Modules & VBA :: Change Listbox Item With Double Click?
Dec 26, 2014I want to double click on one of listbox item and change it without opening any other form.
View RepliesI want to double click on one of listbox item and change it without opening any other form.
View RepliesI currently have a listbox. (list32) that is populated with results of a query. I would like to doubleclick on an item and have it open a form that displays the listbox record i clicked on and a "notes" field. Its my understanding that the table fields are limited to 255 chars so i was curious if I could make the notes field reside somewhere else. I will need the notes able to be edited, specific to record entry, and then saved on exit. Is this doable?
View 2 Replies View RelatedI have an access form which i have turned of menus, navigation and shift key. What I am looking for is to have buttons on my form to allow users to create and delete queries from my form. I already have a listbox that shows all the queries and runs them when a user double click on them.The codes needs to run in access 2007-2013 in both 32 & 64 bit versions.
View 3 Replies View RelatedIn the past a Teacher would manually create a Form (Student Form) containing Student information, (Name, Gender, Birthdate, Homegroup) as well as additional issues on the student. This would all be saved into a table.
I would like to change this manual process of typing in individually to each text box, therefore, I have been able to run a report from a external program that obtains (Name, Gender, Birthdate, Homegroup). This saves as CSV and I am able to import into a separate table within the database.
This works no problem.
What I have set-up is a form that contains a listbox this contains the Student name and Homegroup from the imported table contents. Again this works fine.
What i would like to do is when a student is selected from the listbox and dbl clicked on, how can i make information (Name, Gender, Birthdate, Homegroup) populate the textboxes in the Student form that the teacher previously used? could this be an update query where the imported table information will then go into the Student form? If so, how can I tell the dbl click of highlighted name is the data i want to populate?
On double click event in the listbox, code as below:
Code:
Private Sub ListBox_DblClick(Cancel As Integer)
Dim stDocName As String
Dim stLinkCriteria As String
stDocName = "frmTransactions"
stLinkCriteria = "[BinNumber] =" & Me![ListBox]
DoCmd.OpenForm stDocName, , , stLinkCriteria
End Sub
When I double click any row then it show Run time error 3464.
I have to do a app in access2003. My problem is when i try remove a item of a listbox not do it right. Example.
values of the listbox:
1
2,5
3
If i remove 1 or 3 not problem but if i try remove value 2,5 my list box show:
1,5
3
why??
my sentences if like this:
listbox1.removeItem(listbox1.ListIndex)
To introduce values i do a query and put them with listbox.addItem(value)
Perhaps any property of the listbox or something i am making wrong.
I have a list of companies in a table which Is being accessed through a list box. I wanted the user to be able to double-click on the name of a company from that long list and then for that selection to show up on an adjacent shorter list box which in turn will be used for a search. How can I do this? Another option would be to drag and drop the name from on list to another.
View 14 Replies View RelatedThis is probably failry simple if you know what you're doing, but I don't know what I'm doing....
I have a form (Purchase Orders) and on that form there is a search button to allow the user to search the customers table by customer name. When the user clicks the search button a search form opens and the search results (customer number, first name, last name) populate a list box named "lstCustInfo". How can I set the list box double click event to return the customer number, first name and last name to the Purchase Orders form? To make it even more complex I would like to return the data in two fields: customer number and LastName, FirstName. The problem with returning the results in two fields though is that I need to be able to break it into three to save it in the customers table because the table has a place for Customer Number, First Name and Last name.
Does anyone have any suggestions? Is there a better way to do this than returning 2 fields and having to break it back into 3 to store?
Hi everyone!
First, I want to say I would REALLY appreciate any help I could get with this problem. Let me lay out the details.
I DO NOT, DO NOT, DO NOT know the first thing about programming for ms access. I am an absolute novice, no exaggeration at all. I was a liberal arts major in school!!!!!
Here's the thing: being adventurous and all, about 2 years ago a co-worker and I were fiddling with databases to try and help out our employer keep track of dispatching his equipment for his business. With a little too much time on our hands, before we knew it, our database became fairly complicated, for such novices. A kind gentleman on this forum did us an enormous favor, and programmed a search form for our database. you could enter any or all of the id #'s for various equipment, and it would pop up in a list box. Double-clicking the listbox would open the particular record you were looking for.
Fast-forwarding to now, I'm trying to create another database to keep track of our inventory while while various equipment moves in and out of our yard. I have tried using the old search form as a foundation to create a similar search form for this db. I think I actually have it (kind-of) working! You type in a container number, and the record should pop up. which is a miracle all its own.
problem is, is that when you doubleclick the selection in the list box, I receive the following error:
"Run-time error '3075':
Syntax error (missing operator) in query expression '[ShipID] = '.
I click debug, and visual basic brings me to:
DoCmd.OpenForm "Inventory Table Form",,, "[ShipID] = " & Me.lstInfo
I don't know what to do! I'm sure it must be something painfully simple or obvious, but I'm really stuck & would appreciate any help.
Also, I would really appreciate any advice on this: I'd like to also be able to search by chassis # in addition to container number, but i don't know how to do it. no big deal, though. THANKS SO MUCH!!
p.s., I've attached the db. please let me know if you can open it ok
i will show you my list box code. i would like to make it possible for my user to double click on an item in the list and it opens that record in my 'zEnquiry' form (which has the correct named fields to display the data already)
i had some double click code but i deleted it, and now ive forgotten which post i found it in.
here is the code for my listbox
Private Sub QuickSearch_AfterUpdate()
DoCmd.Requery
Me.RecordsetClone.FindFirst "[Enq_Forname] = '" & Me![QuickSearch] & "'"
If Not Me.RecordsetClone.NoMatch Then
Me.Bookmark = Me.RecordsetClone.Bookmark
Else
MsgBox "Could not locate [" & Me![QuickSearch] & "]"
End If
End Sub
the user searches records and they are filtered..http://www.londonheathrowcars.com/searchform.jpghttp://www.londonheathrowcars.com/searchquery.jpgand when they double click i want the record to open in this form..http://www.londonheathrowcars.com/showform.jpghttp://www.londonheathrowcars.com/showquery.jpgtrying to put this code on my listbox but gettin the openform cancelled 2501 error on the bold line.. anyone see why?Private Sub QuickSearch_DblClick(Cancel As Integer)Forms("searchform").SetFocusForms("searchform").RecordSource = vbNullStringDoCmd.OpenForm "showform", , , "[jobref] = " & Me![QuickSearch].Column(0)End Subnote:on the search form.. the form has no record source.. the listbox has the record source of the searchquery..also on the show form.. the form has the record source of the showquery.
View 8 Replies View RelatedI'm in desperate need of a (simple I guess) code to allow me to send records from my listbox to a new form. Scenario goes as follows:
I use cascading combo boxes to narrow my available choices and finally end up with a listbox presenting the records filtered through cascading process. Now, I want to double-click on a record and load a new form with all this record's fields.
This is the code used to populate the listbox:
Private Sub FilterTypeList()
Dim strRS As String
' Filter the list box appropriately based on the combo box selection(s)
strRS = "SELECT qryTaxonomy.Type, qryTaxonomy.Article FROM qryTaxonomy"
[Code] ....
What is the code to open a form with the double-clicked record's fields, as described above?
Is it possible to load the data in input from by double clicking on data from list box ?
I have single form on which both input form and read-only form is present. as i used visible property to display or not accordingly.
User enters the data from input form. (It has been done)
User go onto read only form where combo box and list box. from drop down values load into list-box. (It has been done)
Now double click on any record then it should re-directed on input form with loading the data in editable mode for updation purpose. ???? (How this step will be done) ?
I would like to select a record on an already open form called "form_candidates" using a search facility but can't get it to work.
In "form_candidates" the data settings are set to "yes" (filters/edits/deletions/additions) and data entry is set to "no". On opening, the form is set to go to a new record.
In this form I have a button that opens a record search form so both forms are now open. I enter the first few letters of the surname into a text box, press a button and the listbox is populated.
In the doubleclick event of the list box I have the following code:
Dim CandID As Integer
CandID = Me.List4.Column(0)
DoCmd.OpenForm "form_candidates", acNormal, , "forms![form_candidates]![Cand_ID]=" & CandID
So I double click on the record, the candidate form is being filtered but the record isn't being shown.
I am using a continuous form and would like my users to be able to change a field background color to a light red by double-clicking. The user would also be able to change it back to white by double-clicking again.
The code I am using (below) changes the field background color for all records. I need my code to only change the field color of the current record and cannot seem to find how to do that. The field name is [System_CurrentStatus].
Private Sub System_CurrentStatus_DblClick(Cancel As Integer)
If Me.System_CurrentStatus.Backcolor = vbWhite Then
Me.System_CurrentStatus.Backcolor = RGB(234, 154, 160)
ElseIf Me.System_CurrentStatus.Backcolor = RGB(234, 154, 160) Then
Me.System_CurrentStatus.Backcolor = vbwhite
End If
End Sub
Whenever I double-click a graph in a form that is being viewed it opens up MS Graph in edit form. This is confusing/ugly/etc and I don't want it to do that.
I tried adding some code to the double click event to make it do some other action (bringing up some graph modification tools I created), but as soon as those are closed MS Graph will then open up in edit form.
How to turn this off? It's incredibly unprofessional.
how I can have a shortcut option when right click on each item on the list box. So I got my answer with below code that opens another form "frmshortcut" with a listbox inside that shows list of options like "new task" , "edit item" . Now my problem is (like attached picture) the shortcut list (frmshortcut) will be open in another place when I right click the mouse, it is far from location of click. Also it shows some default in access when I right click in the listbox ("subform", "cut", "copy"), actually I do not like it shows these, just I like it shows shortcut list I have defined by the list box.
Private Sub ItemList_MouseDown(Button As Integer, Shift As Integer, X As Single, Y As Single) Const RIGHTBUTTON = 2 If Button = RIGHTBUTTON Then DoCmd.OpenForm "frmshortcut"
' DoCmd.OpenForm "frmshortcut", acNormal, , , , acDialog
Forms!frmshortcut!txtparameter = Me.ItemList.Value
End If
End Sub
At the moment I have a query that returns a result based on what's selected in a combobox.
SELECT ComponentT.ComponentType AS ComponentType
FROM ComponentT
WHERE (((ComponentT.TotalComponent) Like [Forms]![DeviceF]![D_ComponentNameCmb] & "*"));
Instead of this I want to rewrite the query to return a result based on what the user has selected in a list box of items. How would this query look. Would I need to increment it in a loop checking all entries into the list box as it can vary in size and if so how?
I tried changing the last line to WHERE (((ComponentT.TotalComponent) Like [Forms]![DeviceF]![D_OutputLsb].[ItemsSelected] & "*")); which returned a result just not the right one. Is there something wrong with the syntax?
code to save data in listbox to a table in vba access
View 2 Replies View RelatedI am having trouble with a If statement. I am trying to save a record into a table when an item is Selected (highlighted blue) in a list box. Keep in mind that my listbox is set to multiple selections. I have the following code but sometimes it works and sometimes it doest.
The reason why I am trying to get this to work is because when a item is selected I will add it to the table and when an item is deselected I will delete it from a table. See my code and pictures I have attached :
Private Sub list_audits_Click()
Dim strsql As String
Dim list As String
Dim id As String
id = Me.User_ID.Value
[Code] ....
Show me the selected item in a Listbox without looping in the whole list, because my Listbox is multiselect and I want only the item that selected recently.
View 8 Replies View Relatedi have a form that there is a list box inside that. after selection of items (usually 20 items) and right click the mouse on items it should open another pop up form,the problem is after right click selected items will be unselected except one item that there is mouse on that. how can i prevent list box from deselecting items after right click .
the code for mouse right click is like below:
Private Sub ItemList_MouseDown(Button As Integer, Shift As Integer, x As Single, y As Single)
Const RIGHTBUTTON = 2
Dim udtPos As POINTAPI
Dim frm As Access.Form
If Button = RIGHTBUTTON Then
Set mp = New [*clsMousePosition]
GetCursorPos udtPos
DoCmd.OpenForm "frmshortcut"
DoCmd.MoveSize udtPos.x * mp.TwipsPerPixelX, udtPos.y * mp.TwipsPerPixelY
Forms!frmshortcut!txtparameter = Me.ItemList.Value
End If
End Sub
I have a combo box that populates many listboxes based on a selection (listbox values are coming from another table [Master]) - simple enough. I want the listboxes to populate with DISTINCT entries - also seems simple enough (right?).
As you'll see below, if the user selects "All" from the combo box (cboSite), I want the listboxes to populate with distinct values from all sites; otherwise, any other selection is a unique site and the listboxes will populate with distinct values based on that unique site.
This works BEAUTIFULLY if I select a unique site, but when I select "All", there is always one (and only one) duplicate value in EACH listbox. That is to say: all values but one in the listbox are distinct.
FOR EXAMPLE:Select unique site (not "All") from "cboSite"
The listbox "lstMajEquip" (which only has values "Yes" and "No") populates to show "Yes" and "No"
Select "All" from "cboSite"
The listbox "lstMajEquip" (which only has values "Yes" and "No") populates to show "Yes","No", and "No" (what?!)
As mentioned, this happens for all 8 of the listboxes, not just "lstMajEquip"...
Using Access 2010
Code:
Private Sub cboSite_Change()
If Me.cboSite = "All" Then
Me.lstBusiness.RowSource = "SELECT DISTINCT Master.Business, Master.Site, Master.Exclude FROM Master WHERE (((Master.Exclude)=False) And ((Master.Business) IS NOT NULL) And ((Master.Business)<>''));"
[Code] ....
Morning, all...
Hoping someone can help me with this. I have a form (one-side) with a bound continuous subform (many-side). I have a second unbound subform, also continuous, which is used as a reference only (no data entry) to select the record to be added to the bound subform. Is it possible to set it up so that, when the user double clicks on the pk from the unbound subform it adds that pk as a new record on the bound subform?
Thanx in advance for your help with this ;<)
Karen
I want to lookup a list of employees (in a form) and by double clicking a name listed, have that name pasted into another form or Sub form to add details to it.
I want to select a number of employees and add info such as attending a training session, plus the topics covered, instructors name etc. I want to add this info once but relate it to a number of employees who attend the training???
Hi,
I have a form which has a tab control on it. The form itself is based on 1 table (tblCustomers). The tab control has 2 pages.
Page 1 shows 6 fields from tblCustomers.
Page 2 of the tab control shows 2 embdedded forms. Those forms are based on queries created from tblCustomers. one shows records with a date entered into one of the fields, the other shows records that have no dates.
What I want to be able to do is when I see a company name in one of the ebedded forms (Page 2), I want to be able to double click that record and it switches me back to Page 1 and shows the the related details of whichever company I double clicked.
I have changed the double click event in the emdedded form and using the builder to create something. I also added a setfocus command as I read about that somewhere (but i have no idea what it does). Through this I managed to get it to switch from Page 2 to Page 1 when I double click, but it only ever takes me to record 1 regardless of which company i double clicked.
i may have this deisgned totally wrong so please feel free to point me in the right direction.
any ideas?
thanks in advance