Modules & VBA :: Unable To Get The Public Variable To Work
Mar 27, 2015
I have a module that has a global variable defined as shown below
Module: initGlobals
-----------------------
Code:
Option Compare Database
Option Explicit
Public strGlobalUserId As String
Sub initvar()
strGlobalUserId = "Myuserid"
End Sub
This is invoked in a login form("frmLogin") and it displays the above value before I replace it with the one that is accepted in the form.
Here is the code from the login form
Code:
strGlobalUserId = Me.cboEmployee.Value
When the password is successful, I close the login form and open a form called "frmMainForm". In the form_open event of the "frmMainForm", I am trying to display the user id using strGlobalUserId but it just has spaces. What am I doing wrong?
Code: Select distinct [tbl_DTP/CTP].id_zlecenia, [tbl_DTP/CTP].Folia_na_lakier_UV, [tbl_DTP/CTP].Wykrojnik, [tbl_DTP/CTP].Makieta, [tbl_DTP/CTP].Matryca_do_tloczenia, [tbl_DTP/CTP].Matryca_do_zlocenia, [tbl_DTP/CTP].kalka, tblGoraZleceniaRoboczeLaczenie.NumerZlecenia from [tbl_DTP/CTP] inner join tblGoraZleceniaRoboczeLaczenie on [tbl_DTP/CTP].id_zlecenia = tblGoraZleceniaRoboczeLaczenie.NumerZlecenia where tblGoraZleceniaRoboczeLaczenie.NumerZlecenia = r1;
Where "r1" is a public variable as string.The variable has value e.g. "10/145" But query can't get this value and all the time ask about value from "r1" :/
Is it possible to open another database, set a Public boolean variable in a module?
in db1: Open database by Access.Application, OpenCurrentDatabase, setting obj to db2.CurrentProject, loop through main objects
in db2: Public ByPassCloseVar As Boolean is in a module ModLinkTblReview
I have a process that opens up a database runs through all of its objects to get their properties and values. There is a form that is set up on Unload to close the tool if the variable is set to False. When I open the form to get the properties and their values, then close the form, it closes the database. I would like to set the variable to true in order for the database to stay open.
Thought something like this would work: db2.Modules!ModLinkTblReview.ByPassCloseVar = True
Indicates that method or data member does not exist.
I have a backup subroutine which automatically triggers when the front-end is closed down (it just takes the back-end, makes a copy and compacts it).It's driven off a hidden form which I use to track who is connected to the BE at any given time. This form is opened as part of the AutoExec when the FE is opened and writes some basic user info to a table. When the form is closed, it updates the table and fires the backup process before quitting Access.
Part of that user tracking process checks to see if the same user is already connected - either elsewhere (i.e. on a different machine) or on the same machine (i.e. opening a second instance of the same FE) - which is undesirable (and, frankly, unlikely, but not impossible) A brief prompt appears to explain that they can only be connected once, at which point the application is quit (to enforce the rule) This also works fine.
I would add a public boolean variable, set it to True by default, then switch it to False if the same user is already logged on before quitting Access.Trouble is, the variable doesn't seem to be holding its value? Here is the Load event for the tracking form :
Code: Private Sub Form_Load()
On Error GoTo ErrorHandler
Dim dbs As Database Dim rst As Recordset Dim strSQL As String Call InterfaceInitialise blnPerformBackup = True
[code]...
For some reason, blnPerformBackup is False every time, even though I set it to True at the very start of the Load event (and it is a Public variable, defined in a separate module where I store all my Public constants and variables)
why it is not retaining its value from the Load event? I've checked and it does get set to True - and when I debug, it remains True - but at runtime it reverts back to False by the time it reaches the decision whether to backup or not?
Question for Documentation purpose: Should the Public Type be declared in its own module?
Or should it be declared in a standard module where non-public functions use it? It is not for a Form module use.
For a Rule Engine, a function is calling one record on 4 different SQL Views (as linked tables) that have the same field format.
For speed, the recordset should only be opened once. However, there are multiple values that must be returned to the result table multiple fields.
One way to return multiple values is an Array. That has over head too.
Another way is to create multiple public variables. Not my choice for documentation. Another is to create a string.
This is a pure code module with several non public functions / subs. What is the documentation preference? List a Public Type close to the function, or place it in the Global module?
Background: A function can only have one return value.
By creating a public Type, multiple values can be returned.
Code: Public Type Income Wages As Currency Dividends As Currency Other As Currency Total As Currency End Type
Use this structure as the return type for a function. In a real situation, the function would look up your database tables to get the values, but the return values would be assigned like this:
Code: Function GetIncome() As Income GetIncome.Wages = 950 GetIncome.Dividends = 570 GetIncome.Other = 52 GetIncome.Total = GetIncome.Wages + GetIncome.Dividends + GetIncome.Other End Function
To use the function, you could type into the Immediate Window:
GetIncome().Wages
(Note: the use of "Public" in the Type declaration gives it sufficient scope.)
Important Notice The way this function is called will work, but is wrong from the aspect it re-calls the recordset over and over.
I've got a private sub that runs when the form loads. I want it to get the id of the record which has opened this new form.
The public sub populates the variable but it's Empty going back into my private sub. I'm sure its a simple school boy error but it has me stumped!
I want it public as I need to keep that id as new records are added in the form.
Private Sub Form_Load() FRStudentFundingRequestID 'fundingrequest = FundinRequestID Me.txtFKFReq = FundingRequest End Sub __________________________________ Public Sub FRStudentFundingRequestID() FundingRequest = [Forms]![frmFundingRequest]![txtpk] End Sub
I am using a public function to feed a variable string to a query. So far I have got:
Code: Public Function ClientStreetModule(firstLVar As Variant, streetVar As Variant, newFL As Variant) As String Dim cslStr1 As String, newStreet As String newStreet = Right(streetVar, Len(streetVar) - Len(newFL))
[code]....
However, I only need to use newStreet as the true part of iif, in which instance all are longer. At least I think this is the problem. I realise I might need to use NZ but am not sure how. Why it is evaluating and giving errors for all records and not just when the iif criteria is true as I want it to?
I am working on a database where I want some specific information displayed on a form, preferably on the form header. I want to display this on all of my forms. In a standard module, I have a code segment that runs a query returning values, and I assign those values to my public variables. I run this code segment triggered by "on activate" of each form.
The variables contain an Event Date, and an Event Name. I want this information to appear on each form. How do I get this data onto my form as part of the form header, or if cannot put on header section, then in the detail section?
I have a form (Datasheet). I need to define some variable in form as string, which can work with any event. E.G in column "A"on event after update, in column "B" on event after update...
I will try to explain with a simple example : form (datasheet) columns: "A", "B"
on event after update in coulmn "A", I could have some like this: (variable what I need to define) = 3
on event after update in coulmn "B", I could have some like this: If (variable what I need to define) = 3 then msgbox "ok" end if
Now I try to work around the problem and use another column "c" to keep the value from after update A - but I know that, it's bad solution -Right?
Error 91 - Object variable or With block variable not set
I am getting this error telling me that an object variable is not set.
I know which variable it is but when I step through the debugger it sets the variable and all is fine? Issue is that public variable of a class is not getting set when the VBA Editor is not open?
This code runs fine the FIRST time, however trows up a message the SECOND time it is run.
The error is on the line ".Range"
I am trying to sort records which have been exported to Excel.
Dim LR As Integer LR = 5 Set xlApp = CreateObject("Excel.Application") xlApp.Visible = True Set wbRef = xlApp.Workbooks.Add With wbRef
wbRef.Activate .Worksheets("Sheet1").Activate With ActiveSheet .Range("A2", .Cells(LR, "O").End(xlUp)).Sort Key1:=.Range("C2"), Order1:=xlAscending, Header:=xlYes End With end With
I am trying to read the value of a control on an open form from a Public Function in a Module with no luck. I suspect the issue is syntax.
Code:
Public Function MyFunction(varFormName As String, varControlName As String) If Forms(varFormName).Controls(varControlName) = True Then ' = 0 even when control is -1 Else End If End Function
The variables pass through fine but the If statement equals zero regardless of the state of the form's control. I tried several variations to no avail.
If Forms(varFormName).Form.Controls(varContactControl ) = True Then If Forms(varFormName)!Form.Controls(varContactControl ) = True Then Etc.
I have an issue with this case select below. The DelayStart is time so lets say I put in the debug window
?DatePart("h", #04:00pm#)
The result would be 16 which is correct BUT the issue is my second shift starts at 04:01pm and the result is still 16 untill 5pm. How do I fix this so I get the correct shifts? Im guesing use something other than DatePart but what?
Code: Public Function getShiftForRecord(DelayStart As Variant) On Error Resume Next Select Case DatePart("h", DelayStart) Case 6 To 16 'Daylight 6:00am - 4:00pm
I have built an access application that contains a set of buttons along the top of every form that serve as navigation.* These buttons each perform the same function on every form they are on. (menu opens the main menu, etc) I have database macros to assign each button the same function but I still have to go through each form and manually assign them. I was wondering if it was possible to define a public function that on db open will look for all buttons with a certain name and assign them the macro. (so all buttons called cmdmainmenu will have the OpenMainMenu macro assigned and so on).Before you go there, I have already tried the navigation form and set all forms as subforms.
Is there any way of opening recordsets as public or global in a form? E.g. if i do something like
Set rs = db.OpenRecordset("TblCustomers", dbOpenSnapshot, dbReadOnly)
the variable rs should be available in all the private sub i have on that form, and i should be able to access records without opening database/ record sets for individual subs.
I want this function to populate value from a any field selected from any table to any text box in any form ...... Lets say in a Database named TestDB we have a Table named tblTest , a Form named frmTest and in this form( frmTest ) we have one Bound Combo Box named cmbTest and one unbound TextBox named txtTest
We assume that the table tblTest has three fields : TestID , FName and LName .
We also assume that there are already some records in the Table tblTest .
If the function F() is already programmed it should take as arguments as it follows :
F(FormName as??? ,ControlName as ???, TableName as ???, FieldName as ???, ID_Field_Name_of_the_Table as ???, Combo_box_selected_ID as ???)
In result the function should (probably) DLookup (FieldName , TableName , ID_Field_Name_of_the_Table = Combo_box_selected_ID ) and then store the value in a variable ( probably Variant ???) , lets say called varSetValue.
The problem is IF this is the correct way to handle that issue , than what should i do next.... I really don't know how to pass a Control's name to a function from the Event module of the ComboBox -
I mean - how can I obtain the value so it is usable for the function .... What data type should be the function arguments so I can use them to set a value for a control in any form .
In example : If the Dlookup() is somehow successfull then I want to assign the varSetValue to the txtTest what should I do : FormName.ControlName.Value = varSetValue >??????
I have read a lot materials but couldn't find a good answer for that , and aswell what data type should be the arguments that the function accepts and how do I obtain Controls and Forms names so I could use them in the function as described above .
I would like to declare Global or Public variables from a table so they can be added to or edited easily. I had the following function to do this with Alpha Five but at the moment my lack of knowledge of Access VBA is making this task difficult.
Here is the function that I use in Alpha:
FUNCTION udVars AS A (udTabName AS C ) dim codeStr as c t=table.open_session(udTabName,file_ro_shared) t.fetch_first() while .not. t.fetch_eof()
[Code] ....
It opens a table reads in the records and then makes them into a string the string would look something like this:
"Public EuroRate as Single = 0.885"
I would then need to use this string to declare the variables but not sure what command to use - I was looking at the Eval function last night but couldn't get this to work...
The table would hold strings for all the above so you would have:
My_Var (variable name) My_Typ (type of variable e.g. Single) My_Val (value e.g. 0.885)
The table would hold as many variables as required, some would be dates, some paths for making directories and some would be numbers.
I have the following function that I found online. Unfortunately I can't remember where I got it since I've had it for a little while. Today, when I tried to actually put it to use it didn't work.
I'm calling it from a form as follows: CompactDB (tblHotword)
tblHotword is just a random table from the back end. My understanding of the function was that it would use that table to connect and get the file name of the back end.
Whenever I run it, Access pops up a window that says "Object required" and nothing else. It doesn't look like a standard error message popup. When I click 'OK', Access continues with the rest of the code as if nothing went wrong. The function doesn't run though.
Code: Public Function CompactDB(TableName As String) As Boolean On Error GoTo Err_CompactDB Dim stFileName DoCmd.Hourglass True stFileName = db.TableDefs(TableName).Connect
I have multiple reports that use similar IIF statements as the controlsource for four textboxes. Naturally, I don't want to have to update twelve controlsources if any of the calculations change, so I thought I'd make this a public function. However, I don't know how to pass along multiple textboxes as variables. Here's what I have so far:
Code: Option Compare Database Public Function txtColor(ByRef textbox As Control) Dim str1, str2, str3, str4 As String 'The IIf statement is simplified for this example. It's not important. str1 = "=IIf(IsNull([Inquiry start date]),'W',IIf([txtInquiry]<1 And IsNull([Inquiry end date]),'R'))"
[Code] ....
And this is in the report (where ??? is what I'm asking about)
Code: Private Sub Report_Load() Call txtColor(???) End Sub
I have a table with only two fields and one record: BegDate and EndDate (beginning and end date of the reporting period respectively). I also made a function with variables that look up those values for use as a date parameter in a query.
Here is the code:
Option Compare Database Option Explicit Public Function getCurrentRepDates() As Date Dim dtBegDate As Date dtBegDate = DLookup("BegDate", "tblCurrentRepDates")
[Code] ....
I am getting a syntax error for the line marked red. How can I use "Between" function in VBA code? Access 2010
I have created three forms using three tables tblUser, tlbMeasure and tblSubMeasure. The tblUser is linked to the tblMeasure table via UserLogin and tblMeasure is linked to tblSubMeasure via MeasureID. The forms are created with frmMainMeasure being the main form and frmMeasure6 a subform and frmSubMeasure a sub with frmMeasure6.
I want to be able to add sub measures that will be linked to each MeasureID and each MeasureID link to each user via UserloginID. The forms load the data in the sub forms but when I try to add sub measures using a button I added on the frmMeasures6. The button works when I try work on the form fine but when I try via the main form I am not able to add or view other records within the table.
When I click the Add button I want to be able to load back the same MeasureID number in fmrSubMeasure to ensure that it is linked to the same measure and the MeasureID is linked to the same UsrrLoginID.
The code is included below and I've attached the file as well.
Private Sub cmdAdd_Click() If Me!frmSubMeasure.Form.Dirty = False Then End If Me!frmSubMeasure.SetFocus DoCmd.GoToRecord , , acNewRec
I am working with two forms frmManager and frmMMeasures where based on selection from the combo box of frmManager of the department, position and staff member frmMMeasures is loaded where MUserLoginID and MPositionName is populated based on selection from frmManager. This is what I use to populate the MUserLoginID field for the control source " =[Forms]![frmManagers]![cboStaff] ".
My problem is when I go to the next record on the form those two fields do not change from what was picked up from the form frmManager.
I don't know how to ensure that the correct data is displayed.
