New to Access - I have a database which currently has 200 records. When I run a query or report it's the 150th Record which comes up first. I do get all the information but would like to know how I set it up that it's the 1st record which is taken first and then so on.....
View RepliesI know this is a simple question. I searched but could not find what I was looking for. Or it is handled in differently than what I am thinking.
I have a field where I enter a dollar amount. But if I do not enter a dollar amount the field displays $0.00. How can I make this field blank if no dollar amount is entered.
Thanks
For any help I can get
Hi everyone. I need help on this one
I have a form with a subform. The subform is basically the sale history of the item on the main form (The main form shows a record and then the subform reports its history). This all works fantastic, except that on the subform, every time a new record is entered, it goes to the bottom of the previous one, so after a while, if I want to enter more history into the subform, I have to scroll down through all the older ones to get to the more recent ones.
How can I do it so that in the subform the most recent entry is always at the top and each time a new record is entered, the older ones move down one. This way the most recent records are always on display and older ones move down as they become less important. Likewise, the empty record used to enter data is also at the top!
Thanks!!
how to get some information to show up in chronological order.
For example,
It is showing up like this..
Week 1
Week 10
Week 2
Week 20
Week 3
Week 4
and so on
I want it like week 1
week 2
week 3
week 4
week 10
week 20
Whenever I use a look up field to enter values, I get the ID number displayed instead of the value (name). How do I rectify this error.
View 2 Replies View RelatedHi,
I have a order system which allows customers to place items on. When an item is selected and a quantity has been entered and add button is selected, this adds the item into a listbox with all the details.
Each item that is selected a quantity is selected, this would then work out a total price and this total would be displayd within the list box too.
i want to add all the totals up for that order and have it displayed within a text box.
for example:
product ID, Name, quantiy, item price, totalcost
P0001 Top 5 1.00 5.00
P0002 Top 4 2.00 8.00
P0003 Top 3 1.00 3.00
i then have a text box where i want to display the overall total for these items within. hope this helps. im really stuck on this one!!!
Hello,
I have a querie that calculates the average of two sets of times taken from a calculated figure in a table.
My problem is that the returned value seen when the querie is ran needs to be of a clock format. Eg 0.75 needs to read as 0:45
I have attached a Database to help, as i am unable to do this.
Any suggestions given i am greatful for.
I'm sure this is simple and I'm just missing something...
I have a combo with two columns and the row source set up as a query which returns two columns.
When I click the drop-down arrow for the combo box, I get exactly what I expect.
What I want to do is initialize the combo box so that the "default" selection is displayed in the "text" or "value" section of the box. I also want to be able to update this when the user makes a selection.
I have no problems when using a list box with something like:
listbox.value = <Some Index in the listbox>
With the combo box, I've tried:
combobox.text = xxx
combobox.value = xxx
combobox.column = xxx
combobox.itemdata = xxx
combobox.listindex = xxx
The value property sort of works -- It displays the data from the first column right justified in the "text" section of the combo box. I need to have both columns displayed the way they are when the combobox is dropped down.
Any thoughts?
Thanks in advance...
Hi,
I am trying to choose an entry from a COmbo Box which ahas a Lookuop underlying in it. I then want to display the additonal four entries in the form it self. The data is already created and displayed in a query. The primary key gets displayed but thte other data cannot be displayed. Is there any way I can display the other details eg: Firstname, Surname Age in the same form but under different fieldnames. I am not sure how to do this.
I could retype it all in but that is uneconomical. Any ideas? Please help.
Thanks.
When I view data in linked tables in MS Access containing foreign characters (umlauts, accents, etc), the foreign characters are not being displayed properly. It is not a font or Access setting because I am using a separate similar database (also containing linked tables) where the foreign characters are being properly displayed.
Is there a setting I'm missing in the linking of the tables? Not sure where else to check.
I have successfully used an Expr code in my query to get the calculated result that I need. My problem is I can't seem to display the results on a form. I get the error "Name?"
When I try to find the query on data control which I used, it does nothing but shows me the fields from my table. How can I get a query expr column to display in my form?
the name of the query is "together" and the column's name is "everyone"
Can someone please point me in the right direction
i want to make it equal to my forms adjusted width but i don't know how to do that. Also i thought it would look like a form enwrapped within a rectangle or a square yet its gluded onto Access with no border
View 2 Replies View RelatedI have two tables, [ATWelding] and [Results] . They are linked as they both have Weld ID.I want query to show any ATWeld ID that doesnt match a Weld ID in [Results].I can't use SQL as my database is on the web compatible platform. I attempted to do this using InStr([Results]![Weld ID]) in my Weld ID ATWelding criteria on a query but as I am using the web version an error message saying the expression is not compatible with the web is being displayed. I can run the query in my web database?
View 2 Replies View RelatedI have a problem when I want to create an "ORDER" form, that will allow user to enter more than one order.
I have no clue how to do it.
Hello,
I'm trying to limit the number of text characters displayed in various fields on a form. I want it to appear so that after a certain number of characters it then displayed "..." indicating there is now information in a field.
Thanks for any help!
Hi I'm a teacher and have to set targets for classes, I have created a database which allows me to input targets for the classes. I now need to then display the class target for individual pupils in a new layout. I am sure there is an easy solution and I am looking at the problem from the wrong direction. Thank you for any help
graham
I have a query that looks through a table and shows me any calls that have a status of either 'O' 'or 'C'. What I would like to have in the query result is the O or C replaced with the words Open or Closed. Then when my count will make alot more sense rather than having O 29 etc.
I have had a look through the forums on the net and I am convinced this question has been asked before, but I am struggling to find the key word to search for
Kindest Regards
I have a continuous form based on a query with the criteria as all records where a certain field is null. From this form, the user can fill in values for the null field. I then want to click a button on the first form to open another continuous form showing the same records so the user can go on to do something else. The problem I have though, is that if I base the second form on the same query as the first form, any records where the user has filled in a value for the previously empty field will now not be included in the query results. Is there a simple way of doing this?
View 2 Replies View RelatedHello again my forum o' saviours, Current filter: WHERE (Assignments.[AcademicYear]) Like ([Please Enter Academic Year])AcademicYear is a field in the Assignments table (duh). In this same query, I have a couple fields (equations and if/thens built on the assignments table) that will need to be used as further filters. I thought something like WHERE ((Assignments.[AcademicYear]) Like ([Please Enter Academic Year]) )& (len([groupwinterbox])+len([groupspringbox])+len([groupfallbox]) > 3) would work, but I keep getting pop-ups asking what the values of the three query-based calculations are. Where did this noob screw up?
View 9 Replies View RelatedSome of my collegues have been experiencing this problem with a very simple database i knocked up for them. First off some background. I have a main form (frmproperty) with 3 subforms linked to it(frmroomdata, frmlocation and frmsample). by a property code. Two of these subforms are linked (frmlocation and frmsample) these are linked by location code which is an autonumber.
These are laid out so that you fill in room data first, then location data then finally sample data. However after the location data has been filled out and a user attempts to move to the first combobox on the sample subform a message pops up saying that another user has altered the database and would you like to save changes (Impossible as they are using the database on a local drive). After this happens they reopen the form and in all the frmsample fields is "#deleted"
This doesn't happen every time...infact over the last 2 days i have been entering data myself to try and get this error with no luck. Has anyone else come across this and know how to fix it?
Thanks in advance
Matt Collins
Hello,
I'm new at this, but here goes. I have a memobox on a form that I set the DefaultValue to display instructions for what to enter in the memobox. I would like these instructions to be visible until the user clicks or tabs into the box. Then I would like these instructions to disappear when the user begins to type something in. I've tried using several different event scenarios, but none does exactly what I want. I don't want to use a control tip as it won't appear until the user actually enters the memobox and I want the instructions to be visible before that time. However, this is what I've done at this point because I haven't been able to fiqure out how else to do what I want to do.
Any help would be appreciated; I'm sure this is something very simple for all of you, but I've spent several hours trying to work my way through this.
Thanks, Charlotte
P.S. I've read many of the posts, and have gathered many helpful tips on a variety of Access topics. Thanks to all of you out there!
So...I have a table with 2 fields: Name and Times Accessed
I have three names in the table: Shane, Bill, Chris
There are multiple entries for each name with no primary key set.
The Times accessed are as follows:
Shane 2
Bill 2
Chris 1
Bill 3
Shane 5
This is what I want to do if possible:
I will have multiple text boxes on the form that will display running totals for different people in a table.
So i have three text boxes on the form. 1 for each name. i want that textbox that corresponds to each name to keep the running total for Times accessed. So, for Shane it would be 7, bill would be 5, and chris would be 1.
How/where do I do this? need more info?
Thanks...
Shane
I have a form with loads of calculated textboxes (using expressions).
Some of these also rely on other textboxes that are being calculated when the form loads.
If I load it once, some of the textboxes display #Error! but most don't.
On closing it and reloading it a second time, the textboxes that displayed #Error! the first time now display a correct value and some other textboxes display #Error! instead.
Occasionally, every control works perfectly.
Is this something to do with when the calculation on each control is run and that if the dependent calculations don't finish quickly enough?
If so, is there a way round it?
I saved my form with a particular name and I have used that name all throughout my code and it still works fine. But when I open that form, the name I see on the top of the form is not that name at all. It's actually some value I gave a combo box a while ago.
View 2 Replies View RelatedI have a combobox which lets you select from a list of pseudonyms. Each pseud belongs to an author; authors can have multiple pseudonyms and exactly one main pseudonym. This is the table structure (picture of relationships attached below):
Code:
tblStory: StoryID (PK), AuthorID (FK), Title, etc.
tblAuthor: AuthorID (composite PK, autonumber), MainPseudID (composite PK)
tblPseud: PseudID (PK, autonumber), Pseud, AuthorID (FK)
The combobox list shows all the pseudonyms and then stores the corresponding AuthorID. At the moment, the pseudonym displayed in the combobox (once a selection has been made) is simply the first alphabetically for that particular author: for instance, if a story has AuthorID = 5, and Author 5 goes by anon, anonymous, and unknown, the combobox for that story will display "anon".
How can I make the main pseudonym (tblAuthor.MainPseudID = tblPseud.PseudID) be displayed instead?
Control source is tblStory.AuthorID
Row source:
Code:
SELECT tblPseud.AuthorID, tblPseud.Pseud, tblAuthor.MainPseudID
FROM (tblAuthor LEFT JOIN tblPseud ON tblAuthor.AuthorID = tblPseud.AuthorID)
LEFT JOIN tblStory ON tblAuthor.AuthorID = tblStory.AuthorID
ORDER BY tblPseud.Pseud;
im working on a report at the moment that will generate a standard NIP (nutritional information panel, similar to whats on the back of pretty much all packaged food products, see link below for an example)
[URL]
this in itself is pretty easy, however depending on which market we're selling to, different countries have different requirements for which data is to be shown, ie some markets might require we show how much sodium but not how much fiber, others might require us to show how much carbs and sugars but not how much vitamin C and so on (all up there are 16 different variables for nutritional info, due to size requirements on our packaging we cant simply display all 16 all the time)
at the moment im designing a form which has a drop down box (for the user to select a product) and checkboxes for each of the 16 variables (kilojules, carbs, iron, trans fats, sat fats, etc) following this ive got a report that has all 16 variables on it
i can make the variables that arent ticked on the form invisible (by adding a bunch of IF or Case statements, on print of the report, that determine whether the corresponding checkbox for each variable has been ticked and setting the "visible" attribute to true or false accordingly), however when they are invisible there is still a blank space where the field is meant to be ive got all the fields grouped together, is there any way of making fields invisible and then pushing all the visible fields together so there are no blank spaces?