I try to call one database forms and tables into another database without creating tables and forms.
Database where (target) i need to open forms and tables:
insurance.mdb (In the same database I click on TOOLS - REFERENCES and add accountreceivable.mdb as i need all forms and table from that database)
Database from where (source) i need forms and tables
accountreceivable.mdb
I try to call forms and tables from accountreceivable.mdb into insurance.mdb. Do i use the below function in insurance database to open tables and forms from 2nd database. If i do where should i write this function i mean in the module of insurance database or in the module of accountreceivable database. How to i call that function
Function OpenForm(byref vformname as string) as boolean
docmd.open vformname,,,,,acdialog
Hoping someone may be able to point me in the right direction.
I've got several databases used for different tasks, in which I just added an hyperlink to them from a front end database. All my team could access any of the data bases at once. It was using the WINNT/MS OFFICE mdw file.
Since my last question, I've now managed to set up a MS Workgroup Administrator file, which is on a shared drive. Everyone has joined this workgroup, and when people logon it now greets them with their name and records their name against any tasks. Thanks to everyone for their help with setting this up.
But since I created this new workgroup, we can't access more than one database at at time. It comes up saying 'mdw file is in use'. However, one person in the office can. I've looked at all the setups for individuals, and can't see any difference between ours & this one individual.
Ok, this is only a very general question, but I'm hoping somebody here can give me some general advice.
Basically, I have three separate database which I've written for my company. They were all written at different times, hence the fact there are three and not one that does three things. The first is used to raise, edit, delete, and track RMA records for returned merchandise. The second is used to raise, edit, and track Training data for people who have undergone my training course. The third is my main database that contains all of my clients' details, plus a log of all calls taken from them. This is the largest and most complex of the databases and has some fairly advanced relationships setup to enabled hundreds of call logs to be linked to a single record of necessary.
Now all three databases have been written using the same kind of structure. They all use popup modal forms to prevent malicious/accidental damage to the database by the staff who use them. They are all locked down and Access cannot be broken into whilst they are running. they all also have their own primary keys.
All these databases work just fine, but I'm now a little tired of each staff member having three shortcuts on their desktops, depending on which database they need to use. what I'd really like to do is somehow merge all three of these databases into one single database, and alter the switchboard accordingly to allow users to access any of the three parts of it.
The problems - as I see them - are: (a) that my main database uses a lot of relationship links to maintain certain records, whilst the other two use none, and, (b) that each database, having been written separately, has records with their own ID keys and autonumbers.
I did toy with the idea of having some kind of function on my main switchboard that would allow me to close the current database being used and open another, all without closing Access, but I haven't been too successful in my tests...
...so, my question is, does anybody have any bright ideas as to how I can go about merging these three, or, at very least, centralising access to all three?
I'm hoping someone out there can help me out with a problem. I work for a company that creates websites for car dealerships. The process involves me inputing data to a standalone program which creates a database for each dealer. When I upload the information, the program I use creates an inventory.mdb which is accessed through the asp pages I have. examples of finished product are: http://maconsales.com/freedom/inventory.asp http://maconsales.com/freedomnew/inventory.asp
We currently host about 13 dealers. What my boss is wanting me to do, and I'm having problems doing, is making it possible for someone online to visit our main site and view all inventory from all dealers without having to leave our site to look at each individual inventory. And I would like to do it without having to manually create a central database with all the inventory we have, about 1400 vehicles.
Is what I'm trying even possible? or am I looking at a long night of data entry?
I've inherited an Access Application which has (1) a number of linked tables that are used to seed the underlying SQL Server database.
This system has been set up and is working in Development. My task is to move it to UAT but with regards to point (1) above I can't see any alternative but to copy the Access Database, create a new System DSN and re-import the External Data from the new DSN. What I'd like to do is use the same Access Database to point towards DEV or UAT or PRD. Is this possible to do this or am I stuck with maintaining 3 different Access Databases ?
I am a developer with many years of experience but my Access knowledge is limited so any pointers would be helpful.
I inherited an interesting problem. I have 3700 tiny MDB files all of which contain the same table (same name, field structure, etc.), but different data. Each database has a slightly different name. It's the result of XML data mining.
I need to combine these 3700 tables from these different databases into one table in one database.
I can't see any way to automate this and as it's a one-time only project I don't know whether it's worth trying to automate it or if I should roll up my sleeves and just start apending tables.
I have around 10 mdbs and in each I have 4 tables, I want to add all the tables from 10 mdb to one mdb, finally I will have 4 toal tables, right now I am using a appendquery to add tables. Is there way using VBA I can do it on the form and with one click of a button I will be able to add. Thanks for any info..
Hi all, i hope this is posted in the right place first of all :) apologies if not..
I have about 8 individual databases which will be used simultaneously by users. I wish to be able to have full control over these databases from a 'master database' including being able to delete the data in there (possibly import fresh data but not 100% needed) and export data to be analysed in Excel etc I figure this can be done with access but if i'm on the totally wrong track i would be appreciative if someone could give me a push in the right direction..
If any more infomation is needed then let me know.
Does anyone know if it is better as a general rule (server performance wise anyway) to connect to a single database with many tables or multiple databases with fewer tables??
In this case I have a small calendar database and large navigation/metadata database -- both are MS Access & connected to the same ASP page.
I have one Master database and multiple child databases in a folder. Each of these databases (both Parent and Child) have identical table called "source". I need a VBA code which will consolidate tables of child database into the Parent database table.
I maintain a simple Access database which about 30 other users have open every day and use it solely as a reference book. It is simply a large reference 'toolbox' with one form and many many sub reports in the form with links to refference guides for my users. Very often I need to add new reports and just new content overall to the database. My current process is to
1) make a copy 2) modify the copy with all my new content 3) Send and email with the file attached telling all 30 users to delete their old database and use this updated version.
Of course we have many issues including:
1) The files are very large in Lotus notes (is there a way to make these files a lot smaller) 2) Seems like a waste to delete and replace an entire database when only 1 or 2 minor links need to be changed every time. Is there a macro or some code I can create that would act as a patch where the 30 users can run the code and it will change hyperlink paths that I needed changed, report content or anything that needs changing.
gets around having all my users copy and replacing their database toolbox on their desktop. We all work out of a shared network drive so I can have them use the database together in a shared drive but its litterally impossible to have every hand out of the database all at once so I can go in and update, it just does not happen so if there is a work around for getting all users out of the DB, it could avoid having to do anything else.
I'm scanning bar codes into the record search box, most of the time it works as it should but occasionally I get multiple "cannot open any more databases" errors. It still finds the product record but the error messages are super annoying. I am sure to clear the memory on the scanner each time before I scan in a new barcode but it doesn't seem to matter. Also sure to only have one or 2 forms open at a time, that doesn't seem to matter either. Most of the time I don't get the errors but when I have to click through like 10+ error messages (all identical). I only have one database open so I'm not sure what it even means. Also I have tried this in 2 different forms and it's the same for both forms. Seems like I get the errors in my initial scan and then after clearing them it seems to work without errors.
I have a database with a number of linked tables that are linked to tables in different databases (not a back-end).for example, I have table1 that is linked to table1 in K:databasedb1.mdb.table2 linked to table2 in S:datadata.mdb.and so on...
However, recently we have moved all our databases to a new location.
K:databasedb1.mdb is now residing in O:masterdatabase and S:datadata.mdb is now residing in O:masterdata and so on...
I'm now in charge of relinking all those tables to point to the new location.I would do this in linked table manager one by one but we have 100s of tables linked to multiple different databases in different location.is there a way to create a VBA code that will automatically do this re-linking process?
so, 1. find unlinkable tables 2. search its new location under O:master 3. re-link it to the new location
Database names and tables names have not been changed. Just the location of databases.
I'm creating a database that keeps track of printing jobs at a printing company... I started my project by drawing out how I want the databases to be configured.
I was going through a book that was made for access 2000, but I need to create this in access 97 because that's what the company has on their computers. One of the features in Access 2000 thats not in 97 is subdatasheets...
Basically, what I want to do is for each printing job, there can be a bunch of different tasks that need to be completed and billed for. For example, on one printing job, they need to design a logo, and then they need to print it out and send samples across the globe, and then they need to create a pdf, etc. This is going to be different for each job.
What I figured I would do is create a separate table to take care of all of the different tasks that are related to each job. This table would have the primary key of the job from the main table for each individual job, and then they would be related in a one (MAIN entry) to many (tasks) relationship.
Is this correct in how I want to do that? How will I do this inside a form, I want them to enter the information in table that expands as they put more tasks in?
This might be a very simple question, I just want to know if I'm going in the right direction.
I have been reading a lot about splitting databases on this forum. I still have some questions. 1) Will the FE (Front End) still show the tables? 2) Will users still be able to edit the forms, reports, etc.? 3) Will my code be hidden 4) Will all the users have up to date data showing when they open the Database? 5) Can more than one person open and input data in the database at the same time?
I also want to make an MDE copy, do I split first or make the MDE and then split?
The whole point is the following: I want the people (maximum 10) that will be using this database to only be able to do enter and view data. They should be able to generate the reports but not create new reports. I only want ONE person to be able to edit the forms, code, and reports. How would I do this.
Forgive me if this is in the wrong forum, so MODS, do what you will.
I'll come out and admit it right now, I'm a newbie here and have just started using Access2003. I'm in a city government so I need other users to be able to view and access my database, BUT I don't want them to be able to edit or change things. I want to be the Owner/Administrator of the database and no one else. I want to be the only person that can make changes.
Is this possible in Access 2003? Can other users only open it in Read-Only format but when I open it, it's editable?
I am new to Acess, I am trying to merge 2 Access DBs and am not sure of the steps to accomplish this, if it can be accomplished and/or are there any tools to reach the same goal.
I have an MS Access database on a server which acts as a back end, with about 30 users using the data. They each have a copy of the MS Access front end located on their PC's.
Every time I make a change to the front end, I have to redistribute the new version to each PC.
What I am wanting to do is put a single copy of the front end on the server, and adding a shortcut to this front end on everyone's PC's. This would allow me to make changes to the front end without having to redistribute to all users.
What I was wondering is, if I put a single copy of the Front end on the server and simply shortcut to that front end, will it cause any problems, or are there any issues that I should look out for?
I have a Form that refers to two Reports, both of which refer to two query's one for each. the whole lot(1 Form, 2 Reports, 2 Querys) is in one mdb file and the actual database is another mdb file. How do I get my objects to get their data from the main Data Base File? the 5 objects are acting as a small report making application.
:confused: Does anyone know if there is any way to link to seperate databases so that any information entered in one will update the same information in the other and visevirsa?
My company has a database. I downloaded a copy of it to my desktop to work on it. Can I integrate my changes to the original? (copy/paste,export etc) I hope so.
I have three different databases, engineering, properties, and my contacts. I would like to have one switchboard that I can put on my desktop to access all three databases. Is this possible?
This post is really aimed at someone that has experience of network databases and the problems they can pose but if you can help at all that would be great!
I work for an insurance company and we have created a database for registering complaints on. The one we currently use is a single .mdb file which can be shared by up to 60 people at any one time. This is creating a lot of problems when the queries and some VBA code are run. I therefore made a server file which is just an mdb file with data tables in and NO forms or queries. This file is stored on a shared drive on the network server. We then created a client file which contains all of the forms and queries and code. This file contains linked tables to the server so when data is entered into the form, it "Sends" it to the server mdb file. The client is installed on each of the local machines c:. The problem with this was that if we made a change to the database, we would need to reinstall the client on every single user pc. This would of took ages. I therefore made an auto-update function that checked the version number on the server and if the server number was greater than the client number, a simple .bat fiile was run which copied the updated client file from the network to the relevant users local disk. The problem we have now is that our IT department are concered that if we make a change to the client and all the staff log in at 9am for example, it will start doing multiple copying of a file around 8mb in size to around 60 machines. They are only running on a 2meg pipe so this could cause some problems. We are not looking to change the client & server idea but does anyone know if this will have a big impact and infact if the updates for 60 machine is the equivalent or lesser of 60 people sharing the single file i mentioned earlier. If the IT dept are happy with 60 users accessing the same file at the same time, which they currently are, why are they unhappy with it updating these machine using the new method.
Would really apopreciate any thoughts anyone has..
I have a database with two tables, Buyer and Products, with one-to-many relationship. The key of Buyer is an autonumber ID, which is the foreign key to table Products.
The problem is that i have two copies of this database with different records (with ID starting from 1 to each one) and i want to merge the databases into one.
Any ideas how to do this without lose the connection of the records?
How do I merge these two datbases? I have downloaded them from Microsoft online templates, here http://office.microsoft.com/en-gb/templates/TC010178391033.aspx?CategoryID=CT101426031033&av=ZAC000 and here http://office.microsoft.com/en-gb/templates/TC010185481033.aspx?CategoryID=CT101426031033&av=ZAC000 and I want to have the two databases as one so that there will be a fourth tab on the cintact management database with the order form on? I want to be able to link the two so I can have all the customers details and orders together and print off reports. I really have not dealt with Access before so I really dont have a clue. Any help would be truly appreciated. I am sure it is easy but I just cant work out how to do it.
We are using an Access database for off-site data entry. We therefore have one master database we keep in the office and then a "template" version -which is identical to the master version except no records - we bring to each site, do the data entry and then merge that data back into the Master database.
Can anyone help suggest ways to make the data merging process more efficient. The database has approx 12 tables, so I dont' want to create an append query for each one every time. Is there a way to just "merge" two identical databases??
