Need Solution To Read Data In Both Capital/small Letter
Nov 13, 2006
Hi,
In one of the column of a table of my SQL Server contains around 500 employee names. Some of them are written in capital letters and some are not. Some of them with first character capital and rest all small.
I am using FE as MS Access. When user search the record thru a normal textbox (behind which I put small bunch of code to get the desired data in sub-form) user must enter searching name in the textbox in the same fashion the actual data available in the table.
e.g. let us say the employee name is John
User who searching John’s record must enter first letter capital otherwise it will not search. Why like this if table in on server.
This doesn’t happen when table is local in access. What is the solution to this?
I have a set of data and some are in capitals and some are not. This set of data is meant to be used for a mailing, and the home style of my company only allows the first letter to be a capital, the rest should be normal letters. Anyone have an idea how I can arrange this?
Hi. I have a load of records, that some of the first letter of a field, are not capitals, otherwise they are ok. the are loads of them though, so would take too long to go through by hand, is there a query i can run, to check it and change it if not? Thanks Alex
I'm designing a database in which the primary key is a combination of the first letter of first name, the first letter of last name and the date of birth.
I am trying to insert data into a table through a combo on a form. Originally, I had the text field size set at 15 characters, but the data I wanted to enter changed to 25 characters in length, so I changed the field size to 25. I then got the following message:
"The field is too small to accept the amount of data you attempted to add. Try inserting or pasting less data."I increased the size, but still got the message. I even took the size right up to 100, but still got the message!
All, I have inheirited a database which I am attempting to query via an SQL statement:
"SELECT * FROM MYTABLE ORDER BY SheetNumber;"
This query works fine under Access but when executed thru ADO 2.5 / Microsoft.Jet.OLEDB.4.0 from VB6 it reports the following error ("2147217833"):
"The field is too small to accept the amount of data you attempted to add. Try inserting or pasting less data."
First things first, I'm not trying to add/insert/paste any data (see SQL statement above). Secondly, when I remove "ORDER BY SheetNumber" from the SQL statement the error does not occur. I need to retain the ability to sort and would be grateful for any help/suggestions.
For your reference SheetNumber is defined as a 20 char Text field in Access.
I currently have a drop down box with four options in there and the options are:
Low Minimum Medium High
However when i change the options in the table to:
Low Moderate Significant High
it comes up with the error message: the field is too small the accept the amount of data you attemtpted to add. Try inserting or pasting less data.
I do not understand what is wrong with the second option of words? The maximum for characters is set to 255 so i am not sure why it is coming up with that error message.
Hi folks, I have a query that returns about 3500 records (and runs very well I have to say). the issue comes when I attempt to export that queries results to a comma seperated text file. It gives me the message that the field is too small to accept the amount of data..bla bla bla... I've looked this up and it mentions stuff about memo fields and issues with that, but I don't have any memo fields in any of the tables that this is pulling information from. Does anyone have a clue why this would be happening...please help..this is urgent.
I get the error message "The field is too small to accept the amount of data you are trying to add. try inserting or pasting less data." I'm not attempting to run an insert or update query.
Access Help lives up to expectations by just repeating the error message, and the posts I can find on the forum which mention this error all seem to include something about a maximum of 254 characters in a field. None of mine are anywhere near that amount.
Does anyone have any idea what could be causing this?
I am developing a membership data base from a MS Template. It aleady has the means to print member lists and invoices, but no letters. I would like to also have the capability of writing a letter to one or all of the members directly from the data base.
ok here is what i want.. imagine a search box, just an empty text box that allows the user to type things into it...
there will be a simple table from the database behind it, here is the typical structure of a record
<Country>Poland <Price1>60 <Price2>85 <Price3>95
in this table there will be say a 1000 of these records... my user is going to have to quickly search through these records while on the phone to a customer, and quote one of the relevant prices associated with that country
what i would like is this most convenient system.. as the user types in the letter 'P' just below all the records with countries that begin with 'P' are displayed (with a scroll down arrow if needed)..as well as the 3 relevant prices with that record
if they then type an 'O' into the box (which will now hold 'Po') all the records with countries beginin with 'Po' will be displayed (eg Poland)
if they delete the 'o'. once again the displayed records below the box will return to just the countries begginin with 'p'
all that is needed is for the records to be displayed, thats it.. but the adding and deleting of the letters within the text search box will need to instantly manipulate this list..
i have posted on other forums, and have been told this can be acheived in access, is it hard?
Hi, I have an address database and in the zipcode/postcode box, i want all letters entered to go to capitals ie rj20 4ls would go to RJ20 4LS after update. how could i do this, what do i add to text boxes after updat? Thanks
I am creating a form in my database and would like to know if there is a way I can default each starting letter of my surname and address fields with a capital (but leave the rest in lower case)? I feel that it looks more professional.
When enforcing referential integrity, does access get angry about capital letters?Or just in general, if an address gets put in with a capital letter in one instance and then without in another does it make a difference?
Hey all, I need data in a table to be read only, once its inserted no one will be able to modify with the exception of a admin, how can i go about doing this/.
in access, how can I read data from two different tables and show the result in another table? in details:
i have two tables named hydraulics and mechanics. i want to read the data "reliablility" from table "hydraulics" and "reliablility" from "mechanics". and then i want to multiply these values and show in a newly created table as "results".
thanks for visiting and answering.
p.s: my file is attached, everything in german, sorry.
Hi, I know this has to be simple, but when I test a Data Access Page on my local machine I get an error that says "data source field is read only". I've made these pages before and never had a problem with writing to the database using a DAP. The database is not read only. Any ideas?
I have read only access to a database maintained by a vendor. I am using an append query to search for new records in that database every time my database opens through a macro. This adds any new records to my table. I then add additional information to each record in my table. This is newly acquired information, not calculated, and it is different for each record.
My question is can I keep my table up to date with the vendor table without running the append query macro at open every time as my database may remain open for extended periods of time during updating of records.
Is there a way to format a memo field to ensure that sentences begin with capital letters. There might have been something in the strConv function, but it seems my hopes are dashed?
Hi all, I'm so tired of looking... please help me!!
I have an Access Data Access Page based on a query which is not updatable.
The query is based on a many-to-many table (e.g. OfficeProducts with foreign keys for OfficeID and ProductID and an Amount field). The query is not updatable as I have included outer joins to the Office and Product tables to get all their records back.
(I'm not sure if I've done this the best way, but need to be able to list all the possible Products for each Office whether they use them or not.)
I want the user to be able to update the Amount field, so e.g. if it is currently set to 50 to be able to change it to 40, or if it is currently null (as there is no record so far for that OfficeProduct) then to insert a record into OfficeProducts with the OfficeID, ProductID and Amount value entered.
I thought this would be straightforward by creating a new textbox in the same section as the current Amount field, calling it NewAmount and letting the user update this, fire an event trigger to either update or insert into the table, and refresh the query and record on the form/DAP so that Amount shows the newly updated/inserted value.
I have been searching for ages... cannot locate either the best event or events to use for this nor the code to enter!! Please please help!!!!! (This is actually for a charity helping people suffering from emergencies in developing countries, not OfficeProducts, so your spot in heaven will be reserved if you can help ;) Thanks)
Was wondering how i can import data from a file to a table in different fields. The data inside the file is described with the number of characters and space's between. The attached file has the data.
For example in the file attached, the first four characters represent a data like 'ticket number' and maybe the third line 6 to 10 charcaters represent 'name of a passenger'.
Now how do i import these data to a table into respective fields in a table.
Moving to new computer, both under Win XP pro, Access 2003. New computer is MacBook Air running Parallels. Transferred Access database via an external hard drive. Now the data shows up as Read Only. Is there a procedure to run down the cause and make the data accessible?
