I would like to alter this statement so that any number less than 20 is "PRIMARY", any number between 20 and 26 is "SEC" and any number greater than 26 is "SEC2". I think I need to add another IIf() but I'm not really sure of the syntax.
SEC_NR: IIf((Left([BAY_NR],2)>=26),"SEC2","PRIMARY")
Hi all,
I would like to see some tests and benchmarks for different types of processors - celeron, p4m, centrino, amd e.t.c.
Do you know of a good site I can visit?
Fuga.
Hi
I have just designed a central training database to aid in the running of our training department.
One section is for an IT course which contains 8 modules.
The tests have the following IDs
Mod 1: ID05, ID06, ID07, ID08
Mod 2: 2.1, 2.2, 2.3, 2.4
Mod 3: 3.1, 3.2, 3.3, 3.4
Mod 4: 4.1, 4.2, 4.3, 4.4
Mod 5: 5.1, 5.2, 5.3, 5.4
Mod 6: 6.1, 6.2, 6.3, 6.4
Mod 7: 7.1, 7.2, 7.3, 7.4
Mod 8: 55, 56, 57, 58
One person may take any of the tests.
If someone completes Mod1, 2 and 7 they achieve Level 1
Similarly if someone completes Mod 3, 4, 5, 6 and 8 they achieve Level 2.
I need to run queries to find who has completed L1 or L2 or both.
Obviously they only achieve if they pass so in that table there is a status field with
Pass
Fail
Wait
As the options
Queries have never been my strong point and I was hoping someone here could help me.
I’m using XP Pro, with Office 2003 and the office 2000 db format.
Many thanks
Dazzy
Hi
how would one go about nested IIF
New Sal : IIf([emplsalaryaa]>80000,([emplsalaryaa]+([emplsalaryaa]-80000)/(100)*9)+7713.98)
i have the above but i need to put one more
iif
i have tried , IIF but it does not work
i don't know why?
Asad
My first post ever... so here goes.
My Goal:
Columns of data contain date fields & "Status" that indicates where a case lies. I'm trying to calculate days spent in a specific area (determined by status code) and total amount of time spent there all together. Status code begining w/ "I***" means case was sent to an area, w/ "R***" it returned. I have it together up to a point. My problem lies with end of expression where I want to calculate last date at specific location to now. In line 1 it would be from 5/03/07 to now since no r162 follows & blank field follows. Problem is with second IIF - it acts independently instead of giving false value from first IIF... i think.
status1 date1 status2 date2 status3 date3 status4 date4
1) I162 5/3/07 I004 5/20/07 I006 6/1/07
2) I162 4/2/07 R162 4/30/07
My failure:
stat2n4: IIf([status2]="i162" Or [status2]='i062' Or [status2]='i009' Or [status2]='i159' And [status3]<>'r162' Or [status3]<>'r162' And [Status4]="r162",DateDiff("d",[date2],[date4]),IIf(IsNull([status4]),DateDiff("d",[date4],Now())))
I have placed a tab control within a tab control (which I have done before). The problem is that the sub tab control appears on every page of the main tab form (encountered this before). I fixed it in the past by placing code on the on open event to make the sub tab control not visible unless the appropriate tab is selected. That worked fine.
I have tried this in the new program and find that when I set the value of the main tab form to 4 (the page index of the tab) the sub tab form will not display at all. However if I set it to zero it will display regardless of which tab is selected. Confusion has now set in :confused: . Any thoughts out there on what I have done incorrectly.
[/CODE]Private Sub Form_Open(Cancel As Integer)
'Me.OrderBy = "RankNo desc"
'Me.OrderByOn = True
If TabCtl44.Value = 4 Then
TabCtl144.Visible = True
Else
TabCtl144.Visible = False
End If
End Sub[CODE]
Poor old Access. I think I've made it wave a white flag, but based on the following expression I am trying to get it to evaluate, I'm not too surprised...
The situation is that I have a large number of tick boxes on a form, which nicely filter through to a series of fields in a table whose values are either -1 or 0 (according to if the box is ticked or not). Unfortunately, I now need to generate a small piece of text for a report based on which boxes have been ticked. Deep breath...
institution:
IIf([people].[memctf]=-1,"CTF",(
IIf([people].[memwt]=-1,"Westcott",(
Iif([people].[memwy]=-1,"Wesley",(
Iif([people].[memry]=-1,"Ridley",(
Iif([people].[memwm]=-1,"Westminster",(
Iif([people].[memiocs]=-1,"IOCS",(
Iif([people].[memermc]=-1,"ERMC",(
Iif([people].[memmbi]=-1,"Margaret Beaufort Institute",(
Iif([people].[memcjcr]=-1,"CJCR",(
Iif([people].[memcym]=-1,"CYM",(
Iif([people].[memindepba]=-1,"Independent BA",(
Iif([people].[memhmc]=-1,"Henry Martyn Centre",(
Iif([people].[memregchelm]=-1,"Regional (Chelmsford)",(
Iif([people].[memregnor]=-1,"Regional (Norwich)",(
Iif([people].[memregpboro]=-1,"Regional (Chelmsford)",(
Iif([people].[memregalbans]=-1,"Regional (St Albans)",(
Iif([people].[memdiocedsips]=-1, "Diocesan (Eds and Ips)",(
Iif([people].[memdiocnorwich]=-1, "Diocesan (Norwich)",(
Iif([people].[memreg]=-1, "Regional", "Unknown"
)))))))))))))))))))))))))))))))))))))
The logic seemed to work nicely when there were just 3 options in the list, but when I try to enter the above, Access says "the expression you entered is too complex". Poor baby! :D
Does any one have any idea how I can get it to evaluate the data I need?
I have a nested IIF that I cannot get figured out. This is what I have so far:
Hours: IIf([Dept]="10",55,Format(IIf([EorDCode]=" 1",[Regular]/60,[OT]/60),"Fixed"))
The problem is that I need another IIF to differentiate between Regular and Overtime. It needs to do this.
If Dept = 10 Then
55 Regular Hours and 0 Ovettime hours
Else
Format(IIf([EorDCode]=" 1",[Regular]/60,[OT]/60),"Fixed"))
Hi,
I am facing a problem trying to calculate the commission for the order I have within my Access application.
I pull up the information from three tables to determine the commission. Commission is based on Currency then subtotal then percentage for each specific client.
Can you please look at the below query and tell me what seems to be the problem.
If the commission is anything other than USD, CAD, EUR or GBP I will calculate normal commission.
Commission: IIf(Currency="USD" Or "CAD",IIf Quantity>1000,USD_Commission2*Quantity,USD_Commission1),IIf (Currency="GBP" Or "EUR",IIf(Subtotal>100000,Subtotal*EUR_Commission2,EUR_Commission1),I If(Subtotal>10000,Price*Quantity*Commission1)))
I'm trying to add a set of Nested IF statements, but it's not showing me the proper result. I have a table which shows the classes that each student has taken based on the term. So I change the letter grade they receive to a numeric value, once I get that, I need to add those numeric values. Here is the nested IIF statements.
SELECT spriden_pidm, spriden_id, spriden_last_name, spriden_first_name, sfrstcr_term_code, sfrstcr_crn, ssbsect_subj_code, ssbsect_crse_numb, sfrstcr_grde_code, GPA,
SUM(IIF( ssbsect_subj_code in ("CHEM", "BIOL", "PHYS") and sfrstcr_grde_code = "A" , 4.0 ,
IIF(ssbsect_subj_code in ("CHEM", "BIOL", "PHYS") and sfrstcr_grde_code = "A-", 3.7,
IIF(ssbsect_subj_code in ("CHEM", "BIOL", "PHYS") and sfrstcr_grde_code = "B+", 3.3,
IIF(ssbsect_subj_code in ("CHEM", "BIOL", "PHYS") and sfrstcr_grde_code = "B", 3.0,
IIF(ssbsect_subj_code in ("CHEM", "BIOL", "PHYS") and sfrstcr_grde_code = "B-", 2.7,
IIF(ssbsect_subj_code in ("CHEM", "BIOL", "PHYS") and sfrstcr_grde_code = "C+", 2.3,
IIF(ssbsect_subj_code in ("CHEM", "BIOL", "PHYS") and sfrstcr_grde_code = "C", 2.0,
IIF(ssbsect_subj_code in ("CHEM", "BIOL", "PHYS") and sfrstcr_grde_code = "C-", 1.7,
IIF(ssbsect_subj_code in ("CHEM", "BIOL", "PHYS") and sfrstcr_grde_code = "D+", 1.3,
IIF(ssbsect_subj_code in ("CHEM", "BIOL", "PHYS") and sfrstcr_grde_code = "D", 1.0,
IIF(ssbsect_subj_code in ("CHEM", "BIOL", "PHYS") and sfrstcr_grde_code = "D-", 0.7,
IIF(ssbsect_subj_code in ("CHEM", "BIOL", "PHYS") and sfrstcr_grde_code = "F", 0.0,)
)))))))))))) as ppp
from temporary2
GROUP BY spriden_pidm, spriden_id, spriden_last_name, spriden_first_name, sfrstcr_term_code, sfrstcr_crn, ssbsect_subj_code, ssbsect_crse_numb, sfrstcr_grde_code, GPA
When I run this, it doesn't add the values, It just changes the value from the letter grade to the number and that's it. I need them to add. I'm I missing something?
I think I have looked at this too long!!! If "tblJobs.ServiceTypeID" is other then 1 or 7 it still returns 3%..... wheres my error!?!?!?!? :confused:
Commission: IIf([JobInvoicePaid]=True And tblJobs.ServiceTypeID=1 Or 7,(([ContractPrice])-Nz([JobSubAmount]))*0.03,([ContractPrice])-Nz([JobSubAmount])*0.05)
Thanks
Hello,
I'm having a problem writing a query with nested iif's. This query is suppose to manipulate a text field that with #'s. Each field is either 5 or 6 characters containing a date such as "20607" or "10607" which is in the mm,dd,yy format. Can you have a nested iif statement such as below with multiple with 3 possible true conditions and only one false condition?
SELECT [date last stmt]
Iif(Instr(1,[date last stmt],"0")=1,Left([date last stmt],2)+"/"+Mid([date last stmt],3,2)+"/"+Right([date last stmt],2),
IIf(Len([date last stmt])=6,Left([date last stmt],2)+"/"+Mid([date last stmt],3,2)+"/"+Right([date last stmt],2),
IIf(Len([date last stmt])=5,Left([date last stmt],1)+"/"+Mid([date last stmt],2,2)+"/"+Right([date last stmt],2,"error")))) AS Newdate
FROM Exercise1;
Each time I attempt to run this query I receive a syntax error in query expression"[date last stmt]"
Any help is appreciated!!!!
I'm at a place in my design where I don't want to go further without advice for fear of really making a mess.:o
I have Products, Customers, Customer Locations, and Customer Models that can have any number of combinations. I've joined what I think makes sense at the lowest level, customers with locations, and next model with customers/locations.
I think products is the outer most junction, because many customers can use the same product in any number of models and locations.
The attached diagram shows where I am now--multiple junction tables, and junctions of junction tables. Now each of these tables has other relationships to nomalize things, but those are not shown.
Is one more level, or nest if you will, the right way to do this?
I did a search for Gouping and sums, but nothing really helped me.
What I am trying to figure out: I have a table where I am trying to use 4 fields in a query.
Vendor, items, Cost, Date1
- I am trying to Group by Vendor, Sub-Group by Items (Easy, I did this)
- Now I am trying to Filter this by date1 (Easy, I did this)
But I would like to sum the Cost for the Groups, but not list every repeated item. For Example:
Vendor A Brush 100 1/1/2005
Vendor C Book 50 1/2/2005
Vendor A Brush 100 1/3/2005
Vendor B Pencil 10 1/4/2005
Vendor A Hat 50 1/5/2005
Vendor B Pencil 10 1/6/2005
Vendor B Pen 10 1/7/2005
Vendor B Eraser 10 1/8/2005
Vendor A Shoe 40 1/9/2005
Vendor D House 1000 1/10/2005
Doing a search from 1/1/2005 - 1/9/2005 we get:
FORM OUTPUT:
Vendor A Brush 200 2
Hat 50 1
Shoe 40 1
Vendor B Pencil 20 2
Pen 10 1
Eraser 10 1
Vendor C Book 50 1
Hello everyone,
I’m looking for some help with a “nested query”
I have four fields that typically have a quantity amount in them.
I also have a field with a date.
I would like to say something like this
If fielda = 0 and fieldb = 0 and field = 0 and fieldd = 0 and in the date field, the date is >30day from today’s date add a 1 to this field, otherwise leave it blank
Thanks a lot
Corey
Hello,
I have been working on a query for a few hours now to create a new field based on data in other fields in my table. Here is the code I am using:
MBkt: IIf([Table14].[OWNERGRP_1]<>"",IIf([Table14].[OWNERGRP_1]="ADVO",IIf([Table14].[PRICINGMKT]="SHAREDEX","SEZ"),IIf([Table14].[PRICINGMKT]="REP","REP"),IIf([Table14].[PRICINGMKT]="RIP","REP"),IIf([Table14].[COV_FREQ]="Weekly PCD","PCD"),IIf([Table14].[COV_FREQ]="Weekly","ADVO WKLY","ADVO MULTI-WEEKS"),IIf([Table14].[OWNERGRP_1]="ANNE",IIf([Table14].[OWNER_1]="MMSI/MAIL MARKETING/ANNE","ANNE MMSI","ANNE"),"SOLO"))
Unfortunately, I am unable to get this to work. Any help that anyone can provide is greatly appreciated.
Thanks,
-Brian
I'm tring to build a queary based on a field called "PLAN_CODE" and a policy issue date field. There are 3 plan codes ...select1, select 2 and select 3.
I want to pull information as follows
Select1 has an issue date 11 months ago (day the queary is ran)
select2 has an issue date 23 months ago
select3 has an issue date 35 months ago
I built a field to calculate the duration of the policy based on the issue date
Duration: (Round((POLICY_ISSUE_DATE]-Date())/365,1)). I think the format is wrong? need help with that!
I built a field to create a nested "IF" statement but the first "IF" is not pulling correctly, so I cant built the remaining "IF" statements.
Expr2: IIf([PLAN_CODE]="SELECT01N" [Duration]=-0.9,0).
Anyone have a better approach? Any input how to handle this? I'm not real good with VB code but have a general understanding of it. It's easier for me to build in the QBE.
Hey,
I am working on my first access project (please be patient and try to explain like to a child). My problems however are past the basic level so please bear with me ....
I am working on a datbase which deals with laboratory data from patients which have different date stamps - ie. each record has a 'valid time' (time of blood drowing) a 'transaction time' (time of entry into the DB) and 'delete time' (deleted recordes are just given a date and not really deleted).
The idea is that the user should be able to watch the status of the DB at different past dates (ie what did the doctor know about a patient blood tests a month ago when he made the decision to give him a medication which eventually harmed his kideneys). The user should also be able to change values of records, delete records (which means to add a date to the deleted date field) and to add new records.
I want to do it all using one form.
Things I have done so far:
1. Query by form which locates a specific record (Main-Form & singleRecQuery)
2. A subform in Main-Form which displays the results of singleRecQuery (Single-subform). The query and subform aer updated by a macro once I enter all the data into main-form.
3. A qury by form derived from Main-Form which locates a range of values (Range-subfrom & Range-Query)
My problem spans both forms and queries (so I am posting in both forums):
1. I want to create an update query that will draw its data from Single-subform (the form which displays the results of singleRecQuery). I have created the qury without a problem but the fields in the form are locked for entering data (maybe because they are bound). Is there any way to enter data in such a form which is based on a query and then use the new data in another query ? (I tried allowing data entery in the forms properties but it deos't work).
2. I have tried to put a criterion in the queries on the "Delete Date" field so that the quries will not display the deleted records (I have tried "is null" "is empty" and "is missing") but when I run the query with these parameters I get no records back.
3. In the form I have a command buton which runs a macro that runs the qury and then update dthe subform. Is there a way to get this button to run different macros after different events in the form or do I have to add a button for every specific task I want.
4. As I have mentioned the Main-fom is supposed to run 3 differnt queries and display the results on the same form. I know how to make a subform invisable but is there a way to place all three result subforms in the same spot ?
Sorry it is so long
Thanks
EJ
I'm wanting to run an update query but first I want to see the results by using a select query to make sure that I'm getting the correct results.
See the following query statement:
SELECT ([Goodrec - All] INNER JOIN WH_ACCTCOMMON ON [Goodrec - All].ACCTNO = WH_ACCTCOMMON.ACCTNBR) INNER JOIN [Trial-GL-Reference] ON WH_ACCTCOMMON.CURRMIACCTTYPCD = [Trial-GL-Reference].LOANTYPE SET [Goodrec - All].GLCODE = [TrialTotals].[glcode], [Goodrec - All].CURRBAL = IIf(Not IsNull([chgoffamt]) And Not IsNull([partsold]),CCur([grossbal])-CCur([chgoffamt])-CCur([partsold]),IIf(Not IsNull([CHGOFFAMT]),CCur([grossbal])-CCur([CHGOFFAMT]),IIf(Not IsNull([partsold]),CCur([grossbal])-CCur([partsold]),[grossbal]))), [Goodrec - All].PCTOWNED = IIf(Not IsNull([origamt]) And Not IsNull([partsold]), CCur([origamt])-CCur([partsold]/CCur([origamt]), IIf(IsNull([partsold]), [grossbal]));
This is the error that I receive each time I attempt to run it and I'm not sure what I'm missing.
Error message:
MICROSOFT OFFICE ACCESS
Syntax error(missing operator) in query expression '([Goorec-ALL] Inner Join WH_ACCTCOMMON ON [Goodrec-All].ACCTNO=WH_ACCTCOMMON.ACCTNBR) inner join [TRIAL-GL-Reference].LOANTYPE SET [Goodrec - All].GLCODE = [TrialTotals].[glcode]'
Any help with this issue would be greatly appreciated.
Thanks.
Govmate!
Dear Access Expert
I have been doing some experimentation with Queries and I have discovered something unusual.
If I have one query and I use the totals feature (only using group by) I get all the records based on the inputed criteria
If I then use that same query as an underlying recordset for a second query and I use the totals feature (only using group by) in the second query... I only get the first record of each type. See query results below..
I am trying to achieve the results of the second query in the first query (DON'T WANT NESTED Queries) and I don't really understand why the results of the queries are different when everything else is the same other than one being nested.
Example below
First Query Results (using totals with group by)
1 a
1 a
1 a
2 a
2 a
2 a
3 a
3 a
3 a
4 a
4 a
5 a
Second Query Results with the First query as its recordset (using Group By)
1 a
2 a
3 a
4 a
5 a
SELECT tblNewTrans.Buyer, Count(tblNewTrans.Buyer) AS ["Total New Leads"], (select count(tblnewtrans.buyer) from tblnewtrans where tblnewtrans.new=true) AS Expr1, (select count(tblnewtrans.buyer) from tblnewtrans where tblnewtrans.refund=true) AS Expr2
FROM tblNewTrans
GROUP BY tblNewTrans.Buyer;
can anyone tell me why statement is working correctley. i have a table with a company field, paid field, refund field.
i need to run a query that gives me an amount to records for each company(that bit works), but also tell me how many payments have been recieve(new field) and how many payments have been refunded. all grouped under the correct company name. please help!!!!
the new and refund fields are checkboxes.
I am trying to combine the below queries into one using nested Select statements, but I am not having any luck. Any examples on how to do this would be appreciated. Thanks
qry1000_006_01-Base4 syntax:
SELECT RIVMTRM0_STDY_GRP_TST_REMARK.IVMSGRP, RIVMTRM0_STDY_GRP_TST_REMARK.IVMTESTSN
FROM RIVMTRM0_STDY_GRP_TST_REMARK
GROUP BY RIVMTRM0_STDY_GRP_TST_REMARK.IVMSGRP, RIVMTRM0_STDY_GRP_TST_REMARK.IVMTESTSN
HAVING (((Count([IVMSGRP])<>Max([IVMRMKSN]))=-1));
SELECT [qry1000_006_01-Base4].IVMSGRP, [qry1000_006_01-Base4].IVMTESTSN, RIVMTRM0
_STDY_GRP_TST_REMARK.IVMRMKSN, RIVMTRM0_STDY_GRP_TST_REMARK.IVMRMK
FROM [qry1000_006_01-Base4] INNER JOIN RIVMTRM0_STDY_GRP_TST_REMARK ON ([qry1000_006_01-Base4].IVMSGRP =
RIVMTRM0_STDY_GRP_TST_REMARK.IVMSGRP) AND ([qry1000_006_01-Base4].IVMTESTSN = RIVMTRM0
_STDY_GRP_TST_REMARK.IVMTESTSN);
I have a table of dates that store all the Sundays of a year, as that is what all of our records are based on (how many items an employee sold on the week ending on such and such a date). The table is called WeekEndDates and the column is called WeekEndDate. I want to automate adding a new week, so I have a command button that has the following VB code:
DoCmd.RunSQL ("INSERT INTO WeekEndDates (WeekEndDate) VALUES (DATEADD('D',7, SELECT Max(WeekEndDate) FROM WeekEndDates)")
Any help would be appreciated, I don't know of another way to do this. I'm not sure if this is a SQL question or a VB question, so sorry if this is in the wrong spot.
Hi people ... here 's want i ve been trying to do for ages...
Subtract the result of this query
SELECT sum(tbl_order.sunoloaxias)
FROM tbl_order, tbl_client
WHERE tbl_client.arithmo = tbl_order.onoma_arithmo and tbl_client.arithmo=220;
from this query
SELECT sum(tbl_cash.amount) AS Eκφρ1
FROM tbl_client, tbl_cash
WHERE (tbl_client.arithmo)=220 And ((tbl_cash.pelatis)=tbl_client.arithmo);
I am trying to put it somehow in a nested query but i can t manage... Please send any answers that can help me
Thanks!!
Hi folks,
I have a query which queries another query. I need to re-write the whole thing in SQL, but struggling with incorporating the nested query.
here's the main query:
SELECT tblProductSubCategory.SubCatDesc AS Products, qrySummaryStage3.[Early Cash Sales], qrySummaryStage3.[Late Cash Sales], qrySummaryStage3.[Cash Variance], qrySummaryStage3.[Cash Variance %], qrySummaryStage3.[Early Credit Sales], qrySummaryStage3.[Late Credit Sales], qrySummaryStage3.[Credit Variance], qrySummaryStage3.[Credit Variance %], qrySummaryStage3.[Early Total], qrySummaryStage3.[Late Total], qrySummaryStage3.[Variance Total], qrySummaryStage3.[Total Variance %], tblBudgetNew.Amount AS [Late Budget Amount], [Late Total]-[Late Budget Amount] AS [Budget Variance], qrySummaryStage3.[Early Cash Margin %], qrySummaryStage3.[Late Cash Margin %], qrySummaryStage3.[Early Credit Margin %], qrySummaryStage3.[Late Credit Margin %]
FROM (qrySummaryStage3 INNER JOIN tblBudgetNew ON qrySummaryStage3.SubCatID = tblBudgetNew.SubCatID) INNER JOIN tblProductSubCategory ON qrySummaryStage3.SubCatID = tblProductSubCategory.SubCatID
WHERE (((Month([date]))=1) AND ((Year([date]))=2005) AND ((tblBudgetNew.Site)=[Enter Site ID]) AND ((tblBudgetNew.Type)="Monthly Breakdown"));
and here's the nested query , called "qrySummaryStage3":
SELECT tblProductSubCategory.SubCatID, tblReportTemp1.[Early Cash Sales], tblReportTemp1.[Late Cash Sales], [Late Cash Sales]-[Early Cash Sales] AS [Cash Variance], IIf(nz([early cash sales],0)=0 Or [Early Cash Sales]=0,0,[Cash Variance]/[Early Cash Sales]) AS [Cash Variance %], tblReportTemp1.[Early Credit Sales], tblReportTemp1.[Late Credit Sales], [Late Credit Sales]-[Early Credit Sales] AS [Credit Variance], IIf(nz([Early Credit Sales],0)=0 Or [early Credit Sales]=0,0,[Credit Variance]/[Early Credit Sales]) AS [Credit Variance %], [Early Cash Sales]+[Early Credit Sales] AS [Early Total], [Late Cash Sales]+[Late Credit Sales] AS [Late Total], [Late Total]-[Early Total] AS [Variance Total], IIf([Early Total]=0,0,[Variance Total]/[Early Total]) AS [Total Variance %], IIf([Early Cash Sales]=0,0,([Early Cash Sales]-[Early Cash Cost])/[Early Cash Sales]) AS [Early Cash Margin %], IIf([Late Cash Sales]=0,0,([Late Cash Sales]-[Late Cash Cost])/[Late Cash Sales]) AS [Late Cash Margin %], IIf([Early Credit Sales]=0,0,([Early Credit Sales]-[Early Credit Cost])/[Early Credit Sales]) AS [Early Credit Margin %], IIf([Late Credit Sales]=0,0,([Late Credit Sales]-[Late Credit Cost])/[Late Credit Sales]) AS [Late Credit Margin %]
FROM tblReportTemp1 RIGHT JOIN tblProductSubCategory ON tblReportTemp1.ProductSubCatId = tblProductSubCategory.SubCatID;
Thanks in advance!
Hi there,
I'm using access 2000 for starters.
I have created one to many relationships for each of 10 cascading tables dependent on related records in each preceeding table and was expecting to be able to drill down into them in the standard database window prior to creating a data access form to work with.
However i have found that tables 1 through 7 are visible, but access doens't give a little "+" in the corner of table 8 to get to tables 9 and 10. i.e, i can't seem can't seem to drill down beyond table 8 to view related records in tables 9 then 10.
Does this mean that there is a limit to how far you can drill down through table relationships within access?
Thanks
Vince