I have a mdb file that does not have database or user level security, but it does have a VBA password.I want to transfer (overwrite) a new form to this database from another Access database. The form I'm exporting has VBA code. When I try using docmd.TransferDatabase I get an error. The error is:
"The TransferDatabase action was canceled."The line is:
where txtCheckInFile is the location and mdb file name I'm trying to send the export.It might be because the form already exists. So, if I go into the database and delete form, and repeat the export I get the message:
"Microsoft protect this Visual Basic for Applications Project with a password. You must supply the password in the Visual Basic Editor before you can perform this operation."My question is it possible to transfer a form to a MDB that has a passworded VBA? I know the VBA password.If not, perhaps it is possible to remove the VBA password in the database (using VBA), make my export, and then add the password back in?
I'm using the DoCmd.CopyObject method to copy a table from my front end db to my back end. My back end db is password protected and it keeps prompting me for the password. Can I somehow send the password in code so that the user is not prompted?
Firstly thank you for your help, this should be a simple one I hope, but is cracking my head on the wall. Have searched and searched and can't find an answer.
I have an Access Db that is not password protected, but is asking for a password. It opens on any other machine fine?
I think my version of Access is playing funny buggers with me, any suggestions?
I was trying to implement some security on this Db, which is why it happened I'm sure. I ran the security wizard, set-up two users and admin with passwords, I have the output file to "recreate" something too.
Issue is, I then copied this Db to another computer for use on there, it worked without a Password, so didn't need to worry about it, now I can't open any Db on my machine??
How can I add a password to a button, i.e. whenever someone clicked on this button he has to enter a password in order to proceed to the form which the button opens?
I have found the following code to password protect my form, it works but I have one problem, the input txt box does not have the input mask set so the password can be seen on screen, here is the code I have:
Private Sub Maintenance_Button_Click() Dim strPasswd
'Check to see if there is any entry made to input box, or if 'cancel button is pressed. If no entry made then exit sub.
If strPasswd = "" Or strPasswd = Empty Then MsgBox "No Input Provided", vbInformation, "Required Data" Exit Sub End If
'If correct password is entered open Employees form 'If incorrect password entered give message and exit sub
If strPasswd = "ssd" Then DoCmd.OpenForm "Maintenance", acNormal DoCmd.Close acForm, "Menu", acSaveNo Else MsgBox "Sorry, you do not have access to this form", _ vbOKOnly, "Important Information" Exit Sub End If
End Sub
Can anyone advise on what vba cmd to use in the password string to enable the password input mask?
Hi, I have a button on form A that opens form B, but i wud like to put a password on this button, so when you click it, you have to type in a password before form B opens. I'm using access 2000.
Hi Everyone, I am attempting to move a password protected database to a different folder on our shared drive but I am not sure the steps that are needed to do so. The database is already split. Can someone please assist???
Hi, I'm trying to convert a access database in to a sql server. My client hasn't got the exclusive access or doesn't have a username password for the access database. I'm trying to import the data in the access to sql server and when I try to open it it says " This error is usually associated with opening or converting a security enhanced Access 97 or earlier database. If you are not the owner of the database, you most likely will not have the necessary access rights to open or convert it. "
Hi guys! I have a front-end (FE) linked to a back-end (BE) db. I have added a password to the BE, but the knock on effect is that the FE won't work now. Just says 'Invalid Password'. I'm using MS Access 2002.
Any help would be appreciatted.
(The password is to prevent unwanted users from deleting data on the BE on the server)
I use a database that someone else set up and is no longer here. To get access to the database you need to enter a user id and password. I have a new user who has been getting into the database using an established user's id and password.
I went into the file and found the table with the users, their id's and passwords listed, and added the new person to the table, but I still get an invalid user message when trying to access the database with the new user's information.
I went through the Access Help and tried a couple things it said for adding users to a password protected database, but either I didn't do it right, or the way to add a user is different from what I am getting from Access Help.
Lastly, this database is different in that if I would add a report, it only shows up on my computer when I access the database, the report doesn't show up on anyone else's. That is odd to me, but it is how it works.
Hi, I have been opening password protected access 2003 databases with ASP / ADO for years now. However now we have updated to office 2007 everything gone bottoms up.
I have an access 2007 database (newly made, not converted from 2003), and a fresh asp page. I've gotten the new connection string information for Access 2007 from the internet yet the page cannot open the database.
When I try to open the page the error i get is - "Not a valid password" - 80040e4d. I'm 100% sure the password is correct, the driver is right (the server has office 2007 installed, and the new access driver from the M$ website). Every page i've seen on the internet says that the code I'm using is correct, yet asp still can't open it.
If i remove the password from the database it opens fine, so it's not a corrupt database, or bad path in the code.
If you can shed any light on my problem I would be eternally grateful - been working on it for hours now!
I have to do this and I believe there is VBA code to re-link tables when needed that can be found on the web. My client needs access to everything because he will move on to another developer after this, so what I thought I would do is send him a private file that has the password for the backend and then just write the ADO code needed in the app's front end to connect with the password.
My workaround was to temporarily map the URL to a vacant drive letter on the local machine, then copy the file over, then drop the mapped drive again. A bit clunky but doesn't incorporate much of a delay and this download only has to happen once per day.
The good news is, the file download / copy now works every time. The bad news is that removing the temporarily mapped drive after the copy has taken place, doesn't and I can't figure out why.
Here are the functions I use to map / unmap the drive :
Code:
Option Compare Database Option Explicit
Private Const RESOURCETYPE_ANY = &H0& Private Const CONNECT_UPDATE_PROFILE = &H1& Private Const RESOURCE_CONNECTED As Long = &H1&
[Code] .....
I have separate functions to check existing drive mappings on the local machine and thus determine an appropriate vacant letter to use for the temporary mapping - they work fine.
Unfortunately the UnMapDrive function returns False (even though I switch the active drive to C: and force the connection to be cancelled with the fForce flag) So the mapping always remains on the users profile.
I don't want to permanently map drives on the users' profiles, just briefly for the purposes of this daily file download.
I need to schedule the opening of a MS Access database which is password protected.
I think the best way to do this would be to use schedule a batch process to run, can anyone help with the script to create a batch proccess to only OPEN and CLOSE an MS Access database?
I have a password protected form that works fine. However, when you type in the password it can be seen on the screen. Is there a way I can change that so that when the password is typed in it can't be read (perhaps showing asterisks)?
This is what I'm using:
In ON CLICK event Dim PassWord As String PassWord = InputBox("Enter Password") If PassWord = "MYPassword" Then ' Open Form DoCmd.OpenForm "MYFormName" DoCmd.GoToRecord , , acNewRec Else MsgBox ("You're not authorized") End If
Hi All, I have three excel files (ActualHires.xls, ActualPromotions.xls and ActualSeparation.xls). These are password protected files (with the same password). They are linked to an access database and whenever the files are opened, one must supply the password and click the 'Enable automatic refresh button.' What I was wondering was if this could be done in access with a command button. I have pasted some code below that I found but now I'm getting an error. This is the code:
For B = LBound(BookNames) To UBound(BookNames) WorkBooks.Open FileName:=BookNames(B), _ UpdateLinks:=3, Password:="*******" WorkBooks(B).Close SaveChanges:=False Next B
But when I click the button, I get this error: Run-time error '9' Subscript out of range.
and this line is highlighted: WorkBooks(B).Close SaveChanges:=False
I am attempting to link a table in one database to another database using the server name designation (ie.//2sxfprinff01Group) instead of the mapped network name (ie. G:). I tried relinking using the Access Link Manager. Right click on the linked table. But it does not let you edit the link.
Access 2007 does not allow this and reverts links to the G: drive. There are situations where the the IT department have set the mappings to this shared location as an H: for some of the employees. In those cases, the employee gets an error message telling them that Access cannot locate the G: drive.
An obvious solution is to get the employees remapped to the G: drive. However, one would think that MS would have allowed for mapping to the designated location and not an alias.
I am building a very comprehensive Membership Management Database with extremely useful facilities initiated by some 20 or 25 Queries..
The database includes 5 Tables which store data relevant to members, another which stores details of Interest Groups and a 3rd which stores which members are affiliated to which Group or Groups.
Currently the database is accessible only by a very limited number of persons and data can be entered/edited by only one person. The database, using Access 2010, is maintained on a desktop computer and synchronized to a copy on a Cloud.
My requirement is to permit some 50 Group Leaders to input/edit data on a Password protected Group Members Form such that that is the only element of the database that they can access. The Forms would have only 2 fields from which the user would select entries from drop down lists.
My query is ; is such a procedure feasible in principle and would I be correct in assuming that the user would require to have available a copy of Access.
I have a code to relink a 2 backend files at start up. The problem is one of the files is password encrypted.
Code to input the password?
Dim dbsTemp As Database Dim strMenu As String Dim strInput As String ' Open a Microsoft Jet database to which you will link ' a table. Set dbsTemp = CurrentDb
[Code] .....
This part is calling the password protected database
In Access2010 I have created a linked table to a SQLServerExpress database.I have a user in SQLserverExpress with only reading rights.This linked table is used in a form which only shows the information. When opening the form, it prompts for the SQLserverExpress username and password.How can I configure the linked table so that it logs in automatically with the SQL user I prefer so that the user does not need to enter a user / password?
So I do map drive on this way and it is successful ...
Code: Dim FSO As Object Dim objFile As Object Dim objFileS As Object Dim WshNet As Object persistent = false set objNetwork = CreateObject("WScript.Network")
But I need to have mapped drive hidden from the client users So I red that i might be possible if put $ after the share folder
Code: objNetwork.MapNetworkDrive "driveletter:", "serversharename$", persistent, "username", "password " but it does not work.. the other way is to set values in win registry, but I don't like that way...
I have a form displaying records. I would like the user to be able to select a button, browse for a file on a shared drive and link it to that record.
I have been exploring hyperlinking, which works for the most part, although I need it to display the share name rather than the drive assignment for that user. Such as drive1folder rather than C:folder.
Hyperlinking also unfortunatly requires the user to right click on a field select edit hyperlink then browse.
