The DolphinBatchNo has number data type but the following sql statement doesn't capture the ight records. it doesn't check id dolphinBatchNo is blank.
Code:
strsql="select * from `MasterTBL` where PolicyNumber>=" & TxtFPolNo & " and PolicyNumber<=" & TxtLPolNo & " and PolicyStatus='Live' and DolphinBatchNo is null order by PolicyNumber"
i have multpile yes/no check box i want if i check on one the name of this check box is written on another one.
so i neeed a code for loop of check boxes and i need a code i.e loop all check boxes if any is true then put name field in {new field}
I just started my project database on my subject ITM4. My Database is entitled PCExpress Inventory System. I would like to know how to input (Text) in a Field where the Data Type is (Number) just like the North Wind.
View 3 Replies View RelatedI have a table with a field with names set to text data type and i want to change it to number data type but when i do it in design view the data get lost. I want to know if there is a way to convert the data in the field as number type and keep the data in the field.
View 7 Replies View RelatedSee attached the Workbook. I need to check the policy Numbers in Column A of all the sheets in the attached workbook if its present in Access Table. If yes then write the corresponding ScanDate and BatchNo from Access table to columns I and J of all the sheets. I need to write VBA code to perform it.
In the attached workook, only Sheet1 contains the data but in actual there will be data in 5 sheets in the workbook.
How can I check if a table contains blank fields/values.
If there are blank fields I want to replace them with 0.
I have a DB that was given to me with a SSN field that has the Number Data Type. Therefore, if the SSN has a zero as the first number, it is not coming up. Other than changing data type to Text, is there a property that would keep the initial zero? Thank you for your assistance.
View 2 Replies View RelatedI am trying to format my Number data type to look like this: 0001 / 2013 where "0000" is the prefix, 1 is the number and " / 2013" is the suffix.
Tablename: tblclients
Field Name: DelNoteNo
Data type: Number
Form
Control Name: DelNoteNo
Control Source: DelNoteNo
I am searching on this forum but I can't get it working.On the Before Up date procedure i have:
DelNoteNo = Nz(DMax(DelNoteNo, "tblClients"), 0) +1
but its is giving "invalid use of Null "
In my report, I have combo boxes that display numbers (for example min_revenue and max_revenue).
In case of a "0" or "999.999", I would like to display "n/a" within the combo-boxes.
I would like to avoid doing this within the table, because I would like to keep the data type in number format.
Remark: I confused "combo-box" with "text box". I'm using text boxes, which are supplied with values from a table
I have an order table [OrderMain], which contains [OrderNumber] "Auto Number" along with various customer related only info
Then i have a order line table [OrderLines] which contains the items ordered. Which looks like
OrderNumber
OrderLine
PartNumber
These tables are in a form, relationship of [OrderNumber]
This structure enables me to order as many parts as i'd like against 1 order number.
What i would like to do is set something similar to a auto number in the OrderLines table. This would be in the Lines Field.
The problem is, AutoNumber can't be used in the [Lines] field as each new order line # would continue from the last #.
The result would look like:
I want to input data number such as 0.5 in my table, but it doesn't work. I already fill field size : integer with format : Standard with Decimal : 2, but the result is always 0.00 not 0.50 as my expectation. How to define that in my table?
View 5 Replies View RelatedI have a table that contains many records of events. I've already created a multiple item form based on the table. My form contains 2 textboxes for input of a date range and a dropdown box to select "yes or no".
What I am having difficulty with is the query that will count the records by type insert it into the recordsource such that the multiple item form will appear like this:
Event Type| Count
Input | 4
Output | 2
Update | 3
How do I go about doing so? I have been testing with this simple query:
Code:
Private Sub Command8_Click()
Dim Task As String
Task = "SELECT EventType, Count(EventType) FROM Final GROUP BY EventType;"
Me.RecordSource = Task
End Sub
But the column that contains the count keeps appearing as #name?
I created several tables that contain the look-up data I want to post to database which I will use as the repository for a SharePoint form.Users visiting SharePoint site will enter the data to be kept in an Access database so we can create reports (not seen by the user)
Problem: When I created the database I linked fields to tables to create the look-up lists using the wizard.
When I saved the database, the first field that I linked returned a value of "number" instead of whatever the default value should be for a look-up text field.
I need a field to permit only numbers. Upon selecting number for the data type I select Long Integer for a longer number... But it only allows 9 digits.. I need it to allow to enter in longer numbers... Any help?
Thank you very much in avdance
I have two tables(see below). I want to set up a query, link these 2 tables together. I set a one-to-one relationship between Client ID in two table. But got error message :"Type mismatch in expression".
I tried to change Client ID data type from "Text" to "Number", then Access deleted some data under Client ID in Order table.How can I make this work, but not having to re-type in all data?
Client Table:
Client ID(Autonumber)
Client Name (Text)
Client Address (Text)
Order Table:
Order ID(Autonumber)
Client ID(Short Text)
Unit Order(Number)
Unit Price
So I have decided that I want my ID's to be AutoNumbers, but at the moment they are currently set as Numbers. I have already inserted data, to test, which has been deleted, however I am now unable to change the ID field back to AutoNumber.
How can I duplicate the tables so that this field can be changed again?
I have like 10 tables with heaps of feild, so remaking them will take long, but I know there is a way using queries, I am just not sure how...
:confused:
Hi,
I would like how I can generate automatic Id in a table with following structure. billid number, billdate date& time.
I don't like to use AutoNumber built in feature.
Regards.
Soumen.
I have an existing form where users type in information and it generates a couple of reports. In one of the fields, Customer PO Number, the user enters a number from a customer. Up until yesterday all of the customers we have been dealing with have used numbers only for their PO numbers. However, we have a new customer that requires alphanumeric PO's. Is there a simple way to change this field from a number to alphanumeric without having to redo each form, report and/or query. I am using MS Access 2010.
View 9 Replies View RelatedI'm trying to create some code that will create a new folder depending on the ID that is currently being added to the database.What happens at the moment is a new ID is generated which in turn is job reference.When this is added to the database a folder is created with a prefix of this ID number and a 20char test specified in a text field by the user.
What I am trying to achieve is this:If the ID = 57...Then a folder is create called 1 - 500 (and ignore if one has already been created, which it should have at ID number 1)...When the ID Number 501 comes along another new folder is create called 501 - 1000 etc etc.The idea is not to have 3000+ folders in just one folder making it look a bit messy and lengthy to look through.
is there a function that will let me check if a value that was input is divisible by 6?
View 2 Replies View RelatedI have two tables in a query joined by a ID field. The problem is in the one table the ID fiels is a text format and in the other table its a number format so the query builder doesnt like that and gives me the Type mismatch in expression error.
There's no way around it though; i need it to be those formats in its respective tables for reasons i wont go into here for simplicity.
I'm having an issue with the database being read only and a type mismatch due to OpenRecordset. I know this database use to work when it when it was just
CurrentSerNum = RecSet(0) +1 was doing the incrementing.
I need the database to increment in a different way now.
Q=manufacture location
1st number is new=0 or used=1
2nd and third number =82
4th is single digit year aka 2015 = 5
6 and 7th are work week aka 25 for this week
8,9,10 are incremental numbers for the units made that workweek, so 001,002,003.
Then week 26 starts the increment starts back at 001.
Code:
Private Sub MakeThoseProducts_Click()
On Error GoTo Err_MakeThoseProducts_Click
Dim NumericSerial As Double
Dim WorkWeek As String
Dim WorkYear As String
Dim WorkWeekNumber As Integer
Dim WorkYearNumber As Integer
Dim Location As String
[Code] ....
In a query I would like to extract the last ten years. This is what the data looks like:12/13 (Data type = text)(Short for 2012/2013 which actually represents 7/1/2012 to 6/30/2013.)
I am able to extract the "12" and turn it into the general number 2012 using: ("20" & Left([TAXYR],2))*1..But how can I convert that to the data type-date so I can include those records in the past ten years from todays date? I was trying to use DateAdd but I think the problem is the data type and where converting to date gives me "1905" or "9/##/1905." I get why it does that, but is there a workaround? Maybe adding 39,785 days?? (2014-1905)*365
I'm having trouble with a field on my DB. I have a field named zip code. It has a limit of 5 characters that are only number values, I'm not having any trouble with entering information at all, it's easiest when I just tab into the cell from the previous one. However, the part I am having trouble with is when I click within the field and the cursor, let's say, is at the second character line, and I enter the zipcode 15222, it'll only enter 1522 since my cursor is at the second line.
How can I fix this so that wherever my cursor is, within the box it'll type the full 5 digit zip code? My boss is insistent on making sure that even if he clicks towards the right of the box, it should type the full number.
i want to check if the number and the date of telegram is existed
the number should be LIKE not equal
the date should be equal
this is what i wrote
Code:
If DLookup("Telegram_Number", "tbl_Violation_Of_Building", "Telegram_Number Like " + Forms!frm_Add_Violation_Building!Telegram_Number + " And Telegram_Date = #" & Format(Forms!frm_Add_Violation_Building!Telegram_Date, "yyyy/mm/dd") & "#") Then
MsgBox ("number existed")
[Code]....
I have a field in a table that is comprised of mostly numerical data but some records are text.
I want to convert this field to numerical only and make a new field to put the textual data in.
However converting the field will delete the textual data. What is the easiest way to convert the field but save the textual data AND append the textual data to the SAME record that they were in originally in the new field?