I have a report that has 3 sub reports in the main report but for now I will just concentrate on my main report and my first sub report. My first subreport is a bit of a nightmare as it pages and pages of just text well 3 pages. I have typed all the text in labels n the sub report and I have inserted a page break control when I run the sub report without the main report the page breaks are there when I run the sub report from the main report the breaks have gone. Any idea's how to fix this one. So I have a hughe details section with 3 page breaks that only work on the sub report that has not been opened from the main report. Once I try to open the sub report from the main report I lose my page breaks in the details section of the sub report. Hope this make sense. Thanks PWF
I have a list of jobs for a report in which there are multiple jobs per page. When there is a page break in the report some jobs are being cut off and then started on the next page. I do not want any information from a job to be seperated by a page break. I just want a page break to occur after a full job listing. I don't mind if the page is short, just don't want any jobs broken up. Is there a way to accomplish this??? Thanks.
I have a report based on main database that list all "Sites" by Manager, when i open the report it gives me all the details that I want, what I would now like to do is page break at the end of each manager, in addition the each record as a "completed" and "active" field I only want to show on the report the "Active" Records. ie:- After it reports all the Active marked sites for 1 manager is starts the second manager on a new page, can this be done? and how do I do it?
I print a report onto labels (Avery 5960: 3 columns of 10 labels on a letter sized piece of paper). The report and labels print fine BUT...
I need physical page breaks between certain sections. When I click on "keep whole group together on one page" in the "group by" section of the report, it starts a new COLUMN of labels (which Access sees as a new page), but does not force an actual new piece of paper.
I created a form with a memo field. Data is entered. How do I get the data to print on the report on separate lines rather than one continuous paragraph? For example: Entered in form:
2/1/15 visit to house. 2/2/15 ordered new locks for doors. 2/5/15 Locks installed.
Print view on Report:
2/1/15 visit to house. 2/2/15 ordered new locks 2/5/15 locks in stalled.
I have some mouse hover effects on some labels to help my database look better. I recently tried to make a multi-page form, but for some reason the effects won't work on my 2nd page.
I can press page down, or use docmd.gotopage 2 and the effects won't work. So to test things out, i added a vertical scrollbar. If I use the scrollbar, my effects work fine, but in my final design, i don't want a scrollbar, i want a multi-page form.
Is there any other way to get to a 2nd page that won't disturb my mouse hover effects?
I have an asset data base to generate individual asset detail reports with a sub report on the same page listing similar assets from a separate query. I have set the master and child fields, one to many. This works perfectly for the first two assets (pages), however the sub report stops showing data on the third asset (page).
Question: I have got one report showing the details and one report showing the totals of these details. How do I combine this to one report showing the totals at the end of the details, ie. not on every page?
I am trying (an failing) to create a report which best fits into A4 size paper. Requirement is border all arround.
I am attaching a sample report output of my db in which
See, Additional Techno-Commercial and below data are in Report footer. So problem is if there is single result in details above footer, then this footer comes up and report covers only half of page.
What is required is footer should be a fixed lower position and if data above is less it should be blank but a border should be there.
Hi I have created some reports but find difficult to keep permanganate page set up for that reports. I go to design view and do page setup with required margin and Portrait or Landscape set up and preview that reports looks fine. After saving again I check still its fine but once I close that database and reopen again some of reports page setup becomes Portrait with 1" margin on all sides (Not All reports). I cannot solve this. Can any one help?? Funny part is even I copy that report and change data source of that report it changes page setup :confused:
I have a report that is several pages long, the page footer I want to show only on the last page, how can I work out a counter/indicator to know which is the last page and be able to set the footer fields to visible
Viewing a report from an Access Webpage... I can not, unlike from a form, create a button to view a report. Is there anyway around this? Is there no functionality to display the report as an html page or so?
I have several reports in my system. Some are landscape and some are portrait. Occasionally the landcape ones switch to portrait taking up two pages each. In preview mode it is not so bad that the user can reset the page size, but when one is sent to print this is most certainly annoying.
I need to print data on a pre-printed letter-sized piece of paper that will be cut horizontally into three identical 8.5" x 3.667" forms.
For the life of me, I cannot figure out how to format a report to get the data in the right spots. I've tried messing with the margins, height of the detail area, columns...everything I can think of. It seems I can get the data to print in the right spot on the top form but neither of the other forms and/or on the top two but not on the bottom at all.
I have a report detailing a summary of a patient's medical history however it is printing one patient per page whereas there is plenty of room to print multiple records per page.
I the report set to sort on surnames but have changed all the sorting and grouping criteria as far as I can see.
I'm using Access 2010.My reports are all crowding the left margin, with the reports printed in Landscape being the worst.My Page Setup shows Top and Bottom margins are 0.2 inches, Left is 0.35 and Right is 0.213.
Paper size is 8.5 x 11, in Landscape Mode.
1 column.
Column is 10.4"
I'm getting that error that says that the report is wider than the paper so I may get blank pages, but I don't. It just prints the 6 pages of the report.The Report Property Sheet says the report is 10.5104" and I cannot for the life of me get that to change.
When it prints, there is absolutely no margin on the left side (in landscape mode). When the report renders on the screen, it appears to be perfectly aligned.Reports printed in Portrait mode have extra white space at the top, with the footer being printed right along the bottom edge of the paper.
I have a report that is generating a few pages, but I am only interested in the first page only. I have tried adding in code to cancel everything after the first page, but this just gives me a blank second page:
Code:
Private Sub Detail_Format(Cancel As Integer, FormatCount As Integer) Cancel = Me.Page > 1 End Sub Private Sub PageFooterSection_Format(Cancel As Integer, FormatCount As Integer) Cancel = Me.Page > 1 End Sub Private Sub PageHeaderSection_Format(Cancel As Integer, FormatCount As Integer) Cancel = Me.Page > 1 End Sub
I am outputting this report to PDF, and it is very annoying to have a blank page.
Is there a way to force the report to only be one page in length.
We recently converted to Access 2010 after using 2000. This problem has suddenly appeared. It doesn't happen on every report but there is one in particular right now and I can't figure it out.The first page of the report is complete but it prints a second page containing only the page header and footer, the rest blank. There are only 2 detail records on the first page and plenty of blank space.
It's not the issue of the page overflowing onto extra pages because the page size bleeds beyond the margins. Everything is safely inside the set margins, and in fact as a test I brought the page width down to 4 inches with .5" margins and it still prints a second page.
I am having a DB and a report is there from query now what i want is ;
if query fields are apple, bat, cat, dog, elephant and I want in report the first three fields like apple, bat, cat to be displayed at first page then remaining on next and so on. Whereas I have a proper report header and footer which I do not want to change for any page means will remain same for all pages..
I have a 14 page report in which I want the footer to appear only on the first page. I accomplish this with some code in the OnFormat event of the page footer:
If Page > 1 Then Me.PageFooter2.Visible = False Else Me.PageFooter2.Visible = True End If
The first page has the footer (great).
The 3rd thru the 14th page does not (great).
The 2nd page also doesn't have the footer - but - it only shows a half page of data! The data continues where it left off on the third page!
So, to sum up:
1st Page: Footer with detail section containing 16 rows of data.
3rd thru 14th Page: No footer section with 28 rows of data.
I have a complicated report in which there is a main report which contains other reports within it. One of these reports (call it "Number Six") within the main report has several subreports. Within this report, I can successfully cancel the subreports so that they do not print if the data does not match the right criteria. I use VBA code to cancel the Number Six report if none of the subreports will be printing. Nothing then appears on this individual report. All I get is a blank page which makes sense since I've shrunk all of the subreports.
When the main report prints, the Number Five report prints, there is a blank page for the Number Six report and then the Number Seven report prints. How do I get the main report to not print that blank page for the Number Six report? When the Number Six report will result in a blank page, I want the Number Five report to print followed by the Number Seven report. I've tried using "No" in the main report for the Enabled option for Number Six but the blank page still shows up. I am not forcing any page breaks either.
