MsgBox Not Working!
Jun 29, 2005Can anyone tell me whats wrong with this code, its not working for me!!
If ((txtpassword = "") Or (combusername = "")) Then
MsgBox "Please Enter A Valid Access", vbOKOnly, "Error"
End If
Can anyone tell me whats wrong with this code, its not working for me!!
If ((txtpassword = "") Or (combusername = "")) Then
MsgBox "Please Enter A Valid Access", vbOKOnly, "Error"
End If
I am calling a continous form from a combo box on another form. The code below used to warn me that there were no records and shut the form down to avoid showing a blank form.
Private Sub Form_Load()
If IsNull(Me.TxtUnit) Then
MsgBox "There are no operations recorded for this Unit", vbOKOnly, "No Recorded Operations"
DoCmd.Close
End If
End Sub
All was working fine until I changed the properties of the continous form to "Allow Additions = No" to remove the spare blank line at the bottom of the records (just for neatness really).
Now, if there are no records to display, the Me.TxtUnit is not Null anymore. It does not seem to exist. If I hover the mouse over it (in VBA) I get no response at all.
How can I get my Msgbox back please ?
Oscar
I have a form I use to search for clients when I hit a command button, using surname etc. I'd like a yes no button to pop up rather than the clunky ok button route I currently have. I'm a beginner with VBA and most this I've gleaned from internet.
If there are matching results, everything is fine. If there are no matching results, I've managed to get my desired messagebox come up by using the code below in the onload event of the resulting search results form, however the yes no buttons do nothing and the results form loads blank as though no records were found.
I'd like Yes to send users to the client input form, and No to return them to the search form.
Private Sub Form_Open(Cancel As Integer)
If Me.Recordset.RecordCount = 0 Then
MsgBox "Do you want to add a new Client?", vbQuestion + vbYesNo, "No clients found"
Select Case intanswer
Case vbYes
[Code] .....
Could anyone please tell me what is wrong with this event procedure? I get an compile error always. What I want is, if the condition is not met, the message box would pop up otherwise close the form. Please help.
Private Sub (Field Name)_BeforeUpdate(Cancel As Integer)
If (Me.MyFieldName = condition) Then
MsgBox "My Message"
End If
Else
DoCmd.Close
End Sub
Im want to create a msgbox that pops up when a parameter is entered wrong.
Ive created a query to search for customers - When run a box pops up saying 'Please enter surname' - If correct then a record appears.
If the surname is incorrect i get a blank table. I want a msgbox to pop up saying something like 'No Records Found. Please Try Again'.
Ive also created a button on a form which runs the query, this works fine:
Private Sub Command0_Click()
On Error GoTo Err_Command0_Click
Dim stDocName As String
stDocName = "Customer Search"
DoCmd.OpenQuery stDocName, acNormal, acEdit
Exit_Command0_Click:
Exit Sub
Err_Command0_Click:
MsgBox Err.Description
Resume Exit_Command0_Click
End Sub
How can i change this so a msgbox appears if nothing is found?
Any suggestions welcome. Thanks in advance... :)
In MS Access,
MsgBox "Are you sure", vbOKCancel
and there is OK , and Cancel buttons.
I want to do that if click "OK", then run the action, if click "Cancel", then cancel the action.
eg.
MsgBox "Are you sure", vbYesNo
If (vbYesNo = 1) Then
// run the action
End If
So, how do I edit it?
Thanks.
hi all
i have an event procedure with a msgbox using vbOKCancel.
if the user clicks cancel, basically i want to cancel the event. If the user clicks OK, I want to resume the event and complete the bunch of commands. What statements do I need to do this. I assumed that cancel meant cancel.... but...
I appreciate any help
Damon
I am trying to popup a messge box that has multiple lines.
I have three textboxes on my form
When I click the button I want a messagebox to pop up and say
ON FOUR LINES:
"Are you sure you want to update:"
Textbox value 1 [The actual value]
Textbox value 2 [The actual value]
Textbox value 3 [The actual value]
I am starting with this but am a bit confused...Any help woudl be appreciated...
Code:If MsgBox("Are you sure you want to update this?" + "THIS:", vbYesNo + vbQuestion, _ "Save Record") = vbNo Then MsgBox "DOING NOTHING" Else MsgBox "DOING SOMETHING" End If
I've included the following code for when my report has no data.
Private Sub Report_NoData(Cancel As Integer)
MsgBox "No data for report"
Cancel = True
End Sub
but when you click OK on the MsgBox, the code falls over within the form, which originally opened the report on the calling line with an error message "The OpenReport action was cancelled".
This is the line of code in the form....
DoCmd.OpenReport "My report", acViewPreview, acEdit
Any ideas how I stop this happening. Thanks.
I have a program that runs under access 2007 that I use at my work. We will soon be updating to MS office 2010 and the program will not work now because a calender file .ocx was removed from access 2010. Is there a way to get the 2007 .ocx file to work in access 2010?The program I am using is a relatively simple stand-alone and unsupported app that we use to request patient arrival and departure from various radiology tests inside a hospital. No reports are made from the app other than the number of patient transports for the day.
The app is placed on a common drive accessed from any pc in the hospital. No special permissions are required. But our app does use the calendar, time and date functions in access 2007. When I tried the app on a pc with access 2010, it basically says it (access) cannot open the app because a .ocx file is not present.Is there a way to make the access 2010 calendar file work in access 2007?
Is it possible to use a msgbox to fill in a control on a form?
View 4 Replies View RelatedI have 2 fealds ( Id and date ) they are primery keys in the table , I want to prevent duplacte id to the same date . ( MSGBOX after update the date )
View 7 Replies View RelatedHi, I have a formcalled Register and this table contains Name-of-Employee, Username and some other fields. The form searches the Register table when someone wants the register, and if the username is already taken up by another user, it gives a message box saying that the username is already used, and also it will give some suggestions as well. I want the MsgBox to take the first letter of "Name of Employee" and then put it beside the username, and show it as a suggestion. Here is the code I already have:
Dim d As Database
Set d = CurrentDb
Dim r As Recordset
Set r = d.OpenRecordset("Staff Login")
Dim h As String
h = Me.Username
r.MoveFirst
Dim flag As Boolean
flag = False
Do While Not r.EOF
If h = r![Username] Then
flag = True
End If
r.MoveNext
Loop
If flag = True Then
MsgBox ("This Username already exists" & vbNewLine & vbNewLine & "Here are some suggestions:" & vbNewLine & (Me.Name_of_Employee) & (Me.Username) & vbNewLine & (Me.Username) & (Me.Name_of_Employee))
End If
The code works perfectly up to here, but the thing is that I want it to show the first letter of "Name of Employee" beside the "User Name" and maybe the other way around.
Please help me as soon as possible, I am really in a great hurry
Thanx in advance
I just wanted to ask how to change the msgbox style, for example, put a Critical or Information picture on the side of the message box
Thanx in advance
Hi Everyone,
I have a message box that says "Backup complete" but it has an Ok button. Is there a way for the user to see the message and then close without hitting the ok button?
here's my code
MsgBox "Backup was successful and saved", vbInformation, "Backup Completed"
Thank you
I have a select query to search for a client. A box pops up and you enter the name, if the name is there, then that record is displayed.
Now if i enter a name that isnt there, then i get a blank table - which is fair enough.
I want to create a msgbox that pops up to let a user know the name they typed isnt in the db.
For example, "This Client Doesn't Exist - Please Try Again..".
How do i do that? :confused:
This seems like a dumb question but for the life of me, I cannot figure out how to do it.
I want to display a message box when a form is opened and displayed based on some test done in the Form_Current Event. However all the code in the Form_Current event is fired off before the form is displayed. But I want the form to be displayed first.
The MsgBox is modal so the form isn't displayed until I click the OK Button on the msgbox.
How can I display the form first and then display the MsgBox?
Thanks in advance for your help! :cool:
Good morning,
This should be simple but I just can't get it to work.
I have a form which has different account numbers and a percentage is alotted to each account number. Trying to create an unbound calculation that if it exceeds 100% a message comes up. My current code is :
If (Me.PercentTotal > 100) Then
MsgBox "The total percentage cannot exceed 100%", vbCritical, "Check You Numbers"
End If
Can't seem to get this to fire.
Thanks for any help you can offer.
Jerry
I would like a MsgBox to pop up at 2:00 everyday similar to a outlook reminder.
Send in the 2:00 Report.
Is this possible?
Hope you guys may be able to help
I have a form with a sub form. On the sub form I have #Ordered, #Supplied & #Used. These fields calculate to give the user the # in stock. This figure is displayed on the form. On the form I also have the Reorder level which is set by the user.
I would like to be able to make a message alert pop up when the database is opened or when any of these records show the # in stock is lower than the Reorder level, ensuring that we do not run out of stock.
Many thanks for any help you can give.
I have a field on my form which I want to display a message box when something is entered.Private Sub BoI_AfterUpdate()Box = Msgbox("Is the booking date at least 7 days before the hiring and no more than 8 weeks in advance? If so, click Yes, otherwise, click No. You can check the calender on the Open Form under the 'Miscellanous' tab to check the date. Thank you.", vbYesNo, "Validation")If Box = vbYes Then Cancel = FalseElseCancel = TrueEnd IfEnd SubThat's my code, but I get an error after I type something in that field (BoI)."Compile error: Else without If" I have tried it with 'ElseIf Box = vbNo Then Cancel = True' but that also gives the same error.What's wrong with it?Thanks in advance. :D
View 4 Replies View RelatedHi, I'm a little confused here. I'm using the following on one DAP and it works just fine. When I add it to another page, it does not work. Any ideas?
<SCRIPT language=vbscript event=onclick for=Save>
MSODSC.CurrentSection.DataPage.Save()
msgbox "Record Saved - you may continue to edit or exit your browser.",64,"Saved"
</SCRIPT>
Thanks...Doug
hallo everyone,
is there anyway to create a msgbox without OK button i.e., is there any way to display a window to show "data processing..." and then close it after the processing completes.
thanks in advance.
regards,
aravind.s
is there such a thing ? that helps you build the msgbox of your choice then gives you the code to support what you have designed?
is there an addin or wizard about to do this ?
if so where can i get it please
Andy
Hi!
I am trying to insert a very simple SQL string in a very simple VBA code... what is the simplest way to do this??
MsgBox ("strcount" & " entries found.")
(This Message box pops up before a query is executed)
where strcount = "Select Count(*) from Q_Paint"
Any help is appreciated...
I have 3 text boxes on my form, which data is inputed to and then on a click of a button, is transfered back to by table to store this data.
problem is that the user entering the data keep putting in the wrong figures in, by this i mean instead of inputting 12345 they often put in 1234 abd leave the 5 offobviously giving us a duff figure.
i want to have a meassage box to appear to ask the question if the figures are majorly different.
my 3 boxes are called:
[impressions(a)]
[StdPack(b)]
[Output(c)]
i need help with the following statement please:
logic
if the stdpack(a) is more than or less than 6000 [impressions(a)]
msg to appear
"the standard pack is considerably different to the impressions, is this correct"
yes/no, if no get focus on [StdPack(b)]
logic
or if the [Output(c)] is more than or less than 6000 [impressions(a)] or [StdPack(b)]
msg to appear
"the [Output(c)] is considerably different to the [impressions(a)] or [stdPack(b)], is this correct"
yes/no, if no get focus on [StdPack(b)]
if yes to either msg box continue as normal
i need all this to be run on the lost focus of [Output(c)]
please help
Andy