Hi,
I have made an application in access 2000. So what I have, 2 text fields and one button. I would like that when I click the button that access visits a site like this:
http://website.com/test.php?ID=5&NUM=23
where 5 and 23 are values from my fields in my form.
Any ideas.
regards
I'm tying to open a PDF file at a specific page using the Adobe hyperlink open syntax, ie,
Guidance.pdf#page=3
is set as a label hyperlink.
Unfortunately the document still opens on the first page.
If I type the path with #page=3 at the end into internet explorer, the document opens at the page specified.
Anyone have any idea's?:confused:
Thanks, Matt Turner
Hi.
I need help and I needed it fast.
I have a small access database which i want to creat a web front end for.
I have already created a Data access page and it works fine apart from one important thing. When I open the Data Access page it loads the first record on the list. As this page going to be Add only I dont want to view any record apart from adding. therefore when i open the page it should be new blank record, ready for input. i have looked everywhere but cant find a solution for it. pleeeeeeeeeeaaase help. i appreciate any help given. thanks:confused:
Hi.
I have put much time in designing a form.
After exiting and saving it, I cannot now open it. Only the Page Header shows, and I cannot get into 'Design' mode. I have tried repairing and compacting to no avail.
Any ideas?
Russ
I have a report which includes several subreports. There will be times when a subreport prints partially on one page and completes on the next. I don't always want to break to a new page with this subreport. However, I would want to break to a new page if the subreport cannot fully print on the current page.
View 3 Replies View RelatedI have a report that lists states and cities within the states. When a state name happens to be at the end of the page the individual cities appear on the next page with no State heading. I solved the second page problem by setting the "repeatSection = Yes" in the Section Header (though I haven't shown that in the example below).
But the previous page (which just shows the State Name and no cities looks dumb. Is there some sort of solution.??
(Actually I would also like any State that continues to a next page to not just have the state name but something like
" Colorado (Continued)" Is there anything I can do in VB to make a page break if the section is going to print but therer isn't enough room for one detail line?
This is what I currently see
Alaska
Ancorage
Prudo Bay
California
Whittier
Anaheim
Colorado
------------------------Page Break ---------------------------------
Denver
Pueblo
Colorado Springs
Deleware
Dover
-------------------------------------------------------------------------------------------
Thanks !
If I have a report and it has controls (labels representing column titles) in the page header. Now when I print the report - if it happens that the last page has no detail records - but there is text boxes and so forth in the report footer. Is there a way to not display the page header on the last page?
I have a report where the last page shows the page header - and the field/column labels on the page header - but for which there is no detail records left to display - on the last page. There is report footer information that should display. It just looks weird because the field/column labels show at the top of the page - but there is no data remaining to print under them on that last page.
Hi All,
I have a data access page needs a filter by a dropdownlist, the dropdownlist used is a html control and I use javascript to filter the data programmaticlly in the onchanged event of the control.
MSODSC.DataPages(0).Recordset.Filter="AppID = 3";
My problem is, when this statement runs, the page refreshes. But I don't need the page refreshes, it set the dropdownlist text to the default text, not the value user select. The browser is IE7.
How can I stop the page refresh itself?
Thanks and Happy New Year!!
I have one-page forms which print a second page, blank except for a block of grey shading at the top. I have tried moving the content of the form up but that doesn't eliminate the second page. If I look at print preview, every second page of the entire database shows up as blank, regardless of where that happens to appear in the record.
View 2 Replies View RelatedI have a report that should only show 1 page yet I have 2 and one is blank . I cannot find out why?
View 3 Replies View RelatedI am trying to create an invoice report. I want to add all the costs from the detail section in my footer. I have accomplished this in either the Report footer and/or the page footer, but the problem is that the report footer doesn't go to the bottom of the page, and the page footer doesn't go to just the last page. I have tested a bunch of suggestions that don't seem to work.
1. Print page footer with Report header = NO - only works if your report is two pages or more.
2. Private Sub PageFooterSection_Format(Cancel As Integer, FormatCount As Integer)
If Page = Pages Then
Me.[TextBoxName].Visible = True
Else
Me.[TextBoxName].Visible = False
End If
End Sub
The Page functions worked, but it did not change the results from page to page. If it was a two page report, then the if statement is false and the text box was not visible on page 1, but it also was not visible on page 2.
to automatically create a second, third, fourth... page depending on how many characters are in the narrative. The only other thing needed to be changed is the page# of Page#.
So right now my form looks like below
CAD#
Person name
Charge
Narrative
"
"
"
"
"
"
"
"
"
"
"
"
"
Officer name date page # of #
Thanks in advance.
Matt
Hi All
I have added the Allen Browne Calendar 2k control to my form.
My form consists of 4 pages. On pages 2 and 3 I have subforms and on page 4 I have Personal data. Page 1 is general data and the Calendar is on Page 1.
What is happening is that the Calendar is also being displayed on my 4th page, in the same position as page 1. When I try to move it, cover it or delete it from page 4, it is also gone from page 1.
Any suggestions please?
Many thanks
Tee :(
I've used the following code on the footer on print procedure:
Private Sub PageFooterSection_Print(Cancel As Integer, PrintCount As Integer)
Me.PageFooterSection.Visible = (Me.[Page] = 1)
End Sub
This works fine when you view it in print preview, but the footer don't show up at all when you actually print it.The reports default view itself is set print preview.
I have made a report on my query. The page setup is all around merging 0.2" and page size A4
When i view this report in preview it looks all my data whatever i want in a page but after every page it will generate a blank page.
I have included my report.
I have a Form opening from Access Options. I would like to close this Form using the Timer. The following is the code I have used but it is not working.
Private Sub Cover_Page_Form_Load()
OpenTimer = Timer
End Sub
Private Sub Cover_Page_Form_Timer()
If (Timer - OpenTime) = 5 Then DoCmd.Close acForm, "Cover_Page_Form", acSaveYes
End Sub
Next question. If I can get this to work can I then use a DoCmd to open new Form within the code above or do I need a new process.
I have a form with six tabbed pages on it. Since data entry follows in a logical order I would like to put a command button on the bottom of each page (subform) that can be used to go to the next page. What I am going to though? If i put a command button (open form) then it opens the whole form not as a subform on a tabbed page. if I try and put a command button (open page) then it will not let me enter the page number. Hope that makes sense! Any ideas
View 3 Replies View RelatedI am trying to create a report that has the dates go accross the page and not down the page .
Example:
Need:
Jan 2014 Feb 2014 March 2014
Ans so on. I will also need datat under each date.
I am having issues with the reports to give me the output that I need.
Hi All,
Is there a way that when the user clicks on a database file, the form pops up without opening MS Access window.
Thx,
Jatz
Hi All,
Is there a way that when the user clicks on a database file, the form pops up without opening MS Access window.
Thx,
Jatz
I have seen large projects in which there are clearly several printed database reports printed out to make one booklet.
1. How does one get page numbers for multiple reports to go in sequence instead of starting over again at 1 for each report.
2. How can you add a page reference in one report to something in another report?
Do you have to do these things by hand or is there a way to create a something with auto numbering capabilities? Do you do it by importing the reports to MS Word and creating a master document?
I am very close to completing a DB Program.... How can I create a desktop Icon that will Launch my Program without Loading Microsoft Access along with it???
View 6 Replies View RelatedHi, I have designing an internal works database to hold projects. My question is this; I want to display data on a web page, for example to list the projects directly from the database tables (so other people can view the projects that are outstanding).
Does anyway know where I can find an example of this or do you know of a website that shows you a walkthrough on how to do this.
Thanks.
I made a couple of reports.But when I want to view or print them,default page set up is for Portrait,I want Landscape.Each time I open database i have to go to Page set up and change it .Is there a properties where I can change it pernamently??
View 1 Replies View RelatedHi
Does anyone know a basic and quick way to write to a table in a database using a web page instead of a form? the webpage is stored locally as is the database
Thanks
Ben
hi
have a page with all my main fields, now i would like to create a sub form and put some of these fields on it.
i tried copy and pasting but a few of the scripts show errors.
im not sure hoe i can transfer exsisting fields onto a subform,
im guessing ive done this the wrong way round should have designed a sub form and then put the fields on