Code:
For Each Shape In pptslide.Shapes
If Shape.Top > pptshape.Top Then
'MsgBox Shape.Name
Shape.Cut
newslide.Shapes.Paste
End If
Next Shape
If I keep only the message Box inside the loop, it iterates all the shapes in the slide. But when I cut and paste the shape, it comes out of the loop after cutting and pasting.
When I am working on the Lesson 37 shown here:[URL]
I get to the point
Click the label that was added to the subform and press Delete (to remove the label). You may also need to move the subform and resize the tab sheet.
Now I assume the label to be removed is the original title of the subform or sbfVideos. That is the label that must be removed. It also says "You may also need to move the subform and resize the tab sheet." I will say that you do. My tab sheet is about 2 3/8 inches in width. I want to move it so the width increase to 3.25 as shown in the figure in the tutorial right after it says that you need to resize tab sheet.
When I grab the far right orange line and pull to the right the whole subform moves! That is not what I want.I merely want to increase the width of the form as I said above.Also in this narrow initial file when I switch to form, it cuts off parts, usually the Length. Of course, that is not what I want.
Having recently upgraded to Access 2013 I've noticed when designing forms or reports the Shape Effect button is greyed out. Also, when I click Conditional Formatting no dialogue box pops up. This is happening on all old Databases and new ones created with 2013. (Windows 7 64 bit)...
View 6 Replies View RelatedI know zero about Access and am posting this for another organization. When exporting to cvs, one of the fields is not exporting the entire text. It's a text-only field with about 300 characters. Is there a limit? Seems they had had this problem in the past, but fixed it. Can't find the solution again. Help and thanks!
View 3 Replies View RelatedI’m not sure where to post this, but I know my problem arises from either my table or my textbox on my form. My problem is I have a text box on my form where my Managers input text (example below), and at times it cuts off their entries with weird characters. I’m not sure if they have exceeded the text box limit or the memo limit in the table but below is an exact example of what is showing up in the table after they submit their entry. Any help on this would be great.
Of the 1,800 unit decline, 684 were empties. The load decline of 1,116 can be summed up in the following lanes and beneficial owners. Chicago to Austell -200 loads, Georgia Pacific. This freight now moves over the road. Chicago to Harrisburg/Rutherford - 353 loads, SC Johnson business lost to JB Hunt back in September. Inbound/Outbound Jersey business lost to CSX last October, -226 loads. 2005 we moved right at 450 loads from Jacksonville/Austell to Bethlehem/Rutherford and Chicago for the yearly Wal-Maů?Ā
I have tried everything I can think of-
I have a tabular form in Access 2003 that is cutting off the text disply in some text fields.
I am doing some comparisons so the fields are repeated three times.
All three fields are larger than the data.
Two fields display correctly and the third field, identical to the other two, is chopped off on the right side and just shows empty space after the first few letters instead of all the data.
Fields are all the same size in the underlying table.
Changing the format between left, center, right has no effect.
Text size is the same in all three.
All the data is from a single query on a single form.
There is no subform.
All properties for the three are the same.
If I increase the field WAY beyond the required size all the data shows, but I haven't any extra room to do this on the form.
Any ideas would be much appreciated :)
The Quick Style and Change Shape formatting command buttons greyed out. What setting do I need to change to make them available?
View 3 Replies View Relatedmemo fields chopping the content when appending to another table memo field.I have a query that takes in a couple of tables and then appends the content to one larger table.In each of the smaller tables there is a memo filed that when I check it has the entire type content in above 255 without a problem.
When the query runs and appends it to the larger table the content in the memo filed is chopped down.Both tables fields are set to memo I have double checked this.I have seen some comments about unique values in the query properties but these are set to NO as advised but it still does this.
I have to loop thru 2 recordsets.I need to first determine the quarter , then retrieve a value from each of the 6 fields for that quarter and compare that value against a previous years value that is also stored in the table for each quarter.the following is the field names not the field value.
Tier 1 2 3 4 5 6 PrYr
Qtr1 Q1T1, Q1T2, Q1T3,Q1T4, Q1T5, Q1T6 .385
Qtr2 Q2T1, Q2T2, Q2T3.Q2T4, Q2T5, Q2T6 1.25
Qtr3 Q3T1, Q3T2, Q3T3,Q3T4, Q3T5, Q3T6 .774
Qtr4 Q4T1, Q4T2, Q4T3,Q4T4, Q4T5, Q4T6 .333
if Qtr1 = Q1T1 = 0.44 Q1T2 = .50, Q1T3 = 1.45, Q1T4 = 3.00, Q1T5 = .25, Q1T6 = 6.0
So I need to be able to set the value of PrYR = .385 and compare against the value of the 1st qtr for each tier for Qtr1.Then go to Qtr2 and repeat the process but grap the Q2 PRYR value = 1.25 and compare against all Tiers for Qtr2.As so forth for each quarter.then I need to compare the value of the PrYr and if it is the following then
If PctYrlyIncrease< Tier1 Pct (Q1T1) Payout = 0
elseIf PctYrlyIncrease> Tier1 Pct (Q1T1) and < Q1T2 then
Sum(TotalNetUSExp * T1E)
ElseIf PctYrlyIncrease> Tier2 Pct (Q1T2) and < Q1T3 then
Sum( TotalNetUSExp * T2E)
and repeat for each Tier per Each Qtr.Here is my code so far:
Code:
Public Function BkOvrCalc(ByVal gContractID As String) As Long
Dim curDB As DAO.Database
Dim strSQL As String, strSQL1 As String
[code]...
Here is the code:
Private Sub Form_Load()
Dim rs As Recordset
Set rs = CurrentDb.OpenRecordset("select * from tblpatient, dbOpenDynaset)
If Not (rs.BOF And rs.EOF) Then
rs.MoveFirst
Do While Not rs.EOF
' do stuff
rs.MoveNext
Loop
rs.Close
Set rs = Nothing
End If
End Sub
I have watched it step through on debug and it does everything right for the first record, but it seems to come back to the same record.
I have a form where a textbox has shows the NameNo from the NameNo column in a db. At the moment I am using a dlookup to set the textbox = to the NameNo, but obviously this is only returning the 1st value in the column. How to get this form to automatically display each NameNo, creating a pdf of the form and then moving on tto the next nameno. I have the code to make the pdf working so far, all I need now is to figure out how to use the textbox to loop through all the NameNo's in the table.
View 3 Replies View Relatedi have the following code to get file list from specified directory:
Code:
Dim db As DAO.Database
Dim TB1 As DAO.Recordset
Dim p As String, x As Variant
[Code].....
the field "File_Name " is not set to accept duplicate the above code work fine , but when it find the file name exist on the TB1 it return an error i need the code if find any error continue to retrive other files on the folder not exit loop and also i don't want to make check if file exist it will lower the speed of code
Is there a way of looping through a non update able continuous subform, and using information from each line.
Which creates a new record in another table? so if there are 3 records in the subform it creates 3 new records in the other table and so on?
why my access always go over the loop that I am declaring..Here is a sample of my code:
Code:
Dim rs As New ADODB.Recordset
rs.ActiveConnection = conn
rs.Open mySQL, conn, adOpenDynamic, adLockOptimistic
For lngProd = 1 To 5
[code]...
I get the error of access cannot find the tbl_data6. Where in the declaration I wrote 6??
I believe this is most recurring scenario for all. Any simple way like:
Code:
For each file in folder.files
Msgbox File.Name
Next File
For your information the above code doesn't work
Basically what I am trying to accomplish is uploading multiples file automatically into server. The code I am trying to use works great if the user wants to upload a single file manually because the code prompts you to choose the file and I am wondering if there is a way to tweak the code. here is the code I am using
Code:
Private Sub Form_Load()
Dim objFTP As FTP
Dim strfile As String
[Code].....
this is a progress bar, what i need is, while execute loop (progress bar) but also execute next command = "LedgerExe:
On Error GoTo Proc_Err
Dim inti As Integer
Dim dblPct As Double
[Code]....
I work for an insurance company where various (and multiple) discounts or loads can be applied to a quoted premium for one reason or another.
These discounts/loads are stored in a table with a corresponding customer ID, where each row represents an individual discount/load (labelled and ordered-by a 'Step').
Unfortunately, the resulting premium from these discounts/loads is not stored in the database and are calculated on the fly by the front-end.
I have a requirement however, to store the 'new' premiums based on the stored discounts/loads for a report.
My problem is that the calculations must occur incrementally one after another, where the discount/load at each 'Step' applies to the resulting premium from the previous calculation.
The attached spreadsheet is demonstrative of the existing table where two additional columns have been added to show you what I need to calculate. 'Price_Amount' represents the discount/load in monetry terms relative to the calculation and 'New_Prem' is the premium resulting from the calculation step.
Notice that each discount/load applies to the previously calculated premium rather than the original one (Original_Prem = the starting point from which all further calculations should apply).
The full table would include many more rows for different customer ID's, where the number of 'steps' could be as few as 1 or as many as 7 per customer ID (ordered by 'Step').
Having toiled for many hours in Access to achieve the above, I am now resigned to the fact that only some kind of VBA function will achieve my requirements.
This function should take the Original Premium for each CustomerID and loop through each 'Step' applying the relative discount/load based on the value in 'Pricing' and the number type in 'Price_Type'. Once the function has calculated each step per CustomerID and has reached the maximum 'Step', it should move on to the next CustomerID.
such can only articulate the requirements without being able to convert this into actual coded logic. Nonetheless, I am in a bit of a pickle with this one and am under some pressure to create the report.
Is it possible to run a loop through each record in query, but refresh the query in between loops?
The query I am looping needs to be updated before moving to the next record.
t can't figure out how to get the query to refresh before looping.
I am using to select and append data to an output table. Everything is working fine until the last step. The last step appends all the data to an output table from the initial table. The intermediate steps select the data to output.
"AddExpenseToOutput()" is stopping about halfway through the list of criteria. Initially I thought there might be a null in the list, but it doesn't look like there is after dropping everything into Excel to manipulate.
Code:
Option Explicit
Dim rstAccount As DAO.Recordset
Dim rstAccounts As DAO.Recordset
Dim CAccounts As String
Dim Item As String
Dim AccountKey As String
[Code] ....
I have a sample database (attached) where I have a form called frmVoteHeadsOne. The voteheads that I have are swimming (Swim) and transport (Trans), which both appear for data in a table. On the form, from the combo list, I would wish that if I select swimming, for example, only Mark Tyler's name is returned since he has paid 2000; if I select Transport from the same list, only John clement's name is returned.
My purpose for doing this is because in the actual database, I have 21 different voteheads which I would like to get different results from based on what the user selects from the combo list.
I've got a problem with a loop for producing worksheets (reports). When everything works there's no problem but when one of the reports namely rptChemoOralWorksheet doesn't have data available to produce the report the loop finishes and then all remaining worksheets don't print.I've put in a standard error handler with MsgBox, but it's never triggered. I've also tried
Code:
On Error Resume Next
but again rather than skip the DoCmd.OpenReport "rptChemoOralWorksheet" (when the error is present) and move to the next one to continue printing through the list the loop stops and the subsequent code starts to run.
Code:
Dim mydatabase As DAO.Database
Dim rst As DAO.Recordset
Set mydatabase = CurrentDb
Set rst = mydatabase.OpenRecordset("atblChemoWSLoop", dbOpenDynaset)
Dim rsBN As String
Dim rsDose As Double
[code]....
Im trying to create a record set that compares a quantity value in the recordset to a Value in a temporary table that holds the most recent remaining quantity. I have the following code in the after update of a text box, but it does not trigger. I want it to run after a value is entered into the text box. Is the code wrong or the location im putting it incorrect?
Code:
Private Sub txtQty_AfterUpdate()
Dim rs As DAO.Recordset
DoCmd.OpenQuery "qryQuantitySoFar"
Set rs = Forms!frmReceive!sfrmReceiveDetailEntry.Form.RecordsetClone
[Code] ....
I have succeeded with retrieving subTable data from a One to many relationship, however, I'm stuck in an infinite loop processing the first record of the subtable and not moving to the next one.
Dim db As DAO.Database
Dim rstLandData As DAO.Recordset
Set db = CurrentDb
Set rstLandData = db.OpenRecordset("qryLandData", dbOpenDynaset)
Dim strLandType As String
[Code] ....
I am relatively new to VBA and have this loop (see below) was wondering if it was possible to build it into a variable, so I could call upon it within an IF statement.
Set ctl = Me.listSeeAllAssets
For Each varItem In ctl.ItemsSelected
rs1.AddNew
rs1!AssetNo = ctl.ItemData(varItem)
rs1!DateOfService = Me.DateOfService
[Code] .....
creating a small loop to run code.For each record from AREA with PLANTPROGRAMID = VARIABLE Then...In this example, my table is called Area, my field is called plantprogramid, and my variable is defined earlier in code.
View 5 Replies View Related