Newly Entered Field Not Found In Control Source List
Oct 23, 2012
I have an access database where I have added a new field, but I cannot find the name of that field in the Control Source list to link it from where the data will be entered. It IS in the table, too. Why in the world is it not working.
A user enters a New Job Opening into the form for New Job Opening. Later, a user enters a New Interview in the New Interview form.... when they enter the job opening number into the job opening number field, it auto-populates the other information previously entered into the New Job Opening form into an area within the New Interview form. I have made sure the new field is in the table for the New Job Openings table.
View Replies
ADVERTISEMENT
Sep 17, 2014
I am relatively new to Access and i am wondering why i cannot find a specific field from a table on the control source when i am and attached it to a check box.
I have created the field on the table, and now i want to attached it to the check box on a form however when i go down the list of control sources i cannot see it.
View 3 Replies
View Related
Oct 6, 2006
Hi All,
I have a form from with a button that exports data in to excel using the following on click code
DoCmd.OutputTo acOutputQuery, "qrySoftPDR2", acFormatXLS, "FOBPDR.xls", True 'open in Excel
The problem is that if I go in to an existing record it works fine.
However if I have just input the record then it comes out blank. I'm guessing there is some sort of record update code I can use, but I've been unable to figure oput what it may be,
Thanks again
View 1 Replies
View Related
Mar 26, 2014
I have a very simple report that is generated from a table. There are no queries associated with this report. When new information is entered into my table I run the report and the new information appears. It has been working correctly for months. Now all of a sudden after the new information has been entered it doesn't show in the report.
View 4 Replies
View Related
Apr 30, 2013
I am looking to (on the mainform) have the user enter into a text box whatever date they would like to enter and have that value become the current date of the system. So that all operations are based off of this newly entered date.
View 4 Replies
View Related
Oct 20, 2014
I have a combobox with a value list as the control source. I have a user who clicks the drop-down, but there are no options. Every other user is able to view these options, and this user has no problem with any other combobox with a value list.
View 3 Replies
View Related
May 28, 2015
I have table that I had to add a new field to which we update with a form. I tried to add a control for the new field but the field does not show up in the list for the control source. I am trying to add a list box to the form with a blank and 5 options.
I have attached screen shots of the table design and the form. The table has the field in datasheet view and I have manually entered a few entries in it but it still will not show in the control source for the form control. The top section of the form is where we enter and select the data for the new records. The bottom section (circled in red) autofills the matching record, from separate tables, for updating with the new entries.
I have added form controls for modified fields in the past so I am confused about why this is happening.
View 2 Replies
View Related
Feb 10, 2006
I need to add a text box to a form, but I need the contents to be a column in one of the tables of another database.
I can do it with a data from a table in the current database, but I can't figure out the syntax to bind to an external database.
I'm assuming it can be done because I can do it in Excel with:
='C:Documents and Settingsc-liam.gartsideMy Documents[OtherDatabase.xls]Sheet1'!A1
Any idea?
TIA, Liam
View 5 Replies
View Related
Jun 16, 2006
I have a textbox with it's field control source set.
Is there any way of having a Sum function that adds up other textboxes and saves them in this field/textbox.
So far i can either set the control source to the field name or have =Sum([size_sqm])
View 2 Replies
View Related
Oct 10, 2012
i have a list box with 6 columns. in column 6 there is a time field. on selecting this list box i want to set the value of a combo box to the time field.
so in the control source i put
[Forms]![frmAppointmentTreatmentItems]![comboTreatmentDuration]
This has no effect. I am not sure if i have done this correctly. but the combo box has manual values in it. the reason i want to have values in it is so if the treatment is 45 minutes at default. But i want to change it to 30 minutes just for a single occasion then i thought that this would be the way to do it.
View 11 Replies
View Related
Feb 25, 2014
I want to create a table of all fields in a form, their datatype and their controlsource.
I have done the first 2 parts easily enough using the forms.formname.controls.name property
and
TypeName(forms.formname.controls)
But I am unable to pragmatically read the controlSource.
EG
forms.formname.controls.txtname.controlsource works
but when In a for loop
I cannot use the name of the control to return the control source.
Code:
Sub PopTab
Set frm = forms.FrmCases
for each CTl in frm.controls
MyName = ctl.name
MyType = TypeName(ctl)
MySource = ctl.name.controlsource
end if
next ctl
end sub
View 3 Replies
View Related
Jun 13, 2013
I am trying to create a form with multiple combo boxes where users can select fields from my main database and click a button to generate a report based on their selections. I think I am supposed to create a generic report with perhaps 4 fields where I would link the four combo boxes to. The issue is I cant seem to get the selection of the combo box to change the field that the report should pull from the database. I think I am supposed to use dlookup in the reports control source for each field, but I cant seem to get it to work.
View 14 Replies
View Related
Feb 13, 2006
Hi all, i have a 2 fields in a subform named "HRS_ABSENT" & "ABSENCE_REASON" i'm trying to create some code that will display a message if the user inputs any number into the "HRS_ABSENT" field & leaves the "ABSENCE_REASON" field empty. I want to force the user to select a ABSENCE RESON (these are 3 letter codes) from the drop down list, if they enter a number in the HRS ABSENT field. Ive tried the below code but it doesnt do anything :-(
Anybody please help me out?
-------------------------------------------------------------------------
Private Sub Form_BeforeUpdate(Cancel As Integer)
If HRS_ABSENT = >0 & ABSENCE_REASON = FALSE Then
MsgBox "Please select an Absence reason"
Cancel = True
End If
View 2 Replies
View Related
May 8, 2014
I am new to access, after learning basics I am trying to build my first DB.
Having some troubles with the IIF syntax. I am placing the formula
=IIf([Total]<=(200),[Total]*(0.7)) & IIf([Total]>(201)&[Total]<=(500),[Total]-(200)*(1)+(140)) & IIf([Total]>(501),[Total]-(500)*(1.2)+(300)+(140))
In the form data control source of a field. The first 2 statement seems to work, but the last statement results in some crazzy figures.
View 3 Replies
View Related
Mar 31, 2015
i recieved error on the following connection string in the combo box change event code as follows,
Private Sub LotNo_Change()
Dim conn As New ADODB.Connection
Dim sConnString As String
[Code]....
View 6 Replies
View Related
Oct 30, 2014
I am in the process of creating a training database that includes levels of proficiency with certain tasks for employees.
In one of my reports I would like to appropriately display with tasks the employee "Cannot Perform";"Can Perform with Assistance";"Can Perform Alone";"Trainer" (straight from the field list of the task). But I can't seem to get the hierarchy correct. Tried it in a PivotTable too as I thought similar to PTs in Excel you could get some kind of "count" of values. Couldn't make that happen either.
Each employee has a proficiency rating on about 20 different tasks. Proficiency input is controlled by a field list. I would like to structure this part of the report like so:
------------------------------------------------------------
EMPLOYEE PROFICIENCIES
--Cannot Perform Task
----Cutting
----Trimming
----Grinding
--Can Perform With Assistance
----Painting
----Fixing
----Drilling
etc. etc. So in this case the Field itself would become the value being grouped. I know there has to be some logic either in a query or SQL.
View 2 Replies
View Related
Sep 19, 2005
I have an unbound form with three tabs. On each tab there is a sub form. Each tab is a search form and each sub is a results returned. I have made everything unbound and set the sub form recordsource and its controls control souce on afterupdate of the main form search criteria. Works fine except for after some use the db decides the sub forms are not unbound and sets the record source and control sources.
I'm trying to do a
Me.PollingPlacesResults.Form.RecordSource = ""
Me!PollingPlacesResults!PollID.ControlSource = ""
but this does not seem to work in actualy removeing the record source and control source.
View 14 Replies
View Related
Feb 16, 2013
I am using MS Access 2007.
I have created a multi-valued field "Product Category" that lookups data items from a linked table. So, the Data Type for the multi-valued field "Product Category" is Number.
Now I want to change the Data Type of "Product Category" from Number to Text, and make a value list that I can type values in and can provide the same data items as the linked table.
How to change item source for the multi-valued field from a linked table to a list that I can type in values? Is there a feature provided by MS Access 2007 can enable such a conversion?
View 2 Replies
View Related
Feb 16, 2013
I am using MS Access 2007.
I have created a multi-valued field "Product Category" that lookups data items from a linked table. So, the Data Type for the multi-valued field "Product Category" is Number.
Now I want to change the Data Type of "Product Category" from Number to Text, and make a value list that I can type values in and can provide the same data items as the linked table.
How to change item source for the multi-valued field from a linked table to a list that I can type in values?
Is there a feature provided by MS Access 2007 can enable such a conversion?
View 8 Replies
View Related
Aug 26, 2005
I have a form where users enter data in various ways - combo boxes with drop down selections and text boxes where users manually enter some data. I also have several text boxes that return "answers" based on calculations from user entries mentioned above. The form is bound to a table where all the entered data is stored. I'm having trouble saving the calculated information to the bound table. It's easy in all the non-calced boxes, I just put the column name of the bound table in the control source, but in the calculated fields, I already have the formula in the control source. How can I identify the proper column to save the data in this case.
Thanks!
View 5 Replies
View Related
Sep 24, 2013
I added a new field to one of my tables and query, but when I try to add a control for that field into my form it is not recognising it and the field isn't appearing in the sources for the form, even though the table is sourced to the form? Or am I going to have to do the usual and redo the entire form because I made a minor adjustment?
View 1 Replies
View Related
May 28, 2013
I have created a table for installer invoicing, and have a field for invoice amount. I have created a user input form that allows a user to fill in certain pay rates for different aspects of installation, and would like to know how to make the invoice amount a calculated control that will auto update the field InvoiceAmt in my table. I can't figure out how to do this in the property sheet.
View 3 Replies
View Related
Nov 5, 2013
I want a List Box on a Form that takes its available drop-down values from tblDiscipline and puts the value selected into the Discipline Field of tblEquipment.
The problem is I set the Control Source of the List Box to tblDiscipline (so the List Box can use these values for the drop-down selections) and when I make a selection it tries to put it back into tblDiscipline instead of tblEquipment, because I can't find anywhere to set the table that the result should be Bound to.
How can I set up a control, such as a List Box, so that it gets its values from one table but returns them to another?
View 1 Replies
View Related
Sep 30, 2013
I'm new to Access VBA and I am having a bit of trouble. I want to find the dates between 2 dates(both inputted into textboxes), when I press a button I want them dates found to be displayed in a listbox.
View 5 Replies
View Related
Aug 3, 2015
I have a form that the user enters employees daily duties. I have code to run sql after the BoxNum field has data in it. I want it to look at the BoxNum field and the dropdown box for the task to see if the entered box number has already been completed for the task selected on the form. Here is what my code looks like now. The code runs but gives me the msgbox no matter if it is a made up box number and I also get a syntax error 3075.
Code:
Private Sub Text13_BeforeUpdate(Cancel As Integer)
Dim rs As DAO.Recordset
Dim strSQL As String
[code]....
View 6 Replies
View Related
Jul 27, 2005
Hi all, at the moment all of my field are control sourced. I heard there is a way whereby the field could be unbound and one button it the control source for them all. Im not entirely sure what this means or how to go about it. But i think it would solve the problem of if my users start entering data into a record and then decide to leave it, this record is automatically added to the table, with little or no data. As the data in the table is used for statistics, the table showing records which are not actually there is causing problems. Im not sure if i explained this well, but i would be grateful of any help. Thanx
View 1 Replies
View Related
