Open Tab Control For Data Entry When No Records In Table For User?

Nov 29, 2014

I am trying to open TabCtl86 forms in AddData mode if there are no records in a table for a user chosen form cboClientSearch. The tab control has three pages on it. At the moment I am getting an error saying "the form named '0' is either misspelled or doesn't exist".

I am using this at the moment; DoCmd.OpenForm Controls!TabCtl86, acFormDS, , , acFormAdd, acDialog

View Replies


ADVERTISEMENT

Prevent User From Skipping Records In Continuous Form During Data Entry

Nov 21, 2006

I have a main form with several continuous subforms. Each subform consists of several listbox controls. I would like to require the user to select an item from the listbox before being allowed to move to the next record in the subform, and upon reaching the last record in that continuous subform, to require an entry there in order to move to the first record in the next cont. subform.

As an added bonus, it would be nice, though not necessary, to automatically jump the focus from one record to the next after data is entered. But my basic goal is to avoid skipping records.

Caveat: I cannot use the "required" option in the field to which the control is bound because that field has a default value previously entered using an append query. (The default value basically means "not yet entered" and is not one of the options in the listbox. I am using this because this field is a foreign key in the table, thus it must have a value in order to have a record with which to populate the subform.)

My apologies if this has been asked and answered elsewhere, but I've searched and, while I found a few related threads, they don't quite answer my question. Here they are for reference:

http://www.access-programmers.co.uk/forums/showthread.php?t=38364
http://www.access-programmers.co.uk/forums/showthread.php?t=69047
http://www.access-programmers.co.uk/forums/showthread.php?t=103176

Thanks for any help! Also, if you are going to recommend VB code, could you be specific about how and where I should use it? I'm not afraid of code, but I'm definitely new to it...

View 7 Replies View Related

Forms :: Saving Specific Data From Data Entry Form Depending On User Selection

Dec 18, 2014

I am trying to save specific data from a data entry form to a specific depending on what the user selects from a dropdown/combo box.

So if the user selects "test company from the combo box, that data (from that form) will save to the Test company data table.

View 5 Replies View Related

User Friendly Data Entry

Jun 29, 2006

Please Exuse the question I am about to ask. I am a bit rusty with Access and cant remember how to do the following. I have tried and tried to work it out and tried various help searches but cant get the answer I'm looking for.

What I need to do is create a data entry form, very simple! However I want the user to be prompted to enter a project name and number in order to find the project that i want the new data to be entered under. Then it will need to create a new record in that project ready for new data to be entered from the data entry form.

I hope it is clear what I need to do

View 1 Replies View Related

Forms :: Data Entry Form - Set Focus On Tab Control

Sep 10, 2014

On my data entry form I have a tab control with three pages

At the bottom of the first page I have a sub form with 3 fields

Currently, when tabbing, the focus runs through the fields as per the tab order

BUT

Once it gets to the subform (datasheet view) it jumps into the first field of the first record rather than the first 'empty cell' thereby starting a new record in the datasheet.

Once the three fields in the datasheet are completed the focus tabs back to the top of the first page of the form rather than onto the next page of the form

How to correctly reference controls using VBA so I could SetFocus where I want?

The Main form is called frm_Admissions

It has three pages called Patient, Treatment & Service Providers

Patient has a subform called sub_Cluster (which may or may not hold Cluster Information)

I would like the tab order to jump from the last textbox on the form into the first field of a new record in the datasheet (rather than the first field of any existing records)

Once it has finished in the datasheet I need to tab to the first field/textbox in the Treatment's page of the form rather than back to the first field/textbox in the Patient's page.

View 3 Replies View Related

Calc User Totals Table 1 And Enter In User Records In Table 2

Oct 28, 2004

I have two tables. The first contains details of a budget holders money allocation for a given period, and the other tracks their spend on products over that period. How can I generate a query to calculate the total running spend for each user from the "budget spend table" that will be written into the users record in the "budget allocation table".

My aim is to show details of budget allocation, total spend to date and remaining budget for each user in an Order form / report.

Can anyone please advise me on how to do this or suggest another way of doing it. Any help would be greatly appreciated.

Thanks in advance.

Regards Peter

View 5 Replies View Related

Data Entry - Auto Fill Data For Exisitng Accounts In Records

Mar 9, 2006

First I would like to give thanks to all the knowledgeable folks here who have helped me with my DB to date. It is working and every one is very happy and I have learned a lot.

So now I would like to add some more functionality to this existing project.

My DB is for data input of customers for a drawing. It has the following fields: Id, account number, first name, last name, date/time, score1, score2.

I t is taking a great deal of time for the users to enter in hundreds of entries a day. Most of the entries are customers who are already in the DB. I would like to get the fields to auto fill the data for existing customers say after the account number is entered. So after you put in the account the name and any other pertinent data would shows up saving users from typing it in again.

The first problem I am having is that this is still a data entry form and I can’t figure out how to be able to see the account information and still add new data to the record? The new data is a daily score they get.

Second I haven’t figured out how to call up the customers information from just the account field.

I’ve googled this and haven’t found anything terribly helpful.

View 2 Replies View Related

Forms :: Open Form From (Edit List Items) Option In Data Entry Mode

Feb 4, 2014

I have several comboboxes in my database from which users select values. However, in most cases, I do want to give them the option to add an item that does not appear while simultaneously updating the underlying table which stores those dropdown values. I have made use of the builtin "allow edit list items" feature of Access 2007 but the form always opens on the first record of the form on which they are to add the new item. Is there a way to specify that it should open in Data Entry view apart from using VBA?

View 4 Replies View Related

Creating Dynamic Hyperlinks - Open Data Entry Form And Navigate To Specific Record

Nov 28, 2011

I have a form that lists records in a table. I would like to have a hyperlink beside each record that will open the data entry form and navigate to that specific record. Right now, the use can only open the form for all records and has to use the record navigation buttons to find the desired record.

View 1 Replies View Related

Control Button To Open Table.

Jul 26, 2005

the wizard does not have a button to open tables...i have been using this code to open forms...what needs to be changed in order to make it open tables?

Private Sub Command5_Click()
On Error GoTo Err_Command5_Click

Dim stDocName As String
Dim stLinkCriteria As String

stDocName = "intakeMatrix"
DoCmd.OpenForm stDocName, , , stLinkCriteria

Exit_Command5_Click:
Exit Sub

Err_Command5_Click:
MsgBox Err.Description
Resume Exit_Command5_Click

End Sub

View 1 Replies View Related

Table Exclusively Open By Another User Problem

Jun 27, 2006

i have a form that uses a text box to search through my bookings, and when the user double clicks on the record in the listbox it loads that record in my main booking form..

this works fine. the problem is this..

i will search and find a record using the text filter.. i will double click on the record and it loads in the booking form.

i then close the booking form, and the search form is still open in the background..

if i then click on another record in the search form, i get this message..

runtime error 3008, the table bookings is already opened exclusively by another user... etc

below is the code in my search form, is there anyway it can be edited to make sure this doesnt happen.


Option Compare Database
Option Explicit


Private Sub QuickSearch_DblClick(Cancel As Integer)
DoCmd.OpenForm "newBOOKINGS", , , "[bookingid] = " & Me![QuickSearch].Column(0)
End Sub

Private Sub Search_Change()
Dim vSearchString As String

vSearchString = Search.Text
Search2.Value = vSearchString
Me.QuickSearch.Requery

End Sub

Private Sub QuickSearch_AfterUpdate()

DoCmd.Requery
Me.RecordsetClone.FindFirst "[bookingid] = '" & Me![QuickSearch] & "'"
If Not Me.RecordsetClone.NoMatch Then
Me.Bookmark = Me.RecordsetClone.Bookmark
Else
MsgBox "Could not locate [" & Me![QuickSearch] & "]"
End If

End Sub

View 3 Replies View Related

Modules & VBA :: Alert About Existing Records During Data Entry?

Jul 23, 2014

I need to alert the user of the database in case he/she enters a record that already exists in the database. If a person enters a key type and a serial number combination that already exists in the system and has status "issued", I need a pop up message to show up.

Am I missing some quotation marks somewhere in that DCount?

Private Sub SerialNumber_AfterUpdate()
If DCount("*", "tblIssuedKeys", "KeyType = '" & Me.KeyType & "' And "Status = 'Issued'" And SerialNumber = '" & Me.SerialNumber & "'") > 0 Then
MsgBox "This key has already been issued"
Cancel = True
End If
End Sub

View 2 Replies View Related

General :: Updating Table Data With Data From Preceding Entry?

Jan 5, 2013

My question is this: I have a table where I'm entering employees' hours worked. Basically, it's something like this:

ID WorkerNumberDateworkedTimeStartTimeEnded
121/2/201310:00:00 AM3:00:00 PM
221/3/20132:00:00 AM11:00:00 AM
321/4/201312:15:00 AM11:30:00 AM
421/5/201310:25:00 PM11:00:00 AM
531/2/201311:00:00 AM3:30:00 PM
631/3/201312:00:00 PM10:00:00 PM
731/10/20137:00:00 AM4:00:00 PM

I have a query that (easily) determines how many hours an employee has worked on any given day. What I can't figure out at all, is how to write a query that can figure out how much time an employee had off in between shifts.

Thus far I'm able to run a query that separates this main table into individual workers by their id numbers, but can't figure out how to determine time off between shifts - as the last hour worked one day, and the first hour worked the next day are on two different lines (they are two different table entries).

View 4 Replies View Related

Modules & VBA :: Data Entry - Subform Creating Orphan Records

Feb 13, 2015

How do I display a more meaningful message instead of the cryptic error about having to enter data into blah blah blah. How can I trap that error and provide them a more meaningful message about entering data. I have tried the following;

Main form name frmPatientRecords
Sub form name DentalRecords Subform
Private Sub Form_BeforeUpdate(Cancel As Integer)
If Nz(tblPatientDetails!recordid, 0) = 0 Then
MsgBox ("sorry. Please complete the main record entry")
Parent.SetFocus
End If
End Sub

View 14 Replies View Related

Forms :: Changing Data Entry Value To False To Edit Records

Mar 19, 2013

I have the main form open up where the Data entry is set to YES so it opens in New Field. I created a button to change the value of form's Data Entry to NO. It works. Changed the form so I can navigate through entered fields. I have created a drop down to filter a specific field "Claim#" and it will open that entry.

The drop down only works if I set the default form's Data Entry to NO. Dropdown works and I can select Claim#. But if I open the form with DataEntry set to Yes, and I click on the button to change the value to NO, the form changes but the drop down field does not pull up the proper information. The button code is.

Private Sub EditButton_Click()
Form_MainForm.Form.DataEntry = False
End Sub

The Claim drop down has this event after update

Private Sub ClaimSearch_AfterUpdate()
Me.Requery
End Sub

I'm missing something. Like I said, it works without having the button change the value.

Access 2010

View 1 Replies View Related

Forms :: Data Entry Form To Add New Records To Access Database File

Sep 30, 2013

I have a data entry form to add new records to an Access database file called Claims. An auto-incrementing sequence number (SeqNbr) needs to be kept PER YEAR. If the user enters a date the sequence number pertaining to the year of this date needs to be incremented. The first record within a new year of course takes value 1.Records can be added at random for different years.

A simple SQL-statement can be made to determine the new sequence number:SELECT max(Claims.SeqNbr) + 1 from Claims where year(this.value) = year(Claims.EventDate)...this.value meaning the value of the date control in which the user entered the date.I need to return the new sequence number to another field on the form in which also the COMPANY CODE, YYYY and MM from the EventDate, the new sequence number and the USER INITIALS are concatenated.

View 4 Replies View Related

Create An Entry In A Table Based On Records Matching

May 23, 2006

Where a many to many relationships is resolved with a linking table...Is it possible to create an entry in the linking table where the two linked tables have the same value e.g. create a entry in the linking table where client table has same value as a job profile table i.e. both are in insurance. Therefore want to create an entry in the middle table with foreign keys from either link automatically

ta

View 1 Replies View Related

Modules & VBA :: Updating 100 Records In A Table Using Single Form Entry

Feb 25, 2014

I Work for an NHS organization. A department here orders prescriptions and sends them out to Gp Surgeries. I have been tasked in designing a database to make this easier for them.

Prescriptions arrive on a Pallet. Each pallet has 100 Boxes of prescriptions on it. Each box Contains 2000 Individual prescriptions. I have a table which contains the following:

Box Number
Serial Start Number
Serial End Number

When the user enters the first box number and the serial start number, i need it to calculate the serial end number and insert another 99 rows into the table and also calculate the serial start and end numbers for these other 99 records.

View 13 Replies View Related

Data Entry In A Junction Table

Dec 18, 2007

Hello all,

I just wanted to run this by some experts before I go mucking around in my db. Basically, I am creating a data entry form to populate with information about car parts, and the vehicles they apply to. This is what I am working with:


tblParts tblModelsParts tblModels
PartID ModelPartID ModelID
PartNumber PartID ModelNameID
PartDesc ModelID ModelYearID

I am trying to build a form that will allow me to enter new part numbers and descriptions into the table, and then have the user select (through a listbox?) all the vehicles the parts apply to. Is there a way to populate the junction table with each combination of partID and ModelID automatically? NOTE: tblModels is already populated with data.

I am assuming there would be a way to do this... A query of the junction table (and tblModels?) as the recordsource for the form, and then a subform with the tblParts as its recordsource?

I would have posted this in the massive thread I have going already... but I thought it might be nice to give Craig and Adam a break from helping me :o

View 14 Replies View Related

Conjunction Table Data Entry

Aug 22, 2014

i have 2 tables, "Items" and "Locations" and i created one to many relation from each table to 1 conjunction table, and Added one extra field called quantity into the conjunction table, so now the conjunction table has 4 Fields, ID AutoNumber and "Item" "location" "quantity" Fields, ok and i turn it into query then put the fields in form and use it as a data entry

im looking for a way, where if I choose an item From the item combobox, the locations where this item has quantity in it, would be available in the locations combobox, so i can add on the existing quantities...or to make it eazier, when i choose an item, it would let me choose all the location names which have this item next to it, so i may ( edit and add) the previously set quantity field

View 5 Replies View Related

Using A Table For Both Data Entry And Building An SQL String

Oct 8, 2007

I have a table that lists county names. On the data entry form only the county names are displayed. However, I have another form that is used to build a custom query based on various criteria, of which county is one.

To make the table compatible with both both forms, the data source for the dropdown list for data entry is: Select * FROM county WHERE county <> "No Selection"

For the SQL form the code is simply: Select * FROM county The default value of the dropdown list is "No Selection". When dropdown list for county is set to "No Selection" the program interprets it as "select all counties". Other dropdown lists provide other parameters such as the project year, nature of the project etc. Each of these other dropdown lists also have a default value of "No Selection". The SQL form thus gives me the ability to mix and match several criteria. For example, it will display all projects in a particular year for a particular county or all projects in all counties that involve the construction of a residence.

My question, instead of physically having the string "No Selection" in the table itself, is there a way to embed the phrase "No Selection" in the SQL expression itself and still have it as an option on the dropdown list?

View 1 Replies View Related

How Do I Lookup Something From A A Different Table On A Data Entry Form?

Aug 23, 2006

Okay, for simplicity's sake, I have a data entry form.

It is bound to tableData.

Inputs are:

ProductID
Customer Name


ProductID is a combo box.

There is another table called tableProduct. In this table, is ProductID and ProductName.

For convenience sake, when a user chooses a ProductID from the combo box, I want it to lookup that ID from tableProduct. However, how can I do this when everything is already bound to tableData?

Thanks in advance.

View 1 Replies View Related

How Do I Lookup Something From A A Different Table On A Data Entry Form?

Aug 23, 2006

Okay, for simplicity's sake, I have a data entry form.

It is bound to tableData.

Inputs are:

ProductID
Customer Name


ProductID is a combo box on the form.

There is another table called tableProduct. In this table, is ProductID and ProductName.

For convenience sake, when a user chooses a ProductID from the combo box, I want a separate textbox to lookup that ID from tableProduct and display the ProductName.

How can I accomplish this?

Thanks in advance.

View 2 Replies View Related

Using Table Data Query For Entry Validation Rule

Aug 15, 2007

I'm new to access so I thought this would be easier than it is. I have a list of cities in a simple table . I want use this list (or a query of it) to create a validation rule for a field in a second table "City". How, either with VBA or some other method do I use the Cities database to validate entry. These tables are both in the same project.

Any help is appreciated.

View 2 Replies View Related

Data Entry Form Pulling Info In From Other Table

May 17, 2006

Hello,

New to access :eek:

Trying to create a simple data entry form to get information and populate fields from another table. i.e. type in info in one field and the other fields are displayed in the form with information from another table.

Any help apprecated :)

View 3 Replies View Related

Queries :: Field In A Table That Keeps Rounding Data Entry Off

Nov 11, 2013

I have a field in a table that keeps rounding the data entry off. It has identical properties to the field next to it but one rounds and the other does not. I tried deleting the field and creating a new one.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved