Open A Form With A New Record With Selected Info Already Filled In
Sep 29, 2006
Hi again,
One last one that's been niggling me - I just can't fathom the code... I bet it's very simple...
I have a Form ("frmJobSummary") that shows all the jobs for a customer - the customer is selected and the Customers ID is stored in a Control called "CustomerID" (It's just a number)
I have a button that opens up a new form... "frmEditJob" This allows you to add a job to a customer. I know how to get it to open up as a new record... but...
How do I get it to open up as a new record (or job) for the customer selected on the form "frmJobSummary"?
Here's the code so far... all it does is open the form with the Current record. :(
Your help is, as always, most appreciated!
Private Sub OpenNewJob_Click()
On Error GoTo Err_OpenNewJob_Click
Dim stDocName As String
Dim stLinkCriteria As String
I have a form that updates records. When the user opens the form in data entry mode, it is too difficult to find the correct record. What is the most efficient and simple way to have the form open to a specific record?
Solutions I have considered are a popup form that the user will enter the equipment code (which is the unique identifier of all records). Also, the user may not know the record number, but they will always know the equipment code (which is a field in the "equipment" table).
But I am not sure of the best way/best order to do this.
I have a listbox on a form that show all Files for a particular volunteer. I have an "Edit File" button below the listbox to be able to edit that particular file. Is there a way about opening that form to that specific record without using a query?
I have created a form, which extracts records from a table and displays them in a list box. This works, but what I want to do next is highlight a single record in that list box, click a button and have the record open in another form. This is the code I have at present:
Private Sub DisplayEnquiry_Click() On Error GoTo Err_DisplayEnquiry_Click Dim dispCriteria As String
When I try this I get an error "The OpenForm action was canceled. You used a method of the DoCmd to carry out an action in Visual Basic, but then clicked Cancel in a dialog box."
I've double-checked that I've typed in the correct names etc. so I am at my wits end! Can anybody help me out? Thanks
I have a parent form showing some of the contents of a single record in a parent table. This form contains a button that opens a specific subform (using an IF statement based on the contents of another field in the parent table/form. There are actually any of 8 child forms/tables that could be selected and the related record is in only one of them. The relation between the tables is based on the PK of the parent table and the related FK in the child table. and the data is correct in all tables.
My problem is that when I run this button on the parent form/table it returns the appropriate form/table, but displays the first record rather than the related record. In the past (using this same process) I have been successful in getting to the right record by fiddling with the where statement (sometimes putting in a equal sign or taking it out fixes the problem). However, no matter what I do to the Where statement nothing works. I have not yet placed the final else condition for where the form selection field (VMValIdentType] is empty yet as there is no point at this time.
Here are the button macro contents:
If [VMValIdentType] = "Software" OpenForm Form Name: tmpVMValSW View: Form Filter Name:
(MACROS ONLY)I am looking for a way to open a form in order to add a new record. The idea is that I open up the form with a MemberID and possibly the name already filled in on the relevant form. It is merely for ease of use regarding the user.
I have got as far as opening the the new entry form. I just need to pass the MemberID into the relevant field. If I use the wizard it is just finding a record of a pre-filled entry.
I am trying to open a word document with corresponding data filled from the text field of a form. I managed to get the word document but I don't know how to give a variable in word document.
I have a Form1 that is based on a select query with a criteria [Enter PIN number]. When we enter the PIN it returns the correct result. I want to have a button that opens a second form based on the same PIN number entered to open the first (in fact there will be numerous forms I want opened based on this PIN).
Example:
Sidewalk - button Curb X button Tree - button Hydrant X button
In the example above, only CURB and HYDRANT returned an entry. Therefore when I click on the button next to CURB I'd like the frmCurb to open showing the data based on the PIN numbered entered to open the From1, and when I click on the button next to HYDRANT it would open frmHydrant showing the data for HYDRANT based on the same PIN number entered to open the Form1.
I have a report that is based on a query. The query has filters in it based on user info entered from a form. So the form asks the user to select which division of the company, and the date range for when the info applied to. My issue is that I am trying to set a macro that opens this form whenever some tries to open the report.
But the macro appears to run the query before it opens the form and it gives me a generic message box asking for the division. After I type that in (instead of selecting from a drop down list like I have on my form) another window pops up asking for start date, etc...instead of opening the form I created. What am i doing wrong and how do I get the macro to open my form? If I open the form directly and enter the criteria, it runs the report correctly.
We have Cardiac Rehab patients that come 3 times a week (M-W-F). Once they are on program they stay there for 3 months. There are classes given hourly from 8am thru 6pm. There are 12 available slots per class. Right now this is being handled in Excel, but I thought I might improve things by putting it in Access.
The Excel "form" I built has fields for PatientName, MedicalNotes, DoctorName, and Notes. Because the names rarely move (a patient gets a slot and stays there) the user opens Excel, reviews the form to make sure no one cancelled-is out sick-etc, then prints the schedule. When the day is complete I have a macro that takes this information and saves it in a tablelike manner on another sheet. A dynamic pivot table references this info to give the user quick answers as to daily volume, etc.
The thing I can't get my head around is how to make this as easy in Access. My thought was I could have a PatientT, listing all of the fields mentioned above. I could have DailyF open, bound to PatientT, with additional unbound textboxes to add "today's date", cancellations or no shows, and then Save all of this in another table and print out the daily schedule.
I'm developing a database where people basically can fill in an order form and then the database can track if the order has been placed, when it came in etc.I have a form called frm_Suppliers to be Ordered that runs off a query. The tables that relate to the query are called tbl_Products, with a primary key called ID and tbl_Suppliers, with a primary key called Supplier ID.
The form called frm_Suppliers to be Ordered, shows a list of suppliers that have open orders. Each supplier may have several orders open. I want to be able to click a button after each supplier name and bring up a continuous form that relates to all the records from that supplier that have open orders.
I have tried using the code found in the thread called "open a form based on the record that is selected in current form" from 06-08-2011, however it will only work when my form lists each open order separately, not when they are grouped by supplier.
I am new to access and I recently encountered a double click issue
My form loads perfectly on double click event but it shows the first record instead of selected record.
My search is based on a PersonID but each PersonID has different WorkID that I wish to display on double click but it always shows the first WorkID instead of my selected record
I have tried changing the filters in the form properties but it still doesn't work for me.
Here's my code:
Private Sub SearchResults_DblClick(Cancel As Integer) DoCmd.OpenForm "WorkForm", , , "[PersonID]=" & Me.[Searchresults], , acNormal End Sub
[Searchresults] draws information from my Query
Query information:
PersonID... WorkID... Type......Location 1234..........1............Paint .....Address A 1234..........2............Electric...Address B 1234..........3............Floor..... Address C
Bit of a problem I'm hoping someone can help with. I have a telephone call logging system. The system is a tabbed form with each tab representing a person's Telephone Call Inbox. As new calls are entered into the database, they appear in each person's inbox until they are marked as dealt with.
This all works fine and there are no problems with the basics of it, but the problem I do have is that after I have split the database into a Back end and a Front end and distributed the Front ends to each user, when a new call is entered it doesn't appear in the persons inbox until they do a requery.
At first I sent the form to requery using the ontimer event, but the problem I have is that after every reqery the form goes back to the first record. A user on the office forum suggested I use the following code:
Can I look up and verify data on a "second" form based on a selected record from first (still open) form.
I am trying to allow users to select a User Name from a combo box list and then open "Change Password" form when they select "Change Password" for that selected user name.
My problem is that I can't figure out how to associate and verify the data tied to the user name selected on the previous (Login) form ( I am trying to validate the old password tied to that selected record).
I have the first login form created, and it's working just fine. I also have the change password form created (and it's displaying the user name selected from the first form using:
Code: Private Sub Form_Load() With Forms![frmLogin]![cboUserName] Me.txtPwdChgUserID = .Column(2, .ListIndex) End With EndSub
I also have the code written to validate and confirm old password, new password and validate new password (when the save button is clicked). I have yet to update the password with the new password (still trying to figure that out).
Attached zip file has screen shots of the two forms.
I suspect this is probably rather easy, but I've not been able to figure it out:
I am using a combo to select a record in a form. This works.
The problem is: When I navigate through the records in the form, the combo box does not "update". I need to be able to change the record displayed in the combo box as the record in the form changes.
I've search around the forum and haven't come up with the answer yet.
So here goes...
I have a main form (GRCSearch) that is tied to a table (StoredSearches). When users enter data in this form it saves it to the table. It is a single record form. The data entered by the user is used to search a big second unbound table via some queries.
The search data entered is then recorded to the table (StoredSearches) as a way for the user to track searches and to recall them if they want to run the same search again.
I've created a pop-up form that displays a continuous record layout of the StoredSearches table and a command button at the left of each record.
I want the user to be able to click the command button to the left of each record in the pop-up and that in turn set the focus of the main form to that record. It recalls the search data, repopulating the search fields of the main form. And in the onclick event I'll also have it close the pop-up window.
I however cannot find any references to setting the focus from one form to another form this way. I've found plenty that changes the focus of a form from an embedded subform.
I have continuous form in Access 2010. I highlight selected record. Now I would like when user will select record, that record will display button to give ability user delete it. For not selected records button not visible and disable. How to display button only in selected record in continuous form?
I have a form (Student Details) that has an unbound lookup box using a query to select a student. The lookup has the hidden Student ID autonumber key field plus Class Number, Last Name, First Name, Status, sorted by Class Number (descending), Last Name, First Name.
The form record source is a similar but unsorted query.
There are nearly 1000 student records. The form has pages (tabs). The lookup box is in the form header. There are dozens of fields in the 1st Page (General) including an picture (attachment, not hyperlink) field holding a photo of the student, the other 6 pages have less.
When you select a student via the look up, at least one sometimes more students "flash" before it displays the one you want, which seems to display twice before it stops.
I deleted the picture field to see what difference that made, because it seemed to do the most flashing, and indeed, without that field you go right to the record. I looked at the Student table indexes and it seems that field type is not index-able, which is understandable.
Is there any way to improve this with still leaving the photos as attachments? Some thoughts:
It improves if it is displayed first as an Icon or Paper Clip, and probably would if a hyperlink field, but we like to have the picture displayed and not have to open the link to see it nor worry about the location changing invalidating a link. It seems that if the record was displayed with the picture field only filled after all the other fields were filled it would make for a better impression.
Can an On Load form event VBA or Macro be written that either hold the picture back until the rest of the fields are displayed or if an icon or changed to a hyperlink to open. Would it work if the pictures were attached to a separate joined table?
I have a form with 3 tab controls. Within each tab, there is a bound list box that lists records based on a combo box selection. All list boxes are bound to the same table and records in each tab will be in the same order.
I would like the same record be selected in each list box within the tabs, e.g. when record #2 is selected on tab1, the same record will be selected on tab2 and tab3, or if I click on tab 2 again and change the selection to record #3, record #3 will be selected on tab1 and tab2.
The situation is i have two forms, looking at the same table, but the main table shows more records, I would like to select a record in the datasheet subform and have the main form flick through to the corresponding record.
I have a form "IntUnderwriterSearchByName" which is based on the query "Search by Name". This form opens with a parameter (please enter name of broker) and is set out like a datasheet with the following fields- "Broker Name", "Domicile", "Broker Code" and a couple of others. I'd like to be able to click on a record and open the form "IntUnderwriterPopUp" so that the details of that specified record are displayed.
Broker Code is what I'd like the form to look for and this Broker Code is unique for every one of the 900 or so records. This code can be numerical e.g. 01233 but also can be a mixture of both e.g. EU2885. It is also worth noting that this code is not the primary key- i have an autonumber (called ID) that does this- but this field does not appear on the form.
I am creating an events database. In my main form, I have all the details of a single event (billing code, fees, customer, support personnel, etc.). Then, I have a subform (form view) that lists each of the other services which share an event ID (this ID comes from a separate, unrelated events management suite). In the subform, I display the most-commonly-edited fields so that they are editable without navigating to a different record.
However, there will be instances where it becomes necessary to navigate to one of the records listed in the subform. I would like to make this a quick process by just clicking on the primary key in the subform, and have the corresponding record appear in the main form.
In my searches I've found a common suggestion to use a DoCmd.OpenForm method where the form opens to that specific record -- in effect filtering by the primary key number. I don't prefer this method because it disables the ability to navigate to other records using the previous, next, find records, (etc.) buttons without closing and re-opening the form.
Is there a way to make the main form 'jump' to a specific record by clicking on a control in the subform, without limiting the ability to navigate in the main form?
:confused: I have created a frame which controls two seperate combo boxes for searching based on either serial or name. What I'd like to do is have the user combo box [after update] to open a sub form with all of that specific users particular assetts. Only by that user.
HEre is the code for which I've already got. Also I've already created a query which controls the subform to find only a particlar users assets:
Private Sub Combo106_AfterUpdate() ' Find the record that matches the control. Dim rs As Object
Set rs = Me.Recordset.Clone rs.FindFirst "[Serial #] = '" & Me![Combo106] & "'" Me.Bookmark = rs.Bookmark End Sub
Private Sub Combo108_AfterUpdate() ' Find the record that matches the control. Dim rs As Object
Set rs = Me.Recordset.Clone rs.FindFirst "[Users] = '" & Me![Combo108] & "'" Me.Bookmark = rs.Bookmark End Sub
Private Sub SearchFrame_AfterUpdate() 'Make the appropriate combo visible If Me!SearchFrame.Value = 1 Then Me!Combo106.Visible = True Me!Combo108.Visible = False Else Me!Combo106.Visible = False Me!Combo108.Visible = True End If