I am trying to change the data in my rows to columns...I have data as per the attached picture in columns B-I...I would like the rows to be pasted to columns as per columns M-Q...so row 1 ends up as the first lost of data in M-Q and row 2 ends up as the second lot of data.There are numerous rows in my actual file.
View RepliesThe key field is the specimen number and specimen type. Currently for every antibiotic there is a row with its result. My output is 3 complete worksheets so a lot of data. I need to create a database with one row per specimen number/type to include whether it is S/R/or I for each type of antibiotic. The example probably makes more sense. but I'm assuming that 65000 rows * 3 sheet can then be reduced to around 18,000 rows.
View 4 Replies View RelatedI was able to use the UNION ALL qry. But, when I have another file (like original2) that does NOT have all the columns listed in the UNION ALL qry, I get a Parameter value box asking for the missing columns when I run the qry.
Example:
original1IDDateGroupChristianJohnnySteve 18/5/2013A1528/5/2013B338/5/2013C2348/5/2013D2358/5/2013E5
original 2IDDateGroupChristianJohnny18/6/2013A212528/6/2013B2338/6/2013C2248/6/2013D22
The UNION ALL qry includes all the possible resources ( includes all the possible column fields Christan, Johnny, and Steve).
When I run the UNION ALL qry with the original2 file, An "Enter Parameter Value" box is displayed with the mssing column name "Steve".
Is there a way to Map the original2 table into a working table with all the columns, or use VBA code to construct the UNION ALL qry to only include the existing columns? My data has variable columns and I'm trying to avoid the parameter popups.
Hi, I have data from a form on my website in a text file, that corresponds to each visitor's input, each 13 lines in the form belongs to one visitor, as shown (twice) at the end of this message.
What I would like to do is have each visitors inputs translated to ONE row, with 13 columns/fields each. It could be appended to the same table or preferably generated in a new one. Note, there are no blank fields, some won't have data after their title, i.e. addy_line_2: is often blank, but at the very least, addy_line_2: or another field name is always there.
It would ROCK if I could also automatically take the name of each field out, i.e. each name is continuous characters up to the : (colon) ...
Thanks in advance, my Access knowledge is obviously limited, I'm sure this is fairly simple!
The fields:
Phone: 213-555-1212
Submit: Continue
addy_line_1: 1000 Melrose Place
addy_line_2:
badge:
city: Los Angeles
email:
homegroup:
name:
program:
state: CA
volunteer:
zip:
Phone:
Submit: Continue
addy_line_1:
addy_line_2:
badge:
city:
email:
homegroup:
name:
program:
state:
volunteer:
zip:
thank you thank you thank you thank you thank you !!
Hi everyone,
I can't get my head around this so I'm looking for some help if possible please, there are two questions, the first is:
When in the query, I want the criteria for the date selection to be a question, ie. "[Week Start Date?]" but I want the actual criteria selection to be from the start date plus 5 days, the only way I've done that so far is to do ">=[From?] and <=[To?]", which uses two questions and I don't seem to be able to do ">=[Week Start Date?] and <=[Week Start Date?]+5" which seems basically correct, but I expect I'm writing it incorrectly (basic access knowledge I'm afraid :( )
The second question (after I've got the 5 day date criteria sorted) is that the query produces a table that shows basically the following:
Name Store Date Visited
Tom Bury 18/01/06
Tom Bury 19/01/06
Tom Diss 20/01/06
Dick Thetford 18/01/06
Harry Diss 20/01/06
The query is based on a part week period with the starting date ALWAYS a Monday, so no more than Mon-Sat will appear, I want to put the information into a table or query, so the result ends up as:
Name Store Mon Tue Wed Thu Fri Sat
Tom Bury 18/01/06 19/01/06 'Blank' 'Blank' 'Blank' 'Blank'
Tom Diss 'Blank' 'Blank' 20/01/06 'Blank' 'Blank' 'Blank'
Dick Thetford 18/01/06 'Blank' 'Blank' 'Blank' 'Blank' 'Blank'
Harry Diss 'Blank' 'Blank' 20/01/06 'Blank' 'Blank' 'Blank'
*Where the blanks are simply left empty, rather than putting in the word 'blank'
Essentially converting the "[From?]" (as stated earlier) or "[Week Start Date?]" to Monday, that date + 1 to Tuesday, etc, BUT putting multiple dates relating to name and store criteria onto one record :eek:
Beyond me I'm afraid, any pointers would be seriously appreciated, I expect I'm approaching the problem from the wrong angle.
Regards
Tony
Hi everyone,
I can't get my head around this so I'm looking for some help if possible please, there are two questions, the first is:
When in the query, I want the criteria for the date selection to be a question, ie. "[Week Start Date?]" but I want the actual criteria selection to be from the start date plus 5 days, the only way I've done that so far is to do ">=[From?] and <=[To?]", which uses two questions and I don't seem to be able to do ">=[Week Start Date?] and <=[Week Start Date?]+5" which seems basically correct, but I expect I'm writing it incorrectly (basic access knowledge I'm afraid :( )
The second question (after I've got the 5 day date criteria sorted) is that the query produces a table that shows basically the following:
Name Store Date Visited
Tom Bury 18/01/06
Tom Bury 19/01/06
Tom Diss 20/01/06
Dick Thetford 18/01/06
Harry Diss 20/01/06
The query is based on a part week period with the starting date ALWAYS a Monday, so no more than Mon-Sat will appear, I want to put the information into a table or query, so the result ends up as:
Name Store Mon Tue Wed Thu Fri Sat
Tom Bury 18/01/06 19/01/06 'Blank' 'Blank' 'Blank' 'Blank'
Tom Diss 'Blank' 'Blank' 20/01/06 'Blank' 'Blank' 'Blank'
Dick Thetford 18/01/06 'Blank' 'Blank' 'Blank' 'Blank' 'Blank'
Harry Diss 'Blank' 'Blank' 20/01/06 'Blank' 'Blank' 'Blank'
*Where the blanks are simply left empty, rather than putting in the word 'blank'
Essentially converting the "[From?]" (as stated earlier) or "[Week Start Date?]" to Monday, that date + 1 to Tuesday, etc, BUT putting multiple dates relating to name and store criteria onto one record :eek:
Beyond me I'm afraid, any pointers would be seriously appreciated, I expect I'm approaching the problem from the wrong angle.
Regards
Tony
Hi all,
I have a query which runs off a table. I have the following Fields as columns in query: WeekID, A, B, C, D, E
For each week, the letters correlate points given. So for week 1, "A" could have 1 point, "B" could have 3 points, etc.
I want to run a Query that will show A, B, C, D, E as rows like the following:
Letter_Week 1_____Week 2_____Week 3
A_______1_________5___________3___
B_______3_________4___________2___
C_______2_________1___________7___
D_______6_________3___________3___
D_______3_________1___________4___
I can't run a crosstab because it will only crosstab values within all of A, B, etc.
Any idea guys? Thanks in advance, as always.
Caliboi
I have 2 tables and 1 query. Table dbo_RepOrderItem includes columns:
RepId
OrderNumber
Item
ShipDate
SerialCardID
Table tbl_LBP Sales Location Num includes columns:
Location ID
Rep Region Code
What I've been doing so far through my code is working through a query 'CalculateTotal' which looks up a structure number (Which I enter through an InputBox) from table dbo_RoicStructure, gets the SerialCardID from the same table and collects the associated RepId,OrderNumber,ShipDate from table dbo_RepOrderItem and checks that the OrderNumber(s) returned exist in column Location ID in table tbl_LBP Sales Location Num. It also checks that Rep Region Code is not equal to 'INT' nor 'inte'.
My code for all of this works just fine. What I am trying to do now is simplify my results. I want to only return rows that do not have the same Item, OrderNumber, and RepID.
Fore example:
OrderNumber: Item: RepID:
11 3 1
12 3 1
11 4 1
11 3 1
14 7 4
16 8 8
It would now count 5 existing RepID(s) rather than 6 because it would have deleted the duplicated row. This should only be deleted in the user's table not the actual table.
And speaking of the user's table. What I have been doing so far is only returning the results (right now it returns 6, which as I explained above is incorrect) but I also want to return a table or query that would should the user the work behind the returned number.
This is my code:
Option Compare Database
Option Explicit
Sub SearchPartNumber_Entered()
Dim txtPartNumber As Variant
Dim rst As Recordset
Dim rstt As Recordset
Dim u As Variant
[Code] ....
I have a big Excel file with payroll information about employees. Per employee per date, there are a couple of rows with mostly identical data (such as the employee's home address) but 2 differences: one will have paycode A with amount B, another will have paycode C with amount D, etc. I want to simplify the file to have 1 row per employee per date: in the example given that row would have paycode A with amount B as well as paycode C with amount D, in 4 separate columns.
I think I can technically solve this by creating Excel files per pay code/amount, and then linking them together by person and date, 1 by 1, through Access. This is feasible because there aren't that many different pay codes. But still, I was wondering if there was anyway to solve my problem in Access itself.
I have a database with a form that has 3 fields in a subform. I need to paste there data from multi rows. Now I have to do this column by column and paying attention that I select them correctly. Is there a way to directly insert the data by selecting only 1 field and have the data directly there as it would in excel?
Now we use excel as a "between" road to paste it there and then copy it from excel and paste it into access.
I have a cross tab query that displays data by customer (rows) and MONTHS (columns).
However I need the columns to be the 12 months of the year 1 to 12.
However, if the selected data for a particular customer does not have any records in a month then I get an error in the report as the cross tab query only selects the months with data.
How do I get the report to show 0 or a blank in these columns
I have a database with all the hours employees have logged stored in the database. Our payroll company wants an excel spreadsheet that has very specific info in particular columns and fields on the excel spreadsheet, so I'm trying to design a query which will put the correct info in the correct fields per their system.
The challenge is, I have currently a query with Employee ID, Overtime Hours, and Regular Hours as separate columns.
I need to translate this to a query with a single column for hours and a separate column that designates those hours as OT or Reg, with two rows for those employees who have both types.
Current:
ID / Regular Hours / OT Hours
101 / 70 / 7.5
102 / 30 / 0
103 / 5 / 0
Needed:
ID/ Hours / Type
101 / 70 / Reg
101 / 7.5 / OT
102 / 30 / Reg
103 / 5 / Reg
I don't know how to create a query or a formula in a query to break out each employee row into multiple rows with different data in the hours column. It seems like there's something pretty straightforward that I've done in a similar vein but it doesn't seem to work - I can do the opposite and combine those hours by using the SUM function in a query, but I can't seem to break it out this way.
Access 2007, Windows 7.
I am trying to convert a table that looks like the following...
Customer Name SumofSum of Bill Rate Reviewer
000462 John 500 Mike
000224 Mike 900 Jeff
I would like to covert it to....
Customer 000462 000224
Name John Bill
SumOfSum.. 500 900
Reviewer Mike Jeff
I don't think Access has any functions for this but I am not 100% sure. I know this can be done in a Module but I am not sure of how to code it.
I'm affraid my confusing topic title is an indicator of how confused I am by this. I can't even understand the variables well enough to fully utilize Access Help or the Search function here...
What I have is a database hat has column headers that look something like this:
Customer_Name, Order_Date, Qty_Ord, Unit_Price, Total_Price
What I'm trying to get is a query output that will have
Customer_Name, Total Orders (in Dollars) for January, Total Orders (in Dollars) for February, Total Orders (in Dollars) for March, etc.
I've been able to set it up to SUM for one month, but not multiples.
I know I'm totally lame (for proof read any of my previous posts) but you guys totally bailed me out the other time I asked a lame question.
Thanks in advance!
I use following function to concatenate data from multiple rows into a single row/field. It puts a comma ',' after each concatenate. What I would like it to do more is to put 'and' instead of comma between the last two concatenated words. For example: Now it gives me Value 1 but I want to get Value 2.
Value 1:
FormRegNo CombinedParticipants
DC-190 Political parties, CSOs, community residents
Value 2:
FormRegNo CombinedParticipants
DC-190 Political parties, CSOs and community residents
Function:
Option Compare Database
Option Explicit
Public Function ConcatField(strSQL As String) As String
Dim dbs As Database
Dim rst As DAO.Recordset
Dim strConcat As String
[Code] ....
Hi all,
Is there a way i can transform through a query or vba?
A | B | C
701 70-6
701 70-7
701 70-9
702 70-1
702 70-3
..... etc
transform it to
701 | 70-6 | 70-7 | 70-9
702 | 70-1 | 70-3
703 ....
Thanks in advance
I'm filling in for someone who has a strange love for mail merge and now I need to covert employee history from a row to a column for the mail merge.
I currently have a list of employees and every change in position is listed as a new row. Since all employees are not the same some employees have more rows than others. What I need to do is move the history rows into columns. So what I'll end up with is one single row per employees with their history going to the right. Some employees will have more columns than others. I tried doing a crosstab but that will only let me pick one column from the original table.
I have three columns that I need repeated over and over to reflect their work history.
this is what im working with
Name or ID will be the key
Job start date
Job title
department
currently every one of theese fields is in a column but every entry has its own row.
I need a single row for every employee and the columns to repeat to the right to reflect every move.
Can someone help me :D I'm stuck :confused:
I doesnt matter if the output is in something other than access
I have a two tables in my database related to employee ratings
Employee
TokenID
Division
Band
PMRating
TokenID
H1
Now this statement
Code:SELECT DISTINCT Employee.Band FROM Employee
This would display me all the band levels within Employee table in each row..
Is there any way I could built a query to the Band names as seperate columns?
i'm doing this so as to display the average H1 rating for each Band level ..that is grouped by Employee.Division..
Hello All,
I have created a table in access with the following column headings:
ID, A, B, C, D, E.
Column ID contains 9 digits text;
Column A column contains email address;
---------------------------------
Column B contains Currency ($); |
Column C contains Currency ($); | Source Fields
Column D contains Currency ($); |
---------------------------------
Column E contains order number;
Now I need to normalize this table to produce a new table with this structure - UNION QUERY is ruled b/c i have more than the three source fields:
ID, Source, and AMT
Where -
ID: would equal to ID;
Source: would be the value of the heading such as B or C or D;
AMT: would be the currency value of each corresponding column.
Help with the Module or any other way to do this will be greatly appericated.
Thank you.
-testcode
Hello,
I'm helping someone can help me with a little problem I am having with a peculiar data arrangement in Access. I have the following scenario. My table is set up with the following columns:
AgentID Skill_1 Skill_2 Skill_3 Skill_4
100 51 52 53 54
I want to create a new table that arranges the data like this:
AgentID Skill
100 51
100 52
100 53
100 54
Does anyone have any suggestions how I can do this?
I have the following scenario and do not wish to use a crosstab for various reasons. I am combining three queries into one. The last query has information as follows:
Project Type Rev Budget
12345 Debt 100,000
23456 Impact 50,000
34567 Other 25,000
There are hundreds of these line items. The first two queries hold the project information as well and that would be the field that I would use to join each query. Currently the information above is in line form and I need to put it in column form to coincide with my other data. The final result needs to have the following column headings:
Project, Desc, Exp Budget, Expenses, Debt, Impact, Other, Rev Budget
Please note that the first four headings come from the first two queries so I have this taken care of. how do I change the query to put the Type by line item as a column heading and sum the Rev Budget accordingly without creating a table and doing appends or update queries? Can it be done in the query where I am combining the three queries?
I have extraction report from calculation program and dont have access to tables. When I import it to MS Access it looks like attached Sheet1. Is there a simple SQL query or VBA code which will allow me to import the data to new Sheet2 table? Fields 1,7&13 will always be the same and I want them to be column names, Fields 4, 10 &14 contains data which will be different each time I delete the old calculation from Sheet1 and import a new one. I would like to be done in Access as I have to import few hundred calculations and store it in Sheet2 table.
View 2 Replies View RelatedIs it possible to total columns in a query? Right now, I have a query that produces the following column counts, but I'd like to total Pending, Overdue, etc. This data is being displayed in a subform.
Process Pending Overdue Total
-------------------------------------
Engineering 1 2 3
Procurement 0 6 6
<etc>
-------------------------------------
TOTAL 1 8 9 <- this is the line I want to add
Here's what the query (qryStatusRptB) looks like thus far:
Field: Process
Table: tblProcesses
Total: Group By
Field: Pending
Table: qryStatusRptA
Total: Sum
Field: Overdue
Table: queryStatusRptA
Total: Sum
Field: TotalRecords: Count(*)
Table:
Total: Expression
Can someone explain how to get the TOTAL ROW in here? (I can do it via another query, but that won't work since the data is displayed in a subform. I've tried crosstabs without success.)
Many thanks,
Christine
I have a table with 8 columns titled - Destination, Mon, Tues, Wed …to.. Sun. This is shown as "OriginalTable" worksheet in the attached example workbook. I want to create a new table from this original table that looks like "NewlTable" worksheet in the attached example. So I will have a new table that has 3 columns titled - Destination, Day, Weight. Weekdays will become rows so each destination will have 7 rows, one for each day of the week. The measure will be listed against each day of the week. Can someone please look at the attached example for me and help me with this.
Many thanks in advance.
I don't know if it is the right place to post this question, but I know many people here are good at both Access and Excel. The question is:
In an excel sheet,
A1: Smith, John
A2: 111 Pine St.
A3: San Diego, CA
A4: (555) 128-549
A5: Jones, Sue
A6: 222 Oak Ln.
A7: New York, NY
A8: (555) 238-1845
A9: Anderson, Tom
A10: 333 Cherry Ave.
A11: Chicago, IL
A12: (555) 581-4914
2. Type the following formula in cell C1:
=OFFSET($A$1,(ROW()-1)*4+INT((COLUMN()-3)),MOD(COLUMN()-3,1))
3. Fill this formula across to column F, and then down to row 3.
4.Note that the data is now displayed in cells C1 through F3 as follows:
Smith, John 111 Pine St. San Diego, CA (555) 128-549
Jones, Sue 222 Oak Ln. New York, NY (555) 238-1845
Anderson, Tom 333 Cherry Ave. Chicago, IL (555) 581-4914
This is exactly what I want. And I can do step 3 manually to copy that formula to each cell. But,
My question is in step 3. If I have thousands of lines, how can I fill that formula to thousands cells? from C1-C1000, F1-F1000.
I really appreciate it. Thanks.
I have a file structured as listed below. I need to pivot Patient Id, Patient Name, Send Reason, Provider Name and Visit Number into columns and then insert the values into the corresponding columns.
My data set contains about 1,000 rows, so I cannot simply paste special in Excel.
Patient ID 111111
Patient Name Doe, Jane
Send Reason Cannot resolve provider
Provider Name Doe, John
Visit Number ABCD#F1234567
I have tried Pivot and Transform, neither of which seems to work.