I looked thru the forums and didn't seems to get what I needed;
I want a count query to give me all fields in "group by" column, and assign 0 to where there are no count for certain fields.
I tried to set Outputallfield to "yes" but got an error message saying that there is a data type mismatch. The query ran just fine when outputallfield was set "no" and gave right results.
Can anyone help, please?
If one of the fields are 0 then it returns this error on my Reports in the Field and/or in the Sum of these. I read somwhere to create a tblDivByZero table but since I'm a novice I still can't make this work.
How to Elimate #Div/0! Errors in MS Access Reports
I have a totalquery that runs fine and give me the sum for both fields I'm looking for but I can't get the outputs to fill the fields on the form. I have tried the Dcount query in the control source but that just returns an error and locks up access.
Code:
SELECT [Tble-wcDelays].Causedby, Sum([Tble-wcDelays].HoursDelay) AS SumOfHoursDelay
FROM [Tble-wcDelays]
GROUP BY [Tble-wcDelays].Causedby, [Tble-wcDelays].LinkingID
HAVING ((([Tble-wcDelays].LinkingID)=[Forms]![Frm-ePlusCent]![cleanID]));
That is the query.
Hi,
I have a webpage which shows some results upon executing some SQL statements. However, i will met with some problems when the SQL statements return a NULL value therefore i would like to do some error checking such that when the SQL statement returns NULL, i will direct the user to another page.
Is it possible for me to try sth such as:
if strSQL = SELECT .. FROM .. WHERE .. = NULL then
response redirect ...
Was wondering if anybody would be able to give me some advise.
Thank you.
VBA creating and have spent about 4 hours trying to figure out the error with my simple loop to update a few fields. As you can see from the attached picture, the "Recalc" sub simply stops updating partway through the loop.
View 4 Replies View RelatedI'm creating an item look-up form with 2 criteria that I wan't to auto-filter as the user types. I'm placing my code in the Change event of the textbox, and only calling the .text for the current textbox (.value or no property at all for the other). The filter works smoothly and as intended until it returns no results in my table, and then it pops me with the error. I've tried forcing focus to the textbox in different places throughout the code, but to no avail. If I use the .value or no property for the current textbox, I'm not getting the CURRENT text, but the old text before it was changed, so the filter doesn't work properly.
Private Sub txtVendor_Change()
Me.FilterOn = True
Me.Filter = _
"((strSearchVendor Like '*" & Me.txtVendor.Text & "*' AND strSearchItem LIKE '*" & Me.txtPartNum & "*'))"
Me.txtVendor.SelStart = Len(Me.txtVendor.Text)
End Sub
It usually pops the error on the last line "Len(Me.txtVendor.Text)", but I've had it do it on the Me.Filter line as well (only when debugging and messing with next statement placement).
On a form I have the following field:
Name: PaymentsMade
Control Source: =DLookUp("SumOfPrePaymentValue","qryInvoicePrepaym entSum","InvoiceId = " & [InvoiceId])
In the form's footer I have the unbound text control:
Name: SumOfPaymentsMade
Control Source: =Sum([PaymentsMade])
SumOfPaymentsMade returns #Error
How do I get it to return the sum of PaymentsMade?
Access 2007. I can run the report for last month and with the VBA code outputting it directly to PDF and it works. When I run it for this month, I get an error 2501. This report has been running for months with no issues. When I run it for this month and preview the output, I can export it to PDF with no problems. Why can't I get it to work in VBA for this month?
View 14 Replies View RelatedI had looked at the Shell() function but I don't see it doing anything such as input and output.
Does anyone know the use of the VBA's command line that would send an input and receive an output to the VBA's variable?
I know I am being particularly stupid, but I can't work out how to do the following:
I have a table in which is recorded information about orders for customers. These fields are for orders of meat and poultry. As customers may wish to order more than one Turkey, I have created three fields called Turkey, Turkey 2, and Turkey 3. The data that is input is the weight of the Turkey e.g. 22 (lbs), 16 (lbs).
When it comes to ordering the turkeys, I need to produce a report which shows, by weight, the number of turkeys needed. This will need to add the number of turkeys in each of the 3 fields and order them by weight.
I've just got lost, trying to work out whether I base my report on the table or on a query based on the table. Help!!!
It has been a while since I last used Access, recently I've used mySQL and PHP.
First a little description of what I'm trying to accomplish:
I have three tables...
tblImport - has the fields: TestID(PK), i001, i002, i003, i004 ... i025
Note: i00# field contains the multiple choice answer (i.e. 1,2,3,4,5) as imported from a CSV file.
tblStudentAsr - has the fields TestID(PK), StudentID(PK), 001, 002, 003 ... 025.
Note: 00# containes the multiple choice answer (i.e. 1,2,3,4,5) as enterd by the student.
tblResult - TestID(PK), StudentID(PK), a001,a002, a003 ... a025.
Note: the fields a00# have the datatype set to "yes/no"
What I'm trying to do is compare the answers in tblImport to the answers in tblStudentAsr then output the result to tblResult .
Here is some dirty pseudocode:
if i001 = 001 then
INSERT 1 INTO tblResult
else
INSERT 0 INTO tblResult
The above example gets a little repetitive since I would have to do that for each question.
Is it possible to put the answer fields of each table into a recordset then compare them?
(I have heard that using rs's can be a little slow. Although there is only a max of 25 questions the number of students can be quite large)
Alternativly, can I accomplish this using only SQL statements?
What would be the best way to attack this?
Any suggestions (or alternate suggestions) would be greatly appreciated.
Thanks,
salmonman
Hi Have scoured the forum and have found people with a similar problem, but I just can't seem to get my head round this.
Basically I have a table with various fields, one of these fields is a sign off field where the user enters their name once the record has been reviewed.
I want to count all the records that do not have a name entered in this particular field thus are null/blank. I then want this figure to appear on a form thus representing the total number of records still to be reviewed.
I have tried doing this with various methods with no joy.
Any help would be much appreciated.
I have a routine that outputs an MS Access report as a pdf file which works OK. It does not open the file which is what I want.
DoCmd.OutputTo acReport, "rptTransactionInvoiceExcVAT", acFormatPDF, "C:UsersJEFF1Documents
ptTransactionInvoiceExc VAT.pdf", False
What I would like to do is output the pdf file with a Customer name and number from the field Me.txtAmazonBuyer. I have tried:
DoCmd.OutputTo acReport, "rptTransactionInvoiceExcVAT", acFormatPDF, "C:UsersJEFF1Documents" + ([Me.txtAmazonBuyer]) + ".pdf", False
But no joy.
I have been using Access 2013 to make a database which outputs values to PowerPoint.
I have two tables with data in which are both brought together in a query which is the recordset my VBA code relates to to output it to Powerpoint. Both tables contain data in 'long text' fields. The data from one outputs into PowerPoint textboxes without any issues regardless of the length of the data but the data from the other one is truncated to 255 characters. It definitely says it is a 'long text' field - is there any reason it would truncate the output?
The following query never returns, even though there is an index on the name field in the Patient table:
SELECT p.Name FROM sheet4 AS s INNER JOIN Patient AS p ON p.NAME LIKE s.LASTNAME + ', ' + s.FIRSTNAME + ' %'
Obvious neophyte issue here, sorry...
I have a table, PURCHASE_ITEMS with 3 fields: ID, TYPE, NAME
Another table, ITEM_TYPES with 2 fields: ID, TYPE
TYPE in both tables is a text field and there is a one-to-many relationship between them.
When I run a query on PURCHASE_ITEMS, I can see all 25 records. When I set a criteria for TYPE to one of the types, no records appear, even though there are 5 or 6 of that type.
Can anyone help me with this absurdly simple problem that I can't seem to get my brain around?
I am creating a database for a hyperthetical car hire company. A customer hires a car from and until a certain date. If a new customer decides to hire a car i want to generate a list of cars that he can choose on depending on the other dates from which other cars are hire from and until. I have created a query that generates all of the cars that the new customer can not use.
I have also generated a list of all of the cars, in the database.
I have created a new query takes the numberplates of all the cars and subtracts the numberplates of the cars that are being used.
This is where i hit a problem. For some reason the query is generating the list of number plates twice and then subtracting the numberplates that are being used. This leaves me with with 2 values for every numberplate that can be used and 1value for every numberplate that cannot be used. Can you help me?
Please post your email address so i can send you the zip file as the file is too large to upload. The query that i am having problems with has the title:SEARCH FOR AVAILIABLE CARS.
Thank You
Hi all,
I think this could be another one of my stupid moments. Here is my query expression -
IIf([WHAT TEAM?]=1,[strCurrent_Team]="FINANCE",[strCurrent_Team]<>"FINANCE")
When run, the user is prompted to enter a team number. If they enter 1, then by my reckoning the query should return all records where [strCurrent_Team] = "Finance".
However, no records are returned.
strCurrent_Team is formatted as text.
Can anyone tell me what I am doing wrong here?
Cheers,
Rob
I hope this doesn't sound too simple for this forum, I'm only a newbie!
I have a select query that will display the recordset that meets the criteria (OK I know that's not a big deal) but...I want to know if, when there are no records that meet the criteria, can I open a form (dialog box maybe) that will say there are no records found instead of showing a blank recordset. Once again I hope this is not so blindingly obvious that I have to start watching my coffee intake
Thanks in advance
Hi, i'm hoping someone here might be able to help me. I have come to a bit of a dead end with a database application i am working on.
The database is a delivery newspaper management system for a newsagents. Basically i need it to link customers to the paper they wish to receive, organise them into delivery rounds, and produce a bill for each customer based on the newspaper they get delivered.
The problem I am currently having is when it comes to the billing.
I have:
a table that stores customer details
a table that stores newspaper details (inc. price)
a table that stores the customerID and then the NewspaperID for each day of the week. (since not all customers get a paper everyday of the week)
If a customer gets two papers then two entries are made in the requirements table under there CustomerID)
Now to fetch the price of the newspaper the customer is down to receive each day and then add these all together is where i have been having trouble.
After many different attempts the solution i am currently using is this. I have a query for each day of the week. Each query take the customerID from the requirements table, then the newspaper price from the table storing newspaper details.
The problem here is that the query returns the CustomerID next to every newspaper in the database. I found the solution was this. I added the newspaperId from the newspaper details table and in the criteria stated "[tableRequirements].[NewspaperID]" And this worked perfectly.
Untill i added a customer who gets two papers. As far as i can tell the query is returning all the possible combinations of which newspaper the customer should get.
Any help with this would be greatly appreciated - thanks in advance.
I am trying to find an Access solution to handling the MAX 2/3rds (I.E. 2from3 or 8from12 etc) returns from a series of "Scores" of a league table which will have many players, playing in many matches. I have created a crosstab query which delivers the total scores for each player from each game and played around with a make table query and a report output which I have used in excel to deliver the best 2/3rds of the scores. As others will be using the completed data base I would like to keep the solution within Access but I cannot work out how or if this is possible. Below is a limited output from the crosstab query showing the Total of all games played which I wish to turn into best 2/3rds.
View 5 Replies View RelatedI am receiving the error above when I try to execute the code below. I have checked the fields in the code as well as the table and I can't see what I am missing. The tblMeasure table which is the subform have the following fields:
MUserLoginID - NumberMainMeasureID - AutoNumber - Primary KeyMeasureName - TextMPositonName - TextMeasureScore - NumberMeasureWeight - NumberMeasureTotal - NumberMeasureDesc - MemoMStaffApraisedID - Number
The UserDeatils table which is the main form have the following fields:
StaffID - NumberStaffName - TextDepartmentName - TextStaffPosition - TextStaffGrade - TextStaffBDate - DateStaffEDate - DateStaffApraisedID - AutoNumber - Primary Key
The link between the two forms are StaffApraisedID to MStaffApraisedID then StaffID to MUserLoginID then StaffPosition to MPositonName. When I select a member and click the Duplicate button I received the error above. The area highlighted in red is where it errors out.
Code:
Private Sub cmdDuplicateData_Click()
On Error GoTo Err_cmdDuplicateData_Click
Dim OldStaffID As Integer, NewStaffID As Integer
OldStaffID = Me.StaffApraisedID
'Add new record to end of Recodset Object
[Code] .....
Hi,
I'm trying to create a database project for college and have run into a problem with a query. I am trying to find all bookings that have taken place in the last month, but with added details from other tables.
I have taken the job details and date (with validation for the last month only) from my Jobs table, and this works perfectly. However, when i try to match customer IDs to their names (stored in a seperate table), Access returns the same job multiple times with every customer name possible.
Any help you can give me to return just the one result needed would be greatly appreciated.
Mompo
This is at least the 3rd time I've come across something that is, to me, an extremely serious bug in Access. Anyone else seen this, and anything I can do to avoid it??
In a query, I ask for the values from Field A.
The query returns the values from Field B, but still calls it Field A.
This is in a fairly complex query. If I delete one particular field from the query, the bug disappears. If I put that field back, the bug returns.
Here is my current query:
SELECT ByPN_1.PartNumber, ByPN_1.LostPerSetup, ByPN_1.ActualMachine, ByPN_1.PermQty, ByPN_1.FirstOfFeederSize, ByPN_1.Leaf1, ByPN_1.FirstOfType, ByPN_1.NonPerm, IIf([nonperm]*[concurrentsetups]<1,1,CLng([nonperm]*[concurrentsetups])) AS QtyIfDed, [nonperm]*[setupsperday] AS MaxLoadsSavedPerDay, [qtyifded]*[setupsperday]/[concurrentsetups] AS DedLoadsSavedPerDay, IIf([maxloadssavedperday]<[dedloadssavedperday],[maxloadssavedperday],[dedloadssavedperday]) AS LoadsSavedPerDay, [loadssavedperday]*[laborrate]*[loadunloadperfeeder]*250/60 AS Labor_Annual, master_attr.STD_COST, [loadssavedperday]*[lostpersetup]*[std_cost]*250 AS Parts_Annual
FROM (ByPN_1 LEFT JOIN FeederCost1 ON (ByPN_1.ActualMachine = FeederCost1.Machine) AND (ByPN_1.FirstOfFeederSize = FeederCost1.Size) AND (ByPN_1.FirstOfType = FeederCost1.Type)) LEFT JOIN master_attr ON ByPN_1.PartNumber = master_attr.ITEM
WHERE (((ByPN_1.PartNumber)=107573));
HEre's the pertinent part of the record from BYPN_1:
PartNumberLostPerSetupFirstOfFeederSize
107573 3 12X4
But here's what the query returns:
PartNumberLostPerSetupFirstOfFeederSize
107573 12X4 12X4
Now, if I just delete the "parts_annual" field from the query:
SELECT ByPN_1.PartNumber, ByPN_1.LostPerSetup, ByPN_1.FirstOfFeederSize, ByPN_1.ActualMachine, ByPN_1.PermQty, ByPN_1.Leaf1, ByPN_1.FirstOfType, ByPN_1.NonPerm, IIf([nonperm]*[concurrentsetups]<1,1,CLng([nonperm]*[concurrentsetups])) AS QtyIfDed, [nonperm]*[setupsperday] AS MaxLoadsSavedPerDay, [qtyifded]*[setupsperday]/[concurrentsetups] AS DedLoadsSavedPerDay, IIf([maxloadssavedperday]<[dedloadssavedperday],[maxloadssavedperday],[dedloadssavedperday]) AS LoadsSavedPerDay, [loadssavedperday]*[laborrate]*[loadunloadperfeeder]*250/60 AS Labor_Annual, master_attr.STD_COST
FROM (ByPN_1 LEFT JOIN FeederCost1 ON (ByPN_1.ActualMachine = FeederCost1.Machine) AND (ByPN_1.FirstOfFeederSize = FeederCost1.Size) AND (ByPN_1.FirstOfType = FeederCost1.Type)) LEFT JOIN master_attr ON ByPN_1.PartNumber = master_attr.ITEM
WHERE (((ByPN_1.PartNumber)=107573));
Now the query returns what I expect:
PartNumberLostPerSetupFirstOfFeederSize
107573 3 12X4
I'm trying to assign the result of an SQL query to a variable using VBA in Access. The query returns a value but the variable which it is assigned to has a value of Nothing. Here is the code snippet:
Dim queryReturnID As String
queryReturnID = "select dbo_tbl_SupplierReturn.ReturnID from dbo_tbl_SupplierReturn" & _
" where SupplierID = " & lstPOHdr.Column(1)
Debug.Print queryReturnID
Dim RecordSet1 As DAO.RecordSet
Set RecordSet1 = CurrentDb.OpenRecordset(queryReturnID)
I'm using Access 2007 SP3.
Whenever I export reports to PDF, the output appears zoomed and clipped. No extra pages are generated as they would be if I'm going over margins, it's just the report is clipped.
The report looks perfect in preview mode, and it looks perfect when going to an actual printer. However, when using OutputTo to save it as a PDF, this is when the report content is clipped.
Here is the code I'm using:
DoCmd.OpenReport MyReport, acViewPreview
DoCmd.OutputTo acOutputReport, "", acFormatPDF, "MyReport.pdf"
DoCmd.Close acReport, MyReport
I open the report in preview mode first so events are fired that show/hide various objects based on fields in the recordset.
I've tried reinstalling, and I've tried this on two different machines, one running Windows 7 and one running Windows Server 2008...both with the same results.