I am developing a database that requires the entry of multiple levels of corporate structure and would like to be able to show that structure using an org chart.
I know you can create org charts within Word, Excel or Powerpoint, but does anyone have any suggestions on how this might be accomplished using Access? I have searched the web pretty thoroughly and haven't come up with any answers yet.
I am not necessarily apposed to using an additional software package either, but I need to be able to supply it with variables from within Access and have it produce the desired result.
Any help or suggestions would be greatly appreciated.
I'm trying to create a chart in a form, this is not a problem, however, the chart types available are a bit limited compared to if i inserted a Microsoft Excel Chart object.
I'd do that except I'm trying to create a chart based on a query.
Is there a way to make the chart wizard use the Microsoft Excel Chart object as its chart creator so I have access to the chart types available in that object?
I have a form with a chart , 2 textboxes for start date and end date and a button to filter the data( filter the data by date range) How do i continue from that? The chart isnt updating.
I am trying to create the Excel chart see attachments (ExcelChart.jpg) in MS Access but I don't think it's possible with the Access Wizard because it doesn't allow me to use more than one data field (step 2 in the Chart Wizard)
I created the Excel Chart using a pivot table in Excel with two data fields and they are graphed simultaneously
For the Access Chart I only managed to get the "Total Delay Series" and not the "Arrival Delay Series."
Must I use Excel to make this complex chart and link it to my Access form and if so can the chart still be dynamic? My intention is to set parameters using combo boxes and then create the chart on the fly. For example currently the user sees the series for the years 2004- 2008. I want to enable the user to be to have a choice about what years (range) they want to view.
i have two charts in ms access and i want to combine these two charts in one chart. do you know how i can have two y-axis in ms access charts with two fields for data area.
I am trying to create a chart in Access but havent done it before.
1). I have the following data:
Code CountOfType Month
Q 3 3/1/2012
K 1 2/1/2012
CDSA 1 2/1/2012
[code]....
2). I dont to create a chart where I am showing the transaction count (countoftype) in the Y axis and the code and bill_date in the Y. I want the chart to show the transaction by code and show what month it occurred. Would this be a crosstab query?
I have a query that Counts the number of times a model number is used. I use totals and the count function under total to get that count. I have the top 10 models used and the query returns my information correctly but. When I make a form or report and place a chart in that uses this query, the results are in alphabetical order not in the order of usage. I need my chart to either go from descending or ascending order of usage and not by alphabetical order of the model number or name. What am I doing incorrectly? It seems like the chart would display the same way my datasheet would in the query.
Here is my sql statement.
SELECT TOP 10 Count(tbl_Closed_Jobs.OEM_Model) AS CountOfOEM_Model, [OEM] & " " & [Desc] AS Expr1, tbl_Closed_Jobs.Desc FROM tbl_Closed_Jobs GROUP BY [OEM] & " " & [Desc], tbl_Closed_Jobs.Desc, tbl_Closed_Jobs.OEM_Model, tbl_Closed_Jobs.OEM, tbl_Closed_Jobs.Plant ORDER BY Count(tbl_Closed_Jobs.OEM_Model) DESC;
I can not get a line graph inserted into a report by using the Wizard. I have 2 columns of paired data that I want to graph. I dragged the 2 columns to the "Data" control in the wizard and changed summarizing for both columns from "sum" to "none".
When I look at the report in Print Preview, the data points are stacked vertically in the center of the graph and the "Series" box displays what looks like the data. If I add a Date/Time column as the X-axis, I am told that I have to summarize the data, something I don't want to do.
I've made various selections using the wizard and all fail.
I am working in Access 2010, trying to create a report with a pie chart. The pie chart is based on a query (called Count Pie) that calculates three values:
% IS % NetInf % IS + NetInf
I go into Create, Report Design and get a blank report in Design View. I select Chart from the Controls tab and follow the Wizard to specify the data source.
I get a pie chart with the right title (Count Pie). I double-click on the chart to open the report Datasheet and insert the correct value names. My pie chart in Design View looks correct. It has the right title and legend, and shows three slices of the pie corresponding to the three values.
I save the report, and go to Print Preview, where I get a pie chart that looks like a single circle; it has no legend, and doesn't show the three values.
Do I need to have the Access 2010 application re-installed?
I need to display the out put of a table as chart in ms access 2007. My table is as below.
ItemID Week 1 Value Week 2 Value
1001 87 5
1002 80 1
1003 42 1
1004 55 164
In the chart X co ordinate should be the "ItemID" and the Y co ordinate should be the week number (eg, week1, week2 ...etc). Is it possible to display the chart with the above table? Or do I need to transform the table and then dosplay as chart? Also can I transform the above table as shown below using a single Transform query ?
1.) pink arrow // I've changed the titel in a diagram with vba ... is there also a methode to move the position of the titel with vba ( left-center or rigth ? )
2.) red arrow // maybe its because of the titel placement.I would like to change the size of a diagram with VBA code to have the diagram fit nicely to a given space best thing would be if there would be a possibility to resize the diagram in the given space
I would like the user to be able to select the months he wishes in case they want to look at calender year, financial year or just a custom group of months. If I use the wizard and pick dates say the start and end of the year I get the following code in the row source of the chart control:
Code: SELECT (Format([DatePaid],"MMM 'YY")),Sum([TotalPaid]) AS [SumOfTotalPaid] FROM [Q_AllCust_Gross] WHERE ([DatePaid] BETWEEN #01/01/12# AND #31/12/13#) GROUP BY (Year([DatePaid])*12 + Month([DatePaid])-1),(Format([DatePaid],"MMM 'YY"));
So I decided all I needed to do was replace the dates in the above code with my own global varible which i would pass custom dates into via a form. Which I called getds() and getde()
Code: SELECT (Format([DatePaid],"MMM 'YY")),Sum([TotalPaid]) AS [SumOfTotalPaid] FROM [Q_AllCust_Gross] WHERE ([DatePaid] BETWEEN >=#getds()# And <=#getde()# ) GROUP BY (Year([DatePaid])*12 + Month([DatePaid])-1),(Format([DatePaid],"MMM 'YY"));
I've written this code in Access to create a pivot chart in Excel. All the code listed is good except for the last line. The last line creates another instance of Excel. I can't figure out what the correct syntax is.
Set xlApp = New Excel.Application xlApp.Visible = True Set wb1 = xlApp.Workbooks.Open("c:chi estpivot.xlsx" wb1.Sheets.Add wb1.PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _
I have created a chart report, but for some reasons, it only shows Sample data (East, West, North, 1st Qtr, 2nd Qtr, 3th Qtr, 4th Qtr etc). It is in Design View. If I do Print Preview, it looks fine.
How to have the Chart properly displayed in Design View?
I know how to create a chart in an access report, put it in the group header or footer and link it such that the the grouping filters the chart.
My VP wants me to create a chart that compares each invididual providers episiotomy rate (something that is done to pregnant women during delivery) to the overall divisional rate on a monthly basis.
I know how to do this with 2 charts, ie 2 different group levels. One chart goes in the date grouping level (the overall rate) and another goes in the provider grouping level (the individual provide rate).
is there a way to have this in one graph in an access report?
I have a pivot chart based on a crosstab query. I would like the items on the category axis (x-axis) to appear left to right in the order that they appear in the query results.
Some specifics: Tables: tblFreq FreqID (PK, Number, Range 1-7) Frequency (text)
tblResp RespID (PK,Number, Range 1-5) Response (text)
tblResults ResultID (PK,AN) FreqID_FK RespID_FK
Query: TRANSFORM CInt(Nz(Count(tblResults.ResultID),0)) AS CountOfResultID SELECT tblFreq.Frequency FROM tblResp INNER JOIN (tblFreq INNER JOIN tblResults ON tblFreq.FreqID = tblResults.FreqID_FK) ON tblResp.RespID = tblResults.RespID_FK GROUP BY tblFreq.Frequency, tblFreq.FreqID, tblFreq.FreqID ORDER BY tblFreq.FreqID PIVOT tblResp.Response;
[code]...
Which I suppose is alphabetically ordered.I am unable to use OrderBy in the forms property sheet because tblFreq.FreqID is not an available field, even though it's an expression in the query.
I've got a simple dataset that will ALWAYS have 4 rows, against which I have assigned the colours Green, Amber, Red, Grey. So I made a simple pie-chart to go on the report, but I can't work out how to assign the same colours.
Please see 3 attachments showing the current layout, the preferred layout (which I mocked up in Excel) and the chart settings screen.
The chart is working OK i.e. 4 slices appear and they are the right size, but when I open the chart, I see only East, West, North. So I am unable to manually set the colour for the 4th slice.
I have a simple line chart plotting price against date.
I would like to plot a secondary line on this chart from an array of data that I calculate. I've searched hi and low but can't seem to find a way of doing this.
The closest I've found is from this:-
[URL]
I can create my array of data but I can't seem to get it to work and think it may be for pivot charts....which access 2013 can't do anymore.
how to plot multiple data sets on the same graph in Access 2013.
I have a stack bar chart that shows hours an event took including delays so its 3 stacked bars. I want to add a goal or target line to the chart but can't seem to keep the bars stack because I have to change the chart type. Any ideas ??
I have a report that is populating from one query. It takes data for a year and groups it by month with the lost time for that month. I am comparing 3 years data 20005, 2006, and 2007. I have set the chart up and it looks good except that my time for each month goes into the data area as a "CountOf" lost time and all months are therefore one. I want to show the lost time for each month. I have tried right clicking on the field in the data area and Autocalc is set to Count, but everything else is grayed out and unavailable. How can I change this setting to just display the value? Thanks in advance for the help.
I know that the wizard wont allow me to put in more than six fields in the chart. Is there any way that I can get around this???
PivotChart: if i have a field named "Jan", when i put it in the pivot chart or table as a sum, it changes the name to Sum_Of_Jan. Is there any way that i can change this?? thank you.
