One Page Report With Subreport - Last Record Missing
Nov 9, 2011
I have a report that is fixed at one page for one record. However, there is a subreport with many transactions ("CanGrow"=No). If this goes to a new page I have to close the report and start a new one. This all works fine, except for the last transaction - if the second-to-last transaction record is at the bottom of a page then the last one does not print.
Access seems to format the data, then it realizes that it won't fit on the page so doesn't print it. I am using record id number to know which transaction record to start the next report on, so when it gets to the end my logic thinks it has reached the end as the id number is the last one in the set.
How can I know if the last record has printed or not?
I have a report which includes several subreports. There will be times when a subreport prints partially on one page and completes on the next. I don't always want to break to a new page with this subreport. However, I would want to break to a new page if the subreport cannot fully print on the current page.
i have made a query.. when executed it returns 4 results..when i view the report however (made using the wizard based on that query) only 3 results are displayed..i then add a record to the database... the query returns 5 results.. and again the report only displays 4 results...i believe that the first record entered into the database is missing from the report.. but it is present in the query.. could i have accidentally deleted the first record from the report when i was altering the layout in design view??anyone come across this before?is there a general rule with reports based on queries that only display results with certain criteria or something??
I have a report in which there is a subreport that prints towards the bottom of the page. I know that I can use grouping to have the subreport print on the next page if the entire subreport cannot print on the current page. However, I want to have the break occur not for the section as a whole but between records. Let me illustrate this.
All sorts of other stuff prints at the top. At the bottom, I have a subreport which today prints the following on the first page and breaks the last record in two printing the second line on the next page.
First Page of the Report: __________________________________________________ _______________ Doctor's Full Name: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Doctor's Location: XXXXXXXXXXXX
Doctor's Full Name: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Doctor's Location: XXXXXXXXXXXX
Doctor's Full Name: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX __________________________________________________ _______________ Second Page of the Report: __________________________________________________ _______________ Doctor's Location: XXXXXXXXXXXX __________________________________________________ _______________
What I would like to do is the following:
First Page of the Report: __________________________________________________ _______________ Doctor's Full Name: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Doctor's Location: XXXXXXXXXXXX
Doctor's Full Name: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Doctor's Location: XXXXXXXXXXXX __________________________________________________ _______________ Second Page of the Report: __________________________________________________ _______________ Doctor's Full Name: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Doctor's Location: XXXXXXXXXXXX __________________________________________________ _______________
Is it possible to specify that if a complete record within a subreport cannot be printed on the same page to break to the next page without having the whole subreport break to the next page?
I have been working on this for over a week in Access 2010 and I know that I am almost there, but need getting over this last hurdle as I have a severe case of tunnel vision on this while I am trying to get it to work.
I have a Main Report based on my Element table and a subreport based on my OTC table. There is a one-to-many relationship between the Element and the OTC table.My Master / Child Fields between the two reports are as follows: ElementID;GroupNum
My SQL for the Main report is:
Code: SELECT Val(DCount("*","Element","ElementID=" & [ElementID] & " AND Step <" & [Step]))2 AS GroupNum, Element.ElementID, Element.ProcessID, Element.ModelID, Element.Step, Element.ElementDescription, Element.RevDate, Element.GPCFS, Element.TrainingGate FROM Element
[code]...
As an example in testing this report, I am looking at a specific Element with 33 records and a total of 72 OTC records. Each of the 33 records can have 1 or 2 or 3 or up to 4 OTC records but the report is only 17 pages which tells me that the page break is occuring based on the ElementID and not on the OTC records....
I have a report detailing a summary of a patient's medical history however it is printing one patient per page whereas there is plenty of room to print multiple records per page.
I the report set to sort on surnames but have changed all the sorting and grouping criteria as far as I can see.
I am trying to set up a very simple database for inquiries we get in the office. So far i have 1 table called Pink Sheets that has Enquiry Number, Date, Details requested, Website/telephone enquiry, Property type, Name, Company Name, Address, Phone Number, etc on it.
Then i have made a form so we can add new inquiries electronically and then made 4 reports so we can see what inquiries we get by category.
Is it possible to link the record on the report to the form page?
I have a report which programmatically sets the value of some labels based on its own internal logic for each line of the detail section of a report. This all works fine and dandy, using the Detail_format event, and accessing detail.controls.item(x).caption.
HOWEVER, when I then embed the report as a subreport (which I need to do), I goes wrong. Here, I get the values of the last row of the detail repeated in every previous one. I'm suspecting because the parent report has its own 'detail' (I've tried giving the subreport its own distinct detail name).
The detail section has these lines...first line exits for all students, other 2 lines optional. Each line includes data from each of the 3 views:
Demograhic and bus/route information Special needs information Additional text information
Each student may have multiple lines in the detail section, one for pickup route, one for drop-off route and possible other routes.
Using VBA and the On Format event of the Detail Section, I have formatted the report to not display repeating information (not apply to use "Hide duplicates" feature) and not display either/both of the optional lines in the detail section.
All works well except that on the first line of each subsequent page, most of the data is missing. I have stepped through using the debugger and see that the data is returned by the query, but not displayed on the report.
I have a Report linked with a SubReport. I would like to cancel viewing this Report if my SubReport Has No Data. i tried this code but the report just shows up. Any Ideas?
Private Sub Report_Open(Cancel As Integer) On Error GoTo Err_Trapper If Reports![qryRepCurOrgProjsSR].Report.HasData = 0 Then Cancel = True End If Err_Trapper: MsgBox Err.Description Exit Sub End Sub
Ok i got an error message. Yoy entered an expression that has an invalid Reference to the hasData property.
Ive tried using a text bpx on my main report and putting a control source as
=IIf(qryRepCurOrgProjsSR.Report.HasData,0,"Nothing") Then in my Report Open Event i put the code below. But it fails me still.
If trim(Me.MyText) = "Nothing" Then MsgBox "The Report Is Cancelling....." Cancel = True Exit Sub End If
I have a report named rpt100 with two subreports srpt100a and srpt100b. The subreports are based on query qry100a and qry100b. Both queries are based on tbl100. I removed a field named 'Comment' from tbl100, as it wasn't useful; Also removed the fieldname from both qry100a and qry100b. When opening rpt100 a parameter dialog opens asking for data on the deleted fieldname 'Comment'. The field 'Comment' was never used in the report or subreports.
Inspection of the subreport fieldlist shows field 'Comment' still present.
How, other than remaking the rpt100 and both srpt100a and srpt100b, do I remove the field 'Comment'?
Below is the working version of the code works for single report filtering. say a report called "rptduedate_census2" and i can filter out using form instead of hard coding query of that report (say lastname=form!frmsample!txtlastname). I dont want to hard code query and there are reasons for that.
I am using a Main report called "rptDueDates_Dept' and there are about 10 different subreports (see print screen). The main report is not bound to any query. It has many subereport. Each subreport is bound to some query and i need to be able to filter them before data appear on the main report. Am i making any sense, LOL.
How can I implement my working code below to do this. PLEASE PLEASE PLEASE HELP. I AM NEW TO ALL THIS. I have attached a print screen of the main report, just to show how i put subreports in their.
===== MY WORKING CODE ====== Private Sub cmdPrv_Click() Dim strFilter As String
strFilter = "[Mail_Census_Date] BETWEEN #" & txtStartDate & " # AND # " & txtEndDate & " # "
' Apply the filter and switch it on
If SysCmd(acSysCmdGetObjectState, acReport, "Report") <> acObjStateOpen Then DoCmd.OpenReport "rptduedate_census2", acViewPreview With Reports![rptduedate_census2] .Filter = strFilter .FilterOn = True End With DoCmd.Restore Exit Sub End If
I have a main report with one subreport. The main report contains details of a payment being made to a supplier. There is the total amount being paid, and the cheque number being transferred. There is also a field called payref which is made invisible. This is used to link up with the subreport. The amount is the total of several invoices for which payment is being made.
The subreport contains details of each of a number of the invoices being settled. The subreport is linked to the main report via a common field called pay-ref, and the subreport is 'visible'. The subreport prints when placed in the page header section of the main report. However when there is a large number of invoices being shown in the subreport only a certain number appear. It appears that the subreport can only hold a certain number.
When the subreport is put, as it should, in the detail section of the main report, it does not appear at all in the main report. I have no clue why and I have made several reports like this one before.
linking a report and a subreport (chart). I have uploaded my sample DB. I'm trying to chart all the individuals and three fields for each Home. Both report and subreport are using the same query for the record source. My charts are blank "All_Homes_Individual_Totals". Just use date range 05/01/14, 06/24/14 on my Main form page for the data.
My second question is how would you create a chart to pull by each individual with their monthly totals per Home using "qry_Community_ Inclusion_ All_Homes" with a report and subreport (chart) as above. Report would show the individual's totals by month for each home.
I am trying to get my totals from my subreports, and dividing the number by 2 or 4, and put the new number on the main report.
for Operator/Trainer Productivity, I used: =([rptEmployEvaluationOperator subreport].[Report]![OPTotal]+[rptEmployEvaluationOperatorTrainer subreport].[Report]![OPTotal])/2
for Auditor/Trainer Productivity, I used: =([rptEmployEvaluationAuditor1 subreport].[Report]![OPTotal]+[EmployEvaluationAuditor2 subreport].[Report]![OPTotal]+[EmployEvaluationAuditor3 subreport].[Report]![OPTotal]+[EmployEvaluationAuditorTrainer subreport].[Report]![OPTotal])/4
These both work if there are values in all totals subreports. When one of them might not have a total, I get an error message.
I have a main form (ZooMobile Booking Form-New Client) with a subform (ZooMobile Event Booking-New Client) within it. In the main form I have a button to open up a report displaying the main form's current record.
The report that is opened has a subreport that needs to display the current record from the subform.
So far I've managed to get the report to open to the main form's record using the following On_click command:
I can't manage to get the subreport to open to the current record in the subform, however. I've tried to integrate it into the above event and to use On_load events in the report and subreport but everything either comes up as a bug or has no effect on the subreport's record.
I want to refer field "plyty_sa" which is in "RaportZleceniaRobocze" Report, in "RaportRobocze_Offset" SubReport. The problem is that, SubReport is in Report Footer. I tried many possibilities but I can't find solution.
I am trying to open a report (rptGMX-IRG) that includes a sub-report (srptRG) based on criteria that is set with two unbound fields on a form (frmGMXbook). This form has two dropdown boxes (cboGMX_No & cboMachSize) and a command button. The first dropdown box includes data located in the main form and the second dropdown includes data that is part of the sub-report.
I can get the report to open properly when I enter data into both fields on frmGMXbook.
However, the problem I am having is the inability to have one or both fields be "Like '*'" and show all associated records.
Here is the code I have on the command button.
Private Sub GMX_Preview_Click() Dim strCriteria As String If IsNull(Me.cboGMX_No) Then strCriteria = "[cboGMX_No] Like '*'" Else strCriteria = "[GMX_No] ='" & Me.cboGMX_No.Value & "'"
I have a report that has two sub reports one to report deposits and the other to report payments.
The report prints fine if there are records in both sub reports, however when the payments sub report is blank then the report hangs and won't print to pdf at all.