Multiple Access To Linked .txt Files?
Feb 8, 2006
We've had a problem for quite a while with regards to multiple users being able to view/run, queries/reports at the same time.
If someone is running a query/report, and then someone attempts to use any other query/report that’s already using the linked .txt file they get the error message:
The Microsoft Jet database engine cannot open the file ". It is already opened exclusively by another user, or you need permission to view its data.
I've read various posts with regards to user rights to the folder which the DB is stored, which isn't the problem in this case (we have tested and set user access to all read, write, delete etc).
I've also read that .txt files are managed in a different way than most other file types, in that DOS controls user access rather than jet?
So my question is:
Is there a way round this issue with linked tables that use .txt file as there source?
Thanks
Darren
View Replies
ADVERTISEMENT
Jan 23, 2004
I'm trying to link .DBX files to an ACCESS database. My problem is that the Dates are in this format. "20040123" and times are in "730" or "1630" and, all fields are TEXT. The Database is being used to help analyze production times and employee dates worked, so you can see I need to be able to perform calculations on these fields. Is there any way to translate them to Dates and times that ACCESS understands?
Thanks
Bear
View 2 Replies
View Related
May 3, 2013
What is the strategy for doing this rather than the code (if it's possible)? I can code a fair bit of VBA in excel but I'm not too sure about what I'm doing in Access.
View 1 Replies
View Related
Mar 3, 2006
Hi I have a few .csv files that i would like to upload into an access db. I saw an example for DTS, but since i dont have sql server i can't go that route.
Since i have some .csv Files where the file name changes on a daily basis, is it possible to upload them all with some wild card function. there is already a table with the fields already predetermined, and all i basically have to do is just load them all up at once.
please let me know if you have a solution.
View 2 Replies
View Related
Sep 9, 2014
I have parameter form that ask for state and begining date. on click it runs a query and creates a report by state that has multiple pages.. I want to create a separate pdf file for is page (which would be by delegate_name).
This is the coding I have so far and am gettting the error '424' object required. This is the coding I currently have. I haven't worked with access in over 9 yrs so am a little rusty with it.
StateAbb = Me.State
PeriodStartDate = Format(Me.Period_start_date, "MM-DD-YYYY")
Dim strSQL As String
Dim db As Database
Dim rs As Recordset
Dim strRptName As String
[Code] ....
View 14 Replies
View Related
May 21, 2015
I have a basic access query (MACs Report Template) that I need to export into multiple excel files based on the 1st field (Plan ID).
Example:
PLAN ID
Number
Amount
Status
AM141
12345
100
Disconnected
AM141
54321
5000
Active
AM142
11122
2000
Disconnected
AM155
22334
500
Disconnected
I need this to create a spreadsheet for each unique PLAN ID. Ideally i want it to export the following:
MACs Report AM141 20150521.xls (both records above should be in this report)
MACs Report AM142 20150521.xls
MACs Report AM155 20150521.xls
View 3 Replies
View Related
Mar 25, 2014
I have a lot of Excel files and each of them has 3 sheets that I would like to import in Access 2010. How can I import them without having to do one by one?
I always get error on
Code : Application.FileSearch
View 1 Replies
View Related
Jan 23, 2008
Hello,
I have some data in excel which I am importing it into MS Access 2002. Each excel file (one worksheet per file) is imported into separate tables.
I want to combine all my imported tables into one table. Is that possible, if yes then how and if no then what can be done to get single table after impoting data from various excel files.
Cheers,
Mandeep
View 14 Replies
View Related
Jun 19, 2012
I have linked excel files to my access database and wrote queries for data retrival. Now the problem is, when i open the linked table in Ms Access or run a query, I am not able to open the excel file at the same time. It says, "this file is in use. try again ".. Is there a solution that i can open the excel sheet while it is open in Access?
View 1 Replies
View Related
May 4, 2006
I've been looking around and have found some posts that pointed me in the right direction, I just can't get it to work. What I have is 37 excel files of competitor cross references. There are 2 columns in each excel file, our number and their number. I have inserted them as a linked table in the db. What I want to do is create a form that has a field for every part number and make all of those fields a search field. That way they can type in any number and get all numbers back. I have created a query but once I get past 4 linked excel sheets then I get errors about a type mismatch in expression. Also I can't get the form fields referencing the query to show up when I open it. If I leave the query at 2 or 3 fields and use [Forms]![CrossRef]![txtItemNumber] in the criteria of our number in the query, it works. I get a window that pops up when I just open the query asking for a number, I type it in and the query returns the number and competitor numbers. Am I doing this the hard way?? Thanks for any ideas...
View 1 Replies
View Related
Feb 2, 2012
I have a database with a number of linked tables that are linked to tables in different databases (not a back-end).for example, I have table1 that is linked to table1 in K:databasedb1.mdb.table2 linked to table2 in S:datadata.mdb.and so on...
However, recently we have moved all our databases to a new location.
K:databasedb1.mdb is now residing in O:masterdatabase
and S:datadata.mdb is now residing in O:masterdata
and so on...
I'm now in charge of relinking all those tables to point to the new location.I would do this in linked table manager one by one but we have 100s of tables linked to multiple different databases in different location.is there a way to create a VBA code that will automatically do this re-linking process?
so,
1. find unlinkable tables
2. search its new location under O:master
3. re-link it to the new location
Database names and tables names have not been changed. Just the location of databases.
View 5 Replies
View Related
Sep 20, 2014
I made a database that in one of the forms, I like by clicking on a button the user be able to select 5 excel files with different file names (in the same directory) and then based on the imported file's names, it be stored in 5 different tables.
At the moment by using the bellow code, I can import multiple files (with the same formats) only into one table . My vba code comes as follow:
Function GetAllFiles()
Dim fd As Object
Dim strFilter As String
Dim lngItems As Long
Const msoFileDialogOpen As Long = 3
Const msoFileDialogViewDetails As Long = 2
[Code] ....
View 4 Replies
View Related
Aug 1, 2013
I am trying to build a newer database 2010, based on an older one,2000, that has been locked tight and I cannot see the modules to kinda get a reference of where to start. I am trying to find a VBA code that will allow me to import a several text files to one table. The text files are all in the same format but I cannot remove the page headers and footers to get the table to look right. I have attached an example of the text file i am trying to import but it is a stripped down version for information protection.
Also, it appears in the old Database Table once imported as:
J.Smith 1234 01 ABCD ABCD HGJV 2345 ABCDE ABC6 Qual Date Date
J.Smith 1234 01 ABCD ABCD HGJV 2345 ABCDE ABC6 Qual Date Date
J.Smith 1234 01 ABCD ABCD HGJV 2345 ABCDE ABC6 Qual Date Date
J.Adam 1234 01 ABCD ABCD HGJV 2345 ABCDE ABC6 Qual Date Date
J.Adam 1234 01 ABCD ABCD HGJV 2345 ABCDE ABC6 Qual Date Date
J.Adam 1234 01 ABCD ABCD HGJV 2345 ABCDE ABC6 Qual Date Date
If I could import the text files and end up with a table like this, it would be all i need as i could run all the queries i need from this.
View 3 Replies
View Related
Nov 14, 2005
Does anyone out there know how I might do the following:
I have a main folder which contains many sub-folders. In turen, each subfolder contains several files. I am interested in creating a text file that within each sub-folder will list certain files in that sub-folder. Example:
"Main Folder"
"Sub-folder 1"
FileA
FileB
FileZ
"Sub-folder 2"
FileA
FileB
"Sub-folder 3"
FileA
FileB
FileZ
Pseudo-code:
Read Main Folder
Do While Sub-folders exist
Do while selected sub-folder contains files
If selected sub-folder contians FileZ then
Write selected sub-folder name to text file
Write time/date stamp to text file
else
loop to next ub-folder
end if
end do while
end do while
Close input and output
Any help offered is greatly welcome. Thank you!!
View 7 Replies
View Related
Dec 12, 2013
I decided to link Excel files and all is running fine except when I run a query on the file I get about 1,041 blank rows before my data is displayed in the query's datasheet view or any report based upon this query... the data seems good but why the leading blank rows? The data in the linked Excel sheet does not look like this and another Excel file's query looks fine and they seem set up identically!
View 2 Replies
View Related
Jan 30, 2008
I think this was covered a while back and I did a search and couldn't find anything on it; Is there a way to attach and send multiple report .snp's to one email. I've been using SendObject.
thanks -
View 14 Replies
View Related
Jan 7, 2005
Hi, I'm new to Access, but I think I've been doing fairly well. At my job, we use multiple Word tables and excel spreadsheets to keep track of information on journals we subscribe to. (I work in the periodicals/serials department of the university library.) We have a LOT of journals and a lot of information on each one.
I have already imported our "superholdings" file, which includes the names of the journals and a few bits of information on each one. What I want to do is import other bits of information from the other files into that same table. I tried importing the files into the existing table, but rather than merging all of the data for each journal title, it simply added the new records to the bottom. I tried importing the files as new tables and joining the tables with the title fields, but that didn't do what I wanted.
Really, I just want to merge all of the data. If the Title's match exactly, then I want all of that information in one record for that title. I have been VERY consistent with field names.
I'm new to Access, but I learn fairly quickly. I notice on this forum (I've read a LOT of the posts looking for answers to this question, and got answers for other questions) that most of the solutions involve coding or programming of some sort. I have NEVER done this in access. If the solution to my problem involves this, please tell me where I'm supposed to type those commands. I'm somewhat familiar with softcode (from a mux (talker environment) I started frequenting in college), but never have programmed anything. (Not since basic on our old IBM XT!!)
Okay, an example is forthcoming, once I figure out how to do it in this little window.
Thanks,
Siena
View 8 Replies
View Related
Mar 10, 2008
Hello All,
I am trying to export a query to multiple .csv files.. For example...
Export1.csv = rows 1-1500
Export2.csv = rows 1501-3000
Export3.csv = rows 3001-4500
and so on until all rows have been exported...
Anyone have any idea what the best way to approach this is?
I'm sure many people will find this usefull because some exports can be over the 65000 limit of ms excel.
View 4 Replies
View Related
Apr 4, 2014
We've got a software that is creating a mdb file with one table and 10 columns. Every day we have around 30.000 entries in the table. At the end of the week we have 7 different mdb files and usually we copy/paste them into one single file to do the base research. Everything is fine until the mdb's file size is 2GB. I understand that mdb files start behaving strange with files over 2GB of size. Therefore after a couple of months we have several 2GB mdb files. When doing a history research we have to open each and every file to check and search in that file. That can take a lot of time if you have 20 or more mdb files.
What I am asking is ... if there is a possibility to merge all the 2GB files into one or maybe more so that the research wouldn't take so much time.
View 2 Replies
View Related
Jul 19, 2005
I have been given the task of setting up a database which will store data which I will receive on a month basis, I have managed to import some csv files however, I will be receiving well over 200 csv files each month. Is there a way to import these multiple file.
The filename save structure is as follows: areacode-Jul 05data.csv
areacode represents each different area.
below is a copy of the csv file.....
View 2 Replies
View Related
Aug 1, 2006
I am trying to import several txt from a directory.
The following code is on a button in a form:
Private Sub ImportData_Click()
Dim myfile
Dim mypath
mypath = "G:FinanceAccountingRoyalty2006exports3rd QTR 06JUL 06 est"
Do
myfile = Dir(mypath & "*.txt")
DoCmd.TransferText acImportFixed, "import_data", "tbl_import_tables", mypath & myfile, False, ""
myfile = Dir
Loop Until myfile = ""
End Sub
The problem is this causes a infinite loop
Can anyone help?? Thanks
PS This code was from previous posting, where the transfer was excel files.
View 5 Replies
View Related
Jan 16, 2008
Super new to the forums and hoping I can find an answer here.
After looking for an hour or so on Microsoft's site, I gave up and decided to venture into new resources.
My ultimate goal is to create a form that will prompt a user to select a Microsoft Excel file and then run a macro. The macro should import the Excel file into a single table based off of what form is being run. The idea is to have a single form for each employee of a specific department and have the form import information that is stored on our phone server into access. I've set up most of the macro but the argument section of the filename is what's hanging me up.
So finally my question;
Is there a way to have a macro run to specify what file you want to import when using an additional macro? Am I going about this the completely wrong way and should stick to VB Code?
I look forward to your responses, thank you in advanced!
View 4 Replies
View Related
May 15, 2014
Basically what I am trying to accomplish is uploading multiples file automatically into server. The code I am trying to use works great if the user wants to upload a single file manually because the code prompts you to choose the file and I am wondering if there is a way to tweak the code. here is the code I am using
Code:
Private Sub Form_Load()
Dim objFTP As FTP
Dim strfile As String
[Code].....
View 3 Replies
View Related
Jul 8, 2013
My report has tens of pages and I need to save each page as separate file with ID as filename. PDF prints with ID but all in one file. I use this code.
Option Compare Database
Private Sub tisk()
Dim cesta As String
Dim kod As String
Dim Sql As String
Dim rs As Recordset
[Code] ....
View 5 Replies
View Related
Sep 7, 2013
I've been asked importing about 50 - 60 .DBF files into an Access database daily - and processing the data in Access to specs I don't have yet.
I'm pretty comfortable doing whatever once I have the data in the Access Database.
View 8 Replies
View Related
Jun 22, 2007
I have 100 or so 2-sheet excel workbooks. I need to import them all into an access table for analysis. They are all exactly the same format/layout etc but obviously have different data in them (they are customer satisfaction surveys). I only want to export 1 out of the 2 sheets on each workbook (the other is a front end, the data sits behind in sheet 2).
So, at the moment I have to go to 'get external data' > 'import' > select excel and then double click each file individually and then go through the import wizard. Now, I can get them all into one table but it's clearly time consuming.
Is there anyway of doing a batch import of multiple excel files to cut out the manual work described above? Or can anyone suggest a lateral get around?
Any help much appreciated. I should say that I am running excel 2003 and access XP (2002)
Matt
View 5 Replies
View Related
