I have 2 reports that use a separate query to pull their data. One Query is called "Outdoor Lighting by Model Number Full Query".It is very simple, pulling just 4 pieces of data, SQL code is as follows:
SELECT DISTINCT [Call Log].[Model #], Sum([Call Log].Quantity) AS [Sum Of Quantity]
FROM [Call Log]
WHERE ((([Call Log].Date) Between [Forms]![Date Range Entry]![Start Date] And [Forms]![Date Range Entry]![End Date]) AND (([Call Log].[Product Type])=4))
GROUP BY [Call Log].[Model #]
ORDER BY Sum([Call Log].Quantity) DESC;
I run a report named "Outdoor Lighting by Model Full Report" which takes the above query. The detail portion of the report only has 3 sections:
Model #, Quantity, Percentage. Quantity I have showing "Sum Of Quantity" and Percentage is showing "=[Sum of Quantity]/Sum([Sum of Quantity])" Therefore, for a particular model # it gives me the number and then calculates what percentage that number is of the total. Works fine.
My second report is laid out exactly the same, except it pulls data from a different query that only returns the top five results. The code for that query is as follows:
SELECT TOP 5 [Call Log].[Model #], Sum([Call Log].Quantity) AS [Sum Of Quantity]
FROM [Call Log]
WHERE ((([Call Log].Date) Between Forms![Date Range Entry]![Start Date] And Forms![Date Range Entry]![End Date]) And (([Call Log].[Product Type])=4))
GROUP BY [Call Log].[Model #]
ORDER BY Sum([Call Log].Quantity) DESC;
The second report, appropriately named "Outdoor Lighting by Model Number Top 5 Report" only shows the top 5 and then gives a quantity and calculates a percentage. My problem is that the percentage is calculated based off of the total of just the top 5 query. I need it to calculate based off of the total of the full query.
I currently have percentage doing this "=[Sum of Quantity(Top 5 Query)]/Sum([Sum of Quantity(Top 5 Query)])".What I want it to do is this "=[Sum of Quantity(Top 5 Query]/Sum([Sum of Quantity(Full Report Query)])
I have a table with application records. One of the fields captures schools the applicant will work at. This field stores data in comma delimited format. There could be 1 school name; there could be 5 school names.
My ultimate goal is to build a report which shows me records of all applications, grouped by school choice. I want to see: School A was selected by 5 people, School B was selected by 7, etc.
Is it possible to write a query from this table that will enable this?
I'm pretty new to Access, so if I'm doing this the hard way, that's why.
I work in a quality control position, and I'm trying to set up a single Access database for the QC staff to use instead of everyone having their own seperate Excel workbooks.
The issue I'm running into at the moment is on a report. Each record is graded on four seperate types of criteria, Error Type 1, Error Type 2, Error Type 3 and Error Type 4, all of which need to be reported on seperately. So I have at least four queries set up, all with the same parameters (right now, just review date.) I'm trying to pull through all four queries on the same report, and so far I've had success having the report ask for the parameters only once and then applying it to all four queries. However, I'm running into a problem where Access is now forcing the filters of each individual query on to each of the other three queries, so it's only pulling through records for all four queries that match the criteria of all four. Any record which only matches the criteria of one, two or three of the queries is being left off the report.
Sorry if this sounds confusing. Anyone have an idea as to what I'm doing wrong?
I need to produce a Data Integrity report that lists the users of a separate database and the count of errors that they make, separated by error type.
Currently my query displays all the users who made errors, and the total errors they made. But I don't want the total - I want to break this number down by the types of errors that are made.
I modified the SQL to make it easier to read. How can I take the below statement and make a few expressions that count up the specific values? The field I need to dissect is "Type Error" and a couple of examples of error types are "A1" and "B1"
Code: SELECT DISTINCTROW [Errors Table].User, Count([Errors Table].[Type Error]) AS [Errors] FROM [Errors Table] INNER JOIN [Workcenter Profiles] ON [Errors Table].PWC = [Workcenter Profiles].PWC WHERE ((([Errors Table].[Review Status])="Error Corrected")) OR ((([Errors Table].[Review Status])="Error Not Corrected")) OR ((([Errors Table].[Review Status])="Error Not Correctable ")) GROUP BY [Errors Table].User ORDER BY [Errors Table].User;
I've seen it done with multiple queries joined together, but I'd like to avoid that if possible...
I posted the following code on a button (report to a first sergeant). I can't pull e-mail addresses from the report (rptLateByUnit).
=========
DoCmd.SendObject acSendReport, "rptLateByUnit", acFormatPDF, Me.CCF_EMail, Me.CCS_Email, , "FOUO: Open Personnel Data Discrepancies", "This document contains information which must be protected in accordance with AFI 33-332, Air Force Privacy Act Program, and DoD Regulation 5400.7R, DoD Freedom of Information Act Program; and Privacy Act of 1974 as amended applies. This document is For Official Use Only." & vbCr & vbCr & _
I have a slight problem here with a database program I am designing. I have two excel spreadsheets, one created by one department here, and the other created by a second department.
I have the access program importing the relevant fields from both programs into 2 tables. Table 1 is the listing of employees in the company and their info (minus the location where they work). Table 2 is the listing of employees who are in this facility.
I need to prepare a report of all employees in this facility who appear on the other table.
I have a field in each table (both called F1) with the employee names.
Is there a way I can run a report in Access where it pulls all the info I need into a Report as long as the name appears in both tables F1 fields?
Even if I can create another table based on that info, and then just do a full dump to a report from that new table, that would be great.
I am not familiar with VB or SQL really, but I figure something like this would be doable, I just don't know how to go about writing it :
If Table1.F1 == Table2.F1 Then { Append Table1.* INTO NewTable3 }
Something where if the name on F1 in Table1 matches the name on F1 in Table2, it takes all the data from that record and appends it or dumps it brand new into a NewTable3..
Here is my delima, I have a report that I am able to type in a keyword and it will pull up that report exactly as I type the keyword, however, let's say that I want to pull up someone else's report I cannot. I have to exit out of my report and then go back into it and resubmit the new search.
I have a report with a calculated field. This calculated field needs to pull the value or total from a field in another report. I think the formula is : =([AssmntC].Reports!totalreqamnt4) but I'm getting ?Name as the result. The report is AssmntB where I need to have the value copied. The original report is AssmntC and the field is totalreqamnt4 where the value is originally calculated. totalreqmant4 is also a calculated field which sums fields from a query.
I have fields on the main menu where folks put in a start and end date prior to running a report. I'm doing a monthly report that pulls current month, and two prior months of data. For example, the user selects a date range of 10/1/14 to 10/31/14 the report will show August, September and October results.
I need the column headings to change each month depending on the date range they select to run the report so in November they will pull 11/1/14 to 11/30/14 and get September, October and November.
The headings for the columns would then adjust.
I put an unbound text box with the formula as follows in the control source of the report page header to pull the month that is equal to the current month minus two (I'm just showing one of the column headings formula):
I'm trying to have users enter multiple IDs from a table into a text box separated by newline chars, and then (once they press a button) have some sort of macro or code read each line and pull a report I've created based on the ID. Is that possible?
I have a text field in a Table and on a Query called "Notes" In that field that has data like below:
[04/02/2015:BD] Project is to be assessed by Solutions Planning [03/27/2015:BD] Project prioritized [03/14/15:BR] Entered to system
Im trying to find a way to pull just the most recent line of text, in this case
[04/02/2015:BD] Project is to be assessed by Solutions Planning
into the field next to "Notes" or wherever - an empty field in the query. I searched around, found some stuff and I was thinking of having the code look at the first "[" and count the length to the next "[" and pull out whats in between. Looks like the bracket causes issues in the module.
I have two tables, one table Data has member(SUBSCRIBER_ID) data including service rep(UserName). Another table ServCoord has data including service rep and their manager. What I am trying to do is pull 5 random accounts per service rep. I can pull 5 random accounts, but not per service rep. I have currently 77 service reps. Is there any way I can pull 5 random accounts per service rep? Here is my starting point so far.
SELECT TOP 385 [Data].SUBSCRIBER_ID, Rnd(1) AS Expr1, [Data].UserName, Rnd(Len([UserName])) AS Expr2 FROM ServCoord INNER JOIN [Data] ON ServCoord.ServCoord = [Data].UserName GROUP BY [Data].SUBSCRIBER_ID, Rnd(1), [Data].UserName, Rnd(Len([UserName])), [Data].SUBSCRIBER_ID, [Data].UserName HAVING ((([Data].UserName)<>"NULL")) ORDER BY [Data].UserName, [Data].SUBSCRIBER_ID;
I have 1 query that connects 4 of my tables through a tracking number. I am trying to make it so the value (DStatus) from DTable will populate where a (DStatus) is provided, but where there is no (DStatus) the column is filled in with a (SStatus) from STable. There is always a SStatus for each tracking number, but not always a DStatus, where there is a DStatus, it is more accurate.
Can I do this all in 1 query, whether I have to make a new column within my query for this to work, whether I need to have my query output into a table first.
Is there something I could type into the Criteria field of my query.
I have tried using Nz([DStatus],[SStatus]), an Iif Statement, the IsNull function, etc with no avail.
Most employees have 10 to 15 rows. I only want to pull ALL rows for employees ONLY if there is a distinct count from DATE_PAID greater than 1. There are cases where an employee might have two pay checks generarted for the same PAY_DATE.
I have a query that pulls data from the following fields in 2 different tables:
Area1FloorPrep (tblFloorPrep) ex. remove ceramic tile Area1Size (tblInstallationAreas) ex. 20 s/f, or just 20 Area2FloorPrep (tblFloorPrep) Area2Size (tblInstallationAreas)....
All the way to Area20 (Floorprep and InstallationAreas) for both tables. I have created an installer invoicing form that pulls the data from the workorder that these fields are located in, but the problem I'm having is that I don't know what kind of query to create to concatenate the data in the 20 fields and concatenate the size of the areas next to the appropriate concatenated floor prep description. Is there a way to do this without coding?
I have two tables: Table #1) [Request Table] Customers request our company to stock a certain Part Number with a minimum value. Ajax - P/N "NP4i" - Min "30".
Table #2) [Sales History] All sales purchased and the "Qty-Total" purchased. For simplicity Fields are limited.I created a CrossTab Query that displays from [Request Table] P/N's requested/ min values (Row Headings) then showing P/N's purchased [Sales History] Value="Qty-Total" Sum and
Column=Format([Invoice Date],"mmm/yyyy") group by, showing last twelve months. Ex: Customer name, Part Number, Minimum, May/2013, Apr/2013, Mar/2013 and so on. AJAX, NP4i, 30 4 21 5 and so on.
The Crosstab query list only requested Part Numbers that have at least One sale wihin the last twelve months.If there are NO sales, the crosstab query will NOT show this Part Number.My boss wants to see the requested Part Numbers that were never purchased along with the ones purchased.He wants to address the NO sales, yet they requested we stock that particular Part Number for them.
Is there any criteria I can use to force the Part Number field on the [Request Table] side to populate even though there were NO sales within the last twelve months?
I have a form that is used to book a new event for a client who is already in the database.Within that form I have a subform that is based on a query which displays information from that client's previous event. I did this using a solution found in the following thread: URL...It is based on pulling the second to last record that is related to the current client. It works perfectly when booking a new event that has taken place on a previous date. However, if the previous event occured on that same date (but at a previous time), it doesn't register.
I would prefer a query that would pull the record previous to the current one, instead of pulling the second to last record out of all that client's events.it would also mean that if more events are booked, then a past event is opened in a form, the sub forms in that form will display the event just prior to the current record.
I have 3 tables invoice, customer and items. I need to create a query that will get the next invoice number from the invoice table and mark that invoice number in the items table for a set customer where the invoice field in the items table is blank.
The invoice table is now set up as a autonumber, therefore I need to append to get the last new number.
The items in the item table are unique and this is why I want to mark the invoice number in the item table field invoice.
I have a query built that gives me info per employee. I built a question into the criteria that ask for the employees name. When a person types the name results are given. If the person mispells the name, results are not given.
I have everyones name on a seperate table. How do i create a pull down menu on the query to choose the names?
I have one table let's call is table1. It contains about 5 columns with standard employee data with about 10,000 rows of data containing about 1,150 employees. All employees have multiple rows of data. There is one column titled JOB. I need to pull all rows of data for each employee ONLY if there is at the minimum one value for the employee in the JOB column. I do not want to pull employees that have no values in the JOB column. They can be excluded from the query.
Example of all record for one employee. I need to pull all rows of data ONLY if the employee has a value in the JOB column.
Name EE_ID JOB CAT EFF_DATE
John Doe 1006 CLERK F 01-JAN-2010 John Doe 1006 P 21-JAN-2010 John Doe 1006 CLERK P 01-FEB-2011 John Doe 1006 F 01-MAR-2011 John Doe 1006 P 01-APR-2011 John Doe 1006 CLERK F 01-JUL-2012
I have 2 tables with the same field names, but different data. I need to check if one person is linked to different companies.Both are linked with CompanyID. When I look for a person via the last name (field is called LastName), it should show me from both tables the rows that this person is in. how can I construct this kind of query?
P.S. I want to select all the not just a few from both tables
I have 9 seperate tables - each of the tables has similar headers
Claim # Agent Pass/Fail Request type Record Date
I have built relationships between all the tables. I am attempting have a singular query be run based on start and end dates under "record date" . I have the criteria already set. But when I run the Query no information is pulled. How do I get the query to pull this data from all 9 tables?
I have a query that holds data based on a field. If the field [Device In] is "TimeStation-1" in TblTime for example it holds "AV" in the field [House]. Trouble is some fields are blank and when this is so I want it to pull the last two letters from the [Notes] field. I have attached the database. The query is [QryDeductionsandSleep Ins].
