I have a textbox which I need to refresh when my Query is refreshed. Currently I only have the ability to requery with a Button but when that button is pushed I also want a text box to be refreshed. This is what I have currently in my On Click property of the requery button:
=[SearchSubformNew].[Requery]
Is it possible to have 2 On Click events? If so I just wanted to add the line to refresh my textbox which is named SummaryText.
I have some code for a button on click event to open a form and select the record which corresponds to a value in an unbound text box. The code is:
Private Sub Command25_Click()
On Error GoTo Err_Command25_Click
Dim stDocName As String
Dim stLinkCriteria As String
stDocName = "frmOpenPatientRecord"
[Code] ....
This works fine when I put in a 10 digit NHS number but opens a blank record when I enter a four digit or six character/digit PatientNumber. Both patient number and NHS number are text fields in the underlying table.
I have a refresh button next to a box in my form. I would like to make it so that when someone clicks another field or out of the key box it will refresh the form automatically because that box makes other fields autopopulate and the way I have it set up thus far is that you half to refresh the form somehow to get that date to come over.
How do you like that run on!?!?! :p
Thanks for any help!
Here is the scenario:
Form 1 - Data entry for a new project
Form 2 - Data entry for a task associated with the project in the Form 1
Button on form 1 that opens Form 2.
What I am trying to do:
Use a combobox on Form Two to choose the Project entered into Form 1, so I can capture the Form1 PK as a FK on Form 2.
Here is the problem:
Refreshing the record on the button click so that the new option entered into Form 1 shows up in the combo box on Form 2.
Full disclosure:
I'm not much good at VBA so I have been trying to do this by customizing the button macro. I have tried Refresh, and Requery, but I can't seem to get it to update the list in the combo box.
2 questions:
1. How can I get this accomplished?
2. Is there a better way to get this data into the table than what I am trying to do?
Code:
ExportWindow = FindWindow(vbNullString, "Output To")
OkButtonTest = FindWindowEx(ExportWindow, ByVal 0&, "DUIViewWndClassName", vbNullString)
ButtonOKTest = FindWindowEx(ExportWindow, ByVal 0&, "Button", "OK")
mouse_event MOUSEEVENTF_LEFTDOWN, 0, 0, 0, 0
mouse_event MOUSEEVENTF_LEFTUP, 0, 0, 0, 0
The above code works and my issue is how can I move the mouse to the OK button and click on it to. The reason why is when I SETTEXT to the address bar it does not refresh so I SETTEXT to the file name box to navigate to the prescribe address which will refresh the navigation bar once the OK button is clicked. How to refreshing the navigation bar.
I would like to know how to refresh a form on closing event. The forms name is frmDeparturesPaymentScreen. I want to do this in a macro...
View 2 Replies View RelatedI have a Main form with a combo box that pulls names from a table. Alongside the combo box is a command button that opens a form which allows the user to edit the names in the table.
The problem: When a user edits a name and closes the edit form, the edit is not immediately displayed in the combo box. However, when the Main form is closed and reopened, the edit is properly displayed. Can I somehow refresh the combo box in the On Close event of the edit form?
I'm working with a database with employess info in access, When I click on an employees name in a form, I want to fire off another form with there info, what I have now it does nothing.
View 4 Replies View RelatedI have a list box control on a form and i'd like to set up a right-click property. Can this be done at all? When I open the Events tab on the property window..there is no right-click property :confused:
Thanks!
Hello,
How can you disabled a click event on a text box ? I don't want to use ENABLE = false because the background of the texte box comes gray. So, any alternative solution?
Thanks,
Le
I'm trying to code an event that would occur when a user double-clicks on the Record Selector of a subform. I want it to then open a form that would provide additional details about the record selected in the subform. I can't find documentation to tell me (1) where to put the code, i.e. subform double-click event vs. subform detail double-click event, etc.; (2) how to reference the record id of the selected record for use in the filter for the form that is going to be opened (the underlying query contains the ID for the record). Can anyone help or point me to documentation?
View 2 Replies View RelatedHi,
I have a form which has a tab control on it. The form itself is based on 1 table (tblCustomers). The tab control has 2 pages.
Page 1 shows 6 fields from tblCustomers.
Page 2 of the tab control shows 2 embdedded forms. Those forms are based on queries created from tblCustomers. one shows records with a date entered into one of the fields, the other shows records that have no dates.
What I want to be able to do is when I see a company name in one of the ebedded forms (Page 2), I want to be able to double click that record and it switches me back to Page 1 and shows the the related details of whichever company I double clicked.
I have changed the double click event in the emdedded form and using the builder to create something. I also added a setfocus command as I read about that somewhere (but i have no idea what it does). Through this I managed to get it to switch from Page 2 to Page 1 when I double click, but it only ever takes me to record 1 regardless of which company i double clicked.
i may have this deisgned totally wrong so please feel free to point me in the right direction.
any ideas?
thanks in advance
I'm calling a Public Click event on a Form, from a Delete Record button on another form. Debugging shows that the code executes correctly line for line... but the 'Event' doesn't function as it should. The main feature I need to to iterate over the controls on the second form to disable them, to prevent users from typing in, causing relationship error. Why is this?! Even after the execution of the code... I can click on the refresh button myself, which will disable the control, but not if I call the event from the code.
Here is my code...
Code: Private Sub DelGroup_Click()On Error GoTo Err_DelGroup_ClickDoCmd.SetWarnings FalseDim msgString As StringmsgString = "You are about to delete a Lessee/Group." & Chr(13) & "This will also remove all related records in the..." _& Chr(13) & Chr(13) & Chr(45) & " Reviews Tab" & Chr(13) & Chr(45) & " Facility Details Tab" & Chr(13) & Chr(45) _& " Chronology Tab" & Chr(13) & Chr(45) & " Asset and Insurance Tabs." _& Chr(13) & Chr(13) & "Are You Sure?"If MsgBox(msgString, vbInformation + 4, "Confirm Delete") = vbYes Then DoCmd.DoMenuItem acFormBar, acEditMenu, 8, , acMenuVer70DoCmd.DoMenuItem acFormBar, acEditMenu, 6, , acMenuVer70Dim frm As Form_ReviewsSet frm = Forms!Reviewsfrm.SelectLessee.Requeryfrm.SelectLessee.Value = ""frm.SelectAsset.Requeryfrm.SelectAsset.Value = ""DoCmd.SelectObject acForm, "Reviews", False 'Don't even think i need this line, but put it in for good measure. Tried withoutfrm.Refresh_Click 'It now jumps to the Refresh Click Event and runs as expected...ElseExit SubEnd IfDoCmd.SetWarnings TrueExit_DelGroup_Click:Exit Sub Err_DelGroup_Click:MsgBox Err.DescriptionResume Exit_DelGroup_ClickEnd Sub
This is driving me mad
Please see attached database
Main form is frmPatients
If you click on the main form called frmpatient you will see 2
text boxs one called Primary Insurance the other Called Secondary Insurance
Above those text boxes are to hyper links which open the list box
What I'm trying to do is if a user double clicks the name of the Insurance
From the List Box it will insert that Name of the Insurance Into either
The Primary Insurance or Secondary Insurance Text Fields
I do not Want to Use combo Boxes because I have about 1,000 Insurances in my database.
Please Help
I have a form with a combo box that is populated by (1) a union query, and (2) a make table query from that union query. The reason I have both is because I want to have an autonumber and I can't do that directly in the first query.
So any time I update any of the tables that are in the union query, then go back to the form, i want the the combo box to update the list which means I have to run (1) and then (2) to repopulate the combo box with the updates.
HI all
I have managed to populate a treeview with some menu items I required and it looks great but I now need to get it to do something. How do I get a tree view value (selection) to act as a variable in routine. e.g. if my tree look like this.
Menu
¦
- Compaint management
I
I----My compaints
When I "double click" on My Complaints I want it to a open a specific form. One I know how to do one action I should be able to figure the rest out for myself.
Thanks everyone. :-)
I have a continuous form, with data entry fields in both the form header and the detail section.
I've attached an "On Exit" event to the ProdQty field in the detail section. The prime function of the event code is to run an update query on the table (which is the data source for the form).
The code executes properly (update query runs successfully and form refreshes) when I Tab out of that field. It also executes properly when I use the mouse to click on another field in the detail section.
However, when I use the mouse to click on a field in the form header or form footer sections, the On Exit code does not execute properly.
Here's the On Exit Sub:
Private Sub ProdQty_Exit(Cancel As Integer)
On Error GoTo ProdQty_Error
If (Int(Me!ProdQty) <> Me!ProdQty) Or ((Me!ProdQty / Me!LDU) < 1) Or (Int(Me!ProdQty / Me!LDU) <> (Me!ProdQty / Me!LDU)) Then
Me.ProdQty.BackColor = 255
Me.ProdQty.ForeColor = 16777215
Beep
MsgBox "The quantity you entered is invalid for this product." & vbCrLf & vbCrLf & "Please check the LDU (least divisible unit) and enter a new quantity.", vbExclamation, "Quantity Error"
DoCmd.GoToRecord acActiveDataObject, "Order Form", acPrevious
DoCmd.GoToRecord acActiveDataObject, "Order Form", acNext
DoCmd.GoToControl "ProdQty"
Exit Sub
Else
Me.ProdQty.BackColor = 255
Me.ProdQty.BackColor = 16777215
Me.ProdQty.ForeColor = 0
DoCmd.SetWarnings False
DoCmd.OpenQuery "Update Product Qty in Current Order", acViewNormal, acEdit
Me.Requery
Me.Refresh
Me.Repaint
DoCmd.GoToControl "ProductCombo"
End If
ProdQty_Error:
Exit Sub
End Sub
Here's the Update Query:
UPDATE [Current Order] INNER JOIN Products ON [Current Order].[Product #] = Products.[Product #] SET [Current Order].Quantity = Forms![Order Form]!ProdQty, [Current Order].Price = IIf([Forms]![Order Form]![PriceCodeCombo]="CS",[Products]![Contract Net]*([Forms]![Order Form]![ProdQty]/[Forms]![Order Form]![ProdLDU1]),IIf([Forms]![Order Form]![PriceCodeCombo]="EDW",[Products]![Ed Wholesale]*([Forms]![Order Form]![ProdQty]/[Forms]![Order Form]![ProdLDU1]),IIf([Forms]![Order Form]![PriceCodeCombo]="R2",[Products]![R2 Net]*([Forms]![Order Form]![ProdQty]/[Forms]![Order Form]![ProdLDU1]),IIf([Forms]![Order Form]![PriceCodeCombo]="R3",[Products]![R3 Net]*([Forms]![Order Form]![ProdQty]/[Forms]![Order Form]![ProdLDU1]),IIf([Forms]![Order Form]![PriceCodeCombo]="R4",[Products]![R4 Net]*([Forms]![Order Form]![ProdQty]/[Forms]![Order Form]![ProdLDU1]),IIf([Forms]![Order Form]![PriceCodeCombo]="R5",[Products]![R5 Net]*([Forms]![Order Form]![ProdQty]/[Forms]![Order Form]![ProdLDU1]),IIf([Forms]![Order Form]![PriceCodeCombo]="R6",[Products]![R6 Net]*([Forms]![Order Form]![ProdQty]/[Forms]![Order Form]![ProdLDU1]),IIf([Forms]![Order Form]![PriceCodeCombo]="W",[Products]![Wholesale Net]))))))))
WHERE ((([Current Order].[Product #])=[Forms]![Order Form]![Product1]));
I tried copying that code to "After Update", "On Change", and "On Lost Focus" events but the results were the same.
Any suggestions would be greatly appreciated. Thanks!
Some of the things that bring me screeching halt really surprise me. I swear, this sounds like it should be so easy....
What I need to do is check, when the user clicks on a button, whether a specific table that is going to be modified/deleted later in the click code is already open. If it is open, I will msgbox the user to close the table first and exit the sub.
Any ideas?
All help, as always, is much appreciated!
John
I have two fields in my form contained Start time and End time. Currently, Both fields using default Time$() on form. However, End time always wrong because until we get our job done, It took atleast 20 or 30 minutes more than current default time. My question is, is there any way I can setup the End time to just click on it, and a new current default time populated?
Thanks in advance..
I have a date control and on the Click event I run the following code. Trouble is the Date Control stops working, ie you can't change the date after one click ?
CODE.
Private Sub Calendar7_Click()
weekofyeartxt.Value = DatePart("ww", Calendar7.Value)
End Sub
I have a button on a form and I want the On Click event behind it to check whether Shift is also being pressed when the user clicks the button (or Ctrl, or Alt, in fact any damn key will do).
I can't believe that there isn't a function in VBA like the old 1980s BASIC 'inkey' function (etc) that just simply returns the code of any key being held down at the time of the scan. I shouldn't have to mess around programming other events like KeyDown and KeyUp when I don't particularly need the key-press to trigger an event per se.
I am having a problem in my access database. I have a a form called Compliance Register. When this window opens it lists all of the requirements of a particular department. There is an ID and Source ID(this field can contain the same number such as multiple 17's). The descriptions match up to what is supposed to be shown. However when I double click on the item, it brings up a Compliance Status window. This is where things go wrong.
It shows the status listed as the first Source ID that matches the number, but does not seem to also be matching up the ID as well It must match both ID and Source ID since Source ID can have the same number multiple times down the list..
Here is what is under the Event Procedure for the double click.
Private Sub ListRequirements_DblClick(Cancel As Integer)
On Error GoTo Err_ListRequirements_DblClick
Dim stDocName As String
Dim stLinkCriteria As String
stDocName = "Compliance Status"
[Code] ......
Under stlink criteria, i need it to not only pull the ID, but it has to have a "AND" Source ID. I need it to pull the record that matches BOTH numbers.
I am using an active x control that when you right click on it, it automatically pops up an "About" box showing information about the control. I wouldn't object to this, but I need to use the right mouse down event for another purpose in my program. So far I have discovered that the code I put in the the event works, but only after the "About" box pops up. Is there anyway to cancel or prevent the popup? The reason that I need the right mouse down event is because is that I am already using the left mouse double click event, and I can't use the left mouse down event because then it always fires before the left mouse double click event. This control doesn't have any single click events. Ideas?
View 2 Replies View RelatedThis may be a really simple problem but it has me stumped. Working in Access 2002, I have a form with a subform (continuous). When the user clicks on a textbox in the subform, I need to capture the value and pass it to the main form so that it can be used to create a filter for yet another subform (not nested) on the main form. How could I accomplish this? Thank you in advance!
View 3 Replies View RelatedI have a continuous form with a button 'Cmd1' & a textbox 'txtMail' which is set to visible no.
When the user clicks Cmd1 - then txtMail becomes visible.
I can do it using vba on the buttons click event but when it executes txtMail for all the records become visible.
How do I use a button's click event on the form's current record - Private Sub Form_Current() so that when the user clicks Cmd1 on the current record only txtMail for that record becomes visible.
I'm using Access 2007.
I have a table EmployeeInfo containing three fields
EmployeeId
Name
FatherName
I have created form for this table.
I do not want to use autonumber for employeeid for some reasons. I want to place a button along employeeid test box on form.
User will click on the button it will get max employee id from employeeinfo table and add 1 and copy it into employee id text box.
What will be the code for button click event.