Modules & VBA :: Update SQL Only Updating Field Value To 0
Nov 20, 2014
When I try to run a simple update query written in VBA I get no errors but the field that I am trying to update just gets a 0 instead of the appropriate ID that I am passing.
Code:
Function ExtractProjects()
On Error GoTo ErrHandler:
Dim db As Database, rs As DAO.Recordset, rs2 As DAO.Recordset, var() As Variant, i As Long, qdf As DAO.QueryDef, ii As Long
Set db = CurrentDb
[code]....
The funny thing is if I run the query itself it works by using a parameter query but when I try and run it like this all I get is 0's in the field that it's supposed to be updating.The field [(SDSK) Charges Master].PID properties are as followed and is a linked table:
Type: Integer
Indexed: Yes (Duplicates Allowed)
A debug.print of the results of the query trying to be ran is the follows:
Code:
UPDATE [(SDSK) Charges Master] SET [(SDSK) Charges Master].PID = 1 WHERE ((([(SDSK) Charges Master].[IBB Date]) Between #10/24/2014# And #11/19/2014#) AND (([(SDSK) Charges Master].[Charge Num]) Like '*BAA*' And ([(SDSK) Charges Master].[Charge Num]) Is Not Null));
As you can see it is providing a number to be set to but instead it just fills it in with a 0.
Any easiest solution so that After I Update the field called JobStatus in the subform, it changes the field called JobStatus in the main form to the value which was selected from the subform?.
I have imported 8000 records into a table called competency.
the table does not have the emp id, but needs it. I have a table called employee information which has the emp id as the primary key. I want to create a simple update query to copy the emp id (autonumbered primary key) field from the Employees table to the (now blank) emp id field in the competency table.
I created a query in design view, added the two tables included the fields from Competency, Emp ID, Last Name, First Name and in the update field for Emp id I added this "copy[tbEmployeeInformation].[empid]" In the criteria field of last name I typed a name and ran the query, it gave me the correct amount of records to update, but when I ran it, it gives the type conversion failure error. I checked the fields and they are the same in both tables (type, length, indexing)
Using Access 2010. Fairly new to automation and macros.I have two tables (tblProductReceived and tblBins) and a form (frmProductReceived).A field in tblBins corresponds to a location the bin is at (named BinLocationID) and the tblProductReceived table tracks product that a specific bin has received.
What I need is for the tblProductReceived field PRLocationID ([tblProductReceived].[PRLocationID]) to be automatically populated with where the bin is at ([tblBins].[BinLocationID]) when selecting a specific bin in the form (frmProductReceived).
I have 2 tables, "Counselors" and "Appeals". There are several names in the Counselor table but it is not a fixed number of names (rows) usually around 7. There is also some variable number of records in the Appeals table, could be 0, could be 50, depending on the day.
I need to, in a round robin fashion, assign the counselor names one by one to the records in the Appeals table. How to loop through the 2 tables and update the name field in the Appeals table with the name in the Counselor table.
InstalmentAmounts field is populated based on the results of PaymentMethod which is a combo box
Here is the current code
Select Case Me.Payment_Method.Value Case "Three post dated Cheques" 'If three payments by cheque Me.InstalmentAmounts.Value = Round(Me.Total.Value / 3, 2)
In some cases there will be a few pennies that the client "overpays" because the instalment amounts will not add up to the Total. I need to add up the TotalInstalmentPayments to find out what the client actually pays and then add the difference between TotalInstalmentPayments and Total to the OurFee field
So
Total = 500.00 Payment Method = 3 instalments so IstalmentAmounts = 166.67 (rounded) so client pays 500.01 so the 0.01 needs to add to the OurFee field.
I need to update a field with the contents of 2 other fields when exiting a record. The fields (ItemNo) and (LotID) need to create or update the field (LotCode).
i.e.: ItemID (GM-235), LotID (26) will result in LotCode (GM-235-26).
I currectly use a Update Query that uses the expression:
[products].[MasterPN] & "-" & [lotid] in the lotCode Field - "Update to".
Unfortunatly, I am using a button on my form that executes the query, but it updates all the records and although it runs very fast, I would rather have it perform this task automatically when I leave the record.
I have an access 2010 database with an initial form for user login. After selecting their login, users go to the main tabbed navigation form. On the first tab, I have form with a dashboard as a subform containing a field that says "Welcome" with the user's name (obtained from the login). My problem is, users have to click on the subform for the name field to update. How to have the name automatically populate when the login form closes.
I'm trying to update the account number via an input box with a do loop but I don't have the code right. The at the input box, the user will type in a 4-8 digit number and it will update all the account number fields in a table that are null.
I am trying to update a field with the result of what is in the field plus the contents of a unbound form field.
So if crm_order_det.Qty contained the number 5 and the form field (labelled qty) contained 7 I would like the field crm_order_det.Qty to end up with 12.
I'm trying to update some field value depending two string field using a function with if and case, function below:
Code: Private Function checkDATI(tipotransazione As String, tipovendita As String) As String Dim r As String r = "" If tipotransazione = "VENDITA" Then Select Case tipovendita
[code]...
And then when I call this function in a command button event as:
I have a main form and 2 subform. The first subform has a field for %. And the 2nd subform has series of checkbox (Checklist or error made by the student)
Because every checkbox will lower the mark from 100 to x points per checkbox.So, I want that, if the field is not set to 100 yet, then they will not be able to check any box in the subform.I tried, before update of the subform, etc, but none work properly.
My update statement is shown below. What this is to do is change the PGTIN record in PP TBL to the GTIN that is in the UPC TBL where the UPC Code on the form is the same as the UPC Code in the UPC TBL. I am getting the error message "can't find field..." I have double and triple checked the field names but cannot find my error. Both PGTIN and UPC Code are text fields.
I have a table 'table1' which has various field including an ID field and a yes/no field. I then have a form based on a query originally derived from data in the original table. The form provides a list with some ID's with a yes and some with a no.
I'm trying to write a button code to convert all the no's into yes' for those ID's picked out by the query.
I've searched lots of sites and get that I need to set recordsets for both table1 and the forms' query but all my efforts crash or give an error.
I am looking for the right way to say .." for each ID in form set the yes/no field corresponding to the same ID in table1 to yes"
I have a combo box in a sub form with three values, rate1, rate2, and rate3. I have another three fields in the sub form rate1, rate2, and rate3. The rates are dependent on the item. When I select the rate from the combo box I want a cost field to update on change to the relevant rate. I tried this to no avail:
How to do an UPDATE using VBA on a form to update a specific record on the table using an unbound field on the form to filter the update.
Every time the code runs, it tells me: Run-time error '3144': Syntax error in UPDATE statement and takes me to the "CurrentDb.Execute strSQL, dbFailOnError" line at the end of my sample below.
I created an update query that says it has successfully updated 600 records, but when you go into the table, it has not been updated. I am working with an .mde. Does that make a difference?
I first created a select query to find everyone in TX. Then I changed it to an update query to change all TX to CA. Since it did not update the table, I tried running the update query again and this time it says there are not records to update (since it uppposedly updated my 600 records).
I have one table, I want to update multiple fields in that Table with values.Currently I have on update query for each update.So for exampleRows: Commercial Quotes, Cover Notes, Personal QuotesWill have the values: Yes, No, Yes in them.I need to update those fields, if they say Yes to Commercial Quotes, Cover Notes or Personal Quotes depending on the field obviously. And blank them out if it says No.Currently I have 30+ different queries I have to click individually one after the other to update each row. I was wondering if theres a quicker way of doing this all in one hit.I have a tiny bit of SQL knowledge.So one of the queries I've figured out I've converted to SQL but again it only updates one instance...UPDATE Enabler_Data SET Enabler_Data.[Commercial Quotes] = "Commercial Quotes" WHERE (((Enabler_Data.[Commercial Quotes]) = "YES"));I tried whacking an OR replacing the ; and repeating that statment replacing Commercial Quotes with Cover Notes but it errored out on me.This is where I get completely stuck and my meagre knowledge fails me so any help would be useful.Thanks in advanceMatt
I have a form in which old customers can be edited and new customers can be added. Currently, to edit a customer, the user clicks in the "Last Name" field and then selects EDIT-FIND and types in the last name. The user will then cycle through all customers with that name to select the correct one. How do I allow a user to begin typing in the last name field and have the name appear? Is there an easier way to do this?
I am trying to implement an update query per the instructions at http://support.microsoft.com/default.aspx?scid=kb;en-us;127977 to append records from table2 to table1.
I would like to add a criteria here saying update (and append) only records that match the criteria table2.dateofreview <= #12/17/2006#
This does not seem to work. The same query works without this criteria.
To test this, I created just one record in table2 (table1 is blank at this time) and manually entered the dateofreview as 12/17/2006 and tried to execute the query. It is not able to show any records.
I'm running an update query that's based on a select query (that runs some calculations). The update query is updating ALL the rows that should be updated with the information in the select query with data from the final row in the select query, and not on a per ID basis as I think I have it set-up to do. The data looks correct in the update query, but again it's not coming out right.
I have an access table call "Department" and two fields calls "DSec" and "DCode" like this
DSec --------DCode 50 --------70.1587 60 ---------80.6987 80 ---------60.8521 70 ---------50.1512I like to make a query so that DSec -------DCode 50 --------50.1512 60 --------60.8521 80 -------80.6987 70 -------70.1587Please Help Thanks
I have a Contact table and imported data into it from another Access Contact table. All but one field inserted correctly - the "Notes" field from the table I was importing FROM was inserted into the WebPage field of my current table. So now I am trying to update my Notes field in the Contact table from the WebPage field in the Contact table - or move the data over rather. I created an update query but when I try to run it it is asking for the Notes and WebPage parameters.
