Modules & VBA :: Web Browser Control To Navigate A Website That Only Allows One Session At A Time
Oct 16, 2013
I have constructed an application in Access2010 that uses the ActiveX WebBrowser Control.I am using the Web Browser control to navigate a website that only allows one session at a time and normally (if using a regular web browser) if you close the tab you're working on, you have to completely close the browser and reopen it to be able to acces the website again.
I have this application on 2 networks.
On PC
A) when using the WebBrowser control I can navigate to the site. But if I need to navigate away or need to log in as a different account on the site, I can close an reopen the form and that will suffice to regain access to the site.
However on PC
B) it will not allow me to navigate back to the site by closing and reopening the form (the website recognises it is not a new session). I have to close the entire database and reopen it to get the site to work again.
I would very much like PC B) to be behaving in the same manner as PC A) so that I do not have to tell users to restart the whole database in order to reaccess the site.
View Replies
ADVERTISEMENT
Jun 18, 2014
I have a form with a tab control, inside the tab control I placed an ActiveX control (Microsoft Web Browser). These are at the bottom of the form.
Everything displays fine if the entire form fit on the screen but if the form is too long and I scroll down the browser control is getting obscured by the tab control and getting chopped off (the contents are covered). It is as if the browser control is staying in space where it was and moving behind the tab control as I scroll.
This problem does not occur if I place the browser control directly on the form. Also I note that the browser control is sitting correctly within the tab control.
I have been through all the settings and properties of both controls and haven't been able to fix it. I searched all over the web but no one has previously stumbled across this one by the look of it.
See the attached image ...
View 3 Replies
View Related
Jul 20, 2015
I have a pop up reports tied to my form so the usere can press the see list report of all the equipment they just scanned in or out of the building. I am useing the Date/Time data type (General Date) What I would like to get out of the query is when the user clicks the button it will show all entries from the time right before the button is pressed AND through 5 minutes earlier. (That would be the time that the user would of started scanning the equipment.
This is my current criteria : Between Now() And Date()
This is returning all transactions for the day. I really only want all transactions for that session.
View 3 Replies
View Related
Apr 2, 2013
I'm trying to use the Access 2010 web browser control to dynamically show a PDF.
The base file path is a constant (R:MS_ACCESS_PROJECTSSAFETYIMAGESMSDS SHEETS)
and the dynamic part is two fields from the selected record:
me.txtMsdsID & "." & me.txtVersion
what is the simplest way to "bind" this so that when a record changes it automatically refreshes this control? I've tried setting it with VBA, but it's not working consistently.
I know the issues isn't the file path, as it works fine if I paste it in windows explorer.
View 1 Replies
View Related
Sep 12, 2014
Just wondering if there is a web browser control or work around for reports?
View 2 Replies
View Related
Jul 1, 2014
I'm on Access 2010
I am using a web browser control on one of my forms The problem is that when I close my application down, after using the form with the wbc, an access process keeps running in the background. More severe: every time I start my app again and close it, another access process is added to the processes that are already running.
View 14 Replies
View Related
Dec 4, 2013
Access 2007
In a table I have 2 fields:
D1 , Date/Time , DefaultValue: Date()
D2 , Date/Time , DefaultValue: Date()+1
In a form (bounded to this table) I have, of course, 2 controls bounded to this fields:
txtD1 and txtD2
If the user change the value in txtD1 (using the Date picker) I like to change the DefaultValue for txtD1 to the new date and the DefaultValue for txtD2 to the new date + 1 day. Something like this:
Code:
Private Sub txtD1_AfterUpdate()
Me.txtD1.DefaultValue = Me.txtD1
Me.txtD2.DefaultValue = Me.txtD1 + 1 day
End Sub
I tried whatever crossed my mind... with the same "result" : #Name?
My Regional settings:
Short date format: dd.MM.yyyy
Date separator: Dot
Simple: 05.12.2013
View 14 Replies
View Related
Oct 20, 2014
I want to find out how I can write VBA to find out if a default browser is open to a particular webpage. I guess I'm going to have to find the browsers handle but I also don't know where to go from there.
View 7 Replies
View Related
Aug 23, 2014
I want to import data from a webpage using VBA and then store the HTML contents in a table (well, actually just part of the contents in fact).
View 7 Replies
View Related
Jan 27, 2014
If I have an XML file, I can load it into an XML document and parse it.
For an HTML file, I have been unable to find similar parsing methods - that is, using DOM and not involving a browser (other than simply treating the file as text). I'd prefer to avoid the browser control because it is different for a number of different Access versions, so the only option remaining that I see is to run Internet Explorer with visibility off.
Can one parse HTML using the DOM without a browser?
View 8 Replies
View Related
Oct 8, 2013
From access I'm calling a code in excel. My code in excel pops up a browser that allows the user to select what files they'd like to import. For various reasons I have to import data through excel, not directly to Access which is why the browser appears in excel instead of access. Essentially the user will select a word file which is imported into access through excel.
I'd like this browser to appear in access instead of excel though. If I move my browser from excel to access is there any way to have my code in excel reference the file selected in access? Or is there some way for this browser to appear without the user having to select the excel icon in the task bar? I essentially want the user to only see and interact with access, but because my browser is in excel this isn't possible right now.
View 2 Replies
View Related
May 4, 2015
I have a main form that controls 2 subforms. sbfActiveProjects displays a list of records that have not been flagged as complete. Upon clicking on a record in sbfActiveProjects, the details of that record show up in sbfProject. This functionality works great, except when I try to create a new record. The code works fine for getting a new record, however once I run the command I lose my ability to navigate to other active records.
Code:
Private Sub cmdNewProject_Click()
'set focus to sbfProject
sbfProject.SetFocus
'navigate to new record
DoCmd.GoToRecord , "", acNewRec
End Sub
View 2 Replies
View Related
Aug 19, 2013
We have a function that will allow a user to navigate to a text file and import it to a database. I've been asked to make it import ALL the text files from all sub-directories in the directory IF they've never been imported before (based on FileName and LastModifiedDate). I've set up a table to track what's getting imported (tbl_ImportHistory). I'm thinking what I need to do is use the previous coder's GetFileName function in a recursive loop removing the navigation request and adding the comparison and then, if it imports the file, the name and date need to be added to the tbl_ImportHistory table. But I'm completely unsure of how to do it.
I'm posting the GetFileName function below. I believe once I've got it modified the rest of the code can be left intact as it just parse's and loads whatever file is selected in the GetFileName function.
<code>
Function GetFileName() As String
Dim fd As FileDialog
Set fd = Application.FileDialog(msoFileDialogFilePicker)
fd.AllowMultiSelect = False
Dim vrtSelectedItem As Variant
[code]....
View 5 Replies
View Related
Aug 19, 2013
Actually what I am looking to do is have an Access application check some Web site for the presence of a number. This number could be the Serial number of the application and if this number exists to maybe show a message in the aplication or even terminate the application.
A quick and dirty way is for User Serial number 254, to put on a specific page of a Web site say arbitrary file 254.jpg (invisible on the Web site). The application would check for the existence of this file and if it is there, it could take some action. Everything would have to be done in stealth mode.
The following code can tell me if a specific URL exists, in this case [URL]
Code:
Private Sub cmdArbitray_Click()
Dim blnDum As Boolean
blnDum = blnCheckURL("http://www.VisualDentist.com")
' If blnDum = True then it exists
End Sub
Public Function blnCheckURL(ByVal strURL As String) As Boolean
Const FLAG_ICC_FORCE_CONNECTION As Long = &H1
blnCheckURL = (InternetCheckConnection(strURL, FLAG_ICC_FORCE_CONNECTION, 0&) <> 0&)
End Function
1) How can I check for file 254.jpg?
View 1 Replies
View Related
Jul 11, 2014
I'm new to Access and I'm using Access 2010.
I would like to be able to click a button on a form in my data base and login to a website using my username and password.
The manual login, requires two clicks after username and password, "Login" and "Click to continue"
I have tried many solutions found on the internet, none work for me. One forum reply was to send me a link to another site and it was for Excel. Is the code the same? Didn't work anyway.
From the website I want to login to, I have copied the code into a Word doc from the "inspect element" to work out the names of the fields I'm trying to put my username and password into. (see attached)
I would also like to be able to use Google Chrome as my web browser if possible?
View 8 Replies
View Related
Dec 29, 2004
Can I let a Session variable end when all the pages are closed?
View 1 Replies
View Related
Feb 25, 2008
I use Access to e-mail advice reports to my project managers. I have done this for many months using a macro "sendobject". For some reason this week I get the message "Can't Open Mail Session". When I look at the help note it says there might not be enough memory, close other applications but this is not the problem as I have nothing else open. I have tried it on another machine and still get the same message.
Any ideas?
Many thanks
View 4 Replies
View Related
Oct 28, 2004
Can some one please help with my SQL statement. Having trouble with getting the like statement to work with my session variable.
Here's the code I am using thus far.
<% If Session("PhoneN") Then %>
<%
dim objcn1,objrst2,sql4
set objcn1 = Server.CreateObject("ADODB.Connection")
set objrst2 = Server.CreateObject("ADODB.RecordSet")
sql4 = "SELECT * FROM [Bill To Customers] WHERE CompanyPhone LIKE '%' & PhoneN & '%' "
View 3 Replies
View Related
Nov 13, 2006
I am creating a database to track a student's course load in a degree program.
When the student enteres their ID on the first form I want to retain that value so subsequent forms and views display their records, or allow new entries/updates to different tables without re-entering their ID. I'm having no luck passing the value entered into the first form's text box to other processes selected prior to closing out the database.
Thank you.
View 3 Replies
View Related
Nov 18, 2012
I am creating a student database in ms access2007 but finding difficult to go further. In my database, I have created the following
Student-info-table
SemesterTable
SessionTable
PaymentTable
Then a query from the payment that shows student I'd,arrears,amount due,paid. And balance
My question is
1.How do I transfer the students and their balance to a new semester and session
2.Do I have to new student and payment tables every semester bcos payment are made every semester
3. I want to keep each students payment for as long as they remain in the school
4. A session is made up three semesters how do I transfer students to a new session
May be my tables layout are faulty...
View 1 Replies
View Related
Dec 1, 2013
I have a working dB which can calculate a shift duration and sum total all shifts worked within a period for the purpose of producing a labor report for payroll. I have successfully used the DateDiff function and converted the minutes to HH:MM on my form and reports. Now I want to calculate elapsed time for a specific period within a shift, I'll call it OtherHours and I am aiming to calculate a portion of time that meet the following conditions below. I am using field names of [PunchIn] and [PunchOut] and both are of type General Date.
IF [PunchOut] ISNOT Saturday,Sunday
EXIT FUNCTION
ELSE
IF [PunchOut] ISNOT Between Midnight and 0559 hours
EXIT FUNCTION
ELSE
DATEDIFF ("n", <MIDNIGHT>, [PunchOut])
My thoughts are to solve the DateDiff portion and then figure out how to apply the conditions within the IF statements.
View 4 Replies
View Related
Dec 9, 2005
Okay, seems like it should be simple... maybe I'm wrong though:
Any one know how to do real-time counting of the number of characters in a text box so that once it reaches 3 it automatically moves to the next text box? (Doing a phone number ... area code (int) and phone (long) to make for a total of 6 bytes.)
I've tried several versions of code for the on-change event but I can't seem to find the right way to assess the number of characters currently in the control... I'm pensive about setting an invisible control to just 'count up' because the on-change event would stack it even with a deletion. See most recent attempt below...
Obrigado,
~Chad
Private Sub txtAreaPhone_Change()
Dim bytCount As Byte
Dim strAPhone As String
If IsNull(Me.txtAreaPhone) = False Then
strAPhone = Cstring(Trim(Abs(Me.txtAreaPhone)))
bytCount = Len(strAPhone)
If bytCount = 3 Then
Me.txtPhone.SetFocus
Else
End If
Else
MsgBox "This is Null"
End If
End Sub
View 1 Replies
View Related
Oct 10, 2012
i have a list box with 6 columns. in column 6 there is a time field. on selecting this list box i want to set the value of a combo box to the time field.
so in the control source i put
[Forms]![frmAppointmentTreatmentItems]![comboTreatmentDuration]
This has no effect. I am not sure if i have done this correctly. but the combo box has manual values in it. the reason i want to have values in it is so if the treatment is 45 minutes at default. But i want to change it to 30 minutes just for a single occasion then i thought that this would be the way to do it.
View 11 Replies
View Related
Jul 12, 2013
I'm creating an attendance tracking system, the attendance system needs to : Allow an instructor to enroll students into one or more classes, and then add attendance by date to each class(es). The problem that I'm having is, attendance is tracked by the number of hours that a student attends class. For instance, if class1 is in session from 8a.m. - 12p.m. student1 may only stay 2.50 hours of that class and student2 may stay 3 hours. The teacher needs to be able to add attendance to class1 for July 12, 2013 and add hours for each student enrolled in this class session who attended on that day. I have the following so far, minus the attendance:
Students -This is just the basic demographic information that instructors will need to enter on students.
StudentID (PK)
StudentLastName
StudentFirstName
DateOfEnrollment
LevelOfStudy
DateOfBirth
Location - These are the locations in which our students can attend classes
LocationID (PK)
LocationName
County
City
LocationPhoneNumber
LocationFaxNumber
Classes - These are the classes that our students can attend.
CRNNo (PK)
ClassName
LocationID
InstructorID
Instructor - These are the instructors that teach our classes.
InstructorID (PK)
InstructorLastName
InstructorFirstName
InstructorEmailAddress
Enrollment - This table enrolls the student into a class
StudentID(PK)
CRNNo (PK)
LocationID (PK)
View 11 Replies
View Related
Jan 9, 2006
Hi there,
I have attached an image of a table which contains order details which has been imported from a txt file.
I require the postcode (in the customer column) to be transferred to the postcode column next to the despatch date for each order. The address rows can vary but there is never a blank line in between an orders' address - only a blank line between each actual order. And the postcode will ALWAYS appear at the end of the address.
To finalize the process, I would query the data based on the Despatch date column (ISDATE function) to then filter the details to show one row only.
So basically, how can I navigate the table to transfer the postcode to the postcode column?
Thanks in advance,
Paul.
View 7 Replies
View Related
Jan 10, 2014
I have a button to navigate to the next record. I also have a button to add a new record. I want the next record button to be able to navigate to the next record but I don't want it to be able to create a new record if I click the button while being on the last record. I want it to stop at the last record, making my add a new record button the only way to create a new record. How to do that?
View 8 Replies
View Related
