescollection(1).numberformat = "0,0%"
.SeriesCollection(1).tickLabels.NumberFormat = "%"
and a lot more....
View 1 Replies
View Related
Feb 11, 2013
I have two fields CountOFAppeal Description and Amount Solicited.
I just want to get the percentage of response.
So this is what I used:
=[CountOfAppeal Description]/[Amount Solicited]*100
When I go into the properties to format it to % and add decimal places I get a crazy number
2520.46% When it should be 25.20%
When I change the format to general number the decimal point is in the right place 25.20.
View 2 Replies
View Related
Jan 27, 2015
I have a simple query and I want to export it in excel, Comma Separated Value., .CSV
I tried to run DoCmd.TransferText but all of my attempts were futile.
I found it, I must export it as TXT and file suffix insert .csv instead of .txt and it works
Now can I execute this "Saved Exports" through a macro or docmd ?
I insert a picture just to make it more clear.
[URL]] ......
View 4 Replies
View Related
Feb 17, 2014
I have a problem in converting the content of a simple table to a text format I need for an other program. The table is containing 3 columns
- ITEMID
- COLOR
- MINQTY
How do I convert the table to a text format with below format.?
ITEMTYPE is all ways >P<
How is this text shown. Do I make a kind of report.?
I have attached the two document (Text format and DB)
<INVENTORY>
<ITEM>
<ITEMTYPE>P</ITEMTYPE>
<ITEMID>3622</ITEMID>
<COLOR>11</COLOR>
<MINQTY>20</MINQTY>
[Code] .....
View 1 Replies
View Related
Jul 8, 2013
I had the need every so often to quickly find all instances of any (particular) word within the database, without going to the bother of thinking about where that word/subject might be in the data base, I designed a report which does the job nicely. It uses a search form/control, searches and finds all instances of the word (or words) I have asked it to find, then does a report showing all instances of whatever RTF memo fields that contain the word(s).It has to be RTF memo field because (if I wish) it goes straight into the book text I'm writing, and also it searches the book's RTF memo field.
.
The trouble is, at present, I then have to manually "eye scan" the resulting report to find the occurrences of the "key searched for" word, nestling/hidden somewhere within sometimes quite large chunks of text. I would love to have the report show the found "key word(s)" highlighted in (say) light blue or whatever colour, so that I can quickly & easily lock on to it visually.
I enter the word I want Access to find, into a form called "formfindword" in a text box called Text0. I click on a command box on this form, to open up the report called "Querywhatsandhowschooseword" based on a query of the same name. The query's "what" field (from the main database) has the criteria
= Like "*" and [forms]![Formfindword]![Text0] & "*"
The query's "how" field criteria (in the "or" line of the query design) is also
= Like "*" & [forms]![Formfindword]![Text0] & "*"
I have tried to use the Conditional Format facility in Report Layout view, without any luck.I think therefore that I will need some VBA code (which is totally foreign to me, unfortunately) to make this simple concept a reality.
View 2 Replies
View Related
Sep 23, 2013
Had a combobox so the user could choose between two data entry formats.They don't want the combobox, they want the user to enter data into one or the other textbox - and that choice to trigger the format.Two groups of text box - group 1 has a single text box - group 2 has three text box. When the user selects a text box and types the first character into it. This triggers locking out the other group choice and enables the <Validate and Edit> command button.
If the user backs out (deletes) the text in a text box.It basically makes both groups available again and it disables the <Validate and Edit> command button.Basically, if the text box Change event counts a character, it changes the text box Tag to "Bust". Then it calls a common routine that checks both text boxes.The choice won't take place if the textbox gets focus. It changes if a text box has 1 or more character typed in.
Code:
Sub WhosOnFirst()
' two groups of Required field - if one textbox in a group has a character entered first
' that group becomes the Format - enables the <Validate and Accept> button that will take the next setp
[code]...
View 2 Replies
View Related
Oct 29, 2013
I have two tables in a query joined by a ID field. The problem is in the one table the ID fiels is a text format and in the other table its a number format so the query builder doesnt like that and gives me the Type mismatch in expression error.
There's no way around it though; i need it to be those formats in its respective tables for reasons i wont go into here for simplicity.
View 2 Replies
View Related
Jul 24, 2014
I'm about to connect my DB to word. So I made a form where the user has to choose what entry to export. The data is inserted in a word file in different bookmarks. But there is one special task to insert the rich text so in this case the html formatted text is displayed like this:
Code:
<html><div>asdf</div></html>
My Text is inserted like this:
Code:
wdApp.ActiveDocument.Bookmarks("-Bookmarkname-").Range.Text = Lrs("-ColumnName-")
Lrs is a Recordset.
So how is it possible to display the html code right in the Word doc?
View 1 Replies
View Related
Jun 11, 2013
I have a query that has clients sorted in the row area and a column from my table that is set up as text but only has yes/no options for the data. I have a pivot table that counts the yes's and counts the no's and finds a grand total; however, I want to be able to find the percentage of pass's given the grand total. I'm able to do this in Excel and was wondering if it was possible in Access.
View 2 Replies
View Related
Dec 31, 2007
I have a text file delimited and uploaded the information to a new Access Table. One field "MarketValue" has a number followed with a percentage (i.e. 100%, 54%, etc..), however it converts as a text column.
How can I convert the column to a TRUE percentage field representing the value originally imported.
View 5 Replies
View Related
Jan 22, 2008
Hi all,
I would very much appreciate help with this one. So thanks in advance if anyone can help.
I have a table which has a Text Field (it has to be, I'm afraid). The data is listed as follows:
5.6%
12.23%
2.45%
etc.
I need to use these values to multiply other figures in queries. I have tried FORMAT and various other ways in the query to convert the data, but to no avail. All I get as a result is an ERROR. Anyone got any ideas?
Ginny
View 6 Replies
View Related
Jul 7, 2015
I want to format the text using format function. how i format the word apple to "apple" (With Quatation mark).
str = Format(Me.word, xxxx)
View 3 Replies
View Related
Jun 6, 2013
I have about 20 columns in a query and each row is a customer.
The columns are either pass/fail but are text fields and not a yes/no set up. I want to get the percentage of a pass in the column.
View 9 Replies
View Related
Apr 7, 2014
I am trying to add a percentage sign (%) after a number I get from a table, thus the number 1,5 should display 1,5% and NOT 150%.
I am using the Format Property of the text field.
I tried #,##% which converted the value to a percentage (1,5 became 150%) Then I tried #,##"%" and #,##\% Access ignored both and changed the value in the property field to #,##% Using the Format function is not an option because it is a bound field which should be editable.
View 3 Replies
View Related
Jan 27, 2015
So I have a report with the following text box controls:
[Surname] & ", " & [Firstname]
=Sum([Quarter1_A]) - Named "Quarter_Total"
=Sum([Quarter1_T]) - Named "Quarter_Target"
=Val([Quarter_Total])/Val([Quarter_Target]) - Named "%Target" (Percent Format)
The report is grouped by the expression '[Surname] & ", " & [Firstname]'.I am trying to sort the records by the %Target text box. I tried entering the expression into the sort function but it still sorts by the grouped expression. I also tried sorting by the name of the text box but got the same results. How can I sort by the desired control?
View 14 Replies
View Related
Feb 20, 2015
I have an access form which 1 person updates daily, but the task after that is split between 2 users. I have got most of the form data automated with a combo box from a supporting table.
But I now want to automate a username & date, but based on a % and set of conditions.
(At the moment I go in at the end of the week and manually put those 2 usernames next to the new work thats been logged)
I'll try and explain:
user 1... gets 60% of the work
user 2... gets 40% of the work
At the end of that day, when the form is completed with say 100 new records, I want to then run a query, macro (or anythying else that would do it automatically), to assign those usernames 'user1' to 60 of those 100 records... and 'user2' to 40 of the records. and also give it todays date.
Is this even possible?
View 14 Replies
View Related
Dec 18, 2014
I have two numbers, i need to calculate how much percentage of one is the other. E.g
num_1 = 100
num_2 = 10
percent = 10%
Users enter a dollar amount (retainer) and my code should calculate the percent of the total proposal amount.
Actual Code
Private Sub cmdSubmit_Click()
Dim intProposalTotal As Double 'if i use interger i get "overflow" error
intProposalTotal = Nz(DLookup("ProposalTotal", "qryPropsalTotalForRetainer", "proposal_id=" & Me.proposal_id), 0)
[Code] .....
billing_retainer_percent is formatted to Percent with 0 decimals. In the actual table Type - Number, Format - Percent, Field Size - Single. What i get is 100% instead of 10%.
View 4 Replies
View Related
Mar 29, 2005
I want to format the Telephone number input mask to show
(999) 123-4567 ext 1234
where the extension can be in 3 or 4 digits which is up to the user, or blank if none exists. . .
sorry,
this is one of those non intuitive sections of Access. . .
sportsguy
View 1 Replies
View Related
Feb 18, 2005
Hello all -
I have a text box in a report that I want to combine a label and a date field (date field is based on a table). I need to format the date field to be different than the way it is in the table though. I used the "Format" part of the property window to say (mmmm", "yyyy) but it only works if the date field is the only thing in the text box.
Example:
In the text Box, I want ="Medical Record Review - & [Date Added]" where [Date Added] now says e.g., 9/11/04, and I want it to say September, 2004. Putting (mmmm", "yyyy) in the format part of the property window works only if [Date Added] is the only thing in the text box. Is there a way to include both the text and the called field in the text box AND format the [Date Added] field as I need?
Any help would be greatly appreciated. Thanks much.
View 3 Replies
View Related
Dec 27, 2005
I need help with custom text formating. Everything I read says that @ is "Required text character" and & is "Text character not required", but nothing gives an example of &. Could someone give me examples of the difference between @ and & ?
Thanks,
Jerry
View 1 Replies
View Related
