Is there any way to pass a variable from one criteria on a query to five other criterias in the same query.
I am using this code to select which person the query is running on
Like "*" & [Enter Part of The Landman Name or Enter For All Records] & "*"
I have five areas in this query where I would need to add the name, I just want to do it once?
Thanks.
Fen how
Is it possible to pass a variable to a form when a checkbox is clicked?
I have 8 tabs, each of which has a checkbox.
When a checkbox is clicked, I would like it to display 1 form but that form should display different data each time by either running a SQL query with specific variables passed to it or by running a different SQL query.
?
I am trying to run a pass-through query in access with a variable that a user enters in a form. I can't seem to get this to work. Can somebody please help? The variable should be where the 121212 is in the code.
Code
1:FROM doc..eco_summary es
2:INNER JOIN
3:((((mart..DM_Map dmm LEFT JOIN mart..DM_PI dpi ON dmm.Acct_ID = dpi.Acct_ID)
4:INNER JOIN mart..DM_Note dmn ON dmm.Acct_ID = dmn.Acct_ID)
5:INNER JOIN mart..DM_ACCT dma ON dmn.Acct_ID = dma.Acct_ID)
6:LEFT JOIN mart..DM_RE dmr ON dmn.Acct_ID = dmr.Acct_ID) ON es.L_loannum = dmm.Acct_ID
7:INNER JOIN weis..eco_loan_origination elo ON es.L_num = elo.num
8:where es.L_num = 121212
I have an access 2007 database connect to sql server 2008.I am running a pass though query to search between two dates (this query has been fine for years)
If I now run any search using parameters from 26th March 2014 to date - the query takes 10+ minutes to run.If I then change the date to 25th March 2014 to date - it runs in a nano second.I have not changed the back tables and I have not changed the format the data is saved in.
I am trying to figure out if this line of code is usable, but I don't know: DoCmd.RunSQL ("SELECT Max([BSRangeTbl].[Date]) AS MAXofDate FROM [BSRangeTbl];")
View 2 Replies View RelatedIs there a way to pass a variable to the GOTO statement?
View 14 Replies View RelatedI have a button on my main db, that opens a second db using hte following code:
----------------------
'Dealing with external objects, use inline error trapping
On Error Resume Next
Dim appAccess As Object
Dim db As Database
Dim strAppPathName As String
Dim strAppName As String
Dim strTimesheetPathName As String
[Code] ....
This code works great to open the other db, and handles wheter the other db is already open or not, but I cant seem to pass the variable to the other db using the startup switch /cmd.
I suspect if I used the shell method it would pass the cmd , but I havnt found any way to test if the db is already open with the shell method.
How can I pass a variable to the other db when opening it using VBA?
I have an unbound Combo Box in a form that I would like to use to set criteria in the query. How do I do this?
View 1 Replies View RelatedI have an unbound Combo Box in a form that I would like to use to set criteria in the query. How do I do this?
View 2 Replies View RelatedI have an unbound Combo Box in a form that I would like to use to set criteria in the query. How do I do this?
View 3 Replies View Related There are two forms to be filled out on Access. One (maybe two) come from our Contractor. They will input the Bill of Materials, Scrap Rates, Inventory Turns and Cost. This goes to a non-official Bill of Materials table. The second form comes from our Supplier. They will input the the cost they charge the contractor for the given Bill of Materials. Access runs a report that will automatically compare the Contractor costs with the Supplier costs for each component on the Bill of Materials. If the component costs match, it will highlight the Contractor cost green, it they do not, it highlights red.
If all numbers are green, I hit the "Approve" button on the report and there are three queries that need to be ran. An Update Query that changes all the statuses for the components from "Unapproved" to "Approved", an Append Query to add the Bill of Materials to our official table, and a Delete Query that removes the components from the unofficial Bill of Materials table. Once this is all done, an e-mail needs to be sent to Finance to roll costing for the SKU. I do not know the best way, but I currently am having getting the Code to do the following:
1. Put the specific SKU in the e-mail, which is variable.
2. Change the Criteria of the Queries so they only run for the specific approved sku
3. Get the "Approve" and "Deny" buttons on the report to only function for the specific SKU.
Currently all the SKUs that are in "Unapproved" status show on the report. Once I hit approve, it wants to approve all the SKUs, not just the one I'm looking at.
Code:
Sub Command36_Click()
'''Current Issue: Need Query Criteria to be SKU specific'''
'Update Query to change BOM status to "Approved"
DoCmd.OpenQuery "(2302) BOM - 3PM Entry Query Approved", acViewNormal, acEdit
[code]....
I have a database structure with a series of queries which are all inter-linked.
I want my database to be user friendly, what is the cleanest way to be able to enter a single variable eg as a criteria for a query - say the date, rather than having to change it in a series of queries manually, can I call it from somewhere?
Why does this work when the text box is used and not when the variable is used directly?
Code:
Private Sub Command61_Click()
Dim strDBName As String
strDBName = getDBName()
Me.Text59 = strDBName
Me.Text62 = DLookup("[ModuleName]", "tblModule", "[DatabaseName] = text59")
'Me.Text64 = DLookup("[ModuleName]", "tblModule", "[DatabaseName] = " & strDBName)
'Me.Text64 = DLookup("[ModuleName]", "tblModule", "[DatabaseName] = strDBName")
'Me.Text64 = DLookup("[ModuleName]", "tblModule", "[DatabaseName]" = strDBName)
End Sub
Text62 returns the correct value
Text64 failes on everyone of the examples
I'm trying to search for a variable (varCod) in a table(SerialNumberCustomer) but I want to only store the returned variable in an array if its shipDate is between 9/30/2001 and 10/1/2012
this is what my code looks like so far:
Set rst = CurrentDb.OpenRecordset( _
"Select * from SerialNumberCustomer WHERE SerialCardId = " & varCod & " AND (ShipDate BETWEEN #09/30/2001# AND #10/01/2012#) ")
The line of code works and it returns all of the values in SerialCardId where it's = to varCode but it doesn't go through with the shipDate requirement. It's instead returning all of the dates with the found value.
I manage an Access application that in many instances uses data selected from a combo on a form for variable criteria. In this instance it is in the form of:
[Forms]![Main Navigation]![Print Menu]![SchoolYear]
I recently wrote a routing that exports to Excel based on a record set derived from a query. In testing I hard-coded the criteria (School Year) in the query. Once everything worked I sustituted the variable above. Now, in the VBA, no records are put into the recordset, when I run the queries directly from Access they work correctly, drawing the results for the school year selected on the form referenced.
'Create The Recordset
If Me.Frame11 = 1 Then
strQueryName = "ExcelHS"
GroupTitle = "High School"
Else
strQueryName = "ExcelMS"
GroupTitle = "Middle School"
End If
Set objRst = Application.CurrentDb.OpenRecordset(strQueryName)
I am trying to write a query from a main table which will show records which have a date of less than or equal to a Variable (tempvar), however the variable (selected from a form) may be left blank in which case all records should be shown.
I have successfully used the following but the records returned are only the specific date choosen not that date and all prior
Like Nz(([TempVars]![tvcldate]),"*")
So I have tried the following but it doesn't work.
Like Nz(<=([TempVars]![tvcldate]),"*")
Good afternoon, I have a form with a subform and in the first txtbox of the subform in the GotFocus event I have a little procedure which checks the txtboxs on the parent to make sure that there is data in all four of the txtboxes. This works great the first time and it pops up a msgbox and it even setsfocus on the txtbox with no data in it, but if I tab into the subform a second time and there still is no data in one of the txtboxs on the parent form, nothing happens, no message and no setting focus on the txtbox with no data in it. Does anyone know of a way to get this procedure to re-set everytime a user tries to enter the subform? Thank you in advance to anyone offering and ideas and suggestions.
View 8 Replies View RelatedI'm trying to create a PTQ and just cant seem to find the source table.
The name of the source table is PRM1_ORG_MTRX3_N
If I write my query like this, I get an error code that states username.PRM1_ORG_MTRX3_N is an undefined name. It adds my userid to the beginning of the table name.
SELECT
T128.AS_OF_DATE,
T128.LEVEL8,
T128.LEVEL8_ORG_NAME,
T128.LEVEL9,
T128.LEVEL9_ORG_NAME
FROM
PRM1_ORG_MTRX3_N as T128
WHERE
T128.AS_OF_DATE like '1/1/2007'
Then I rewrote the query like this, and I got and error code that said PRM1.ORG_MTRX3_N is an undefined name. Does anyone know what else I can try here to get this query going? Thanks
SELECT
T128.AS_OF_DATE,
T128.LEVEL8,
T128.LEVEL8_ORG_NAME,
T128.LEVEL9,
T128.LEVEL9_ORG_NAME
FROM
PRM1.ORG_MTRX3_N as T128
WHERE
T128.AS_OF_DATE like '1/1/2007'
Can you do a pass through Query to a pivot table when your query has parameters? I'm reading like you can't, but nothing has been said concretely yet. When I do it, it gives me an error "Trouble Obtaining Data" when I try and set the layout.
View 1 Replies View RelatedHi
I have created a simple query that is used as the record source of one of my forms. I want to pass the query a different criterion each time the form is opened.
Any suggestion/example on who to do that will be very much appreciated.
Thanks,
B
I have an Access front-end connected to Oracle tables. When the user opens up the main form to add a new entry, I need to be able to pull the next sequential record number. However, I can't get this to happen, without filling out the entire record, saving, and then it will committ the number.
Can this be done with a pass-through query to the Oracle table, find the next sequential number, and then add it to my record id (ie, 06-1050, with 06 being the year and 1050 the next sequential number). I do have two fields in the Oracle table TXTYear and LNGNumber. This concatenated field is related to three additional tables that have more information. Each of these tables need to cascade a new record.
Confused? me too. any help would be appreciated.
I have a VERY simple select statement that I am using in a pass-through query: "SELECT * FROM dbo_vReturn;", but I cannot get this to work. Each time I run the query it generates an error: "ODBC call failed - Invalid object name "dbo_vReturn" (#208)".
The dbo_vRteturn is a view in the backend. I can open this table/view from Access using an ODBC connection but when I try to run the pass-through query it falls over!
Does anyone have any idea what is causing this?:confused:
Hello
Any hellp would be appericated.
I have a pass thorugh query that connets to a Oracle database with a where clause with a between start date and end date.
I need the start date and End Date to come from a form within MS Access.
Is this possible? if so how do I code the where clause to get the start and end date parameters from the form?
I have a query that I want use as a pass-through query (SQL Server databases).
The query has a sub-query that references another database. The query runs fine in Enterprise Manager because EM allows me to access both databases.
If I wanted to I could link both tables through ODBC and then run an Access query that would do the same, however, I would rather use a pass-through-query for this.
The problem is that a pass-through-query in MS Access only allows me ONE ODBC connection (as far as i can tell).
My question is:
Is there a way I can run a sub-query (referencing a different database. i.e. second ODBC connection) which references a second database?
Is this possible?
Thanks
-Gary
Hi
I am struggling with what seems like should be a straightforward task. Unexpectedly however it has become an infuriatingly difficult one (no doubt due to my complete novice status).
I have a very basic d/base (3 tables) that I have been searching using basic SQL queries. I want to create a simple 'search' form that produces the results of my various queries without the need to work in SQL. Enter one or more search criteria, hit ENTER, results presented in datasheet perhaps?
Thought this would have been easy but I've had no luck. Can you please explain how I can pass a parameter from a form to a query?
Many thanks
Stuck21
I'm a couple of years removed from Access and shaking off the rust. I hope someone can help with something that may be obvious but I'm missing.
I'm simply looking to pass the begin and end dates to a query driving reports. The calendar form includes unbound text boxes, txtBeginDate and txtEndDate. My code populates the text boxes correctly; the user clicks on the calendar date, clicks the calendar day, then the Begin (or End) Date control, and each populates the respective textbox.
But when I run the query or report, I'm prompted for the parameters. This is what I have in the query's Date field criteria:
Between [Forms]![frm_Calendar]![txtBeginDate] And [Forms]![frm_Calendar]![txtEndDate]
I'm just drawing blank on what I did several years ago to make this work. If anyone can help, I'm most appreciative.