Multiple List Boxes!
Mar 2, 2006Is it possible to control the options available in one list box with an option made from a previous listbox? If so how do I do this?
Thanks
ADVERTISEMENT
Multiple Selection List Boxes To Add New Records
Aug 16, 2007Hi! I hate to ask for so much help on this, but I'm lost.
I have a budget database that is used to track equipment for purchase. Many times, the same item (a desk, or chalkboard) is needed for more than one room, so I need to buy more than one. The way my form is set up, I put the detail about the chalkboard in and select the room ID for the room it is going into. The problem with this is that I don't want to have to do it for every single chalkboard location in the college.
So, I want to use a multiple selection list box to add the records all at once. In other words, I want to enter the item detail in my form, and then select all of the rooms that item is going into, and then click OK! and have it create new records for each room that item is going into. So rather than having one new record created (as would be with a combo box), if I have three rooms selected, I want the OK button to add the record to the table three times with a different room number for each record. Any ideas????? Thanks!
KellyJo
Multiple Combo / List Boxes - Sort Based On Entries
Sep 23, 2013I am trying to put together a form where employees will be entering maintenance information into my database. One of the requirements for this data is that when they perform repair work on an asset, they have to list a problem, cause and remedy. These are codes that are specific to each asset.
The closest thing I can think of to what I am trying to acheive is the selectors on car search websites. You select a MAKE, and then the MODEL list is narrowed down based on that, then you pick the TRIM, which is narrowed down based on the model selection. I have an Excel spreadsheet of the Assets(Failure Class), Problems, Causes, and Remedies...I'm just not sure how to put this into Access to get the desired output. I have attached a sample of the Excel spreadsheet for illustration.
I believe I'm going to have to put each of the columns in a seperate table and use relationships..but I'm not sure about that.
Modules & VBA :: Multi Select List Boxes With Multiple Columns In Access 2013
Oct 22, 2014I have a listbox set to Multiselect property of Simple. The listbox is populated by using a table. There are 4 columns in the listbox
Code:
1 3/23/2014 4/5/2014 2014
2 4/6/2014 4/19/2014 2014
3 4/20/2014 5/3/2014 2014
The columns are PayPeriod, StartDate, EndDate, FiscalYear
What I want to be able to do is highlight a chunk of dates and have the first selected StartDate and the last selected EndDate populate two hidden text boxes so I can use them for my queries/reports.
I've tried a couple different ways. Each time what happens is it only uses the last item I have selected in it's calculations.
Code:
Dim ItemIndex As Variant
For Each ItemIndex In Me.lstPayPeriods.ItemsSelected
If Me.lstPayPeriods.Selected(ItemIndex) And Me.lstPayPeriods.Selected(ItemIndex - 1) = False Then
Date1.SetFocus
Date1.Text = Me.lstPayPeriods.Column(2, Me.lstPayPeriods.ListIndex)
End If
Next
In this example I tried to have it go through each Item of the listbox. I wanted to check to see if the current row was selected and the row before it wasn't. That way I could determine it was the first item selected in the group of selected items. It would always only use the last item I had selected.
Code:
Dim CurrentRow As Integer
Dim FirstDate As Date
For CurrentRow = 0 To Me.lstPayPeriods.ListCount - 1
If Me.lstPayPeriods.Selected(CurrentRow) Then
Date2.SetFocus
[Code] ....
I tried to do something similar with this code. Again, it only uses the last item I have selected.
Forms +List Boxes +Text Boxes With Formulas
Nov 8, 2004I have a form with a List Box (List BoxA) that returns a value from a query. I then have a Text Box (Text BoxB) that uses the value from List BoxB and multiplies it by let's say 2. It works giving me the correct value but only becomes visible after I click inside List BoxA. How can I make it visible as soon as the form is opened? I tried refreshing the form data, didn't work and I tried a requery macro which didn't work either.
Thanks,
Lester
Use Multi-select List Box To Filter A Report With Two List Boxes
Nov 20, 2013Allen Browne's "Use a multi-select list box to filter a report" solution, in particularly with two multi-select list boxes? The code works fine for me for either box so long as I code it for one box alone. Combining the two into one code results in a type mismatch error. I'm trying to use the code to pass the contents of both multi-select boxes as Where conditions to a report. Both boxes are based on number fields. To try to isolate the problem, I've removed Allen's setDescription and OpenArgs conditions. We're unfortunately still on Access 2003 as the company desires to squeeze every dime by using until end-of-life next year.
Code:
Private Sub cmdPreview_Click()
On Error GoTo Err_Handler
'Purpose: Open the report filtered to the items selected in the list box.
Dim varItem As Variant 'Selected items
[Code] .....
Queries :: Multiple Combo Boxes And Text Boxes On A Search Form
Mar 24, 2014I'm trying to build an database for aircraft operators. I've got the basic tables structure and relationships but I'm stuck on building an search form to filter records by user input.I've got following controls on my form (unbound):
1. AircraftType (combo box) from tblAircrafts
2. CompanyName (combo box) from tblListOfAircraftsOperators
3. TeailNumber (text box) from tblAircraftOperators
4. AirportNameSearch (combo box) from tblAirports
5. PassengersNumber (text box) from tblAircraftOperators
6. ManufactureYear (text box) from tblAircraftOperators
7. SourceSearch (combo box) from tblInfoSource
8. CountrySearch (combo box) from tblCountry
9. CategorySearch (combo box) from tblAircraftCategory
10. EamilToOperator (text box) from tblAircraftOperators
11. InteriorPhoto (Bound object frame) from tblAircraftOperators
12. ExteriorPhot (bound object frame) from AircraftOperators
I need to enable users to search for aircrafts based on those criteria. As I mentioned I'm new to Access and I don't have any advanced coding skills. I have a query build to perform the search and this is the code I've managed to write so far:
SELECT AircraftOperators.RegistrationNumber, AircraftOperators.PassengersNumber, AircraftOperators.ManufactureYear, AircraftOperators.EmailToOperator, AircraftOperators.ExteriorPhoto, AircraftOperators.InteriorPhoto, tblListOfAircraftOperators.OpratorName, tblAircrafts.AircraftType
FROM tblAircrafts INNER JOIN (tblAirports INNER JOIN (AircraftOperators INNER JOIN tblListOfAircraftOperators ON AircraftOperators.CompanyName =
[code]....
Query To List Multiple Records In A List From Multiple Queries
Jul 11, 2013I have a DB where you there's 5 tables all linked together by one project ID
tables below
Project , Staff, Asset, allowances, travel, mark up
What I can do is create a new project, then add records to each of the other tables on what different items I require,
i.e. I create a new project - called project one, in the project table I create a record stating, name, time scale, client and location, then I add different records to each of the other tables on what I require all linked to the same project ID. (probably not explained that too well)
Now I want to create a query that lists all the requirements one after the other this will make it easier to create reports and to calculate costing's.
At the moment I have made 5 different queries listing all the data, then have one report containing 5 sub reports to display the data, no this does work.
Forms :: Changing Multiple Text Boxes To Combo Boxes?
Mar 14, 2014there is a way to convert multiple text boxes to combo boxes all at once, rather than right clicking on them one at a time, and selecting Change to.
I have a form with about 50 fields and most of them need to be converted to combo boxes. I'd always done it manually one at a time up to this point, but I'm trying to build up my learning and look for smarter ways to do things.
List Boxes And Combo Boxes
Feb 28, 2007Hi everyone,
I have been making progress with customizing a
MS Access program, but one major problem is that
I have been trying to make a List Box or Combo Box
that I can use to enter data in the TABLE, but I
find that I get a pull-down list that has the list of
values from only the parameter that is primary key.
More specifically, the program is set up as follows:
I have two tables in this program: One that is called
"invoices" and one that is called "items". In both of
these tables, there is one common parameter, which
is "Item Number". Item number is the primary key,
and I used the "relationships" function to tie this
parameter to itself between the two tables.
I was successful in setting up a list-box for the
"Item Number", but when I try to set up a list-box
for another parameter that is supposed to display
a person's initials, the pull-down list displays the list
of item numbers instead of the list of people's initials.
In fact, I don't know if there is an extra step I need to
take so that the database stores a list of people's initials.
Instead, I just fill in the initials in the field for each
record for which the "Item Number" is the primary key.
How can I get the list-box to pull down a selection of
different people's initials, or in other words how can I get
all the people's initials to be stored so that the list of
initials can be looked up. Just so you know, I have tried
different choices of entries in the "Lookup" tab in the
Design mode of Tables, including Display Control,
Row Source Type, Row Source, and Bound Column,
but the outcome is that the only parameter that I
get get in the pull-down list is the primary key, which
is Item Number.
I appreciate any help you can offer in explaining how
to correct this.
On a separate note, one of the parameters is "Date", and
on the reports, I'm trying to figure out how to filter a
specific date range so that I can limit each report to a
specific month. Please advise me on this procedure as well.
Thanks.
Modules & VBA :: Inserting Multiple Records From Multiple Unbound Text Boxes
May 6, 2014I have a form with 15 unbound text boxes (daily temperatures) and what I am trying to do after entering the temperatures into the text boxes the user clicks an add button which will add 15 new records into the temperature table
the code I have started off with is
Code:
CurrentDb.Execute "INSERT INTO ColdTemperatures (ProductID, ColdTempDate, Temperature) VALUES (" & Lettuce & ", #" & Me.RealTime & "#, " & Me.Lettuce & ")"
which adds 1 successfully however if i repeat the code above for all 15 this Im assumming will create a potential bottleneck and slow the system down
is it possible to add all 15 records at once? do you think Im going at this the right way
How To Transfer Multiple Select Item In List Box To Another List Box
Jun 2, 2012How To Transfer MultipleSelect Item In Listbox to another Listbox ?
View 7 Replies View RelatedABC List Boxes
May 26, 2005How would I create not only a list box but a Cascade combo box in Acess could you help me out on this thread?
So when I selct J for J Richard Szeremany the next ABC box only lists the CD's by that Artist then I click on the Name of CD and the song onfo comes up.
mikevds@optonline.net
List Boxes
Aug 4, 2006Im having a problem with a listbox/query/label. My DB is based on one that was posted in the sample database are of this forum. In itself it works really well. Clicking on the labels at the top of the list box applys a sort to the list box, each one of these sorts is based on a query. My porblem is that I want to be able to produce and print a report based on those queries. I know I could put a bunch of buttons on the form and do it that way. Or put a list box with all the my reports in and do it that way. I would prefer though, to have one button with one report reading the information from the different queries depending on what label is selected. Hopefully thats clear, the DB demonstartes it better. Any help appreciated. Thanks!
View 7 Replies View RelatedList Boxes
Sep 8, 2006I am struggling to create the "hidden" control. I'm assuming it should be a text box? Where should the code given on the above page go in the text box properties? Do I need to do something to activate the code after selections are made in the list box?
View 2 Replies View RelatedList Boxes
Oct 18, 2006Im tryin to move data from one list box to another ive seen some sample datebases and how they use command buttons to move the data back and forth from the list boxes (usually have <, >, <<, >> on the command buttons)
Does anyone know how i do this?
List Boxes
Oct 14, 2004I have an unbound list box with it's row source a query whose select criteria comes from another list box once selected. When the form first opens the list box is empty until the user makes a selection. How do I prevent access from running the query in the first list box when the form first opens. It slows everything down.
View 1 Replies View RelatedList Boxes
Jun 24, 2005I want to be able to specify the site of a disease. I had a combo box with pre-defined options (linked to a LU table) but now i find out there can be multiple disease sites. I changed it to a list box and chose multi-select (extended) but this does not retain the values in the form or record them in a table (even when I use the wizard and tell them what field i want the results in). What am i doing wrong or have I missed the whole gist of what a list box is for? Cannot find anything on line to help me here
View 5 Replies View RelatedHelp With List Boxes
Oct 19, 2006I a list of data in a list box and i want to be able to choose diiferent pieces from the list. How can i ref an individual record in the list box do you use
ME.Listboxname.value something like that im lookin to move pieces of data from one list box to another for printing
i can move all the records by using
Private Sub MoveAll_Click()
Dim strSQL1 As String
strSQL1 = "Update projects SET projects.Selected = Yes Where projects.Selected = No"
DoCmd.SetWarnings False
DoCmd.RunSQL strSQL1
DoCmd.SetWarnings True
Form.Refresh
End Sub
and i can move them all back by using
Private Sub RemoveAll_Click()
Dim strSQL2 As String
strSQL2 = "Update projects SET projects.Selected = NO Where projects.Selected = Yes"
DoCmd.SetWarnings False
DoCmd.RunSQL strSQL2
DoCmd.SetWarnings True
Form.Refresh
End Sub
Any idea on how to move an individual record?
List Boxes In Forms
Dec 21, 2006HI hope you can help me!
I'm wanting to create drop down lists that are filtered as a result of a previous field, but not having much luck!
I've tried using a query to do this, but not having any luck! am i going down the right path?
Do i need a new query for each list, or can they all run off one query?
How can i refresh the list if a previous field is updated?
Additionally where there is only 1 option (similar to a lookup in excel) how can i set this without using a list box?
Hope that in the xmas spirit, my job is safe!!
Merry xmas to all.
Andrew - Hull
List Boxes Fed From Queries
Jun 25, 2007Hi peeps
I have a list box that contains 4 fields and the list box is located on a form.
One of the fields on the form is [Date logged]. This is also colum 2 of the list box.
I am trying to write some code to say that if the Date logged on the form is different to the one in the list box, run an append query.
Basically, the principal behind this is to have an audit trail of when records have been ammended. The first time a record is created, a base record is created. It is this base record that will populate the list box along with all other record changes that occurr from that point on.
I am trying to say that if the [Date logged] does not match the last record in the list then it knows it needs to append the record to the history table again as a change has been made. I would really appreciate some help here folks. Thanks so much! :-)
List Boxes On A Table.
Apr 26, 2005Hiya guys,
I have got what seems to be a pretty straight forward task i need to do!
I have got a table named tblInput, with four fields Type, Collection, Value and Reason.
I need to give the Type field two possible options "a" or "b", i then need the Reason field to display a list of values depending on whether "a" or "b" was selected in the Type field.
Values for "a" need to be "Success", "Failure" or "Rejected"
Values for "b" need to be "Status Change" or "Amendment"
I have been playin for a couple hours now trying various differnent methods but i am commin up short, its this something i am able to do from a table?
Many thanks
Tim
Dependant List Boxes
Feb 26, 2005Hi, im kind of new to access and im not sure whether this is possible or not, but i have a problem which needs to be solved by 4 list boxes on the same form.
The first list box will have 4 choices in it and depending on which one is chosen the second list box will be updated. This continues on to the 4th list box, which when a choice has been made a new form will open with the relevant information from the tables.
I hope this is enough information to enable someone to aid me with my problem, thankyou very much for your time.
Craig.
Help Updating List Boxes
Mar 28, 2005I am working on a database for a bowling tournament. I'm currently working on a form where the user selects from a combo box bowlers' names for doubles pairings. I thought that as a helpful tool I would also display a list of available remaining bowlers once the combo box information has changed.
I'm trying to write a module for the combobox_change trigger. What I'm having trouble doing is pulling the updated recordset from the base form and using that to update the availability box -- in other words, how can you query data from the recordset underlying an open form before the form is closed and the data is saved to the tables. The only way I can do this now is to temporarily close the form, manipulate a recordset from the table, then re-open the form. There's got to be a better way. Maybe I'm just missing something here.
Thanks in advance for any help.
List Boxes In Forms. Help Please! :)
Jun 7, 2005I am having a lot of trouble trying to understand List Boxes in general and am hoping someone can explain them for me.
My problem is I have a database where a user has one unique ID number, but they can have several departments that they can be linked to in another table. I'd like to be able to have the various departments listed in a List Box with the departments that the user is linked to automatically selected when viewing the form.
Then if I was to add a new user, I'd select each department by using the Multi Select feature and add those details to the existing database.
Does this work or am I way off track here?
I hope that makes sense. My experience to date has been creating tables in Access. Everything else is new to me.
Thanks in advance. :)
Reseting List Boxes
Nov 14, 2005I am doing a search form on a database and after the search, I have 'new search' & 'refine search' options. The list box is filled from a query and when the user selects 'new search' I want it to show nothing selected.
View 1 Replies View Related