Not Picking Up Table Value
Dec 10, 2007
Hi everybody,
I have the following table:
ID ThicknessFieldRange1 ThicknessFieldRange2 Factor
16 0.0641 0.068 0.97
17 0.0681 0.072 0.98
18 0.0721 0.076 0.99
Now, I have a form that has a 'Thicknesstxtfield' that when calculated in the form its value is 0.072 in this case . Based on the range this value falls into, I want to get the correspondant 'Factor' which in this case would be '0.98'.
Guess what, ACCESS is telling me that it cannot find the value '0.072' in the table and gives me an error. Any ideas on this?
Notice that all the fields except "ID" are 'Doubles' with 4 decimal places, and I find the values using the 'DLookUp' function. I know that's where the error is because all the other ranges work fine.
Thanks everyone
View Replies
ADVERTISEMENT
Mar 15, 2007
Hi
I'm a bit new to SQL, and have what is probably a rather simple question:
I have a query, which i want to pick up a figure from a table.
SELECT *
FROM Feb_Closed
WHERE Time_to_Close>'6' AND Team_Owner='Comp& Ben';
This give me a load of rows with Time to close between 6 and 9 but nothing else. The problem it is not counting everything over 9 ie i think that it is just looking at 1 digit in the table and so ignoring 10, 11, 12, 13... etc etc.
Any help gratefully received.
Thanks
View 3 Replies
View Related
Jun 10, 2013
I have a table of rates based on ages and I am doing a query that will calculate your rate based on your age. I am using the IIf statement like this:
EERate:IIF([EEAge]>25,.345,IIF([EEAGE]>30,.425,.3)
The query will only use the first rate even if age is above 30.
View 3 Replies
View Related
Oct 31, 2006
Hi everyone,
I'm sort of new to Access, but over the past few months I've been able to develop an inventory database for my work which turned out quite nicely and does everything I need it to, except for one thing.
I want to also create invoices for my customers, and after looking at examples I understand that most people link the "order" with the invoice, so that there is one invoice per order. However, I need the ability to combine many orders into one invoice. That's where I'm stuck.
I don't know how to arrange my relationships and forms so that I can "pick" the orders I want on my invoice, and not at the time of the Order, but at some point after. Basically my orders will be established, but their allocation to invoices won't, until I come along and put them into their rightful bill.
Does anyone have any thoughts on this? I'm pretty stumped.
Thanks a lot for your help.
View 2 Replies
View Related
Mar 21, 2006
I have a table with ID1, ID2, and AMT.
IF ID2 is NULL, I want to update it with the non-null ID2 where the ID1 matches and has the largest sum of AMT.
For instance
ID1 ID2 SUM(AMT)
1 333 1000
1 444 3000
1 <null> 5000
In this case, the third ID2 would get the value of 444 since it had the highest amt.
I'm guessing this involves sub-queries, and I have a real blind spot where they are concerned.
Thanks,
David
View 3 Replies
View Related
Jul 3, 2006
I have two tables in the first table there is an outline number and the second table there is a task id (both are text strings, i.e. outline number and task id would be something like 8.15.3.1)
I want a query to return all the results in the first table that are not equal to the second table
I have tried the following but it returns all 54 records
Code:SELECT DISTINCT RawData.TeamLeadNumber, RawData.Category, RawData.OutlineNumber, RawData.OutlineDescription, RawData.Start, RawData.Finish, RawData.Milestone, RawData.PercentComplete, RawData.DeliverableDesc, RawData.ReleasePeriod, RawData.OutlineNumber2, RawData.OutlineDescription2FROM RawData, SharePointDataWHERE (((RawData.OutlineNumber)<>SharePointData.TaskID));
I have tried changing the where clause to have it as
Code:WHERE ((RawData.OutlineNumber)<SharePointData.TaskID) AND ((RawData.OutlineNumber)>SharePointData.TaskID);
but then no data is returned, and I know that of the 54 records 21 of them are the same so I should be seeing 33 records
View 1 Replies
View Related
Sep 9, 2005
Hello,
Can anybody see what I'm doing wrong here. I have the following query
SELECT Contacts.Cust_FK, Contacts.ContactNr, Contacts.FirstLastName
FROM Contacts
WHERE (Forms.ComLogDetail.Cust_FK=Contacts.Cust_FK)
ORDER BY Contacts.ContactNr;
The "Forms.ComLogDetail.Cust_FK" part should render the current record in the form ComLogDetail but its not. Any ideas?? I'm an amateur programmer so my apolgies if the solution is all too simple.
View 3 Replies
View Related
Jul 31, 2007
hi,
I am trying to pick out the ERAP no.s out of a whole string of data. ERAP no.s are like invoice no.s. Do I Append or Make table? How do i go about doing this? I want the ERAP no. in a row next to the the description field all next to its respective string of data too....
for an example..
1)ERAP43463 STAFF TEAM LUNCH MID-YEAR REVIEW
2) 0507 SUBMITTED ITEMIZED ACCR-ERAP43159
See.. the part where the ERAP no. appears is inconsistant.. if not i could simply use excel and use text to columns. We have thousands of lines like this every week... There has to be a way to pick out just this detail and fill in the column next to the respective datastring...
Can someone please advice me on how i can go about doing this?
View 2 Replies
View Related
Dec 6, 2013
I have a table called "Cities" which has only two fields; City & Province.I have connected it in a relationship with another table as "Include ALL records from 'Cities' and only those records from 'tblInstallations' where the joined fields are equal."I have put an "AfterUpdate" event which works and everything.
It is working fine and updates the province correctly.The problem is that is putting another city from same province in the "City" field even though I picked up different name.
View 6 Replies
View Related
Jan 18, 2006
I'm trying to get a file picking window to open in order to fill a form in access with the files path...and honestly...I have no idea how!
Any advice?
Thanks!
PS: I work on Office XP
View 1 Replies
View Related
Sep 9, 2013
I'm fairly new to databases and have been attempting to build a multi-table database. It's not properly rationalised, but I wanted to test run it to ensure it was fit for purpose first.I've built my form, which is pushing data out to several tables, but I cannot seem to get the form to pick up previous records.
View 3 Replies
View Related
Sep 11, 2013
I have cleared the data out of the database and started testing it to check its usability.I entered in a full record, and flicked back and forth between the records, and everything was looking good.
Then I closed the form, and re-opened it and my record was no longer populating the form fields.I've literally changed nothing bar one field that was changed from number to text.
View 5 Replies
View Related
Apr 21, 2013
I created a database. exported some Excel data into Access tables, created a number of lookups, default values etc. and created a pretty simple query.
My problem is that after importing and tweaking the data, when I add new records, my queries do not pick them up!
I have tried:
1. saving, closing, opening and re-running the queries.
2. putting an Nz expression for each field in the query as I read that null values may cause a problem.
3. wrote the query again, field by field to see if all records were received.
4. Exported the table back to Excel and imported to a new Access table in my database
None of this works.
View 7 Replies
View Related
Feb 7, 2014
I want to have a report card where I can have attendance embedded in for each students and also the highest score for each class each session.
View 4 Replies
View Related
Mar 22, 2013
I have converted an old Access 97 database to Access 2010. Mostly it works fine but I have a major issue with the invoicing forms. It was working in the old database but I cannot get it to work in this version.
I have the usual invoicing option where the lines of the invoice are displayed in a sub form for that customer and line totals calculated. This works fine. I have a sub form total text box in the footer of the sub form which I want to pick up from the main form so that I can add the delivery charge and VAT.
View 6 Replies
View Related
Jun 14, 2005
I am not a professional programer but would like to do a simple database for my group to track research progress. Is that possible to "pick up a date from drop down calendar" then the date will input to the cell (save in table) in a form, instead of typing it in? I saw that in lots of web sites, but can not figure it out how to do it in Access. Tried "Canendar Contol" and "LANDesk Data control" in the toolbox.
Thank in advance
PK
View 4 Replies
View Related
Sep 29, 2013
How can I update (some columns) in a table from the same table based on a Criteria column in the same table.
View 2 Replies
View Related
Jun 28, 2013
I need to get x and y coordinates for each device, but the data has to get looked up from 2 other tables.
I have a table (called InstReclosers) that has device names. Each device is on a Section. I can go to another table (called InstSections) and look up what Node that particular section is tied to. Then I need to go to another table (called Nodes) to get the X and Y location for that particular node.
How I can go about getting this X and Y data into the InstReclosers table?
...in summary, InstReclosers has device name and section name. InstSections has section name and node name. Nodes has node name and XY coords. Need XY coords for each device in InstReclosers.
View 3 Replies
View Related
Jan 29, 2015
When I try to transfer (ctrl c + v) data from a table in Excel to a table in Access it loses format.
Exemple: $ 1.000,00 (Excel) become 1000 (Access).
I need to keep the format to make sure that the code works properly.
View 9 Replies
View Related
Nov 4, 2014
I have a make-table query that pulls all the fields from 1 table (MainTable), and creates a new table with a date stamp based apon a form value entered (New Table = MainTableWithDate).
Currently, I setup the query to pull info from the form field like this:
DateField: [Forms]![frmmain]![DateField]
However, when the make-table query is done - all date fields are blank (all other fields are correctly created), and when I look at the new created table (mainTableWIthDate), the typeassigned to the date field is "Binary" (in the form, I've specified LongDate).
View 6 Replies
View Related
Aug 5, 2014
I have a table products with a field "id_product" and "total" (Total items in stock)
I have a query with the fields "id_product" and also the field "total in stock"
I want an update query to update the field 'total' in table 'products' with infos from that query
For each id-product in table products, replace the field total with the field 'total in stock' from the query
So I want to update a filed in a specific table with infos form another table.
View 2 Replies
View Related
Apr 19, 2013
Here's a query that the bottom listview in the attached form i.e. a listview representing a table of calls(many) to fims (1 top listview)
Code:
SELECT calls.id, calls.firm_id, calls.called, calls.said, calls.spoke_to, calls.next
FROM calls
WHERE (((calls.firm_id)=[firms].[id]))
ORDER BY calls.called DESC , calls.next DESC;
When I run the thing...I get a dialog asking me for firm id.
I want to change this so when I move up and down the firms LV (top)... the bottom LV updates taking firm id from the top LV with focus.
Access 2003.
View 2 Replies
View Related
Jan 13, 2014
I have an MS Access accdb with linked SQL Server 2012 ODBC tables. I am working on a procedure to copy data from local tables to these linked tables (identical schema). I did a simple
Code:
DoCmd.RunSQL "INSERT INTO linkedTable SELECT * FROM localTable"
This works, but is very slow. Way too slow. (INSERT copies the data one record at a time).
I would like to copy the data in a bulk operation, or operations that I can execute programmatically.
View 1 Replies
View Related
May 28, 2015
I have a table for a multiple parents linked to a child table. I need to figure out a way to only allow 1 parent to be coded as primary, 1 as secondary, and then the rest as other... I thought about making Primary/Secondary/Other a primary key. But then I can only have 1 other. I would have to make a finite number of parents that could be entered and I want an infinite number.... My end goal is to have a report that only has a primary and second parent on it, but the rest of the parents still exist in the table...
*Child_ID
Parent_First_Name
*Primary/Secondary/Other
View 8 Replies
View Related
Sep 12, 2014
How to make a form open with data from a table based on a date and time in the/a table?
View 7 Replies
View Related
Aug 29, 2006
Hi,
I am extracting data from linked db2 table using access make table query. First I create a select query and can view the linked db2 data, but when I change to a make table query I get an error message, "invalid argument", when I run the make table query. There is no selection critera specified. Has anyone had this happen? and Do you know a solution?
Thanks for your support
GinnyP
View 1 Replies
View Related