Senario...
On one of my PC's at home I thought I would give Office 2007 a go. It ran so slow and bogged down that I un-installed it and re-installed Office XP
Now when opening a db with an image the attached error message appears. The Db opened OK previously, and works on my other PC's, so I presume it is an office installation error.
Any clues ?
Dave
Is it possible to have a cmdButton open a pre saved image from your hard drive. The images are saved with the same name as the Account Number. (ex: AcctNum -- TA123409 Image -- TA123409.bmp) I want the cmdButton to open the image filtered or based on the Account Number. If so, could someone show me a sample OnClick code. Thanks
View 7 Replies View RelatedI am new to VBA for access. I am working on a form as a user interface. I have added an picture to the form and it will change, according to the selection in the combobox. It looks small, and not clear because of the size, and each image has different size. I would like to know if there is a VBA code that will allow me to click on it, and then it will open in another window so it is bigger with the right sizes.
View 6 Replies View RelatedI am getting a Run-time error (2220)-Microsoft Office Access can't open the file (then state path) on a form when a user attmpts to add an image and "Cancels" out of the file dialog box. I do not have any problems if the user continues to add the image.
Any ideas, would be helpful
I have to create a database with more than ten thousand records. There is a field on which image by clicking the image to be displayed with the default program based on the image on which you clicked.
Code:
Private Sub Campo1_Click()
Dim L As Long
L = ShellExecute(0, "Open", """" & "C:UsersNickDesktopDocumentiPicturesDioDiego.jpg" & """", vbNullString, vbNullString, 1)
End Sub
When onClick event happens on the image is displayed the same image regardless of the record on which you clicked. How do I change the code to open the image of the field that was clicked?
Having experienced the bloating effect that many others have when embedding OLE pictures into Access, I decided to use a text field and hyperlink instead. I have an Unbound Imagebox on my form and populate using the codes below:-
Image.Visible = True
Image.Class = "Paint"
Image.OLETypeAllowed = acOLELinked
Image.SourceDoc = [Image File] ' This is my Hyperlink text field.
Image.Action = acOLECreateLink
This works fine after the first attempt but on the first attempt I get the following error -
"Run Time Error - 2786, The OLE Server doesn't support linking".
After this everything works fine, it's almost as if something needs initializing on the first go. I tried using Picture Box's instead but some of linked images have very long path names and they can't handle them (in true Access style) so I guess they must be an older control than the Image Box.
Any ideas anyone, this ones been troubling me for ages?
I have a form that I would like to update a picture on using VBA. The source of the picture path is in part a query that is not bound to the form. So far I have the following code that is pretty much working, but with a couple flaws.
Code:
Private Sub Form_Current()
LoadDefaultPicture
End Sub
Sub LoadDefaultPicture()
Dim db As DAO.Database
[Code] ....
This is working. However, when I change the record the picture flashes the current picture once and then loads the new picture. It is like it reloads the current picture then loads the new one. I'm hoping there is a way to get rid of the flash.
Also, the code fails here:
strDefaultPictureName = rs.Fields("AttachmentName")
When the query does not return a record. I can definitely fix this by adding an if statement to check for a record, but I'm kind of perplexed at why it is failing at that line. I would expect it to assign an empty string to that variable name and then fail on the next command where I try and set the ".Picture" property of the image.
Hi all ,
Can anyone tell me about how to embedd image in image control using imagelist.
I added the 5 images in imagelist at design time and added the following code.
image.picture=imagelist.listimages(1).picture
but iam getting error.error no :2110,cannot open the file .
thank u,
Siva
When I recently opened a Db I had been working on I received the attached Msg.
The path to the Db is C:Database ProjectsAEMSWarranties and Sales.mdb
Once OK is pressed the Db works fine.
I created a new Db and imported all objects, but no change.
Any ideas?
Dave
hi
i get the error "The database is already opened exclisively by another user" after running the following code. i ran the same code under the same conditions on my home pc and it worked fine.
Private Sub Command1_Click()
Dim dbs As Database
Dim qdf As QueryDef
Dim strSQL As String
Set dbs = CurrentDb
strSQL = "update Emp set Salary = 786+ val(text2)- val(text3) where EmpID = '& val(text1) &'"
Set qdf = dbs.CreateQueryDef("", strSQL)
End Sub
Hello all,
Can someone please help me with this run time error I am getting:
"Cannot open any more tables".
We have 2 big forms in our application. One has 6 tabs on it with many datasheets. This form works for a while when entering data. Then about a half-hour into the application, the drop down lists are blank for new data and the "cannot open any more tables" error occurs.
I have cut down the number of tabs from 8 to 6, and decreased the datasheets by 4.
The mdb went from 14 Megs to 9 Megs with some cleanup of obsolete VBA code and redundant GUI elements. I compacted and repaired the database using the menu Tools.
It helped some, but I still get this pesky error. Then the application is useless because there is no more data you can enter.
Is there anything I can do? Any suggestions or a Microsoft web site link someone can share?
Thank you,
Sal Magnotta
Hi all,
I have a form with a button on it, that when clicked it will open a subform on the same form. But, when I clicked this button, it gave me this error message:
The expression On Click you entered as the event property setting produced the following error: A problem occurred while [Database Name] was communicating with the OLE server or ActiveX Control
For more details on this error message, see the attached file.
Any attempt to help will be highly appreciated.
Sorry for bothering you.
Hi can anyone help me, im struggling to get my database connected to my site, it is connected to dreamweaver through ODBC but will not open, the problem i believe is in the lines of cole in bold. Any help would be much appreciated.
Dim adoCon, adoRec, adoRlt, dbname, adoConnectionString, dbRecordCount
dbname = Server.MapPath("Wortons_Notification_db.mdb")
adoConnectionString = "DRIVER={Microsoft Access Driver (*.mdb)};DBQ=" & dbname & ";DefaultDir=;"
Set adoCon = Server.CreateObject("ADODB.Connection")
Set adoRec = Server.CreateObject("ADODB.Recordset")
adoCon.Open adoConnectionString
adoRec.Open "Wortons_Notification_db", adoCon, adOpenStatic, adLockOptimistic, adCmdTable
This is the error type i get in my browser:
<LI>Error Type:
Microsoft OLE DB Provider for ODBC Drivers (0x80004005)
[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x814 Thread 0xa7c DBC 0x1191024 Jet'.
/Project_Wortons/Registration.asp, line 16
Thanks
I'm begin study Microsoft Access but have error and don't know how!
(Please see the attach picture)
I'm use Window XP Pro and Office 2003.
I'm already update window and Jet 4.0 Service Pack 8 (SP8) for Windows XP at link but nothing to change (http://www.microsoft.com/downloads/details.aspx?FamilyID=2deddec4-350e-4cd0-a12a-d7f70a153156&DisplayLang=en)
Please advise me the way to repair this error!!!
Can anyone provide assistance with the above error? It comes up when I try to open a report from my form. The form has 15 tabs and approximately 5 subforms on each tab, which I suspect is causing the problem.
I have found some help on the web, but I am not sure how to use it... http://www.mvps.org/access/bugs/bugs0010.htm ...Item number one describes my situation exactly, but I don't know where to set the "record source on click" for each tab. Any help would be greatly appreciated.
Thanks!
I got this message after I install the "SMTPSVG.DLL" that i got from http://www.serverobjects.com/comp/Aspmail3.htm
What should I do?
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x8d8 Thread 0x994 DBC 0x240303c Jet'.
Please help. When trying to launch MS Access 2000 I get an error: " Can't find the database you specified, or you didn't specify a database at all. Specify a valid database name in the command line, and include a path if necessary." When I try to open a valid Access file, the application simply doesn't display anything.Please help to fix the problem.
Thanks
Hi,
I am not able to open database in access2003 because of error 3197.
Everytime when trying to open ,the same message appears on the screen:
"The Microsoft Jet engine database stopped the process because you and another person are attempting to change the same data at the same time".
I have tried to import that file in the new database,but that doesn't work. Even when my copy the database on other machine, same error message come up. Some one suggested it might have to do with enabling the database for multiuser access but i can't even open the database.
Does anyone know how to open the database with error 3197?
Any help is appreciated.
Thanks,
Baba
This is the second database where this has happened to me. I have code to print a report (with several sub-reports) to PDF. When it prints, only the first couple reports appear. The rest of the pages on the PDF are blank. If I try manually saving to PDF (Save As > PDF or XPS), I get the error "Cannot open any more databases."
In the other case, my "solution" was to copy all the queries into temporary tables and use the temp tables as the datasources for the reports.
hi,
the following error message appears when trying to access my database. I can't seem to get into it at all, not even by trying to import the data tables over into a new database. the following message appears:
"The database has been converted from a prior version of Microsoft Access by using the DAO Compact Database method instead of Convert Database Command on the Tools Menu. This has left the database in a partially converted state. If you have a copy of the original format use the convert Database on the Tools menu to convert it. If the original database is no longer available, create a new database and import your tables and queries to preserve your data. Your other database applications can't be recorded''..
the copy and the back up wont let me in either, this just suddenly happened.
Please help!
Thanks in advance
The code below fails.
Code:
Dim ResultQy As String, qdf As QueryDef
Dim ResultFm As String
ResultQy = "ByFederationQy"
Dim strSQL As String 'sql statement to execute
[Code] ....
When I run the code it fails at the last line giving error message:
Code:
Runtime error 3061 - toofew parameters expected 1
I have a 2003 .mdb file and the associated Workgroup Information File which normally resides on a network in a folder V:V-Base-DatabaseDATA. I have the Workgroup Information File.
The database is unsupported and we need to migrate the data to a new web based database.
When I try to open the database with the shift key down I get the following message :
You do not have the necessary permission to use the V:V-Base-DatabaseDATAV-Basebe.mdb object.
What is the best way to access the data and do I need to do this on the server instead of a local drive off site?
Whenever I open the form 'TrainingF' I get the 'Enter Parameter Value' msg box. I tried to look online but could not get rid of it. I have attached the file.
View 6 Replies View RelatedWe have a new user who is unable to get into a database. Another user in the same office had no problems.
The other user is using:
"C:Program Files (x86)Microsoft OfficeOffice14MSACCESS.EXE" /wrkgrp"ServerNameShareNameSFTPSFTPWorkgroup.mdw" "C:SFTP Database V2.1 FESFTP Database V2.1 FE.mdb
The new user was not able to access the share at all using ServerNameShareNameSFTP until he changed the path to:
"C:Program Files (x86)Microsoft OfficeOffice14MSACCESS.EXE" /wrkgrp"ServerName.ACCT05.us.companyabbreviation.comSha reNameSFTPSFTPWorkgroup.mdw" "C:SFTP Database V2.1 FESFTP Database V2.1 FE.mdb"
Now he can get into the SFTP folder, but when he uses the shortcut, he gets an error stating Microsoft Access couldn't find the file ServerName.ACCT05.us.companyabbreviation.comSha reNameSFTPSFTPWorkgroup.mdw 1" "C:SFTP Database V2.1 FESFTP Database V2.1 FE.mdb" (Note the space and 1)
I created a new shortcut, and I was able to open the db using his target line, even though I can use the shorter one. For the new user, this still generates an error.
Hi guys,
I'm in desperate need of help and want to know if it is possible to load an image on a form once a hyper link is created.
For example, I have a form with a hyper link to an image created, currently, when you click on the hyperlink, it opens the picture in the browser, can you change it so that it loads teh image embedded into the form instead of loading it into a browser?
If so, how?
Thanks
I linked table rawdata from a database called competitor from a ODBC Database. I run a query with to make a table with a criteria where it retrieves roughly 10 columns with 719,000 rows. And it gives me this error.
(Cannot open database". It may not be a database that your application recognizes, or the file may be corrupt.
I asked the creator of the database and they said the database grows automatically and it was created with the same Access version as i am using to run the query.
Also when I do a RUN without creating a table and just selecting and displaying the data it does not give me any issues.