Multiply Fields
May 21, 2005How to multiply a group of records in an Table (eg. I have a table with tow fields Id and Value, how to multiply all Value records)
View Replies
ADVERTISEMENT
Multiply Fields, Using The Sum Function.
Mar 17, 2008Hi all, wondering if anyone can help me.
Im trying to a run a query to see the results of my table. but i am experincing problems, when use the SUM function.
I have constructed a query with three fields.
1) QTY.
2) Cost
3) Total.
what i would like is to be able to Multiply QTY & Cost to get the total.
so whan QTY Is 0 and Cost is £0.00. the query recongises it and changes the total should then be £0.00.
any advice on enabling the query is welcome.
Forms :: Unable To Multiply Values Of Two Number Fields Together
Aug 8, 2015I'm trying to multiply the values of two number fields together, but it is not working. I used to be able to do this easily in earlier versions of Access. Here's the problem:
On the form, I need field A x field B to appear in field C. I've tried this as an expression in the build event function on the control, but it is not working. My code reads as follows: = (field A) * (field B).
Multiply Queries
Sep 5, 2005I am try to do all in one queries which has two queries imbedded into.
"SELECT Filter_ID, Channel, SpeedBands, Filter_Channel, Filter_type
FROM
(SELECT [Tbl_Lookup_Channels].[ID] AS Channel, [Tbl_Lookup_SpeedBand].[ID] AS SpeedBand
FROM Tbl_Lookup_Channels, Tbl_Lookup_SpeedBand)
LEFT JOIN
(SELECT [Site_ID] AS Filter_ID, [Channel] AS Filter_Channel, [Type] AS Filter_SpeedBand
FROM Tbl_SiteResults
WHERE Site_ID=" & ID &")
ON ((SpeedBand = Filter_Speedband) AND (Channel = Filter_Channel))
GROUP BY Filter_ID, Channel, SpeedBands, Filter_Channel, Filter_type
HAVING Filter_Channel Is Null AND Filter_type Is Null
ORDER BY Channel, SpeedBands;"
If is not work at all it is just asking that it is invalid join to the main query
Thanks
Sean
Count And Multiply
Jun 15, 2006Does anyone know how to count a field and multiply the answer automaticaly.. so if i have a count function on number of names repeated in a table via nameID the result would be presented in the new query with how many times name repeated multiplyed by a defualt set number.instead of name repleated 3 times, it be 30 times..using a query. any help appreciated..thanks
View 5 Replies View RelatedMultiply Parameter Queries!
Apr 13, 2007i have a Query where i have Criteria for two fields as the following:
Field :Date of Incident
Crirteria: [Forms]![frmSearchStudent&Date]![cboStartDate] And [Forms]![frmSearchStudent&Date]![cboEndDate]
Field: StudentSurname
Criteria: [Forms]![frmSearchStudent&Date]![Combo0]
Occasionally, staff may just want all incidents (records) to be shown for the selected StudentSurname and so, just select the surname and leave the date fields blank.
i tried the following:
Field :Date of Incident
Crirteria: [Forms]![frmSearchStudent&Date]![cboStartDate] And [Forms]![frmSearchStudent&Date]![cboEndDate]
Or: [Forms]![frmSearchStudent&Date]![cboStartDate] Is Null And [Forms]![frmSearchStudent&Date]![cboEndDate] Is Null
Field: StudentSurname
Criteria: [Forms]![frmSearchStudent&Date]![Combo0]
then when i tested this by leaving the date fields blank and selecting a valid student surname it simply returned all incidents (records) for ALL students not the selected one.
is it possible to achieve this? if so, could someone please help!
How To Multiply Values In A Form
Mar 22, 2005Hi. I'm new to Access and I wonder if someone could help me with this problem I am having while constructing a database. We need to create a database of reservations to a program we offer. We will need to store the quantity of reservations per person. What we needed to do is multiply the quantity of reservations by the value of each reservation and get a 3rd field with the final amount. So we need a field with the result of the multiplication of the quantity of reservations by the value of each reservation, which is a fixed amount. I'm having problems getting access to do this, I get an "error" message on the resulting field. Can somebody help me with this?
Thanks.
Multiply A Currency Field With Code
Apr 27, 2005Currently i have:
If CIS = False Then
CIS_Payment = "£0.00"
Else
CIS_Payment = "£20.00"
End If
which works ok but what i want to do but do not know the correct way/syntax is:
If CIS = False Then
CIS_Payment = "£0.00"
Else
CIS_Payment = "Labour_Total*18/100"
End If
Where CIS_Payment and Labour_Total are currency fields, and CIS is a checkbox updated using an update query with the same info as detailed in another table (Couldnt get the conditions to work referencing the checkbox in the other table, so duplicated the box in both tables and used a query to sync)
Any ideas???
Queries :: Multiply Time By Quantity
Apr 27, 2015I have the time per item, and I would like to multiply that by the quantity, so I can tell the total time. But I cant find in access how to * data/time by a number.
View 3 Replies View RelatedForms :: Multiply A Text Box Value By A Number
Sep 10, 2013I have a text box in a form that is producing a number from the query that the form is based on.In another Text Box i want to show the Value of the first Text Box multiplied by 3 because i am going to hide the first text box to only show the calculated number.
At the moment i have this in the control source of the text box [CountOfJobID]*3 but all i am getting is #####...I have set the format of the text box to General Number.
Split Form Input Into Multiply Rows
May 14, 2007Hi, I have a problem, I want to split up form input into several rows but I don't know how. Alright here's the deal: I have a textbox in a form were I write down all the ipaddresses for one computer and all the addresses end up in the same row in the same field in the table, I want the addresses to end up in different rows but in the same field, how do I do?
I might also add that i'm pretty new to access.
Tables :: Multiply Data Of Two Columns And Display Result In Third Column
Jun 24, 2014My question is that can we do multiplication of data of two columns and result is automatically displayed in third columns in datasheet view.? Is it possible ?
View 1 Replies View RelatedGeneral :: Multiply Different Amount Of Hours By Different Amount Of Rates
Jul 17, 2014I am trying to make a report in which I can see the amount of money that I have to pay weekly to an employee. To explain myself clearer, I have different rates for each employee. For example:
NameNormalPayRateVacationPayRateSickPayRateOvertimePayRateStandbyPayRate
John Smith$15$10$15$30$8
Ken Jonson$10$8$10$20$8
I am doing this in a query. So what I want to be able to do is, for example, take 4 hours that the employee worked at NormalPayRate and multiply it. But if tomorrow the employee worked at a different rate, for example 3 hours overtime, I want those 3 hours multiplied by OvertimePayRate.
The way I saw it on my Google researches, is that they have only one rate and the amount will be [SumOfHours]*[Rate]. But how can I tell my query to skip, for example, one rate because the employee didn't work at that rate that day. So I can have different amount for the different rates.
By the way, entering the information I can divide at what rate the employee worked x day. So if the employee work 6 hours at regular, and later on 4 hours at standby, I have those information separated in my table.
Results that I am getting: I can easily get the amount in money multiplying the whole hours by a rate, so my result in my report will be multiplied by the same rate.
I am using Access 2013 ...
Beginners Question - Auto Update Fields Based On Fields In Another Table
Nov 26, 2007I don't have any database experience whatsoever so please go easy.
I'm guessing this kind of this is extremely simple for all of you.
I'm constructing a database of network resources and devices and I'd like to automatically update the values in one field based on the values of a field in another table.
The first table is called "IP" and the fields are called "Address", "IP Type" and "Device".
The second table is called "Devices" and contains the fields "Name", "Description", "Asset Number" and "IP".
Here's an example of the tables: (ignore the "code" tag. i've only used it to align my columns properly)
DEVICES:
NameDescriptionAssetIP
XserveFile Server107203.30.144.75
ProliantXDHCP119203.30.144.15
IP:
AddressIP TypeDevice
203.30.144.75Static
203.30.144.15Static
What I want is for the Device field in the IP table to automatically update it's values based on the values found in the Devices table. In this case, the values that should appear in the Device field in the IP table are "Xserve" and "ProliantX".
I've searched through but haven't found a complete solution, just little pieces which I'm too inexperienced to put together myself.
thank you
-Tim
Creating New Table From Form Data Fields/clreaing Datat Fields.
Apr 13, 2008I created a form in Access that retrieves data from a table. Inside the form, I am able to access/populate data fields with data from the table. I also have data fields, inside the form, that requires key-in data. I have some how lost the ability send all data field information to a second table and clear existing data fields for new entry.
Questions: What settings, code or buttons can I use to send/store data field information to a new table? What settings, code or buttons can I use to automatically clear all data fields from my form once data has been sent to the new table?
Auto Rearrange Fields Or Hide Fields In DataSheet Based On Criteria
May 17, 2007I have main form and that has one sub-form , this Main form governs/determines the data in the sub form.
This Sub form ( DataSheet Mode) has approximately 130 columns and based on the Main form criteria only ~ 20 columns has to be filled.
What I want to do is based on the main forms criteria I want to show only the columns that are applicable to main form criteria.
If I use Columnar or Tabular single form for the Sub Form I am able to hide the fields that are not required BUT IT LEAVES A SPACE/GAP on form ( for the hidden fields that are not required)
Private Sub Form_Load()
If Forms!frmShowPIforActiveAndCanAddNewPI!FrmSubFrmFi lterProductInformationPerFMT!CASETIF = True Then
Me.CASETIF.Visible = True
Else
Me.CASETIF.Visible = False
End If
End Sub
And If I use DataSheet and hide ( visible = no) a particular filed it still shows up in Sub Form
Is there a way to Auto-Re Arrange all the fields in the sub form so that the hidden ( visible = no) fields no not leave gap
Or is there a way by VBA program to select fields ( Columns) from a table to be displayed on a sub form based on a criteria
Thanks
Rahul
Forms :: Adding Fields In A Table And Having Output Fill Fields On A Form
Jan 29, 2014I have a totalquery that runs fine and give me the sum for both fields I'm looking for but I can't get the outputs to fill the fields on the form. I have tried the Dcount query in the control source but that just returns an error and locks up access.
Code:
SELECT [Tble-wcDelays].Causedby, Sum([Tble-wcDelays].HoursDelay) AS SumOfHoursDelay
FROM [Tble-wcDelays]
GROUP BY [Tble-wcDelays].Causedby, [Tble-wcDelays].LinkingID
HAVING ((([Tble-wcDelays].LinkingID)=[Forms]![Frm-ePlusCent]![cleanID]));
That is the query.
Forms :: Total Query - Count Of Fields Based On Data In Other Fields
Jun 28, 2015I have a query that creates counts of fields based on the data in other fields, basically it tells me that in a table there are two entries with value ABC????? and three of DEF????? , the query works perfectly.
When I create a form to display this data and base the form on the Query I keep getting a message box asking for the ID (key field) from the base table.
If I type * in the box (to denote all values) and press enter I get the results expected.
Tables :: Set Up Validation Of Fields Unit And Size Based On Another Fields Data?
Nov 18, 2013Basically in my order details table i have the following fields
Product
Unit
Size
At the moment i have the Product field with a dropdown that gives me all the products from my ProductT. But once i choose the correct product in the unit field it gives me all the possibilities of every product not just the units associated with that product. ie
ProductT
Grasshopper Box1000 Adult
Grasshopper Box1000 Subadult
Worm 10pz Big
When I select the grasshopper product and move on to the unit field i also get "10pz" option but this is not a product available.
How do i set up validation of the fields Unit and size based on another fields data?
Modules & VBA :: Pass Data From Fields Into Table And Reset Fields
Aug 27, 2013I have a database that will register the emails coming in and what time, also the time, date out and person.
I have a form with the fields to be filled in and a submit button. There are some fields that are automatically filled in and others need manually fill in.
below that part is a sheet (subform in the form of sheet) that should be filled in with the above data. Once it is there, it should empty the fields so they are ready to be filled in again. If I fill new data and press the submit button, it should go to the next available row.
Search Key Error 3709 On 2 Fields In The Table - All Other Fields Allow Update
Aug 21, 2013I have a copy of the back-end that gets a search key error 3709 on two records. In other words, I can duplicate the problem.
The interesting part is that I can update any other field on both these records and save the record, but when I try to change two specific fields, I get a Search Key Error and have to ESC out to continue (basically UNDO the change). Both fields are text fields with lengths of 7 characters and 255 characters, and both are COMBO Boxes on the form.
I tried to focus on the form think there was an issue in the code. I can definitely TRAP the 3709 error on the ON ERROR event on the form using "if dataerr = 3709", but then I tried something even simplier.
I went directly to the table and to each of the records. Again I can update any other field in the record but these two specific fields. When I try to change either of them and move to another record, you get a Search Key Error 3709.
By going to the table record directly I'm as low level as I can get. There are no validation rules on either field at the database level. If it was truly CORRUPT would it let me update any of the other fields on either of these records? One is an empid (not a primary key but is indexed with duplicates okay and not required), and one is status code (not a primary key but is indexed with duplicates okay and not required) so they're no critical fields, but something is keeping them from CHANGING.
Just tried something else; deleted the INDEXES on both the fields. Now it works! I am completely confused now because it really wasn't a corrupt record, but the indexes are causing the problem. Do I need to update the indexes somehow when the users selects a new empid or status code?
Combine Like Product Fields In Table And Total Quantity For Those Like Fields?
Apr 22, 2015I have a product table that includes the name of the product, the quantity ordered, and the unit price. This is a summary table for the whole year showing all of the orders. The Primary Key is [ID] from the [tblOrders] table. I attached a screen shot of my query. I don't know if you can see it. I want to generate a report where each product is listed once, the unit price for that product is listed, the total number of that item that was ordered throughout the year, and finally, the total amount spent for each item during the year.
View 2 Replies View RelatedHaving Some Subform Fields Auto Fill From Mainform Fields
Nov 2, 2005How can I get some mainform fields' data to be the first entry in a subform? From the mainform, I would like the Head of Household name and date of birth to be carried over to the first entry in the HouseholdMembers subform.
The two forms are tied to separate tables. For each household member I need to be able to enter full legal name, date of birth and some additional pieces of information such as income and source of income.
What I'd like to avoid is making the users enter the Head of Household's name and date of birth twice. Is there a way to carry that information over to the subform?
Thank you, Charlotte
Updating SubForm Fields From Main Form Fields
Jun 20, 2006Hey Everyone,
I am stuck trying to figure out this problem. I have a main form "frm_tirelog_600" which has 4 combo boxes "cboleg",
"cbocar", "cbopos", "cboserial" on it. The first 3 combo boxes are used as criteria on 1 of 3 subforms that I have.
The fourth combo box "cboserial" is used for the criteria in a query on another subform that I have called "frm_mount_600_subform",
which is independant from the main form, I hope I have explained that clearly enough. What I need to be able to do is
have the subform fill in 3 of the fields on it "leg", "car", "pos" with the value from the 3 combo boxes on my main form. I
can get it to show in the fields but not write to the table. I have searched the forum and have not been able to locate anything
that would work and really need any assistance with this. Im not real strong in the coding department which is where I
beleive this could be done.
I have attached a copy of my DB which I hope will better explain it. Any help would be greatly appreciated
Choosing Fields From Combo Box To Make Fields Visible
Aug 30, 2004I have a combo box linked to a look-up table. There are 8 fields in the look-up table but only if one of three is chosen do I want additional combo boxes to become visible. Do I put the code in the "after update" or "on change" event of the combo box and how do I express the code-
If TechniqueCombo="caudal" or "spinal" or "epidural" then
TextNeedleType.Visible=True
(am I close??)
Thanks
Updating FE Fields When Fields Are Deleted From The BE (after DB Split Obvs)
Aug 28, 2006Hey,
The database I am working on, I split a while ago to give it some security. Now i'm updating a related form, and i'm finding that if I delete and add fields in the BE, the FE fields (being the fields that I need to insert into the form so the data entered propogates to the DB) are not updated.
How do I update the FE?
Thanks.