No Value Given For One Or More Required Parameters

After researching this issue I have not found a satisfactory solution to this issue.

I currently have 1 Access query that is the basis for my VBA code_ Sql statement. both Query statements work when debugged. However, I am getting this error on execution of the sql statement in my vba.

Dies here: '<<<<<<<<<<<<<<<<

Public Sub ConnectCMIS(spar As String)

Dim sConn As String
Dim oConn As ADODB.Connection
Dim lCnt As Long
Dim sSql, strSQL As String
Dim rstOra As ADODB.Recordset
Dim rsAccess As New ADODB.Recordset
Dim fld As ADODB.Field

On Error GoTo ErrorHandler

DoCmd.SetWarnings False
sConn = _
"Driver={Microsoft ODBC for Oracle};Server=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS =(PROTOCOL=TCP)" _
& _.;......

strSQL = "SELECT " & _
"MEASNO, FTEMNOMENCLATURE, NOMENCLATUREMODEL, " & _
"EquipID As EQUIPMENT_ID, MULTIPLE_ID, JOB_GROUP, " & _
"PROJECT, PRIORITY, IIf(Len(Trim(COMPLETE_BY_DATE)) > 0, Mid(COMPLETE_BY_DATE, 3, 2) & ""/"" & Mid(COMPLETE_BY_DATE, 5, 2) & ""/"" & Mid(COMPLETE_BY_DATE, 1, 2), Null) AS COMPLETEBYDATE, " & _
"RequestorId As REQUESTOR_ID, " & _
"CALIBRATION, REPAIR, MODIFICATION, ACCEPTANCE, EVALUATION, " & _
"MAINTENANCE, SUPPORT, CMIS_LAB, SERVICE_LAB, WORK_CODE, " & _
"CHARGE_NUMBER, DISPOSITION, ReqComments as REQUESTORCOMMENTS, INPUT_RANGE_MIN, " & _
"INPUT_RANGE_MAX, INPUT_UNITS, OUTPUT_RANGE_MIN, OUTPUT_RANGE_MAX, " & _
"OUTPUT_UNITS, GAIN, CUTOFF_FREQ, INPUT_FREQ, REF_FREQ, REF_VOLTAGE, " & _
"EXCIT_VOLTAGE, EXCIT_ENABLED, FTIR_ACCURACY, OFFSET, OFFSET_ENABLED, " & _
"REQ_EMO1, REQ_EMO2, REQ_EMO3, REQ_EMO4, REQ_EMO5, REQ_EMO6, " & _
"SPARECODE, CALIBRATION_ID " & _
"FROM QS_SRUpdatetoCMISdrt " & _
"WHERE job_group = " & Chr(39) & spar & Chr(39) & ""
Set rsAccess.ActiveConnection = CurrentProject.Connection
rsAccess.CursorType = adOpenStatic
Debug.Print strSQL
rsAccess.Open strSQL'<<<<<<<<<<<<<<<<
If rsAccess.EOF = False Then

Set oConn = New ADODB.Connection
oConn.Open sConn

Set rstOra = New ADODB.Recordset

rstOra.ActiveConnection = oConn
rstOra.CursorType = adOpenKeyset
rstOra.LockType = adLockOptimistic
rstOra.CursorLocation = adUseServer 'default
rstOra.Open "CMIS.UDV_RFS_SR"

Do While rsAccess.EOF = False
rstOra.AddNew 'Then where you add the Oracle record instead of individual assignments you have
On Error Resume Next
For Each fld In rsAccess.Fields
rstOra(fld.Name).Value = fld.Value
Next
rstOra.Update
rsAccess.MoveNext
Loop
End If

strSQL = "UPDATE CMIS.UDV_RFS_SR SET PROCESSED_IND = 'S' WHERE job_group = '" & spar & "'"
oConn.Execute strSQL, lCnt

DoCmd.RunSQL _
("UPDATE TA_SR SET PROCESSED_IND = 'S' WHERE Job_Group='" & spar & "'")

rstOra.Close
Set rstOra = Nothing
oConn.Close
Set oConn = Nothing
Call MsgBox("Submittal to CMIS has been processed.", vbInformation, "Process Submittal Complete")

SubExit:
On Error Resume Next
If Not oConn Is Nothing Then
Set oConn = Nothing
End If
rsAccess.Close
Set rsAccess = Nothing
Exit Sub

ErrorHandler:
MsgBox "Error Number = " & Err.Number & "-> " & Err.Description, vbExclamation, "CMISStatus"
Resume SubExit

End Sub

1st query:"QS_SRUpdatetoCMISdrt"

SELECT QS_TT_GeneralInfo.BEMS AS RequestorId, TA_SR.FTEMNomenclature, TA_SR.NomenclatureModel, tblEquipListingPerJobGroup.MeasNo, IIf([Primary]=True,[Equipment_ID],Null) AS EquipID, IIf([Additional]=True,[Equipment_ID],Null) AS Multiple_ID, TA_SR.Job_Group, TA_SR.Project, TA_SR.Priority, TA_SR.Complete_By_Date, TA_SR.Calibration, TA_SR.Repair, TA_SR.Modification, TA_SR.Acceptance, TA_SR.Evaluation, TA_SR.Maintenance, TA_SR.Support, TA_SR.Cmis_Lab, TA_SR.Service_Lab, TA_SR.Work_Code, TA_SR.Charge_Number, TA_SR.Disposition, TA_SR.Input_Range_Min, TA_SR.Input_Range_Max, TA_SR.Input_Units, TA_SR.Output_Range_Min, TA_SR.Output_Range_Max, TA_SR.Output_Units, TA_SR.Gain, TA_SR.Cutoff_Freq, TA_SR.Input_Freq, TA_SR.Ref_Freq, TA_SR.Ref_Voltage, TA_SR.Excit_Voltage, TA_SR.Excit_Enabled, TA_SR.FTIR_Accuracy, TA_SR.Offset, TA_SR.Offset_Enabled, TA_SR.REQ_EMO1, TA_SR.REQ_EMO2, TA_SR.REQ_EMO3, TA_SR.REQ_EMO4, TA_SR.REQ_EMO5, TA_SR.REQ_EMO6, TA_SR.SpareCode, TA_SR.CALIBRATION_ID, First(TA_SR.RequestorComments) AS ReqComments, "S" AS PROCESSED_IND, Now() AS LAST_UPDATE_DATE
FROM (TA_SR LEFT JOIN tblEquipListingPerJobGroup ON TA_SR.Job_Group = tblEquipListingPerJobGroup.Job_Group) LEFT JOIN QS_TT_GeneralInfo ON TA_SR.Requestor_ID = QS_TT_GeneralInfo.RequestorId
WHERE (((TA_SR.Job_Group)=[Forms]![FE_SRForm]![JobGroup]) AND ((TA_SR.SubmittedSR)=0))
GROUP BY QS_TT_GeneralInfo.BEMS, TA_SR.FTEMNomenclature, TA_SR.NomenclatureModel, tblEquipListingPerJobGroup.MeasNo, IIf([Primary]=True,[Equipment_ID],Null), IIf([Additional]=True,[Equipment_ID],Null), TA_SR.Job_Group, TA_SR.Project, TA_SR.Priority, TA_SR.Complete_By_Date, TA_SR.Calibration, TA_SR.Repair, TA_SR.Modification, TA_SR.Acceptance, TA_SR.Evaluation, TA_SR.Maintenance, TA_SR.Support, TA_SR.Cmis_Lab, TA_SR.Service_Lab, TA_SR.Work_Code, TA_SR.Charge_Number, TA_SR.Disposition, TA_SR.Input_Range_Min, TA_SR.Input_Range_Max, TA_SR.Input_Units, TA_SR.Output_Range_Min, TA_SR.Output_Range_Max, TA_SR.Output_Units, TA_SR.Gain, TA_SR.Cutoff_Freq, TA_SR.Input_Freq, TA_SR.Ref_Freq, TA_SR.Ref_Voltage, TA_SR.Excit_Voltage, TA_SR.Excit_Enabled, TA_SR.FTIR_Accuracy, TA_SR.Offset, TA_SR.Offset_Enabled, TA_SR.REQ_EMO1, TA_SR.REQ_EMO2, TA_SR.REQ_EMO3, TA_SR.REQ_EMO4, TA_SR.REQ_EMO5, TA_SR.REQ_EMO6, TA_SR.SpareCode, TA_SR.CALIBRATION_ID, "S", Now();