I have a listbox on a form and I want to refer to the second column and use this value in a parameter query.
I'm using the syntax
Forms!formname!listboxname.Column(1)
but it doesn't work. I have attached the problem.
Hi all,
stuck on this, not sure if it can be resolved....
I have a parameter query for which the parameter is based on a form field entry (i wanted to avoid the dialog box popping up).
No problems with this....however, I want to create a chart based on the same query however, i get the following error message because it does not recognise the query parameter.
Error Message: The Microsoft Jet database engine does not recognise '[Forms]![frmChooseDTDate]!DateOccured' as a valid field name or expression.
Can this be resolved?
Help most appreciated!
regards to all
K
I have a list box called "product list box" based on a query called "searchqry", i also have another listbox called "type list box" , how do i get the type list box to only show "types" based on the section in products list box?
View 1 Replies View RelatedI have a form which uses a parameter based query to present an individual senior doctor with a list of names for of individual juniors to provide an assessment report on. When the first form opens the user enters their RespondentID.
Once senior has decided which names to comment on I have another form which has the questions to be answered which is opened by clicking a button on the first form.
How can I pass a parameter from the first form to the second so that only the records relevant to that senior doctor are displayed? The underlying table has 60 senior doctors and 20 junior doctors. The senior doctor is identified by the field RespondentID in the first form. I've tried putting a WhereClause in the FormOpen command but I still get a dialogue box asking for the parameter RespondentID when the second form is opened.
I have a list box that is correctly listing resources from a table (tblResource). I would like to select one of the list box entry and run a query against the tblResource to show the information for that resource in a form. I have tried to use the lstindex with the control (lstResource) in the where clause of a query to accomplish this with no success.
View 5 Replies View RelatedWithin a query, I'd like to reference another query field based on a date specified as a parameter.
In my query, there are fields for each month: [January],[February], etc.
I have a field titled [Current Month], based on the parameter [As Of Date]. So if when running the query, the parameter pops up and I type 5/6/2013, it knows that the month is May. I know how to return May in the current month field (format([As Of Date],"MMMM"). But how to I return the value that is in the May column?
I'm trying to export a report based on a query which has a parameter.
this parameter has to come from the recordset.
now if i run the procedure it asks me for the parameter.
How do i get it to take the parameter from the recordset?
it should take the column 'Company#' from the recordset
here is what i have now:
Public Function mOutstandingInvoices2()
On Error GoTo mOutstandingInvoices2_Err
Dim rst As Recordset
DoCmd.SetWarnings False
'On Error GoTo BREAKOUT
[code]....
My form-based search mechanism uses controls to set the parameters for the query data source.
I have one field call quantity in stock. I could you a Between and And method to allow the end user to input the stock quantity they want.
HOWEVER, i would love it for the user to first select the Comparison Operator (e.g. > , <, >=, <=) from a combo box and then in an adjacent text box, enter the quantity.
The expression i entered in the query goes something like this.... Forms![frmSearch]![cboRange] & [Forms]![frmSearch]![txtQuantity]
When i try and run this, i get the message "THe expression is too complex to be evaluated".
I have a parameter query that contains information on a list of people and contains 3 checkboxes: alumni, parent, business
In this query, I am trying to use parameters to filter the results based on these three fields i.e.
true, false, true would return all records where either alumni, business or both are true, and parent can be either true or false.
false, true, false would return all records where only parent is true, and the other fields do not matter.
When creating a query I have set up a parameter query as instructed (in this case searching for a name) but when I run the query it returns the error 'this expression is typed incorrectly etc.'
I have worked out that this must be due to the fact that the names are not typed in by a front-end user but need to be chosen from a dropdown list (which i have stored in a separate table) - So, the query seems to fail based on that.
I've a method **querylistboxitems** and i want to call this method in several click events, only difference is listbox,dropdown values change based on the event i call.
Code:
Public Sub querylistboxitems(lstbox As listbox, dropdown As ComboBox)
Dim drpdwnvalue As String
drpdwnvalue = dropdown.Value
With lstbox
//do something
End with
End Sub
And I'm calling this in the buttion click event by passing the listbox names as **List_Compare** and **Select_CM_Compare**
Code:
Private Sub Command_compare_Click()
Call querylistboxitems_1(List_Compare, Select_CM_Compare)
End Sub
But the values passing to the function are not control names, control values i.e corresponding control selected values.
I want to use listbox name in **lstbox**, not the value.
Hi, I'm new here, so I hope I'm posting this in the correct place. I've searched the forum to see if there are any existing threads that might help me, but I've not found anything that does...
(I think this thread ( http://www.access-programmers.co.uk/forums/showthread.php?t=93444&highlight=Copying+data )may be trying to achieve something similar to me, but I'm a beginner and don't really understand it)
I shall stop waffling! I'm not entirely sure that what I'm trying to achieve is possible, I expect it probably is!
Right, I have a form (frmGroupRegister, which contains exactly the same fields as the table it comes from, tblGroupRegister), which consists of three things:
-GroupDate - The date a group took place on. It is my primary key, as no more than one group occurs on a specific date.
-ParentList (A listbox which contains a query showing the ID number, forename and surname of everyone in a table, tblParentDetails)
-ParentsAttending (A blank listbox)
I would like to place buttons in between the ParentList and ParentsAttending, which would allow users to conduct a 'register' of attendance by copying individual/multiple details from ParentList into ParentsAttending (much like you get when choosing which fields to include in a form when using a wizard for example). I would also like them to be able to remove people from ParentsAttending by using a button in case of accidentally adding the wrong person into the ParentsAttending box.
I'm aware that another, probably simpler way of achieving this would be to use a tick-box system, but I feel that visually, the first method would both look better and demonstrate who is present more clearly.
Any help would be much appreciated, but my Access skills are quite basic and things will probably need to be spelled out for me.
I'm using Access 2000 and Windows XP.
Thanks for your help,
Alice :)
Hi,
Based upon the parameter given i want to run different queries
i need to do the below in one query.
PARAMETERS Proj Text( 30 );
If proj="All"
Select * from TbProj
else
Select * from TbProj where Proj_ID=proj;
I want to build an access query like above.
I don't know whether it supports using IF statements.
how to do the above.
Thanks.
I have a list box that is populated based on a table. now I have three labes that are also added to the form. What I will like to do is....
ListBox (3 colums)
On Double Click (listbox)
Set Label1 to the First Column.text in the list box
Set Label2 to the Second Column.text in the list box
Set Label3 to the Third Column.text in the list box
What i'm looking for is a way to update my labes based on the selection I make in the list box.
kind of like a confirmation.
On Double click it will show on label and it will act as a confirmation.
This customer(record) has been selected!
If there is another way to kind of show this same functionality please tell. I'm kind of new at Access but a master in Excel so I'm not affraid of VBA.
Thank you in advance.
Hello !
I am a newbie in access and would appreciate if someone could help me with a delicate problem i have
I have listbox in formA named "Liste1", this listbox contains a departmentvalue (unique) in the first column shown in the listbox.
What i want to do is open a new form (frmStructureDetails) by doubleclicking on the listbox, and i want the new form to load with filter on that department. Btw the departmentvalue is textformatted.
The result i get is a dialoguebox opening and not seeming to recognize which value to use, if i fill inn the value i clicked on the form loads with the correct data.
What am i doing wrong:
Private Sub Liste1_DblClick(Cancel As Integer)
On Error GoTo Err_SearchList_DblClick
Dim db As DAO.Database
Dim rst As DAO.Recordset
DoCmd.OpenForm "frm_StructureDetails", , , "[Department] = " & Me.Liste1
Exit_SearchList_DblClick:
Exit Sub
Err_SearchList_DblClick:
MsgBox Err.Description
Resume Exit_SearchList_DblClick
End Sub
I have 2 form ( Form A & Form B )
Form A contend Contain ListBox
Form B contend Contain bound Text box
I need to know how when double click ListBox at Form A passing value of listbox.Column(0) to bound Text box at Form B.
I have a form which has a listbox listing all the letters a student has had sent home. Basically i want to be able to click on a letter in the list box and for a popup form to open with the record details. However it just brings up a blank record.
The list box has a unique field called standardletterID.
the code behind the button to filter was just used through the wizard to open the popup form is:
Dim stDocName As String
Dim stLinkCriteria As String
stDocName = "frmstandardletterspopup"
stLinkCriteria = "[StandardLetterID]=" & Me![List0]
DoCmd.OpenForm stDocName, , , stLinkCriteria
but it doesnt seem to be working :(
I thought this would be easy but no matter how much i destroy my database trying to do it its not playing ball!
Hi
I have a form which displays records of our products, on that form I have now put a list box which displays the ancillaries to the products.
both the form and the list box run off queries.
I have the same unique identifiers in both queries.
I need to filter the listbox by the unique identifier every time I move record.
At the moment the list box stays populated with all the ancillaries, how do I filter it programatically to list only the ancillaries with the same unique identifiers as in the current record?
Thanks a million....
So I have a Tab control. Each tab is assigned to a specific user (which is controlled through another form). So If I assigned Page1 to Smith then Page1 caption reads Smith. Within each page is a list box that is filtered based on what name is in the caption. This works perfectly. My problem is I have another list box that is not within the tab control. I wan this to be filtered based on what tab is active. Both list boxes are bound to a query.
View 4 Replies View RelatedI have a form with a listbox that allowed multiselection.
The listbox depends on the field "name"
And I have a table "names_should_be_selected" (fields: name, date ...)
It would be great if alle names in the listbox are selected when the name is in the table "names_should_be_selected".
I designed a simple form that has a listbox and a subform. I am using Northwind database for testing.
I would like to be able to display on a subform only records based on a value of a list box.
I created a listbox using a wizard and selected an option 'find a record on my form based on the value I selected in my list box'. This kind of works but it does not display all records matching criteria.
Attached print screen 1 shows my table and there are six records for 'Las Vegas' but my sub-form displays only three for Karen Toh (print screen 2) and all records for John Edwards are missing. I am not really sure how to fix this problem.
Ideally I would like to take this a step further and do another list box with Last Name and then filter data even further down so for example if I select Last Vegas and Edwards then the form would show me only matching records.
I have a form with a Listbox which lists Customers and a variety of customer information
I also have a table on the form that lists the donations that customers have made.
How can I populate the Table based on the customer that is selected in the Listbox?
There is an ID field that links Customers with Donations
I'm guessing I need some code in the ListBox_CLick() event that triggers the table to query or to Load with a query based on the ListBox.Column(0) which contains the ID?
I'm using a sub form to display data form a table. The users wanted it display like a spread sheet. In order to get all the data to display on the same page I am trying to break some of the longer feilds out (i.e. comment field) and display them in a list/text box and not in the table with the smaller fields.
Basically what will happen is when a record is selected in the sub form the comment field tied to each record will be displayed below. I've tried a few things but I keep getting errors displayed in my list/text box (#Name?)
I have to print a label quickly every time that the product hit the warehouse. The label has been created as a report linked to the query that will provide the info to the report. In order to make this report printing as quick as possible the idea is to scan the sample id from the product and once the label is printed scan the next sample and an on.
I'm not an expert on VBA but I have created the following scrip but the reports doesn't pop up.
Here is the code:
Dim SampleID As String
SampleID = InputBox("Enter Sample ID")
If SampleID > 0 Then
DoCmd.OpenReport "rptGRM_QuickPrintLabelDymo", acViewPreview, , "[Sample]=" & SampleID
Else
DoCmd.Close
End If
End Sub
I have a form whose data source is a select query, q3, that is built from 2 other select queries. I'll call them q1, q2, and q3. q1 is a parameter query where I enter a "Cutoff Date" that the 3 queries manipulte and generate the desired results that appear in the form. The problem is that I don't know how to capture the parameter "Cutoff Date" from q1 to display on the form.
View 2 Replies View RelatedI have a listbox with several options.
When the user selects one of these items, i want a combo box's text to be changed to the selected item in the list box.
The listbox is named : D_OutputLsb
The combobox is named : D_ComponentNameCmb