With below codes I am able to export recordset data to specified excel range if recordset count is 25. But I am unable to export the data greater than 25 to 2 specified range.
View RepliesI am trying to connect to excel from Access database. Once I make the connection I want to delete data from a range on a specific sheet. There are 4 columns on the spreadsheet but i wouldn't know how many rows. So for example, A150... but I may not know what the last row is. How would I be able to delete data from a range of columns to the last row?
View 4 Replies View RelatedSo I press a button on my Form1 and my tbl_customers table is exported onto a specific sheet in a templated Excel file "customer-template" that I have created.
This file has formulas on another sheet that based on the imported data.
The file is then saved to a specific location C:AccessCustomersHistory with the file name based on a date that was criteria from my original form E.g. "customers 11-02-15"
I am trying to write code in an excel worksheet to try to export excel data to a table in access.
The range in which the data is situated in excel varies. So the range address varies with the data. After a lot of searching I wrote the following code which works for a range which is fixed. The code is the following:
Dim acc As New Access.Application
Range(Range("b22"), Range("b22").End(xlDown)).Select
ActiveWorkbook.Names.Add Name:="ghazla", RefersTo:=Selection
acc.OpenCurrentDatabase "D:PayRollFactoryJasminePayroll.accdb"
acc.DoCmd.TransferSpreadsheet _
[Code] .....
As one can see from the first two lines of code I am trying to first delineate the range and then to name it. The intent is to name the range "ghazla" and so to cater for the fact that the extent of data varies.
The code works with the fixed range ="Sheet2$B140". However what I need to do is to adjust the code so that I can insert "ghazla" as the range name so that this can vary.
I am writing the following code that will first of all display column headers dynamically using "Headers" field data from Access table and then find out the sum(volume) using column header and first column values. The following code works fine to display headers dynamically in Excelsheet from Access table but doesn't display sum(volume) in all the corresponding cells. As I can't attach the Access table so I have stored data from Access table to sheet named "Access Data" as attached. The sheet2 named "Report" should populate total volume .
Code:
Public Function Inputdata()
Dim cn As ADODB.Connection
Dim rs As ADODB.Recordset
Dim r As Long
Dim i As Integer
[code]...
I have an access table and I want the code that will check two columns in the table "EnvelopeType" and "EnvelopeSize" and create headers in Excelsheet automatically. In the attached workbook, like in sheet1 the headers are already appeared, I want this to be done dynamically using vba code so that if new values get inserted in EnvelopeType and EnvelopeSize then we won't have to change the code to display more headers.
Please see attached workbook named Sample and Access table. E.g.
EnvelopeType EnvelopeSize
TNT 2nd Class C5
PP1 2nd Class C5
PPI 1st Class A4
Recorded A4
TNT 2nd Class C5
PP1 2nd Class C5
Recorded A4
PPI 1st Class A4
Recorded C5
With the code it should display following headers in excel sheet:
TNT 2nd Class C5
PP1 2nd Class C5
PPI 1st Class A4
Recorded A4
Recorded C5
I have a form where when the user clicks on the browse button then excel workbook filepath gets stored in the textbox as below:
Code:
Private Sub CommandButton1_Click()
ChooseFile
End Sub
Sub ChooseFile()
Dim fd As FileDialog
Set fd = Application.FileDialog(msoFileDialogFilePicker)
[Code] .....
Please see attached the excel workbook. Everytime the user will select Excel workbook using Browse button. Now in that file , the first sheetname will always be "Summary". I want to perform the following steps:
1. So now I want VBA code to copy the data from columns "Withdrawn","Obsolete","Updated","LitRef" from Summary sheet to the Access table named tblSummary.
2. When the data gets copied in Access table then write So VBA code that will check if the data in field LitRef in table "tblSummary" is present in field "Reference" of Access table "tblliterature" . if its present then check in the tblSummary , which corresponding fields out of "Withdrawn","Obsolete" and "Updated" stores "Y" .
3. If "Withdrawn" field value is "Y" then change the status of corresponding record of tblliteraure to "Withdrawn"
4. If "Obsolete" field value is "Y" then change the status of corresponding record of tblliteraure to "Obsolete"
5. If "Updated" field value is "Y" then change the status of corresponding record of tblliteraure to "Updated" .
I have a main form with two subforms. I'm trying to get my code so that it allows me to put 1 subform on one tab and the other spreadsheet on the other tab.Heres my code:
Code:
Option Compare Database
Public Function Send2Excel(frm As Form, Optional strSheetName As String)
' frm is the name of the form you want to send to Excel
' strSheetName is the name of the sheet you want to name it to
[code]...
It won't let me pass more than one subform when I call Send2Excel, so I have to list it twice, which opens two excel files.
See attached the Workbook. I need to check the policy Numbers in Column A of all the sheets in the attached workbook if its present in Access Table. If yes then write the corresponding ScanDate and BatchNo from Access table to columns I and J of all the sheets. I need to write VBA code to perform it.
In the attached workook, only Sheet1 contains the data but in actual there will be data in 5 sheets in the workbook.
I have a table (tblMaster). In the table is a field called Agency. The table is 200,000+ records and there are around 35 Agencies. The table grows monthly, with potentially new Agencies added all the time.
What I have been asked to do is to have a button on a Form which, when clicked, exports to Excel a separate workbook with all the table data for each Agency in the table.
I have suggested a combo-box on the Form that passes the Agency name to a query and then exports (so they could have control of which Agency to export) but no - they just want one click, spool through the table and create the 35 (or so) exports.
How to export ms access table into excel workbook with separate sheet based on a value of field?
For Example:
I have One Table with three fields
Name Address Company
Steve a Apple
John b Apple
Josh c Dell
Pete d Dell
Pat e HP
Jacob f HP
Output in Excel(list for Employee by company):
Sheet 1 Sheet 2 Sheet 3
Apple Dell HP
Name Address Name Address Name Address
Steve a Josh c Pat e
John b Pete d Jacob f
I have an access query with around 10 columns. One of the columns is city. There are total of 5 unique cities. I need a macro for the button in the access report that will export the data from the access query to the ONE excel workbook in such a way that each city filtered data from access is exported to city name worksheet. So Excel file would have in total of 5 worksheets with the relevant city data.
View 2 Replies View RelatedI have a Listbox named List5 and a search textbox named txtProperty and a table name sms , after i search in textbox the results in listbox . i would link to inport the results in listbox to excel but the code i have export the whole table to excel .
here is my code
''''''''*''''''''*''''''''*''''''''*''''''''*''''' '''*''''''''*''''''''*'
''''''''*''''''''*'''''''' BUTTON 3 ''''''''*''''''''*''''''''*'''''''
''' EXPORT THE LIST TO EXCEL AS List5.XLS ''''''''*''''''''*''
''''''''*''''''''*''''''''*''''''''*''''''''*''''' '''*''''''''*''''''''*'
''''''''*''''''''*''''''''*''''''''*''''''''*''''' '''*''''''''*''''''''*'
Dim outputFileName As String
Dim oXL As Object
Dim oExcel As Object
Dim sFullPath As String
Dim sPath As String
outputFileName = CurrentProject.Path & "List5.xls"
[Code] ....
I'm trying to subtotal data in an excel file but I am getting a subtotal method of Range class failed in the red text below. I have been trying to get this to work with no success.
Code:
Public Function SUMMARY()
Dim xlApp As Object
Set xlApp = CreateObject("Excel.Application")
With xlApp
Dim wb As Object
[Code] .....
I am trying to run this recordset with parameter query and export to excel. Problem I am getting is it is sending the ID of employee name and exporting row wise instead of column wise.
Code:
Dim dbMyDatabase As DAO.Database
Dim rsMyRecords1 As DAO.Recordset
Dim qdMyParameters1 As DAO.QueryDef
Dim iIndex As Integer
Dim iFound As Integer
Dim oExcel As New Excel.Application
[Code] ....
i have the following code and it runs without error but when i want to open excel file, i have the following message and i can't open it.
DoCmd.TransferSpreadsheet acExport, acSpreadsheetTypeExcel12, "tbl_userinformation", "G:Rasteh MonaName.xlsx", True
how to grab the recordset after a user has filtered a datasheet and export it to EXCEL with VBA from a Button on a form.
I've figured out how to export a pre-defined query to excel with all the fields I need. I was hoping to be able to grab the filters from the datasheet form and pass them to the query.
I have a main form with a bound Datasheet subform. The export button is on the main form and I need to grab the filtered data from the datahsheet subform.
I have a button on a access database form that runs a query and exports the data to an excel sheet that remains open. I am ok with this. What I would like to do now is format the sheet and then save it as a file name that is the same as the query name but adding the date at the end. Here is what I have so far:
Private Sub Command1_Click()
On Error GoTo Err_Command1_Click
Dim stDocName As String
stDocName = "Qry_SentForProcessing"
DoCmd.OpenQuery stDocName, acNormal, acEdit
DoCmd.RunSavedImportExport "Export-Qry_SentForProcessing"
[code]....
I just want to add the code to this button. Or do I need to write a function as a module, then call the function after the export is run.
My database only has one table of data so it's not complicated.I would like to create a form that can create customisable Excel exports of the data based on set conditions and exporting only select fields. URL...I have one table of data (tblCustomers) which contains all of the fields in the box above.
I would like export the data from the table to excel showing only the fields that are ticked in the box (frmCustomReport).The check boxes are named chk then whatever the field name is eg. chkLocation, chkStatus. The labels are the names of the fields in tblCustomers. Is there a way to do this in SQL or VBA?
I have a question about the best way to go about linking an excel workbook to an ms access table? I have researched hyperlinks and attachments and ole objects and I am not sure what is the best option. I believe hyperlinks will be best, because the attachments will bloat the database, but I am not sure how to go about doing that in vba? My process is such:
1)Users enter project information
2)Users enter the sample information for each project
3)The project and sample information is combined by a query
4)The user clicks a button to print forms, which runs the query and opens an excel workbook template.
5)The data is exported to a specific sheet in the workbook
6)Using vba in excel, the data is used to populate cells in different sheets depending on critera.
After all of this is accomplished, I need the user to SAVE AS the excel workbook and it needs to be "attached" to the ms access 'project' table. I am not sure what is the best way to link this back to the database. I would like to automate it with vba if possible.
find a way to automatically copy data from an access query to a sheet in excel at the end of every month we record financial data from our database into an excel sheet for our accountants. im still designing the query to format the data exactly the way we need it, which is why im not too clear on all the details (have a meeting with the accountants on wednesday to confirm everything, but im hoping to get most of the function written by then at least)
Ive already got the pathfilename and worksheet name stored in variables (excelFile and workSheet respectively) and ive worked out a way to store the row number (in a variable called simply rowNum), i just need to add one record to that specific row, from columns B to I) and for now lets just assume the query would be qryFinancialData. simple way to export the data, ill be formatting the query so that the first field in the query will go into column B, second field will be C, third field will be D, etc.is there a quick way to open the file, add the data to the right columns/row and close/save the excel file, all through VBA?
I need to export multiple queries into a single spreadsheet in different range of cells. Means one query need to be exported from B2:E2 and second query need to be exported from B10:E10. In this way need to export 18 queries' result into one sheet only on different name range.
I am using Access 2007 and need to export data into Excel 2003 format.
I have got the following code
On Error GoTo ErrorHandler
Dim exApp As Excel.Application
Dim exDoc As Excel.Workbook
Dim exSheet As Excel.Worksheet
Dim Dateiname As String
Dim SQL As String
[Code] ....
I'll get the following error:
error message 1004: can not give a sheet, the same name of the sheet
I have a query, which looks like that:
ID Year SAP Geris
1 2008 20,00 € 5,00 €
1 2009 40,00 € 4,00 €
1 2010 60,00 € 6,00 €
2 2007 80,00 € 4,00 €
2 2008 100,00 € 8,00 €
2 2009 100,00 € 4,00 €
3 2008 1.000,00 € 1,00 €
3 2009 100,00 € 8,00 €
3 2010 2,00 € 9,00 €
4 2008 9,00 € 10,00€
So each combination has an ID. It's called the SuWID. I want to Transfer the data to a fixed Excel sheet. I wrote the following code
Dim xlApp As Object ' Excel.Application
Dim xlBook As Object ' Excel.Workbook
Dim xlSheet As Object ' Excel.Worksheet
Dim rst As DAO.Recordset
Set xlApp = CreateObject("Excel.Application")
xlApp.Visible = True
[Code] ....
The only Thing what i still want to have is that, before it opens the Excel form, which works already perfectly well, that a msgbox will Show up and ask me, which SuWID do you want to see in the Excel sheet.
I am looking to export my listbox values to a single workbook BUT a new sheet is created per export. There are 6 listboxes in total and I already have the code to export a single listbox but if I try to use this code its going to overwrite the csv each time .
Code:
Dim i As Integer
Dim n As Integer
Dim strLine As String
Set fs = CreateObject("Scripting.FileSystemObject")
Set a = fs.CreateTextFile("D:DatabaseHomeExportCombinedHrs.csv", True)
[Code] ....
Hi all. I have an excel spreadsheet that pulls company information off of our internal system that is linked to an access database table (let's call it "General"). The General information is current and is updated within our internal system (but through the Access side will not need to be updated), however, I have a separate table (let's call it "Detail") that has information (employment, revenue numbers) that I want users to input through access. The two tables are joined through a relationship, however, b/c General is a linked table I am a) unable to assign a primary key and b) unable to edit the Detail information in a form view. I know this is related to Microsoft's limitation on excel linked table, but I was wondering if there is a way around it besides copying the General data into an access table. Would be grateful for any help!
View 2 Replies View Related