Hello.
I'm trying to write a database for basic manual tests.
Each test has multiple steps.
My problem is: How do I replace the step details when my user has clicked "next step" without losing any of the other information present on the form?
Thanks
Katrina
I have one-page forms which print a second page, blank except for a block of grey shading at the top. I have tried moving the content of the form up but that doesn't eliminate the second page. If I look at print preview, every second page of the entire database shows up as blank, regardless of where that happens to appear in the record.
View 2 Replies View RelatedHello I am new to Access and slowly finding my way round.
I have built 30 queries which eventually build two Union Queries of which each query as a slight different criteria.
In all 30 queries there is an indentical Field name called Arrived. What i want the user to be able to do is change the criteria in the Arrived figure throught a message box. So far the criteria is in the field is:
>=date()-3
This will show me everything 3 days ago. What i want to do is to let the user check what happened 5 days ago 10 days ago. I know i can create the following to solve the message box:
>=date()-3-[Enter in the days less than today]
Is there away to update all 30 queries at once with the same code?
Hi There, first time on here, so hopefully i can get an answer to my problem.
i am trying to split data in a sigle column accross multiple columns. basically i have a table like the one below:
Member DATA
A 34
A 65
B 234
B 456
B 22
C 88
X 6
X 34
Y 23
Y 353
Y 25
Y 9
Z 45
so what i want the query to do is to show a list of Unique Members, and then split the data column so it show an entry for each Member accross mulitple columns.
is this possible? i have very limited access knowledge, so a comprehensive answer will be very much appreciated.
Hey guys, my problem is this:
I want to run a query that runs off of two list boxes on a form. However, I want both these parameters to filter a single field in my query. Why I want to do this is I have several types of accessories made by several manufacturers, both included in the "Description" field. I don't want to include an entirely new field for manufacturer because it's only 4 out of about 5 items that need this.
Is there a way this can be done or will I be forced to include a manufacturer's field.
Thanks in advance
Nathan
Hello,
I am trying to create a listbox that shows "calculated" dates for a two week payroll. I have a field in a table that is set to a start date (05.31.05) and another field that specifies the number of days between dates (14). I would like set a listboxes recordsource to show the start date and then calculate the next 4 dates using the first date (05.31.05) and the range (14) without actually storing any dates in the table. I can figure out how to do it if the values are stored, but I just want to know if this is possible to get the results another way.This may sound crazy and unecessary, but I want to know if this is possible without storing values in the table.
Listbox values:
05.31.05 - (first date from table)
06.14.05 - (first date + 14)
06.28.05 - (first date + 2*14)
07.12.05 - (first date + 3*14)
07.18.05 - (first date + 4*14)
Is this possible? HTMS. Thanks.
I am trying to make a user friendly form where the user can select mulitple items from a list box and then from that selection this info is listed in another table (Form) where they can add additional info.
For example,
List box lists Products to be made (1,2,3,4)
If I choose item 3 and 4 i want them to be listed in a seperate form where I can add more info (quantity).
Any help or other suggestions is appreciated.
I have created a form in access that contains a multiple select list box and a command button "New Record," that creates a new record. I select values in the list box for the current record. When I click on the "New Record" button, the values that I selected in the previous record are still selected. How can I reset the list box so that no values are selected when I create a new record?
View 8 Replies View RelatedI have a report which includes several subreports. There will be times when a subreport prints partially on one page and completes on the next. I don't always want to break to a new page with this subreport. However, I would want to break to a new page if the subreport cannot fully print on the current page.
View 3 Replies View RelatedI have a report that lists states and cities within the states. When a state name happens to be at the end of the page the individual cities appear on the next page with no State heading. I solved the second page problem by setting the "repeatSection = Yes" in the Section Header (though I haven't shown that in the example below).
But the previous page (which just shows the State Name and no cities looks dumb. Is there some sort of solution.??
(Actually I would also like any State that continues to a next page to not just have the state name but something like
" Colorado (Continued)" Is there anything I can do in VB to make a page break if the section is going to print but therer isn't enough room for one detail line?
This is what I currently see
Alaska
Ancorage
Prudo Bay
California
Whittier
Anaheim
Colorado
------------------------Page Break ---------------------------------
Denver
Pueblo
Colorado Springs
Deleware
Dover
-------------------------------------------------------------------------------------------
Thanks !
If I have a report and it has controls (labels representing column titles) in the page header. Now when I print the report - if it happens that the last page has no detail records - but there is text boxes and so forth in the report footer. Is there a way to not display the page header on the last page?
I have a report where the last page shows the page header - and the field/column labels on the page header - but for which there is no detail records left to display - on the last page. There is report footer information that should display. It just looks weird because the field/column labels show at the top of the page - but there is no data remaining to print under them on that last page.
Hi All,
I have a data access page needs a filter by a dropdownlist, the dropdownlist used is a html control and I use javascript to filter the data programmaticlly in the onchanged event of the control.
MSODSC.DataPages(0).Recordset.Filter="AppID = 3";
My problem is, when this statement runs, the page refreshes. But I don't need the page refreshes, it set the dropdownlist text to the default text, not the value user select. The browser is IE7.
How can I stop the page refresh itself?
Thanks and Happy New Year!!
I have a report that should only show 1 page yet I have 2 and one is blank . I cannot find out why?
View 3 Replies View RelatedWhen I open my form, it doesn't open at the top of the page. How do I get it to open up at the top, so that I do not have to use the scroll button to go up to top?
View 3 Replies View RelatedI'm trying to deactivate the page down key in my form with no luck. How to deactivate the page down key. Here's the steps I have already completed.
I opened the form in design view, set KeyPreview Property to Yes, selected Database Tools, Visual Basic and inserted code in lines 3 through 9 after the dash / line.
Update_Total
'
'------------------------------------------------------------
Function Update_Total()
On Error GoTo Update_Total_Err
Private Sub form_keydown(KeyCode As Integer, Shift As Integer)
Select Case KeyCode
Case vbKeyPageDown
[code]....
I have a form with records in chronological order, as this has hundreds of records I would like to open the form and go to the bottom of the form to display the most recent records by date in the window, I know I could invert the order of the records displayed but I rather have them sorted by chronological order 1->999.
View 4 Replies View RelatedI am trying to create an invoice report. I want to add all the costs from the detail section in my footer. I have accomplished this in either the Report footer and/or the page footer, but the problem is that the report footer doesn't go to the bottom of the page, and the page footer doesn't go to just the last page. I have tested a bunch of suggestions that don't seem to work.
1. Print page footer with Report header = NO - only works if your report is two pages or more.
2. Private Sub PageFooterSection_Format(Cancel As Integer, FormatCount As Integer)
If Page = Pages Then
Me.[TextBoxName].Visible = True
Else
Me.[TextBoxName].Visible = False
End If
End Sub
The Page functions worked, but it did not change the results from page to page. If it was a two page report, then the if statement is false and the text box was not visible on page 1, but it also was not visible on page 2.
to automatically create a second, third, fourth... page depending on how many characters are in the narrative. The only other thing needed to be changed is the page# of Page#.
So right now my form looks like below
CAD#
Person name
Charge
Narrative
"
"
"
"
"
"
"
"
"
"
"
"
"
Officer name date page # of #
Thanks in advance.
Matt
Hi All
I have added the Allen Browne Calendar 2k control to my form.
My form consists of 4 pages. On pages 2 and 3 I have subforms and on page 4 I have Personal data. Page 1 is general data and the Calendar is on Page 1.
What is happening is that the Calendar is also being displayed on my 4th page, in the same position as page 1. When I try to move it, cover it or delete it from page 4, it is also gone from page 1.
Any suggestions please?
Many thanks
Tee :(
I've used the following code on the footer on print procedure:
Private Sub PageFooterSection_Print(Cancel As Integer, PrintCount As Integer)
Me.PageFooterSection.Visible = (Me.[Page] = 1)
End Sub
This works fine when you view it in print preview, but the footer don't show up at all when you actually print it.The reports default view itself is set print preview.
I have made a report on my query. The page setup is all around merging 0.2" and page size A4
When i view this report in preview it looks all my data whatever i want in a page but after every page it will generate a blank page.
I have included my report.
I made a blank form, created everything on my form then added a header to put the title etc in and tried to view it using form view and the header isn't appearing. What do I need to change?
View 1 Replies View RelatedWhenever I open this form I get this message. Form opens a web page.If I open that web page with browser I don't get this message.
View 2 Replies View RelatedI have a database with a form and a sub form it works great. However I needed to add a tab or page to the sub form when I returned to the form view the sub form is there but you cant see anything. change back to design view and its there. I didn't change any properties on the sub form. and If I delete the page I added it works just like it did before I added it. also the sub form is linked to the main form master and child. would I have to link the tab also??
View 3 Replies View RelatedHere're something I want to achieve in my database (Access 2010):-
1. To create a login page
- The table “tblUsers” has been created.
- The login page will be popped up once the database is opened.
- The user1 will be set to be an administrator who has the right to edit the info and the structure of the database. (User1’s password: 1234)
- The user2 will be set to be an end user who will be responsible to create a quotation request through the form “frmQuotationAllinOne”. (User2’s password: 5678)
- The user3 will be set to be a supervisor who will be responsible to approve/reject/give comments to the quotation request. (User3’s password: 2468)
2. Welcome note
- Once the login procedure is done, the Welcome note will be popped up.
- Under On Load event, I have keyed in the event procedure. It worked sometimes and sometimes not. It seems that the Access database is not performing consistently and stably.
I want to add a page number to a form in MS Access 2010. How do I do this ? There is no page number icon in the control group when I'm in design view.
View 1 Replies View Related