Multiple Equations
May 10, 2005
This being my first post, I hope to explain myself well enough. I am working on a database to do estimations. I will be starting with three main tables - Jobs,items & options. There are options that can be purchased for each item. My problem is that the option price's are unique. Example: There are door hinge options which will need to be multiplied by the number of doors (which is a field) and there are other options which are multplied by the length (another field). Is there a simple way to accomplish this? This may sound stupid but I was wondering if it would be possible to have a equation field for each option???
View Replies
ADVERTISEMENT
Jan 24, 2006
I have a simple problem that I can’t seem find any help for. I’ve tried searching and browsing the forums with no luck. I have a Boolean (yes/no) column that I would like to be dependent on an equation containing fields in a table. The equation is simple: I have three columns I’ll call them A, B and H.
The Equation is: A*12+B<H
If it’s true then the field will equal yes, if the equation is false then the field equals no.
I’d like to have this in a query that I can base a report off of. I know very little about SQL or VBA so when I see SQL or VBA terms used I can’t always tell what they mean. So if someone could tell me what I need to do I’d also know where to put it. Thanks A bunch!
View 6 Replies
View Related
Aug 11, 2006
Ok my goal is to have a calculation in a query that includes a bunch of addition, division, and multiplication. (It uses 10 pieces of data) I tryed typing it in the expression builder but it doesn't work. I don't know if I am setting it up wrong or putting it in the wrong spot or what. I've tried some different things and I either get a blank box in that field or I get a syntax error. Also is there any way I can put the info received by the equation into a field in my table? Thanks
View 2 Replies
View Related
Jul 11, 2005
I'm trying to take a database from MS database (Works 7.0) into Access 2002. I've done this before by saving it as a DBase IV file and then opening it as such into access. However, this time I need the EQUATIONS to transfer as well, not just the values. I care little about the form view, or even the values themselves, but need the equations to transfer. Please advise. Thanks. :confused:
Mike S in ohio
View 1 Replies
View Related
May 12, 2013
I want to create a calculation query that uses different equations under certain conditions. Here's specifically what I need:
If the "Cost_Category" field is "Full Price" then the query uses the following calculation:
Total_Cost: Sum(nz([Program_Cost])+nz([Millage_Fee])+nz([Auditorium_Cost]))
If the "Cost_Category" field is "BOCES" then the query uses the following calculation:
Total_Cost: Sum(nz([BOCES_Number_of_Participants])*nz([Cost_Per_Person]))
I have successfully created these two queries individually, but combining them doesn't seem to work. Here's what I wrote:
Total_Cost: IIf([Cost_Category]=Full Price,Sum(nz([Program_Cost])+nz([Millage_Fee])+nz([Auditorium_Cost])),
IIf(Cost_Category]=BOCES,Sum(nz([BOCES_Number_of_Participants])*nz([Cost_Per_Person]))
It keeps coming up with errors, saying that I misplaced a comma, parenthesis or quotation. I've tried playing with it, changing the syntax slightly but it doesn't seem to work.
View 2 Replies
View Related
Apr 23, 2014
I would like to store equations on certain fields and display and edit them in a form.
I can't find a Microsoft Equation Editor control in the list of ActiveX controls. Is it stored as a .ocx file? How is it named?
In case Equation Editor can't be used within Access, is there another third party addin that provides a control with that functionality? It would be great if there were an application that accepted markup code like LaTeX as input so it were easier to implement a code to manipulate equations.
View 1 Replies
View Related
Dec 13, 2012
I am using Access 2010 and Excel 2010. I need to have VB script to export the access table 502 records by 38 fields into Multiple Excel workbooks each having multiple tabs. In the Access table each record has two fields: Div and Tab that will be used to name each workbook and each tab (sheet). There are 6 unique "Div"'s to name the 6 workbooks and there are several "Tab" names for each Div (workbook).
Note: These 6 workbooks with multiple tabs were originally imported into Access from one common folder on my desktop by this routine:
Option Compare Database
Option Explicit
Private Sub Command1_Click()
Dim blnHasFieldNames As Boolean, blnEXCEL As Boolean, blnReadOnly As Boolean
Dim lngCount As Long
[Code] .....
View 7 Replies
View Related
Dec 13, 2012
I am using Access 2010 and Excel 2010. I need to have VB script to export the access table 502 records by 38 fields into Multiple Excel workbooks each having multiple tabs. In the Access table each record has two fields: Div and Tab that will be used to name each workbook and each tab (sheet). There are 6 unique "Div"'s to name the 6 workbooks and there are several "Tab" names for each Div (workbook).
Excel workbooks would take names from the "Div" field and the tab names would come from the "Tab" field in the Access table. First need to find workbook name (Div - Field) then the look for each sheet name (Tab - Field) to create 1st Excel workbook with all the sheets (Tab) and repeat the process. I think you need to approach of read the Access table one record at a time keying on the "Div" and "Tab" fields in creating each Excel workbook with the associated multiple tabs (sheets) that are written to a common folder.
Note: These 6 workbooks with multiple tabs were originally imported into Access from one common folder on my desktop by this routine.
Option Compare Database
Option Explicit
Private Sub Command1_Click()
Dim blnHasFieldNames As Boolean, blnEXCEL As Boolean, blnReadOnly As Boolean
Dim lngCount As Long
Dim objExcel As Object, objWorkbook As Object
Dim colWorksheets As Collection
[code]....
View 12 Replies
View Related
Sep 25, 2014
I want to create a form that allows users to update multiple fields for multiple assets. Below is what I came up with:
Ideally, I'd like the subform to be filled in by having the user select multiple Assets from the S/N combobox field which would then auto-populate the "Type" field. Then they would fill out the appropriate fields they want edited in the top part of the form. They hit save and magic happens. This would also be nice because only assets they want edited would be displayed (easier on the eyes) and no distinguishing would be necessary. To do it this way, I know I would need to use a temp table but I wanna avoid using temp tables.
I know I can do this by adding a Yes/No field in the "Asset" table, setting the "Asset" table as the subform's recordsource, and then putting a checkbox in the subform and allowing them to check the assets that they want to edit (which would also allow me to sort it instantly so that checked Assets are at the top of the datasheet for easy viewing), but I would like to know if there's a way of accomplishing this without the use of checkboxes.
I know I could also use a listbox and that allows them to multi-select items, but I'm not sure if that allows me to group all selected items at the top of the listbox for easy viewing of selected items. Plus it would involve a lot of scrolling (there are over 2k assets).
View 2 Replies
View Related
May 6, 2014
I have a form with 15 unbound text boxes (daily temperatures) and what I am trying to do after entering the temperatures into the text boxes the user clicks an add button which will add 15 new records into the temperature table
the code I have started off with is
Code:
CurrentDb.Execute "INSERT INTO ColdTemperatures (ProductID, ColdTempDate, Temperature) VALUES (" & Lettuce & ", #" & Me.RealTime & "#, " & Me.Lettuce & ")"
which adds 1 successfully however if i repeat the code above for all 15 this Im assumming will create a potential bottleneck and slow the system down
is it possible to add all 15 records at once? do you think Im going at this the right way
View 5 Replies
View Related
Sep 20, 2014
I made a database that in one of the forms, I like by clicking on a button the user be able to select 5 excel files with different file names (in the same directory) and then based on the imported file's names, it be stored in 5 different tables.
At the moment by using the bellow code, I can import multiple files (with the same formats) only into one table . My vba code comes as follow:
Function GetAllFiles()
Dim fd As Object
Dim strFilter As String
Dim lngItems As Long
Const msoFileDialogOpen As Long = 3
Const msoFileDialogViewDetails As Long = 2
[Code] ....
View 4 Replies
View Related
Jan 4, 2014
I need to count records based on multiple criteria from two different tables. I have two tables (i.e. "tblTasks" and "tblTaskHistory"). The tables have a one-to-many relationship based on the "TaskID" field. "tblTasks" has a field called "AssignedTo" and "tblTaskHistory" has a field called "TaskStatus". I need to know how many tasks have been "reopened", the "reopened" status is located in the "TaskStatus" field in "tblTaskHistory". I need this count against a unique listing of employees which can be found in the "AssignedTo" field in "tblTasks".
View 4 Replies
View Related
Aug 25, 2012
I would like to know which way is the best way to import excel data from multiple sheets in to multiple tables in access.
For example data from Sheet1 -> Table1, Sheet2->Table2, Sheet3->Table3 etc...
I have tried using this:
Cmd.TransferSpreadsheet acImport, acSpreadsheetTypeExcel5, "Table1", "C:Importedfile.xlsx", True, "Sheet1!"
Ironically, data from Sheet2 and Sheet3 seem to be properly imported in to table2 and table3, but some of the data from Sheet1 seems to be missing in Table1 after import.
Any other ways to import the data?
View 1 Replies
View Related
Aug 1, 2013
I am trying to build a newer database 2010, based on an older one,2000, that has been locked tight and I cannot see the modules to kinda get a reference of where to start. I am trying to find a VBA code that will allow me to import a several text files to one table. The text files are all in the same format but I cannot remove the page headers and footers to get the table to look right. I have attached an example of the text file i am trying to import but it is a stripped down version for information protection.
Also, it appears in the old Database Table once imported as:
J.Smith 1234 01 ABCD ABCD HGJV 2345 ABCDE ABC6 Qual Date Date
J.Smith 1234 01 ABCD ABCD HGJV 2345 ABCDE ABC6 Qual Date Date
J.Smith 1234 01 ABCD ABCD HGJV 2345 ABCDE ABC6 Qual Date Date
J.Adam 1234 01 ABCD ABCD HGJV 2345 ABCDE ABC6 Qual Date Date
J.Adam 1234 01 ABCD ABCD HGJV 2345 ABCDE ABC6 Qual Date Date
J.Adam 1234 01 ABCD ABCD HGJV 2345 ABCDE ABC6 Qual Date Date
If I could import the text files and end up with a table like this, it would be all i need as i could run all the queries i need from this.
View 3 Replies
View Related
Nov 16, 2006
I HAVE A DATASETS cSV TEXT FORMAT WHICH HAS A SELECTION OF FIELDS THAT NEED TO BE IMPORTED INTO A TABLE. USING THE ADVANCED IMPORT FACILLITY I HAVE BEEN UNABLE TO IMPORT THE DATA PLEASE HELP AS THIS IS FOR MY A-LEVEL STUDENTS.
THE FIELDS REQUIRED IN THE SESSION TABLE ARE,
Booking ID, Customer ID, Date Booking Made, Pickup Point, Payment Made
The CSV data set attached
tHANK YOU
SIMON
View 2 Replies
View Related
Oct 28, 2013
A small issue I was wondering of for a few day . Is it possible in SQL query to SELECT multiple fields from multiple tables ? Example for the question is
Code:
dim my_var as String
my_var = "SELECT Emp_FName , Emp_LName , Emp_Adress " _
& " FROM Table1 " _
& " AND Emp_Date_Of_Payment , Emp_Sum_Of_Payment " _
& "FROM Table2 " _
& " WHERE Emp_ID = 3 "
Is this code actually valid in SQL gramatics , and is it usable if passed to a Recordset variable ( rs = CurrentDB.OpenRecordset(my_var) ) ? Just FYI - The two tables are not related and I want to keep them that way (If possible relate their records just via SQL/Vba )
View 7 Replies
View Related
Apr 12, 2013
I have 10 tables, 30+ fields on each table (every table has the same 'account number' field). I only need from 5 - 20 fields from each table. How do I get the certain fields from each table and put them in a table, query or report?
View 1 Replies
View Related
Jul 6, 2006
I have the following problem.
I have 3 tables made up of ID and NAME and other parameters.
NAME is unique field in each table, whilst ID is not unique. the three tables share the same fields, but can't be combined due to the NAME field not being unique throughout.
Now I have a single table that has a unique ID so I want to make a 1-inf relationship between this table and all three. the problem is how do I look at all three tables at the same time instead of having to insert subdatasheet on only one table.
see attached picture for the relationships.
http://www.members.iinet.net.au/~thydzik/temp_diag.jpg
View 5 Replies
View Related
Sep 21, 2004
I am trying to create a simple Search form in Access where a user can select a desired record and query multiple tables using the inputs.
I would like them to be able to query Retailers, Distributors and Products.
The 6 tables are linked as follows:
Although some of these tables are not included in the query, they are required to ensure relationships.
Retailers -- Uses (RetailerID,DistributorID) -- Distributors
Retailers -- Orders (RetailerID,ProductID) -- Products
All retailers have at least one distributor BUT a retailer may or may not have ordered any products.
I have created my form but the query linked to the form is having some trouble. It is only selecting those records that have ordered products. For example, if I query a retailer name only and it does not have any ordered products, it will not display. Is there a problem with the table joins? The SQL for the query is displayed here:
Code:
View 5 Replies
View Related
Jun 27, 2006
I created the below query to come up with a new form. When I enter a single parameter, it works fine. When I modify the code and enter multiple patameters, it also works fine if I do not enter any information for the parameters. But once I enter one of the parameters information, then it does not come up with anything. I double checked and made sure it was typed in correctly. Is there a trick when entering multiple parameters on a query?
SELECT [JE 06 Log].[Operational Region Name], [JE 06 Log].[Period Name], [JE 06 Log].[Source System], [JE 06 Log].[Source Name], [JE 06 Log].[Category Name], [JE 06 Log].[Associated Category Name], [JE 06 Log].[JE Name], [JE 06 Log].[JE Base #], [JE 06 Log].Area, [JE 06 Log].[Line Description], [JE 06 Log].[Natural Account], [JE 06 Log].Description, [JE 06 Log].[JE Entry Date], [JE 06 Log].[Debit Amount], [JE 06 Log].[Credit Amount], [JE 06 Log].Amount
FROM [JE 06 Log]
WHERE ((([JE 06 Log].[Period Name])=[Enter Period]) AND (([JE 06 Log].[Source Name])=[Enter Path]) AND (([JE 06 Log].[JE Base #])=[Enter Base Number]) AND (([JE 06 Log].[Natural Account])=[Enter Natural Accnt])) OR ((([Enter Period]) Is Null) AND (([Enter Path]) Is Null) AND (([Enter Base Number]) Is Null) AND (([Enter Natural Accnt]) Is Null));
View 6 Replies
View Related
Nov 14, 2005
Does anyone out there know how I might do the following:
I have a main folder which contains many sub-folders. In turen, each subfolder contains several files. I am interested in creating a text file that within each sub-folder will list certain files in that sub-folder. Example:
"Main Folder"
"Sub-folder 1"
FileA
FileB
FileZ
"Sub-folder 2"
FileA
FileB
"Sub-folder 3"
FileA
FileB
FileZ
Pseudo-code:
Read Main Folder
Do While Sub-folders exist
Do while selected sub-folder contains files
If selected sub-folder contians FileZ then
Write selected sub-folder name to text file
Write time/date stamp to text file
else
loop to next ub-folder
end if
end do while
end do while
Close input and output
Any help offered is greatly welcome. Thank you!!
View 7 Replies
View Related
Jul 16, 2007
Here is the situation that I'm hoping that someone can help me with. I'm working with a database that tracks our condo units - from prospect coming into the system until we close them as a buyer. All the units are setup in the system so a salesperson will select from the units available. All that works fine when I create reports. The problem is trying to get the parking and storage on the same reports with the unit information. The problem is that there are multiple parking/storage units "attached" to a single unit and I cannot figure out how to get them to all appear on a single row of the report. As an example -
I have units A, B, C
Parking units p1,p2,p3,p4,p5,p6
Storage units s1,s2,s3.
Unit A uses parking units p1, p2, p5 and storage unit s2.
Unit B uses parking unit p3 and storage unit s1.
Unit C uses parking unit p4, p6 and storage unit s3.
How do I write a query/report that would show:
Unit Parking Storage
Unit A p1, p2, p5 s2
Unit B p3 s1
Unit C p4,p6 s3
Thanks,
Chester Campbell
ccampbell@jfreed.com
View 3 Replies
View Related
Feb 19, 2008
I want to count based on 1 (same) field from each of two tables, based on if ID is in "X".
select a.groupid, count(a.id), count(b.id)
from ta a, tb b
where value in ('a','b','c')
group by a.groupid
Thats sort of the psuedocode but Im not getting the right results.
Any help would be appreciated.
View 6 Replies
View Related
Apr 10, 2013
Is it possible to set multiple conditions across multiple tables using OR in a where clause? For instance, can you run where......
(table1 = 'test') or (table2 = pass) or (table2 = "fail) AND (class = 'SQL');
View 1 Replies
View Related
Jul 31, 2013
I have three tables. Risk, Names and RiskAndNamesJunction table. I have the junction table because I have many to many relation (meaning many people can be connected to one risk and many risks can be connected to one people).
The problem is that If I make a query to show the people related to the risks, if there are many people for one risk then it will put the people in different rows. Meaning that for risk 2 I will have three rows, because there are three people connected to this rows. See the attached file!
What I would like to do is to have a query which (in case there are more than one risk owners) puts the second name in another column, the third name in another column and so on. So I will have only one row per risks.
The attached file is a dummy file, so there are only maximum three names per risk. In the real file the maximum is five names per risk. So I am talking about no more then five extra columns. (So I am talking about a query which would put the first finding in the first extra column, then the second item in the second and so on till five. It there is no third or fourth or fifht item then the columns remain blank).
Unfortunately I have to do this because our mother company works with excel and they are sticking to this format in excel.
See the attached file ....
View 2 Replies
View Related
Apr 18, 2006
Ok, I have a form where new clients are entered into the system. We would like to have an automated check that could be run which would check several different fields and compare them to several different existing fields in two different tables to see if the same name shows up. What is the easiest way to go about doing something like this?
Thanks.
View 1 Replies
View Related
