Need Help With Double Click Open Form Code
Dec 14, 2006
Hello..
I have the following code that I have been trying to get to work:
Private Sub txtSocNumber_DblClick(Cancel As Integer)
On Error GoTo Err_txtSocNumber_DblClick
Dim stDocName As String
Dim stLinkCriteria As String
stDocName = "FrmApplicantFullDetails"
If IsNull(Me.txtSocNumber) Or Me.txtSocNumber = "" Then
MsgBox "This record is empty", vbInformation, "No Data"
Me.txtSocNumber.SetFocus
Else
stLinkCriteria = "[ApplicantID]=" & Me![InvestigatorID]
DoCmd.OpenForm stDocName, , , stLinkCriteria
End If
Exit_txtSocNumber_DblClick:
Exit Sub
Err_txtSocNumber_DblClick:
MsgBox Err.Description
Resume Exit_txtSocNumber_DblClick
End Sub
I have the following two tables:
Applicant and Investigator
Applicant:
ApplicantID
InvestigatorID
etc
Investigator:
InvestigatorID
etc
The relationship is setup as 1 investigator to many applicants.
What I am trying do is this. I have form with a subform in it. In the subform there is applicant info IE SS# LName, FName and that is it. What I want to do is be able to double click on the SS# have the form "FrmApplicantFullDetails" open so you can view the work up on the applicant or edit info on the applicant.
Am I going about this the right way with the above code? Or is there something else I am missing in the code or is there code out that will do what I am looking for that is easier?
Thanks
R~
View Replies
ADVERTISEMENT
Jul 11, 2006
I have a few search forms that, when search parameters are entered, a continuous subform displays the results (summarised...not all fields show).
I want to be able to double click a field in any given record, and have it open in a form allowing editing of the record.
I know I need something in the OnDoubleClick event of the text box I want to double click, which would then open the form, but I don't know what code to use.
For the sake of argument, I want to double click on the txtSerialNumber text box to do it, as this is a unique field.
Thanks.
View 7 Replies
View Related
Aug 16, 2006
I all I have looked in the forum but can't find anything that matches I have a form containing a subform called eventswich shows some events in date order, as I have too many information on the table events I could not put them all in the subform if not only the essential information, what I need is if I double click on the field "DATE" it would open the "EVENT" form and show me all the information contained in the record.At the present time I have the filed SELECT RECORD set to NO on the form properties!
Hope I have given a good explanation!!!!
Thanks
Marco
View 9 Replies
View Related
Jun 16, 2015
I have a subform 2SiteList (Datasheet View) with the field SiteName... i also have another form SiteDetails.
if possible i would like to be able to double click on a SiteName on the subform and have the SiteDetails form to open to show the full details.
View 1 Replies
View Related
Jan 27, 2014
I am trying to create a proposal log for my company to make things easier to track. I have made a multiple items form to list the proposals. I want to be able to double click the record to open up another form (that i have already created) that shows the information from the proposal table and the proposal details table. So.....
I want to double click the field named "Proposal Name" and have it open up to form i have called "proposals details form".
View 3 Replies
View Related
Sep 13, 2005
Private Sub tbxPoor_DblClick(Cancel As Integer)
Me.TtbxPoor= Me.TtbxPoor+ 1
End Sub
This simple event on double clicking a field on my form increments the number in the field by 1. There are 10 fields in all where I want the user to be able to do the same. Is there an elegant way to code this event for all those fields using one routine or is it best to add the event to each field?
View 10 Replies
View Related
Aug 8, 2006
Hi all I have a form with inserted a subform, I would like to double click on the field "date" on the subform to open the relative complete record on the original mask!
Thanks
M
View 4 Replies
View Related
May 15, 2006
greetings all..i have tried to use an old database template i had and re-work it for my new client..basically the user types a ref no into a search box.. there is a text list that is narrowed down to the chosen item as they user types..then they double click on the item in the list and it opens in the main form..this is how it should work.. i think im pretty close but im gettin a few problems.. i would be very grateful if someone could have a look at it...the form i want all this to happen on is called MAINFORM.. the database is very simple.. one table.. one query.. thats it..thanks..
View 2 Replies
View Related
Mar 2, 2006
i will show you my list box code. i would like to make it possible for my user to double click on an item in the list and it opens that record in my 'zEnquiry' form (which has the correct named fields to display the data already)
i had some double click code but i deleted it, and now ive forgotten which post i found it in.
here is the code for my listbox
Private Sub QuickSearch_AfterUpdate()
DoCmd.Requery
Me.RecordsetClone.FindFirst "[Enq_Forname] = '" & Me![QuickSearch] & "'"
If Not Me.RecordsetClone.NoMatch Then
Me.Bookmark = Me.RecordsetClone.Bookmark
Else
MsgBox "Could not locate [" & Me![QuickSearch] & "]"
End If
End Sub
View 1 Replies
View Related
Sep 15, 2013
I have a text box on my form which I use to attach hyperlinks to pdf's, this works great but after inserting a hyperlink nothing is displayed in the text box to show it has been linked unlike using attachment, the only way I know if that a hyperlink is placed is to right click and go to hyperlink and then open, is there a way to show the link on the text box and just double click on it to open the pdf. I am trying this as the size of the database will far exceed the 2gb that access allows if I just use attachments , even if I split the database (over 10000 pdfs )
View 2 Replies
View Related
Jun 21, 2013
I want to Double-Click on a row of a subform to open a related table/form that are connected with a common ID. So far, I tried the following code, but it does not work.
Private Sub PackingSlipT_subform_DblClick(Cancel As Integer)
Dim stDocName As String
Dim stLinkCriteria As String
stDocName = "ProductT"
stLinkCriteria = "[PackingSlip_ID]=" & Me.PackingSlipT_subform.Column(1)
DoCmd.OpenForm stDocName, , , stLinkCriteria
End Sub
View 14 Replies
View Related
Mar 15, 2012
In an ACCESS DATABASE I have 2 fields
-email_address
-language
I want make double click on email_address field and open a specific files msg
example :
double click on gimec.roberto@gmail.com
if the language is ITALIAN open in OUTLOOK file ITALIAN.msg
if the language is RUSSIAN open in OUTLOOK file RUSSIAN.msg
View 1 Replies
View Related
Dec 22, 2013
I need created a form frmFlight this form has two fields called DEP and ARR what I need is when the users types the 3 letter code in the DEP or ARR field if these do not match the any records in field AirportCode in the table tblAirport will highlite a error. Also I need to double click on the field DEP or ARR in the frmFlight and open the frmAirport with the specific record. Example if one of the records contain LCY by double clicking it will open the form frmAirport displaying the LCY record.
View 8 Replies
View Related
Nov 17, 2013
I want to add an event on Form Header when double click it will filter the values, which i did with macro, but could it happen on second time double clicking it it refreshes whole as original?
View 2 Replies
View Related
Aug 18, 2014
I have a datasheet view where the 1st field has an event.
Private Sub WorkOrder_Click()
DoCmd.OpenForm "Engineer Entry Update", WhereCondition:="[Workorder]=" & Me.WorkOrder
End Sub
The form "Engineer Entry Update" opens but the require data in not there until I press the WorkOrder_Click() again.Then it is populated. Why do I have to double press?I would like a single click to open the form a populate.
View 11 Replies
View Related
May 4, 2014
I'm in desperate need of a (simple I guess) code to allow me to send records from my listbox to a new form. Scenario goes as follows:
I use cascading combo boxes to narrow my available choices and finally end up with a listbox presenting the records filtered through cascading process. Now, I want to double-click on a record and load a new form with all this record's fields.
This is the code used to populate the listbox:
Private Sub FilterTypeList()
Dim strRS As String
' Filter the list box appropriately based on the combo box selection(s)
strRS = "SELECT qryTaxonomy.Type, qryTaxonomy.Article FROM qryTaxonomy"
[Code] ....
What is the code to open a form with the double-clicked record's fields, as described above?
View 6 Replies
View Related
Jul 27, 2015
In the past a Teacher would manually create a Form (Student Form) containing Student information, (Name, Gender, Birthdate, Homegroup) as well as additional issues on the student. This would all be saved into a table.
I would like to change this manual process of typing in individually to each text box, therefore, I have been able to run a report from a external program that obtains (Name, Gender, Birthdate, Homegroup). This saves as CSV and I am able to import into a separate table within the database.
This works no problem.
What I have set-up is a form that contains a listbox this contains the Student name and Homegroup from the imported table contents. Again this works fine.
What i would like to do is when a student is selected from the listbox and dbl clicked on, how can i make information (Name, Gender, Birthdate, Homegroup) populate the textboxes in the Student form that the teacher previously used? could this be an update query where the imported table information will then go into the Student form? If so, how can I tell the dbl click of highlighted name is the data i want to populate?
View 1 Replies
View Related
Sep 15, 2013
I have a mainform named EMA and a subform named Q_EMO. In the mainform there is one event related to a patient.In the subform Q_EMO there are all the events releted to the patient.I would like to get a record in the mainform EMA when I double click in the record of the subform.
View 12 Replies
View Related
Mar 1, 2008
I have a list of incidents in my Incidents Management Database. It comes up as a grid view when users open the database.
This is what it looks loke (paste the following into address bar of your browser. lh5.google.com.au/snehal.dabhi/R8oc22J_RfI/AAAAAAAABz0/bbIkCzg5whk/image001.png
I want particular incident to open in a form when users double click on any particular incident from the list above.
For example double clicking on the first incident (dated 1/03/2008 in the list above) should open the form below with THAT PERTICULAR incident. And double clicking on 22nd incident should open the following form with 22nd incident loaded, so users can edit that incident
please Paste the following into your browser to see the image.
lh6.google.com.au/snehal.dabhi/R8oc3GJ_RgI/AAAAAAAABz8/vGSjfr5rZ10/image003.png?imgmax=640
Any detailed help is much appreciated. – I am too new to understand macros and vba.
Thanks!
View 4 Replies
View Related
Aug 15, 2013
I have a main Form "Client" that shows details such as Representatives, phone numbers, status, etc. I also have a main report "CRM" that is a nicer summarized table version of all of my Client form entries.
The "CRM" form will be used by others in my office to see what clients we are contacting, etc. What I want to be able to do is have someone open the CRM form first. If they want to see even more specific info (not everything is included in the report, as that would be too messy), I want them to be able to double click the Client's name on the report and be taking to the corresponding entry on the Client form that shows more details.
Right now my code for the Report which is not working is the following:
Private Sub Client_Name_DblClick()'double click on a client name in the reportDoCmd.OpenForm "Client", acNormal, , "[Client_Name]='" & [Client_Name]'this should open the Client Form to the record of the same client that was double clicked on the reportEnd Sub
View 14 Replies
View Related
Dec 8, 2014
Trying to pull information from a text box on double click to populate a combobox on another form...
keeps coming up "type mismatch"
I call lngAccount as recognised on mouseover... ("Business Account" is the value I want)
I can't get it to work!
For info, the form I'm calling from is a subform located FrmMainMenu/FrmAccountsMainMenu and the control source is [Account]
the form I wish to populate in on FrmTransactions (it is a main form only) and the combobox is cboaccountselect - **I've seen the obvious mistake with no reference to this whatsoever, corrected it, and still not working**
View 5 Replies
View Related
May 3, 2014
When double click the entries given in the attached database I cannot open the correct form. it gives parameter value.
View 4 Replies
View Related
May 8, 2014
I am new to access and I recently encountered a double click issue
My form loads perfectly on double click event but it shows the first record instead of selected record.
My search is based on a PersonID but each PersonID has different WorkID that I wish to display on double click but it always shows the first WorkID instead of my selected record
I have tried changing the filters in the form properties but it still doesn't work for me.
Here's my code:
Private Sub SearchResults_DblClick(Cancel As Integer)
DoCmd.OpenForm "WorkForm", , , "[PersonID]=" & Me.[Searchresults], , acNormal
End Sub
[Searchresults] draws information from my Query
Query information:
PersonID... WorkID... Type......Location
1234..........1............Paint .....Address A
1234..........2............Electric...Address B
1234..........3............Floor..... Address C
View 7 Replies
View Related
Nov 7, 2006
Often I use Labels as buttons due to the fact I can colour them the way I want, and use the on click event to trigger code.
The code below however works for a command button, but not a label button.
DoCmd.OpenForm "frmdatetime"
Do While Forms!frmdatetime!OKFlag.Caption = "False"
DoEvents
Loop
When this code is run by clicking on a command button, it works fine.
If run by clicking on a label, frmdatetime opens, but the mouse will not work on either of the 2 open forms unless you go down to the windows task bar, jump onto another window, and back onto frmdatetime.
If I remove the loop with the DoEvents in it, then the problem does not occur.
Can anyone enlighten me as to why this behaviour occurs.
Thanks
Richard
View 4 Replies
View Related
Apr 6, 2006
Morning, all...
Hoping someone can help me with this. I have a form (one-side) with a bound continuous subform (many-side). I have a second unbound subform, also continuous, which is used as a reference only (no data entry) to select the record to be added to the bound subform. Is it possible to set it up so that, when the user double clicks on the pk from the unbound subform it adds that pk as a new record on the bound subform?
Thanx in advance for your help with this ;<)
Karen
View 2 Replies
View Related
Nov 2, 2007
I want to lookup a list of employees (in a form) and by double clicking a name listed, have that name pasted into another form or Sub form to add details to it.
I want to select a number of employees and add info such as attending a training session, plus the topics covered, instructors name etc. I want to add this info once but relate it to a number of employees who attend the training???
View 1 Replies
View Related