Modules & VBA :: Type Mismatch Report On-Open For Dynamic Crosstab
Nov 22, 2014
This code runs to the set frm part then i get a type mismatch? ive tried a few different things and still nothing?
Code:
Private Sub Report_Open(Cancel As Integer)
' Create underlying recordset for report using criteria entered in
' EmployeeSalesDialogBox form.
Dim intX As Integer
Dim qdf As QueryDef
Dim frm As Form
' Set database variable to current database.
Set dbsReport = CurrentDb
[code]....
View Replies
ADVERTISEMENT
Jun 3, 2014
I am trying to construct a crosstab that averages a calculated field from a previous query. It is returning a "Data Type Mismatch" message.
The field I am trying to average is a subtraction of dates to find total days. I assume my field is not a number so I have tried to wrap it in CDbl() to change the type.
The formula is
Code:
CASE_DAYS: CDbl(IIf([Actual Close Date]-[Creation Date]>=0,[Actual Close Date]-[Creation Date],""))
View 5 Replies
View Related
Nov 30, 2004
I am using the following cde to generate a Dynamic Crosstab Report. I can get the column labels to work but Ican't get the values to appear in the detail section all I get is #Name?
I am using the following code in the report
Private Sub Report_Open(Cancel As Integer)
Dim rst As DAO.Recordset
Dim db As DAO.Database
Dim i As Integer
Dim j As Integer
Set db = CurrentDb
Set rst = db.OpenRecordset("select * from test2")
rst.MoveFirst
j = 0
i = 0
For i = 0 To rst.Fields.Count - 1
If rst.Fields(i).NAME Like "*test" Then GoTo skip_it
j = j + 1
Select Case j
Case 0
Me.Field0.ControlSource = rst.Fields(i).NAME
Case 1
Me.Field1.ControlSource = rst.Fields(i).NAME
Case 2
Me.Field2.ControlSource = rst.Fields(i).NAME
Case 3
Me.Field3.ControlSource = rst.Fields(i).NAME
Case 4
Me.Field4.ControlSource = rst.Fields(i).NAME
Case 5
Me.Field5.ControlSource = rst.Fields(i).NAME
Case 6
Me.Field6.ControlSource = rst.Fields(i).NAME
Case 7
Me.Field7.ControlSource = rst.Fields(i).NAME
Case 8
Me.Field8.ControlSource = rst.Fields(i).NAME
Case 9
Me.Field9.ControlSource = rst.Fields(i).NAME
End Select
skip_it:
Next i
rst.Close
Set rst = Nothing
End Sub
Private Sub ReportHeader_Format(Cancel As Integer, FormatCount As Integer)
Dim rst As DAO.Recordset
Dim db As DAO.Database
Dim i As Integer
Dim j As Integer
Set db = CurrentDb
Set rst = db.OpenRecordset("select * from test2")
rst.MoveFirst
j = 0
i = 0
For i = 0 To rst.Fields.Count - 1
If rst.Fields(i).NAME Like "*test" Then GoTo skip_it
j = j + 1
Select Case j
Case 0
Me.Label0.Caption = rst.Fields(1).NAME
Case 1
Me.Label1.Caption = rst.Fields(i).NAME
Case 2
Me.Label2.Caption = rst.Fields(i).NAME
Case 3
Me.Label3.Caption = rst.Fields(i).NAME
Case 4
Me.Label4.Caption = rst.Fields(i).NAME
Case 5
Me.Label5.Caption = rst.Fields(i).NAME
Case 6
Me.Label6.Caption = rst.Fields(i).NAME
Case 7
Me.Label7.Caption = rst.Fields(i).NAME
Case 8
Me.Label8.Caption = rst.Fields(i).NAME
Case 9
Me.Label9.Caption = rst.Fields(i).NAME
End Select
skip_it:
Next
rst.Clone
Set rst = Nothing
End Sub
What else do I need to do to get data in the detail section
In anticipation
errolf
View 5 Replies
View Related
Nov 13, 2014
I have a crosstab Query as the source for my report, of course the issue is the column headings on the report. I have Purchasers as a row heading, Year as a row heading, Month/Year as a row heading, Meter as a column heading, PaidMCF as Value and, a total as a Row heading. My issue is feeding the column headings on my report with the meter names.
Purchaser 1 has 23 meters attached
Purchaser 2 has 1 meter attached
Purchaser 3 has 6 meters attached
Purchaser 4 has 2 meters attached
Purchaser 5 has 16 meters attached
Purchaser 6 has 11 meters attached.
View 4 Replies
View Related
Mar 21, 2015
I've made a crosstab query and would like to use it to create a subreport. In the column headers I have names of courses. Courses can be added or removed. How can I make a crosstab report with dynamic columns?
PHP Code:
TRANSFORM Count(tblCourses.CourseName) AS CountOfCourseName
SELECT tblNmscStaff.NmscStaffFirstName, tblNmscStaff.NmscStaffLastName,
tblNmscStaff.PtOrFtNtl, tblNmscStaff.Ntl, tblNmscStaff.NmscID
FROM tblNmscStaff LEFT JOIN (tblCourses RIGHT JOIN [tblNmscStaff/CoursesPointer] ON
tblCourses.CourseID = [tblNmscStaff/CoursesPointer].CourseID) ON
tblNmscStaff.NmscStaffID = [tblNmscStaff/CoursesPointer].NmscStaffID
GROUP BY tblNmscStaff.NmscStaffFirstName, tblNmscStaff.NmscStaffLastName,
tblNmscStaff.PtOrFtNtl, tblNmscStaff.Ntl, tblNmscStaff.NmscID
PIVOT tblCourses.CourseName;
View 1 Replies
View Related
Jul 15, 2015
I am getting a "type mismatch 13" error on this line
Code:
PrinterSel = Nz(DLookup("Device", "tblPrinterSelection", "Doc='" & DocumentType & "'" And "Computer='" & sHostName & "'"), "No Printer")
All vba variables are defined as strings. All fields in the table are text.
mafhobb
View 2 Replies
View Related
Feb 24, 2014
I created some VBA imports from a saved Excel file. When I run it on my computer, it works fine. When my coworkers run it, they get an error "Type mismatch." Some files seem to upload despite the error, but I'd like to figure out why it's happening, especially for cases where the data doesn't import. As a band-aid, I added a line in my error handler that says if the error = "Type mismatch." then just resume.
View 2 Replies
View Related
Mar 17, 2014
common error in VBA imports. It has happened with spreadsheets and text files I have users importing. An error message pops up "Type Mismatch." But the import appears to work correctly. So I added code that On Error, if error Like "*Type mismatch*" continue to next step. Now the user gets a longer error message: "The expression On Click entered as the event property setting produced the following error: Type mismatch." Again, the import still works, but this message is annoying! The even stranger thing is that I do not get this error message on my machine. Just the other users.
View 4 Replies
View Related
Nov 8, 2014
The error I'm getting is "data type mismatch in criteria expression".
Private Sub BtnAddBooking_Click()
Dim CustomerID As String
Dim StaffID As String
Dim intPos As Integer
Dim strSQL As String
Dim strSQL2 As String
Dim BathValue As Integer
Dim rst As DAO.Recordset
Dim RemainingBookingExists As String
Dim RemainingBaths As Integer
Dim RemainingBathsExists As String
[code]....
View 2 Replies
View Related
Aug 5, 2015
I'm using the OnLoad event of a form I've got as a placeholder to load a report from the onclick event of a button on my continuous form, and loading a chkbox into the code as a string variable.For some reason, when the DB automates the procedure, I get a 'Type mismatch' error appear, but when I step through the code using F8 it works.
when I press F5 after the code has stopped I get the 'Type mismatch' error.The chkbox contains a value of '-1', and I've used debug.print to return the TypeName and VarType values, which were 'String' and '8' (which I took to mean 'String') respectively.
There are other variables being declared in the code, and I commented out the whole lot and put each one back in individually before running the code as a process of elimination, and the checkbox was the one that threw up the error again.
Code:
Dim Prod1stSend as String
Prod1stSend = me.chkProd1stSend
We are using the code to determine whether our clients have been contacted by us before, as this will decide which report is opened. I've tried setting the variable as Boolea and Variant too, and both of those still throw up the same error.
View 4 Replies
View Related
Mar 16, 2014
I am trying to apply a filter on a subform but i get "Type mismatch" and i dont know why below is the code.
Basically when they select a line on one subform it filters another from that selection is it somthing to do with the dates?
Code:
Dim MyProd As String
Dim ReqDate As Date
MyProd = Me.ProductCode
ReqDate = Me.RequestDate
Forms!FrmReplenishments.FrmMasterReplenDetail.Form.Filter = "[ProductCode]= '" & MyProd & "'" And "[DeliveryDate]= #" & ReqDate & "#"
Forms!FrmReplenishments.FrmMasterReplenDetail.Form.FilterOn = True
View 2 Replies
View Related
May 26, 2015
I am trying to get my VBA module to find the ID of a Member Number from a table using a dlookup but I keep getting a data type mismatch error,
Code:
Dim Answer As String
Dim varX As Variant
Dim rst As Recordset
Dim strSQL As Integer
Dim stWhereStr As String
Set db = CurrentDb()
[Code] .....
In the table the ID field is an automatic number and the Member Number is a short text field.
View 3 Replies
View Related
Dec 18, 2014
I'm trying to set email address for "Cc" using "Like" but showing error 13 Type mismatch. Problem only red mark code either all are working fine.
Code:
Private Sub cmdSendMail_Click()
On Error GoTo ErrorHandler
Dim strTo As String
Dim strSubject As String
Dim strMessageText As String
[code]....
View 14 Replies
View Related
Dec 3, 2013
I ahve declared custCount as an integer and id as a string that comes from the user form (id = me.CustID) and trying to count the number of matching records in the recordset (rst) using the following:
custCount = DCount("[customerId]", rst, "[customerId] like '" & id & "'")
I'm getting a type mismatch error on the DCount statement?
View 3 Replies
View Related
Jul 13, 2015
I am trying to pass a recordset to a sub procedure as follows
Code:
Private Sub AddNewSProdStatus(rsTemp As DAO.Recordset)
rsSProdStatus.AddNew
rsSProdStatus![ProdID] = Me.Recordset![ProdStatusID]
rsSProdStatus![TitleID] = Me.Recordset![Title]
rsSProdStatus![ProdDealType] = 1
[Code] ....
However, whenever I call the procedure as below
Code:
AddNewSProdStatus (rsCSales)
I get a type mismatch error.
All Recordsets are declared as DAO and contain data...
View 1 Replies
View Related
Jan 16, 2014
I have vba code that creates the following SQL:
SELECT SubscheduleID, EventID, WeekOrder, DayID, StartTime, EndTime, Priority, CanJoin, PatientTitle, PatientNickname, IncludesPatient, IncludesAftercare, Letter1
FROM [qryScheduleCombinedDetails]
WHERE (SubscheduleID = 1 AND IncludesPatient = -1 AND DuringAftercare <> "AC only" AND (WeekOrder = "All" OR WeekOrder = 3 OR (WeekOrder = 1 AND Letter1 = "XYZ")) AND DayID = 2 AND StartTime <= #8:00:00 AM# AND EndTime >= #8:30:00 AM#);
When I try to run it, I get a "data type mismatch" error. When I put the same code into a query, I get the same error. However, it will run if I delete either condition from within the (WeekOrder = 1 AND Letter1 = "XYZ") pairing. I can't figure why it can run with either of those, but not both together.
WeekOrder is defined as String. Letter1 is calculated as Cstr(Nz(IIf(Letter,"XYZ","ABC"))) within [qryScheduleCombinedDetails], because I wanted to make sure that it would be recognized as a string.
View 4 Replies
View Related
Oct 17, 2013
Anyway I've got a type mismatch that I can't figure out.
Code:
dMaxLstReq = DMax("reqNumb", "FlightLog", "Month([txtDate])='" & frmMonth & "'" And "Year([txtDate])='" & frmYear & "'")
In plain english: Select the highest value in the field named reqNumb from FlightLog where the Month of txtDate is equal to the variable frmMonth and the year of txtDate is equal to the variable frmYear.
txtDate is a Date/Time field in the table FlightLog
frmMonth and frmYear are both integer variables that take the system time (sysTime) and determine the month and year: I.E.
Code:
frmMonth = Month(sysTime) & frmYear = Year(sysTime)
Am I correct in thinking that the fact that my variables are integers and not times, that this is the cause of the mismatch?
View 2 Replies
View Related
Mar 15, 2014
I have built in code a long sql statement as follows:
SELECT Age, BirdType, Flock, House, [Lab#], Organ, Origin, SampleDate, SampleType, Site, Source, SourceGroup,
[VT#], ProfileID, APIName1, APIAmts1, APILevels1, FullVals1, Match1, APIName2, APIAmts2, APILevels2,
FullVals2, Match2, APIName3, APIAmts3, APILevels3, FullVals3, Match3, APIName4, APIAmts4, APILevels4,
FullVals4, Match4, APIName5, APIAmts5, APILevels5, FullVals5, Match5, APIName6, APIAmts6, APILevels6,
FullVals6, Match6, APIName7, APIAmts7, APILevels7, FullVals7, Match7, APIName8, APIAmts8, APILevels8,
[Code] ......
When I try to open a recordset based on this sql, it gives me the runtime error - which is odd since I don't have any criteria in the statement.
I think the problem may be that vba is somehow adding a line break between "fullvals" and "18", but I don't know why it would do so and it doesn't always (only if the string is long).
View 9 Replies
View Related
Aug 11, 2014
I am getting Run-time error '3464': Data type mismatch in criteria expression when i execute the code:
Option Compare Database
Dim rst As DAO.Recordset
Dim rst1 As DAO.Recordset
Public verificacoes As Boolean
[code]....
View 5 Replies
View Related
Oct 29, 2013
I have two tables in a query joined by a ID field. The problem is in the one table the ID fiels is a text format and in the other table its a number format so the query builder doesnt like that and gives me the Type mismatch in expression error.
There's no way around it though; i need it to be those formats in its respective tables for reasons i wont go into here for simplicity.
View 2 Replies
View Related
Jun 15, 2015
I'm having an issue with the database being read only and a type mismatch due to OpenRecordset. I know this database use to work when it when it was just
CurrentSerNum = RecSet(0) +1 was doing the incrementing.
I need the database to increment in a different way now.
Q=manufacture location
1st number is new=0 or used=1
2nd and third number =82
4th is single digit year aka 2015 = 5
6 and 7th are work week aka 25 for this week
8,9,10 are incremental numbers for the units made that workweek, so 001,002,003.
Then week 26 starts the increment starts back at 001.
Code:
Private Sub MakeThoseProducts_Click()
On Error GoTo Err_MakeThoseProducts_Click
Dim NumericSerial As Double
Dim WorkWeek As String
Dim WorkYear As String
Dim WorkWeekNumber As Integer
Dim WorkYearNumber As Integer
Dim Location As String
[Code] ....
View 14 Replies
View Related
May 20, 2015
I have a button that opens a report. The code behind the button builds the filter criteria for the report based on some selections in a list box.
Code:
DoCmd.openReport "Report", acViewPreview, "", GetCriteria
For VarItem = 0 To Me.List2.listcount - 1
strCriteria = strCriteria & "([ProjectNo]= '" & Me.List2.Column(1, VarItem) & "' And [ClientID] = " & Me.List2.Column(0, VarItem) & ") Or "
Next VarItem
If strCriteria <> "" Then
strCriteria = Left(strCriteria, Len(strCriteria) - 4)
Else
strCriteria = "True"
End If
GetCriteria = strCriteria
This is what the filter would look like with values after running the report (taken from filter bar in report properties):
([ProjectNo]= '150002' And [ClientID] = 206) Or ([ProjectNo]= '150003' And [ClientID] = 79)
Problem is that i only get records for ([ProjectNo]= '150002' And [ClientID] = 206). I this seems only filter ONE set of criteria ignoring all the others. What am i doing wrong?
View 5 Replies
View Related
Jun 6, 2013
Is it possible to generate a report from 2 listboxes?
I have attached a pic of what I am trying to accomplish. I am wanting to have a report open with only the criteria that a user selects from the listboxes.
listbox 1: User selects a case number(s)
listbox 2: User selects the fields they would like in the report
So, if the user selects:
Case number: 13-001
Then selects fields:
Allegation
Incident date
Focus_Last name
This report would be:
Code:
Case Number Allegation Incident Date Focus_Last Name
13-001 DUI 06/01/2013 Doe
View 5 Replies
View Related
Oct 21, 2005
Hi
I posted this on the end of the audit trail thread but nobody was really looking at it. I have used the script for the audit trail, and when I start changing any of the records, it comes up with the error:
13 - Type Mismatch
When I ctrl - break, and debug, it highlights the last line of the script:
On Error GoTo Form_BeforeUpdate_Err
Call Audit_Trail(Me)
Form_BeforeUpdate_Exit:
Exit Sub
Form_BeforeUpdate_Err:
MsgBox Err.Number & " - " & Err.Description
Resume Form_BeforeUpdate_Exit
Anyone any ideas on what is happening?
View 6 Replies
View Related
Nov 8, 2006
Hi all,
I have a problem with the following piece of code:
Private Sub cmdCautare_Click()
Dim strSQL As String, strOrder As String, strWhere As String
'Select Case Me.cmbTipVersus
'Case 1
'If Me.cmbTipVersus = "" Then
strSQL = "SELECT tblDosare.DosarID, tblDosare.DenumireDosar, tblDosare.CodDosar, tblDosare.DataDosar, tblInstante.Localitate, tblStadiu.Data, tblStadiu.Stadiu FROM tblInstante INNER JOIN (tblDosare LEFT JOIN tblStadiu ON tblDosare.DosarID = tblStadiu.Dosar) ON tblInstante.InstantaID = tblDosare.Instanta"
strWhere = "WHERE"
strOrder = "ORDER BY DosarID"
If IsNull(Me.txtDenumire) Or Me.txtDenumire = "" Then
Else
strWhere = strWhere & "(DenumireDosar) Like '*" & Me.txtDenumire & "*'"
End If
If IsNull(Me.cmbStadiu) Or Me.cmbStadiu = "" Then
Else
strWhere = strWhere & "(DenumireDosar) Like '" & Me.txtDenumire & "*' & " And " & (Stadiu) Like '" & Me.cmbStadiu & "*'"
End If
DoCmd.OpenForm "frmRezultateCautare", acNormal
Forms!frmRezultateCautare!lstRezultate.RowSource = strSQL & " " & strWhere & "" & strOrder
'End If
'End Select
End Sub
And on this line strWhere = strWhere & "(DenumireDosar) Like '" & Me.txtDenumire & "*' & " And " & (Stadiu) Like '" & Me.cmbStadiu & "*'"
i have an error message type mismatch. If i do the search only with the first text box the code works hjust fine but if i make the search w.r. with the second control (combo box cmbStadiu) the error appears. If anyone can help i will appreciate it.
Thank you all!
View 4 Replies
View Related
Sep 13, 2004
I am persistently getting the "Error Number:13; Type Mismatch" with the code below.
Any help is greatly appreciated...
BTW, in the SQL string, i will like to have the wildcard as "*" but the VB Editor automatically changes it to " * "... can that be a problem??
Code:
Dim db As DAO.database
Dim qdf As DAO.QueryDef
Dim sqlsearch As String
Set db = CurrentDb
If Not QueryExists("Q_Paint") Then
Set qdf = db.CreateQueryDef("Q_Paint")
Else
Set qdf = db.QueryDefs("Q_Paint")
End If
sqlsearch = "SELECT M_Paint.* From M_Paint " & _
"WHERE M_Paint.Color_Number = '" * " & "Me.txb_pcn_colornumber" & " * "';"
qdf.SQL = sqlsearch
DoCmd.OpenForm "F_Display_Paint"
DoCmd.Close acForm, "F_Paint_Catcodesearch"
DoCmd.Close acForm, "F_Search_Paint"
View 2 Replies
View Related