I all I have looked in the forum but can't find anything that matches I have a form containing a subform called eventswich shows some events in date order, as I have too many information on the table events I could not put them all in the subform if not only the essential information, what I need is if I double click on the field "DATE" it would open the "EVENT" form and show me all the information contained in the record.At the present time I have the filed SELECT RECORD set to NO on the form properties!
Hope I have given a good explanation!!!!
Thanks
Marco
I want to Double-Click on a row of a subform to open a related table/form that are connected with a common ID. So far, I tried the following code, but it does not work.
Private Sub PackingSlipT_subform_DblClick(Cancel As Integer) Dim stDocName As String Dim stLinkCriteria As String stDocName = "ProductT" stLinkCriteria = "[PackingSlip_ID]=" & Me.PackingSlipT_subform.Column(1) DoCmd.OpenForm stDocName, , , stLinkCriteria End Sub
I have a few search forms that, when search parameters are entered, a continuous subform displays the results (summarised...not all fields show).
I want to be able to double click a field in any given record, and have it open in a form allowing editing of the record.
I know I need something in the OnDoubleClick event of the text box I want to double click, which would then open the form, but I don't know what code to use.
For the sake of argument, I want to double click on the txtSerialNumber text box to do it, as this is a unique field.
I have the following code that I have been trying to get to work:
Private Sub txtSocNumber_DblClick(Cancel As Integer) On Error GoTo Err_txtSocNumber_DblClick
Dim stDocName As String Dim stLinkCriteria As String
stDocName = "FrmApplicantFullDetails"
If IsNull(Me.txtSocNumber) Or Me.txtSocNumber = "" Then MsgBox "This record is empty", vbInformation, "No Data" Me.txtSocNumber.SetFocus Else stLinkCriteria = "[ApplicantID]=" & Me![InvestigatorID] DoCmd.OpenForm stDocName, , , stLinkCriteria End If
Exit_txtSocNumber_DblClick: Exit Sub
Err_txtSocNumber_DblClick: MsgBox Err.Description Resume Exit_txtSocNumber_DblClick End Sub
I have the following two tables:
Applicant and Investigator
Applicant: ApplicantID InvestigatorID etc
Investigator: InvestigatorID etc
The relationship is setup as 1 investigator to many applicants.
What I am trying do is this. I have form with a subform in it. In the subform there is applicant info IE SS# LName, FName and that is it. What I want to do is be able to double click on the SS# have the form "FrmApplicantFullDetails" open so you can view the work up on the applicant or edit info on the applicant.
Am I going about this the right way with the above code? Or is there something else I am missing in the code or is there code out that will do what I am looking for that is easier?
I am trying to create a proposal log for my company to make things easier to track. I have made a multiple items form to list the proposals. I want to be able to double click the record to open up another form (that i have already created) that shows the information from the proposal table and the proposal details table. So.....
I want to double click the field named "Proposal Name" and have it open up to form i have called "proposals details form".
I have a mainform named EMA and a subform named Q_EMO. In the mainform there is one event related to a patient.In the subform Q_EMO there are all the events releted to the patient.I would like to get a record in the mainform EMA when I double click in the record of the subform.
Hi all I have a form with inserted a subform, I would like to double click on the field "date" on the subform to open the relative complete record on the original mask! Thanks M
greetings all..i have tried to use an old database template i had and re-work it for my new client..basically the user types a ref no into a search box.. there is a text list that is narrowed down to the chosen item as they user types..then they double click on the item in the list and it opens in the main form..this is how it should work.. i think im pretty close but im gettin a few problems.. i would be very grateful if someone could have a look at it...the form i want all this to happen on is called MAINFORM.. the database is very simple.. one table.. one query.. thats it..thanks..
i will show you my list box code. i would like to make it possible for my user to double click on an item in the list and it opens that record in my 'zEnquiry' form (which has the correct named fields to display the data already)
i had some double click code but i deleted it, and now ive forgotten which post i found it in.
here is the code for my listbox
Private Sub QuickSearch_AfterUpdate()
DoCmd.Requery Me.RecordsetClone.FindFirst "[Enq_Forname] = '" & Me![QuickSearch] & "'" If Not Me.RecordsetClone.NoMatch Then Me.Bookmark = Me.RecordsetClone.Bookmark Else MsgBox "Could not locate [" & Me![QuickSearch] & "]" End If
I have a text box on my form which I use to attach hyperlinks to pdf's, this works great but after inserting a hyperlink nothing is displayed in the text box to show it has been linked unlike using attachment, the only way I know if that a hyperlink is placed is to right click and go to hyperlink and then open, is there a way to show the link on the text box and just double click on it to open the pdf. I am trying this as the size of the database will far exceed the 2gb that access allows if I just use attachments , even if I split the database (over 10000 pdfs )
I have the following code attached to a form: Private Sub Go_To_Project_Click() On Error GoTo Err_Go_To_Project_Click Dim stDocName As String Dim stLinkCriteria As String stDocName = "Project Main" stLinkCriteria = "[R&D ID#]=" & Me![lstsearch] DoCmd.OpenForm stDocName, , , stLinkCriteria Exit_Go_To_Project_Click: Exit Sub Err_Go_To_Project_Click: MsgBox Err.Description Resume Exit_Go_To_Project_Click End Sub
Private Sub txtsearch_AfterUpdate() Me.lstsearch.RowSource = "Select [R&D ID#], [SKU#], [Project Name], [Construction level], [Manufacturer], [Hobbico Status], [R&D Work By], [Product Manager], [Desktopper]" & _ "From [Project Main]" & _ "Where [Project Name] like '*" & Me.txtsearch & "*'" & _ "OR [SKU#] like '*" & Me.txtsearch & "*'" & _ "OR [R&D Work By] like '*" & Me.txtsearch & "*'" & _ "OR [Product Manager] like '*" & Me.txtsearch & "*'" & _ "OR [Desktopper] like '*" & Me.txtsearch & "*'" & _ "OR [R&D ID#] like '*" & Me.txtsearch & "*'" Me.lstsearch.Requery End Sub
Private Sub Exit_Search_Click() On Error GoTo Err_Exit_Search_Click DoCmd.Close Exit_Exit_Search_Click: Exit Sub Err_Exit_Search_Click: MsgBox Err.Description Resume Exit_Exit_Search_Click End Sub
Basically a text string is entered in the txtbox and a list of matching records shows up in lstsearch box. One selects the desired record in the lstsearch and clicks on the "Go to project" button and the appropriate form (aka "Project main") and subform (aka Project History) open up with the desired record and record history.
What would I need to add to lstsearch so the users can double-click on the record to open it instead of selecting it and clicking on the "Go to project" button?
How do I reference a subform DS field to open up a tabbed form on another subform.
Here's what I have.
field one on the Sub DS opens up tab one on another form, as does field two on DS open tab two on another form.
but..
how can I click on "any" field on the DS, run an IF statement, and it checks if that record on the Datasheet, contains information in regards to, IF field one OR field two contains any data, and opens the tabbed form respectively on the other form?
I have a Project form, which holds StockArtProduction_Subform in datasheet view. I need for them to be able to click on the ID in the StockArtProduction_Subform datasheet and it open a single view form (StockArtProduction) with the correlating ID.
Ideally, it would also work for new entries in the StockArtProduction_Subform, but the StockArtProduction form would have to "auto populate" (did I use it right?) with the ID of the currently open Project form.
I need created a form frmFlight this form has two fields called DEP and ARR what I need is when the users types the 3 letter code in the DEP or ARR field if these do not match the any records in field AirportCode in the table tblAirport will highlite a error. Also I need to double click on the field DEP or ARR in the frmFlight and open the frmAirport with the specific record. Example if one of the records contain LCY by double clicking it will open the form frmAirport displaying the LCY record.
I want to add an event on Form Header when double click it will filter the values, which i did with macro, but could it happen on second time double clicking it it refreshes whole as original?
I have a datasheet view where the 1st field has an event.
Private Sub WorkOrder_Click() DoCmd.OpenForm "Engineer Entry Update", WhereCondition:="[Workorder]=" & Me.WorkOrder End Sub
The form "Engineer Entry Update" opens but the require data in not there until I press the WorkOrder_Click() again.Then it is populated. Why do I have to double press?I would like a single click to open the form a populate.
I'm in desperate need of a (simple I guess) code to allow me to send records from my listbox to a new form. Scenario goes as follows:
I use cascading combo boxes to narrow my available choices and finally end up with a listbox presenting the records filtered through cascading process. Now, I want to double-click on a record and load a new form with all this record's fields.
This is the code used to populate the listbox:
Private Sub FilterTypeList() Dim strRS As String ' Filter the list box appropriately based on the combo box selection(s) strRS = "SELECT qryTaxonomy.Type, qryTaxonomy.Article FROM qryTaxonomy"
[Code] ....
What is the code to open a form with the double-clicked record's fields, as described above?
In the past a Teacher would manually create a Form (Student Form) containing Student information, (Name, Gender, Birthdate, Homegroup) as well as additional issues on the student. This would all be saved into a table.
I would like to change this manual process of typing in individually to each text box, therefore, I have been able to run a report from a external program that obtains (Name, Gender, Birthdate, Homegroup). This saves as CSV and I am able to import into a separate table within the database. This works no problem.
What I have set-up is a form that contains a listbox this contains the Student name and Homegroup from the imported table contents. Again this works fine.
What i would like to do is when a student is selected from the listbox and dbl clicked on, how can i make information (Name, Gender, Birthdate, Homegroup) populate the textboxes in the Student form that the teacher previously used? could this be an update query where the imported table information will then go into the Student form? If so, how can I tell the dbl click of highlighted name is the data i want to populate?
I have a list of incidents in my Incidents Management Database. It comes up as a grid view when users open the database.
This is what it looks loke (paste the following into address bar of your browser. lh5.google.com.au/snehal.dabhi/R8oc22J_RfI/AAAAAAAABz0/bbIkCzg5whk/image001.png
I want particular incident to open in a form when users double click on any particular incident from the list above. For example double clicking on the first incident (dated 1/03/2008 in the list above) should open the form below with THAT PERTICULAR incident. And double clicking on 22nd incident should open the following form with 22nd incident loaded, so users can edit that incident
please Paste the following into your browser to see the image. lh6.google.com.au/snehal.dabhi/R8oc3GJ_RgI/AAAAAAAABz8/vGSjfr5rZ10/image003.png?imgmax=640
Any detailed help is much appreciated. – I am too new to understand macros and vba. Thanks!
I have a main Form "Client" that shows details such as Representatives, phone numbers, status, etc. I also have a main report "CRM" that is a nicer summarized table version of all of my Client form entries.
The "CRM" form will be used by others in my office to see what clients we are contacting, etc. What I want to be able to do is have someone open the CRM form first. If they want to see even more specific info (not everything is included in the report, as that would be too messy), I want them to be able to double click the Client's name on the report and be taking to the corresponding entry on the Client form that shows more details.
Right now my code for the Report which is not working is the following:
Private Sub Client_Name_DblClick()'double click on a client name in the reportDoCmd.OpenForm "Client", acNormal, , "[Client_Name]='" & [Client_Name]'this should open the Client Form to the record of the same client that was double clicked on the reportEnd Sub
Trying to pull information from a text box on double click to populate a combobox on another form...
keeps coming up "type mismatch"
I call lngAccount as recognised on mouseover... ("Business Account" is the value I want)
I can't get it to work!
For info, the form I'm calling from is a subform located FrmMainMenu/FrmAccountsMainMenu and the control source is [Account]
the form I wish to populate in on FrmTransactions (it is a main form only) and the combobox is cboaccountselect - **I've seen the obvious mistake with no reference to this whatsoever, corrected it, and still not working**
I have a form called GetdataFrm. Within it i have a combo box that filter a query. When the combo filters, it populates a continuous subform called GetDataQrysubform. GetDataQrysubform look like a table that contains this Jobcode information:
EmployeeID Jobcode CardAccess Folders Software
When I filter the GetDataFrm form, I want to be able to click on a Employee's EmployeeID number from a single record in GetDataQrysubform and then a form called SingleRefrm would pop up taking me to that record.So far I have a event procedure coded to open up SingleRefrm, when the EmployeeID field is clicked but its not working. The code looks like this:
I am new to access and I recently encountered a double click issue
My form loads perfectly on double click event but it shows the first record instead of selected record.
My search is based on a PersonID but each PersonID has different WorkID that I wish to display on double click but it always shows the first WorkID instead of my selected record
I have tried changing the filters in the form properties but it still doesn't work for me.
Here's my code:
Private Sub SearchResults_DblClick(Cancel As Integer) DoCmd.OpenForm "WorkForm", , , "[PersonID]=" & Me.[Searchresults], , acNormal End Sub
[Searchresults] draws information from my Query
Query information:
PersonID... WorkID... Type......Location 1234..........1............Paint .....Address A 1234..........2............Electric...Address B 1234..........3............Floor..... Address C
