Can someone get me started in the right direction?
I have an unbound field on a form "txtScan". This field is populated by a barcode scanner.
The data looks like this ~Field1~Field2~Field3~Field4~Field5~Field6~Field7~ Field8~Field9
I am using ~ as a delimiter. Since I am encrypting the barcode, I can pretty much do anything to the barcode.
I need to parse
~Field1~ into txtFirstName
~Field2~ into txtLastName
~Field3~ into txtCompany etc.
A key point is that one of the fields may be blank so, if field 2 in the string is blank, "Field2" does not get populated.
I've never tackled anything like this before and don't know where to start.
In a query, I have the following data. If a number has more than six digits, I need to parse past the fifth digit and that becomes a new field. If it has five or fewer digits, no record is entered into Column2. For example:
Here is what I need to do: I have 1 table that contains groups responsibilities, there is a field Code-group that the initiator uses to track the groups & their % of impact to the overall project hours. Sadly enough he enters the data as such (EX: PROJECT1 GROUP1-25%, GROUP2-50%, GROUP3-25%.
The problem is that he has varied instances of groups listed in each record & wants me to be able to parse the data out regardless of how many groups are listed. I know how to parse data when there are a specific number of groups what I can't figure out is how to parse data regardless of how many groups is in the field.
I've got a Table with a string of data delimited by an "*". The first part of the string before the "*" can be variable in length, so if I use a LEFT expression to break apart the 2 parts of the string on each side of the "*", my results are incorrect. In MS Excel, I can use the following formula to solve the problem:
=LEFT(B6,(FIND("*",B6)))
You are just substituting the number of positions with a Find command that looks for the "*", and returns anything left of the "*". Unfortunately, the brilliant programmers at Microsoft, once again, don't have an Excel function in Access. how to recreate that functionality in a table in Access?
I have a Date Field and I would like to complete another field depending upon the contents of that date field.
In this way: if the Date is, say, 4/27/12 I want the other field to read: April 2012 and so on. Reading the month, putting it into words, reading the year, writing it out. This second field is NOT a date field.
I've built an HTML web form that sends an email to me upon submission with all the field inputs. I have previously found success using VBA in Outlook to parse out these emails and feed the substrings into an Excel Sheet (hooray!), but now am looking to feed the substrings into Access, specifically into a table in an existing .mdb file. I figure the way Outlook will "talk to" Access will likely be a bit different from the way it does for Excel.
The way my previous script engaged with Excel was through a rule; every time a new email was received, the following script would run if the message had the subject line generated by my web form. The script would check whether Excel and the target workbook/sheet was open, act accordingly, and then input the substrings (I've excluded that part below), then return Excel and the wb/ws to their initial state. I imagine though, that with Access I might be able to feed the substrings into the .mdb without having to open it proper, the way a front-end talks to a back-end. But perhaps I'm mistaken on that front.
Code: Option Explicit Option Compare Text Public Const xlUp As Integer = -4162 'I genuinely do not know what this is _ about. It came with the initial _ borrowed code. Public Const wbPath As String = "C:...Workbook.xlsx" 'Workbook path
I have a process which imports a txt file into a memo field of my TBLORIGINAL table Each file may have one record or it may have multiple records Every record begins (exactly) with
Quote:
FRE Order Order RAD ShipDate Customer City State Postal Code
For each record in the memo field, I need to create a new record into my TBLPROCESSED table
This can probably be done while it is importing but I need to keep the original file intact
I suppose I could copy and paste but there must a vba way of doing this
I need to create a query that will parse a word and separate it into a list of letters. I have had a go myself but am unable to do it... does anyone else know what to do?
I am tring to seperate a field using a query that has data like this: 02 04 08 18 20 25 31 32 35 39 41 45.... (10 sets of numbers) into there own fields... I cant seem to find something along those lines!
I am a novice here so your patience and help is very much appreciated. I am trying to parse text from a field. Here's an example of the source data (all in "field1"):
Example 1 ***** Regular ***** Time..08:19 DATE..03/27/2008 Request NO...20081306101
...and this is how I would like it" New Field 1: Regular New Field 2: 08:19 New Field 3: 03/27/2008 New Field 4: 20081306101
Because the values change substantially, I would like to be able to select the data in between two known text strings as opposed to using the MID function, an example of which I have successfully used to return "Regular" is:
MID([field1],InStr9[field1],"*****")+6,7)
But because the values change (e.g. "Emergency") I would rather have the end point based on the string "*****" rather than a count of characters (e.g."7") Any suggestions?
I have a User Defined Type which stores an array..I have 2 instances of this UDT, one storing matched data, the other storing exception data..I was to parse these arrays to an Excel output routine. However, the parameter variable contains no data when accessing it..
Here is my code:
Code: Private Type TOutputRow RACFID As String FullName As String Access As String LastLoggedIn As Date End Type
I am attempting to create a report and pass on the information from the current form to it. It is supposed to create a student ID and I am unable to get the information into the appropriate fields.I can get all the info from OpenArgs into one box but it wont parse it all out. The Form is within a navigation form. I know the below option is not the best way to do it, but other options I have found it has issues with sending when the form is within a navigation form and I prefer not to redo the entire thing at this point to remove the Navigation form.
I am having trouble parsing the month from a date like 05/12/2007 and I want to return the leading zero with the month. Example of 05/12/2007 and I want to display 05 only.
If I have an XML file, I can load it into an XML document and parse it.
For an HTML file, I have been unable to find similar parsing methods - that is, using DOM and not involving a browser (other than simply treating the file as text). I'd prefer to avoid the browser control because it is different for a number of different Access versions, so the only option remaining that I see is to run Internet Explorer with visibility off.
Can one parse HTML using the DOM without a browser?
I have a spread sheet which on a per line basis contains columns whose cells contain the path to a file. It looks as if many of the files are tif, pdf, word and excel etc, so multiple file types.
Writing a routine which would take each row and then for each line of file paths turn them into one multi-page document - pdf or something?
I need to identify and parse (substring) a number of digits from a barcode. The barcode digit count will vary, based on the number of details included in the barcode.
For example: the barcode for GS1 DataBar begins with a 4 digit code of 8110 identifying the code as GS1. The 5th digit then identifies the number of digits directly following which constitute the manufacturers code, which can range anywhere from 6 digits to 12 digits. I need to pull the number of digits out of the barcode based on the value of the 5th digit placeholder and pull only that many digits from the string and replace them into another field. There are potentially 70 total digits in the barcode. I have only provided the first section, which I am asking the question on.
Simply put: I need to tell the substring to identify the number to parse from digit 5, (which will have a min of 6 digits and a max of 12)
How do I pull the information out of a string to create a substring in another field by first defining the number of digits to pull out (Digits 6 to 17 min of 6 digits and a max of 12 digits) based on a value within the string (digit 5= value)
So if Digit 5 is 6 the returned value would be: Digits: 6 7 8 9 10 11 (6 6 6 6 6 6 )
If Digit 6 is 9 the returned value would be: Digits: 6 7 8 9 10 11 12 13 14 (9 9 9 9 9 9 9 9 9)
The first portion of the barcode is below: There are other pieces necessary to be pulled the same way, but from other sections, and based on yet another X desinator field (the next with a min of 1 and max of 5) I assume the pull would be similarly completed.
I don't know how to write code, I have used formulas but not this detailed or specific.
Ex: I know = Min (barcode, 5, 6) would pull the 6 digits after the 5 spot, but how do I vary the 6 (count) number in the formula?
Example below: No additional spaces, dashes, letters etc. (A's = 1-4, X = 5, M's = 6-17)
Hi, i have a column with data in a query that looks like the following (p.s. sbenj, mehere,.. thanks for the advice earlier) Code:Link200-1200-1-1200-1-2200-13-1 Now everything before the 2nd hyphen is considered the base number. I.e.
Code:Link200-1200-1200-1200-13 I need to parse into a seperate field everything before the 2 hyphen.
Now i've tried the following which i thought would work, which would enable me to concatenate expr1 & expr3 unfortunately it doesn't agree with 200-1 because it doesn't have a second hyphen,
SELECT Table.Link, Left([link],InStr([link],"-")-1) AS Expr1, Mid([link],InStr([link],"-")+1) AS Expr2, Left([Expr2],InStr([Expr2],"-")-1) AS Expr3 FROM Table;
I have data from a survey with qualitative responses. For a single qualitative question, I moved the ID & responses into a new table and categorized the response according to a bucket/theme, where each column is a new bucket. I now have 10 columns. Each response is represented in 1 or more columns. I used an excel formula to copy the response data into the column itself.
Example:
A1 // B1// C1 // D1// E1//... L1 ID // Response // Cats // Dogs // Elephants //.... Column 10 1 // I like cats // I like cats //(null)//(null)// ... (null)// 2 // I like cats and dogs // I like cats and dogs // I like cats and dogs //(null)//..// 3 // etc.
However, now I'm realizing that Access always wants to show data for all records, or at most I can limit using a WHERE clause in my query.I want to use Access to generate this report:
1. Section 1: Show all responses from the Cats bucket where there is data 2. Section 2: Show all responses from the Dogs bucket where there is data 3. and so on
I know how to do summary values, and I know how to do filtering that apply across the whole report, but this seems like more advanced filtering, where I want to see selective details differently for each field.
I an trying to create a data entry form (IndividualsEntryFm) to input data for fields such as (First Name),(Birthdate) etc., these to be saved to the (IndividualsTbl)
I also have another table (NamesTbl) which has family names etc. The two tables are linked by a (MainID) field. I want a combo box on the individualsEntryFm so that I can select the family name. Then I wish the empty fields for the IndividualsTbl to be available to enter data.When I press the save button I then want this data saved, together with the MainID from the combo box to the IndividualsTbl.
I have set the IndividualsTbl with a (PersonID) field as an auto number each individual therefore has a unique PersonID but may well share the MainID. I'm trying to link many people to the same address.
Background I have a query (Q1) that retrives data from a table (Table 1). One of the fields in Table (F1) contains both text and numeric data (ie: 24 eggs). I want to separate these values in Q1.
Questions How can i in Q1 retrive only numeric data from F1 and display that data i a field? How can i in Q1 retrive only text from F1 and display that data i a field?
I have a field in a table that is comprised of mostly numerical data but some records are text.
I want to convert this field to numerical only and make a new field to put the textual data in.
However converting the field will delete the textual data. What is the easiest way to convert the field but save the textual data AND append the textual data to the SAME record that they were in originally in the new field?
How can I get the value from a field in one table (in the sub form) to copy/insert into a field in another table (in the main form) when adding a new record?The main form and sub form are linked using parent/child linking, and the sub form is in a tab.I have table A (Visit Dates) in the main form which is used to record the date of a visit to a church. Table B (Quarters and Peals) is used to record an event that took place at that church during that visit. Note that not all visits in table A require a record to be created in table B - but half or more do.
In tables A and B I have a field called "QuarterOrPealID" and these are both primary keys, though the field in table B is set to 'no duplicates' and in table A it's set to 'duplicates allowed', as table A has its own auto number/pk. They are both linked in the relationships.
So, when I add a new record to table A using the main form, I might then need to click on the tab in the sub form to create a new record in table B, which has to be linked to the same record in table A. When the "QuarterOrPealID" auto number/pk is generated in the sub form (table B), I need that value to update to the "QuarterOrPealID" field of the main form (table A), so that when I'm viewing these records the form pulls all the information nicely together.
