I've tried using the vba to have unbound forms information pasted to a table. The Vendor, Channel and Department are unbound fields in the form and I can't, for the life of me, figure out how to get them to append to the table.
I've tried using solutions provided prior but I must be missing something. Here's my database. I'd like for it to append to the table then ready the form for the next entry.
In a Form I have a ComboBox set with a Control Source and Row Source.
I have several Unbound Text Boxes set to autopopulate based on the ComboBox selection.
I have two related (I think) issues:
One: Every time I open the form the Text Boxes are blank until I select an option from the Combo Box.
Two: If I make a selection in one record then move to another record, the information from the original record is still showing.
So I have this code in an afterupdate event in an unbound text box to update the value of a table if the textbox is updated:
Code:
Private Sub txtCustRepID_AfterUpdate()
'Go to Calls table and find original value for CustRepID
'Fin the Call ID first
Dim CallIDVar As Long
Dim ContactIDVar As Long
Dim CustRepIDOr As String
CallIDVar = Forms![Contacts]![Call Listing Subform].Form![CallID]
[code]...
This code works well when entering numbers in the text box but it returns error 3061; "Too few parameters. Expected 1" when along with the numbers there is a letter in the textbox.The error happens in this part of the code:
Code:
'Accept change and add new value to table
CurrentDb.Execute _
"UPDATE Calls " & _
"SET CustRepID = " & CustRepIDNew & " " & _
"WHERE CallID = " & CallIDVar, dbFailOnError
The underlying table has text as type of data for this field.
New to access (and this forum) and working on a small db that includes the following tables:
tbl_Orders
tbl_Junction (Order Details)
tbl_Products
While the form itself is bound to tbl_Orders I decided to use unbound text boxes to enter the data (knowing I was in for some work!). Reason is that if textboxes were bound would need to use a subform with multiple combo boxes and that UI did not seem suitable for the application.
I’ve completed the code to add new records to tbl_Orders and tbl_Junction from the unbound textboxes. I'm using the VBA .AddNew method and is working well. Now I need to integrate code that will allow users to edit existing records while they are viewing them on the form.
I have the code to look up the record set I want to edit in tbl_Junction and am familiar with the .Edit method but the issue is that the required changes MAY include not just editing existing records but also deleting and adding new records. For example, the initial order may have been for Apples and Oranges and the revised order may change the number of Apples, eliminate Oranges entirely, and add some Bananas. So, it seems I need to .Edit Apples, .Delete Oranges, and .AddNew Bananas?
Should I try to write code to determine where I need to .Edit/.AddNew/.Delete? -- not looking forward to that. Thought maybe could delete the entire junction record set and then just .AddNew for everything per the revised order. That should work as the display on the form would be correct for the whole order. But maybe would cause a problem as would remove the FK in tbl_Junction that corresponds to the PK in tbl_Orders?
my database just records end of day sales figures which are entered though a form, after they are entered the total for the day is archived. However the problem i have is that the i need some way of clearing the input table with a command in the form.
View 2 Replies View RelatedI am working on a timesheet application which allows users to insert multiple timesheet entries in a grid style format. the first row is visible and to add another row users click on a command button which makes the next row of fields available and ready to fill in and so on and so forth. I need the fields to be unbound and then when the user clicks on a save button for example then it inserts those values into the relevant table. Table name is tbltimesheet, field names are id, companyname, project, activitydate, activityhours, activitynotes, username, userid
View 2 Replies View RelatedI have created a forum that all fields are unbound. On completing it is written to the table using a RunSQL command. This writes to the table with no problem but when it does so it is creating another entry with zero content. This is the save steps with open new form
Code:
Private Sub SaveRecordAddNew_Click()
Call PreSaveCheck
If Me.saveCheck = False Then
Exit Sub
Else
Call WriteToTable
[Code] .....
I want to know a way of populating unbound textboxes with data from a table without using the easy assigning data in the property of the box. I want it to be all done with code, which to me isnt a huge deal but I've yet to find answers on the web pertaining to this issue.
for example:
Say i was searching a primary key in one box and based on what ever is typed in i'd like it to populate the rest of the textboxes.
I have an unbound form in which a user enters data relating to a credit dispute, and when they hit the Save button I have a sub that is intended to insert that data into a table. This is a bit out of my comfort zone, so I found some code from another forum and adjusted it to my needs. However, I'm getting errors.
The table name is tbl_complaints. The fields from the form are:
txtAcctNumber
txtClient
txtEoscarType
txtEoscarControl
cboMethodReceipt
....
My code is below.
Private Sub cmdSave_Click()
Dim StrSql As String
On Error GoTo ErrorHandler
StrSql = "INSERT INTO tbl_complaints " _
& "(ACCT_NUMBER, CLIENT_NAME, EOSCAR_TYPE, EOSCAR_CONTROL_NUMBER, METHOD_OF_RECEIPT,
[Code] ....
The error I get is error number 3075, and it says I'm missing an operator in the section that references cboResponseType, but I can't seem to figure out what I'm missing. My head is spinning from staring at these parentheses and apostrophes for so long.
I am trying to use a Connection to an xlsx spredsheet to read in a table of information (the data is not a table, just laid out in a table, see attached, the one I am trying to load is xlsx not xls but I cannot for some reson upload the xlsx one on here)
I have the following declared:
Code:
Dim cn As ADODB.Connection
Dim rs As ADODB.Recordset
my connection string is:
Code:
strConnectionString = "Provider=Microsoft.ACE.OLEDB.12.0;Data Source=" & cstrFolder &
Chr(92) & tempSymbol & ".xlsx;Extended Properties='Excel 12.0 Xml;HDR=YES';"
I open the connection which works fine:
Code : cn.Open strConnectionString
Now here I hit the problem, I have the following SQL string:
Code : strSelect = "SELECT * from [table$]"
The spreadsheet contains just 1 tab, named table so I think I am referring to the data correctly in my SQL string?
When I open the recordet for variable rs using:
Code : rs.Open strSelect, cn, adOpenStatic, adLockOptimistic, adCmdText
I get the error dialogue box:
The Microsoft Access database engine could not find the object 'table$'. make sure the object exists and that you spell its name and the path name correctly.....
I did a Debug.print to check the strConnectionString was correct and the Source is exactly correct and refers to the name of the file I am trying to access exactly.
how to add recoreds in table thru form. There are 10 fields. first two are txt boxes and rest of are combo boxes. combo box are with drop down list. But they are unbound. two txtbox are auto filled by the username and empid. Now need to write the code to update these value to table. Just i wanna do ti thru vba coding only.
View 1 Replies View RelatedIs there a way to set up a keyword search within a form and use it to look up information in a backend table?
View 3 Replies View RelatedHow to do an UPDATE using VBA on a form to update a specific record on the table using an unbound field on the form to filter the update.
Every time the code runs, it tells me: Run-time error '3144': Syntax error in UPDATE statement and takes me to the "CurrentDb.Execute strSQL, dbFailOnError" line at the end of my sample below.
Here's my code:
Dim strSQL As String
Dim strCriteria As String
strSQL = ""
strSQL = strSQL & " UPDATE [tblTicket] SET"
strSQL = strSQL & " ([UpdatedBy], [AssignedTo], [Requestor], [Dept])"
strSQL = strSQL & " Values"
strSQL = strSQL & " ('" & unbEnteredBy & "','" & cmbAssignedTo & "','" & cmbRequestor & "','" & cmbDepartment & "')"
strSQL = strSQL & "Where [tblTicket]![DateTimeOpened] = #" & FORMS!frmTicketTracker.unbDateTimeOpened & "#;"
CurrentDb.Execute strSQL, dbFailOnError
May not be using the correct terminology here. I have a form that currently does not have a RecordSource. From this form, I want to create a table called "ICEA" with the following fields (which would be entered from the form): OperatingDay, Hour_Ending, Import, Export, and Net.Can this be done with a SELECT statement or does it have to be done through VBA?
View 4 Replies View RelatedWhen a user selects a name from a combo box then 11 textboxes are populated with personal information.
What I am looking for is when the user edits the persons information (i.e. changes the persons phone number to a different number), how do I update the table with this information?
Is there a way to only update fields that have changed? or do I have to save all textboxes?
I have read about an "Update Query" and a SQL Update, but I did not think the two applied. I am sure that I am wrong, lol.
I tried the "Docmd.Runcommand acCmdSave (in the OnClick event cmd button) but it did not make any changes to the table.
This is what I put in the OnClick event:
Code:
Private Sub cmdSaveEdit_Click()
DoCmd.RunCommand acCmdSave
TextBoxLockDown
Me.Requery
End Sub
How do you update table with unbound checkbox? I'd like to add basic yes/no, true/false on update. Currently I'm using a workaround like this
Code:
If Me.chkInkt = True Then
status = "true"
Else
status = "false"
End If
Which is ok if there's one of these, but sometimes I have more...
I have a form, which has a search box. This allows you to search through the id numbers of each record. Once an ID has been selected a bound textbox displays the id number. Other unbound textboxes then display other information from the table with the relevant record.
What I want to do is then allow users to change information in textboxes and update the record.
I have a user form that has many unbound controls that are used as calculated controls that lead up to an unbound control that is the grand total of all the data entered. I would like for the unbound grand total control to update the grand total field in the table where I would like to store the data..is there a way I can bind an unbound control to a field in a table?
View 1 Replies View RelatedI have a form with a field that has formula for calculation. However, I am unable to link the field to the table since the control source is my formula.How can I that field to a table?
View 5 Replies View RelatedI've established a many to many relationship using a junction table.
So I have 3 tables (A for "materials", B for "batches", and J for "junction")
Form A is linked to table A, and contains a subtable linked to a query from table J. This allows me to input materials into table A and then list all of the batches it may be used in that are in table B. I successfully got this to input all the batches and materials combinations in table J.
Now on form B, which is linked to table B, displays the batch information, with the subtable J.
My problem, is that only the materials primary key is showing, not the other information that should be linked from table A.
I have an after update event that populates, Date, Time and User into corresponding fields when the record status changes to closed.
However... Whilst the information is recorded on the form it does not record to the underlying table is there any reason for this, or anything that I am not doing correctly?
I have a form which has an unbound text field which is a calculated filed showing a date which is x months after a separate field on the form.
I need to write this field back to a table in the database when an "add" command button is clicked.
The table is called Assets
The form is called Assets List
The text field on the form is called txtWED and needs to be written back to the table "Assets" in the field "Warranty_End_Date"
If possible can I add this as an expression on an "add" command button?
I'm trying to build a form based on a table where the user can also enter data to update the table but with data fields not originally in the table. Below is a summary of what I have and what I need:
1.) A file that will be uploaded daily into a Table (ie name Denials extract table).
2.) A form bound to table Denials extract
3.) Additional fields that will be updated by users that is not included in this table b/c they are not available in the system we are getting the data extract from.
4.) The user will look up a key field that will allow them to review it in our system. Once they "work" the record, there will be multiple fields that they will update with this information that are not in the bound recordsource (table Denials extract).
Do I create another table with these fields even though they will be blank at first and make them a subform that will have a "primary key field" that will link the main form with the subform? Will they need to "update" a whole new table? Not really sure how that would work since they will be updating fields not in the bound table.
I have a form that contains a combo box (cboEmployeeName) that pulls data from a query and populates three text boxes (Work Area, Last Name, First Name), This part works fine. Because the text boxes are being populated by the Combo box, they are not bound to the record source tblTrainingSchedule). I need the info that is in the text boxes to populate the respective fields in the record source.
I tested by adding "=tblTrainingSchedule!WorkArea=[cboEmployeeName].Column(3)" (column 3 is the work area) to the "after update" control but it does not populate the data.
Any way to transfer the data in an unbound textbox into a separate table.
User enters an amount into a textbox2, and then it does some calculations that involves textbox1 and textbox2. Finally, textbox3 has the final answer. Can textbox3 overwrite textbox1's data on the table and on the form?
Also, is there an "auto date" feature in tables? If new data is put into tables, Today's date appears on the date column?
I have a form based on query. On form i am retrieving data from another table using DLookup in a unbound text box. So I want to save the result of DLookup function in another field/table on same form.
View 8 Replies View Related