Hi All,
I have a parameter-query and when you execute it and 'fill in' the parameter it takes a very very long time when the results are displayed on the screen.
Now, that seems normal if you have a very large table, but when I enter the parameter in the criteriafield manually it displays the results immediately. Very strange. I have indexed the field so that cannot be the problem.
Does someone know what I do wrong?
I need criteria for a query date parameter: if I press enter in the empty box I get all dates. Please help
View 1 Replies View RelatedProblem:
I have a datediff function as a field in a query:
DateDiff("d",[ClientHistory].[Date],Now())
When I put in the criteria: >30
I get two results based on the datediff values equal to 37 and 110 for the two records.
Now problem: when I use >[Enter value] for the criteria and enter 30 at the prompt. I only get the record with 37, even though 110 is higher...
It seems very inconsistent based on the values I enter at the parameter. Have you ever experienced this or know what might be going on? All works fine if I hard enter the number in the criteria of the query, but not when I use a parameter.
I'm using Access 2000 on Vista and XP - both systems have the problem
In MS Access 97 I have a basic query based on a single table. When I use "Between [Start Date] and [End Date]" as the criteria in a date field it returns incorrect records.
It works correctly on date fields that are not calculated but not on the date field that is calculated. If I type in the actual dates in the criteria (instead of the prompts) it returns the correct records.
Is there a solution to this behaviour? I need the users to be able to input the dates.
Thanks.
P.S. I have tried using the base query as a subquery but I still have the same issue in the second query based on the subquery.
It is possible to create a parameter query in Access that will search for records that match the parameter entered by the user AND contain all other records that have that value plus other text.
For instance you may want Access to return all records that begin with the letter Q.
To do this you need to enter the following expression into the criteria row:
Like [Find records beginning with:] & "*" Or Is Null
The user can enter a Q and the criteria concatenates the wildcard character * to this parameter value, to find all text strings that begin with a Q.
By also using Or Is Null in the criteria the user can enter a blank value into the parameter query to return all records, even if this field is blank.
But how do I search if i want all the records with John anywhere in the field???
Hello Everybody,
I have an append query that contains a parameter [PTIdent] under the field named PTID. I would like to be able to set the parameter through VBA from a control on a form eg Form!PTID
I use the following code as normal
Private Sub Command19_Click()
On Error GoTo Err_Command19_Click
Dim stDocName As String
stDocName = "apNewPres"
DoCmd.OpenQuery stDocName, acNormal, acEdit
Exit_Command19_Click:
Exit Sub
Err_Command19_Click:
MsgBox Err.Description
Resume Exit_Command19_Click
End Sub
Is there a way within this code to do this? I realise I could set the form criteria within the query itself. However I wanted to be able to use this query from multiple forms.
Thanks for any help
I have a table that has three columns: Nationality, Gender, and Date. First I had the problem of grouping the Nationality column by Gender. That i resolved by creating a crosstab query. Now, I want to put a criteria on Date field so that when the query is run it will ask for the date input and will only show the Nationality and Gender result for specific dates. But when I write something in Criteria field it shows an error saying: "The Microsoft Access database engine does not recognize "[Registration Date]" as a valid field name or expression"..
View 3 Replies View RelatedHi,
Need advise on how to display on my report the criteria that i had specified in the parameter query even if the result is nil.
How can this be done??
Thanks!
I have one form which have two multiselect listboxes. They work, but every time when I choose id_organizacija from listbox popup enter parameter value comes up.
I am already tried to put id_organizacija in [ ] but that didnt solve problem.
Code:
Set ctl = Me.lstEmployees
For Each varItem In ctl.ItemsSelected
strWhere = strWhere & ctl.ItemData(varItem) & ","
Next varItem
Set ctl = Me.lstOrganizacija
[Code] ....
I'm trying to create an query that has two separate expression in it and a date selection criteria. The first expression is,
Expr1: DateDiff("s", [Arrival Time 1],[Departure Time 1])/3600
and the second is,
Expr2: IIf([Expr1]>[Hours Per Day],[Expr1]-[Hours Per Day]
When I run this query it asks me for the date (which is fine) but then it also pops up a box asking for "Expr1". How can I get "Expr2" to use the value returned from "Expr1"?
I had an issue with writing LIKE statements in query criteria yesterday [URL]....
The answer they gave worked perfectly when I only used a single table in the query. But as soon as I did an INNER JOIN with two other tables, now I get parameter value prompts when I open frmSearch, and instead of seeing ALL my records when the controls are left null, I get only the first record in the table.
Here's the SQL of the query, can you point out what I messed up? NOTE that this SQL was 'written' by Access.. as I used the Query builder to set all the 'Like or Is Null' statements, then clicked SQL and sorta formatted the code so I can see what I'm looking at (instead of superthick wall-o-code):
Code:
SELECT tblPeople.name, tblPeople.num
FROM (tblPeople INNER JOIN tblAddresses ON tblPeople.name = tblAddresses.name)
INNER JOIN tblPets ON tblPeople.name = tblPets.name
[code]....
Basically, this is a searchable database of participants in a pet-adoption program, along with the participants' pets history and address history (hence the linked tables as opposed to additional columns in one single table for pets and addresses... there are more than one in some cases). The frmSearch allows a person to run quick searches based upon ANY item in the database, such as name, pets, addresses, pet age, pet type, county of residence, etc. I need to be able to pick ANY field on frmSearch and type a value, and have the qrySearch return records for ANY record's related column wherein any part of it matches what I typed.
The statements as written worked PERFECTLY right up until I added the INNER JOIN. Now I get a set of parameter value prompts for every field on frmSearch that's referenced in the SQL for EACH table I linked to tblPeople, and if I leave everything null and click Search, I want to see EVERY person, but I'm only seeing the very FIRST person in tblPeople.
I've created a farm database, with a form (frmSearch) that will allow user to filter data. The form comprises of combo box and list box etc... for the user to input their own criteria. The subform below has a datasource. The data source is based on a query (qContractionSearch) which is basically a parameter query with 3 tables. The problem is, however, that it won't work with 3 tables... but will work if data source comprises just one table.
See the farm database attachment...and go to frmSearch...then go to Contraction tab. (The Cattle tab filter works fine-it only has a single-table datasource).i have a requery macro which runs whenever the user clicks 'search'.
I have a report that is fed by a parameter query. When a command button (Command23) is clicked a parameter box opens and the user enters a subsystem number. A report for that subsystem then opens.
I want to open the report with VBA and show a message if the user has failed to enter a subsystem number in the parameter box and just clicked OK.
The problem is I don't know how to refer to the parameter box and detect if it has been left empty before clicking OK. I first tried to use IsNull in an If statement with Command23.Value, but now realize it is the value in the parameter box I am after, not the "value" of Command23.
How can I change my code to detect if the parameter box has not been filled out?
Private Sub Command23_Click()
If IsNull(Command23.Value) Then
MsgBox "You did not enter a Subsystem", vbOKOnly, "No Criteria Entered"
Else
DoCmd.OpenReport "rptTESTInfoBySubsystem", acViewReport
End If
End Sub
My form-based search mechanism uses controls to set the parameters for the query data source.
I have one field call quantity in stock. I could you a Between and And method to allow the end user to input the stock quantity they want.
HOWEVER, i would love it for the user to first select the Comparison Operator (e.g. > , <, >=, <=) from a combo box and then in an adjacent text box, enter the quantity.
The expression i entered in the query goes something like this.... Forms![frmSearch]![cboRange] & [Forms]![frmSearch]![txtQuantity]
When i try and run this, i get the message "THe expression is too complex to be evaluated".
I am trying to create a parameter query to return dates that have 2 years remaining.
For example I have dates for when mortgages expire, and I want to recognise the dates that have two years remaining using a parameter query but I can't figure out if I use DateAdd or DateDiff.
I have table which store set of number
table: parameter
field: Branch
550
660
770
880
I want to use enter query criteria so that it can filter all record from parameter table, How can I do? or any VBA code can serve same purpose?
I have a form whose data source is a select query, q3, that is built from 2 other select queries. I'll call them q1, q2, and q3. q1 is a parameter query where I enter a "Cutoff Date" that the 3 queries manipulte and generate the desired results that appear in the form. The problem is that I don't know how to capture the parameter "Cutoff Date" from q1 to display on the form.
View 2 Replies View RelatedHi,
I have a query that requires a Start-Date and an End-Date to be input by user for the Where clause. It is asking for both over and over. I've had it ask from 1 up to 4 times! :eek: Shouldn't it store the input and only ask for it once? I'm thinking that the way my query is arranged may be causing it to have to loop through that section more than once to find the data, but that's just my theory. Any help would be great!
Here is my code (abbreviated slightly):
SELECT DISTINCTROW C1.*, C2.*
FROM Pen AS C1 INNER JOIN Jobs AS C2 ON C1.subno=C2.[Jobs Acct]
WHERE ((C1.typ="SS" Or C1.typ="CC" Or C1.typ="PP" Or C1.typ="TT") And C1.stdate>=[Enter Start Date] And C1.stdate<=[Enter End Date] And C2.[Type]<>"EE" And C2.[Type]<>"QQ" And C1.entdate<=C2.[ChangeDate]+60);
I'm selecting rows from "Pen" and "Jobs" that have the same subno/Jobs Acct numbers (text), then there are criteria for "Pen" types, user inputs criteria for date range (Start Date and End Date) and there are criteria for "Jobs" types. Finally, there's a cross-table criteria based on a date field ("Pen" entdate should not be more than 60 days past the "Jobs" ChangeDate). Tables are in quotes in my explanation here.
So running the above, it asks for user input "Enter Start Date", then again for "Enter End Date"...but then it asks for each again...and again...and sometimes again!
Help! :confused:
P.S..I didn't notice this repeating until I made it user input (parameter query) because it was using whatever dates I hard-coded in there before.
I have set up a database that stores actions (i.e jobs). In the table; two of the fields are...'required completion date' and 'actual completion date'. I wish to lookup, by using a query, all of the open actions (those which havent yet been complete (i.e the 'actual completion date' is null)) and then later on all those which are overdue (i.e the 'actual completion date' is null And the 'required completion date' <today....this being the criteria for an overdue action).
However, I have used a form which has a combo box which contains the values open and overdue. When a selection has been made I want a form to display with the results depending on the selection that has been made. I am capable of creating a form based on a query, but am unsure of how to construct the query with the correct criteria based on the option that is selected from the form.
Any help would gratefully be appreciated. Thanks
I created a form that allows the user to choose the criteria that they want to see on a report using =Forms!formname!controlname in my query. It works great but I want to also allow the user to choose nothing and return all records instead of limiting them to choose just one type of record. Is this possible? Before I created the form my query had the [Enter parameter] on one criteria line and [Enter parameter] Is Null on the next criteria line and that was working great for my use but I need to create a simple form for other users.
View 1 Replies View RelatedI have data for hundreds of stores. The data was pulled for the top 15 items by store, so I cannot obtain only the top 5 items that I need. How can I query this data to extract only the top (or bottom) 5 Subjects, by store, based on the percentage column?
StoreSubjectSalesSales %
1516Fiction56431.5-24.15%
1516Audio Unabridged1650.8-231.04%
1516History / Military History10081.1-29.99%
1516Role Playing / Graphic Novels14773.9-20.27%
1516Mystery13152.6-19.84%
1516Audio Abridged1785.9-141.84%
1516SciFi / Fantasy27535.3-7.93%
1516Juv Audio/Video1580.6-100.13%
1516Biography8103.6-15.89%
1516Sports7910.8-15.64%
1516Current Affairs / Law8141.9-14.34%
1516Reference7183-16.22%
1516Juv Non-Bk4585.9-25.02%
1516Science / Tech2961.4-33.98%
1516Movies / TV / Music / Dance3395.3-29.46%
1872Fiction307344.3-7.49%
1872Business134307.5-13.48%
1872Psych / Self Improvement100650.4-10.05%
1872Audio Unabridged29165.9-27.32%
1872Cookbooks57463.3-13.56%
1872Computers59235.7-12.37%
1872Regional59883.4-11.22%
1872Health & Fitness64713.8-10.29%
1872Maps19358.4-27.66%
1872Current Affairs / Law47927.1-11.08%
1872Travel Foreign42583.7-12.27%
1872Religion / Bibles80255.6-6.07%
1872SciFi / Fantasy67641.4-6.49%
1872Study Aids / Notes38299-11.24%
1872Games41745.1-9.79%
Hi all,
Can i populate a parameter just like i populate a combo box?
I want to have a FIXED value for parameter. May I know how to do this.
Thank you
Hi,
I am creating a database for work and I keep getting a message that pops up when I opn my form that says "tblClientBFinfo.ClosedReason". Then there is a place to enter a value and and it says "ENTER PARAMETER VALUE." I know it is a problem with one of my tables, specifically the "closed reason" field in the table. But I odn't know why it is asking me to enter a parameter value. Could anyone offer help?
Thanks!
I need a new parameter in my query. When I open the query i need the parameter to be asked in a combo box or drop down box or any way to select the value from the groupo other than typing.
View 1 Replies View RelatedI need a new parameter in my query which enables me to select from a field in the table rather than typing .
View 1 Replies View RelatedI want to run a query automatically in the gotfocus event of a field within a form.
Prior to the gotfocus, a value is entered in an unbound text box on the form and I want to use that value for the maximum value in the parameters. I will set the minimum to zero.
My code errors in the where, it has no problem with the serial number but I can't seem to set the deliv_no to pull the value entered on the form.
SELECT Sum(VOLTEST.unc_del) AS SumOfunc_del
FROM VOLTEST
WHERE (((VOLTEST.SERIAL_NO)=[Forms]![largeVolume1]![serial]) AND ((VOLTEST.DELIV_NO)>0 And (VOLTEST.DELIV_NO)<=([Forms![largeVolume1]![No_del])));
I figure this is a syntax problem. Can you guys see where I have gone wrong?
I need the value to write to the table, not the form when this runs.
Thanks, GG